Modul:Documentation/config
![]() | Dette Lua-modul bruges på ca. 7.800 sider, og derfor vil ændringer blive bemærket af mange. Vær venlig at afprøve enhver ændring i modulets /sandkasse eller /test-undersider, eller i din egen module sandkasse. Du bør også overveje at diskutere ændringer på diskussionssiden før du implementerer dem. |
Dette er konfigurationsfilen til Modul:Documentation.
![]() | Kategori mangler Dette modul hører til i en eller flere kategorier. Kategoriser venligst dette modul ved at placere den sammen med lignende emner. Fjern skabelonen efter kategorisering. Bemærk, at kategorier påsat via skabeloner, samt meget generelle kategorier ikke bør betragtes som tilstrækkelige. |
Dokumentationen ovenfor er transkluderet fra Modul:Documentation/config/dok. (redigér | historik) Brugere kan eksperimentere i dette moduls undersider sandkasse (opret | kopiér) og testcases (opret). Undersider til dette modul. |
----------------------------------------------------------------------------------------------------
--
-- Configuration for Module:Documentation
--
-- Here you can set the values of the parameters and messages used in Module:Documentation to
-- localise it to your wiki and your language. Unless specified otherwise, values given here
-- should be string values.
----------------------------------------------------------------------------------------------------
local cfg = {} -- Do not edit this line.
----------------------------------------------------------------------------------------------------
-- Protection template configuration
----------------------------------------------------------------------------------------------------
-- cfg['protection-reason-edit']
-- The protection reason for edit-protected templates to pass to
-- [[Module:Protection banner]].
cfg['protection-reason-edit'] = 'skabelon'
--[[
----------------------------------------------------------------------------------------------------
-- Sandbox notice configuration
--
-- On sandbox pages the module can display a template notifying users that the current page is a
-- sandbox, and the location of test cases pages, etc. The module decides whether the page is a
-- sandbox or not based on the value of cfg['sandbox-subpage']. The following settings configure the
-- messages that the notices contains.
----------------------------------------------------------------------------------------------------
--]]
-- cfg['sandbox-notice-image']
-- The image displayed in the sandbox notice.
cfg['sandbox-notice-image'] = '[[Image:Sandbox.svg|50px|alt=|link=]]'
--[[
-- cfg['sandbox-notice-pagetype-template']
-- cfg['sandbox-notice-pagetype-module']
-- cfg['sandbox-notice-pagetype-other']
-- The page type of the sandbox page. The message that is displayed depends on the current subject
-- namespace. This message is used in either cfg['sandbox-notice-blurb'] or
-- cfg['sandbox-notice-diff-blurb'].
--]]
cfg['sandbox-notice-pagetype-template'] = '[[Wikipedia:Template test cases|skabelonsandkassesiden]]'
cfg['sandbox-notice-pagetype-module'] = '[[Wikipedia:Template test cases|modulsandkassesiden]]'
cfg['sandbox-notice-pagetype-other'] = 'sandkassesiden'
--[[
-- cfg['sandbox-notice-blurb']
-- cfg['sandbox-notice-diff-blurb']
-- cfg['sandbox-notice-diff-display']
-- Either cfg['sandbox-notice-blurb'] or cfg['sandbox-notice-diff-blurb'] is the opening sentence
-- of the sandbox notice. The latter has a diff link, but the former does not. $1 is the page
-- type, which is either cfg['sandbox-notice-pagetype-template'],
-- cfg['sandbox-notice-pagetype-module'] or cfg['sandbox-notice-pagetype-other'] depending what
-- namespace we are in. $2 is a link to the main template page, and $3 is a diff link between
-- the sandbox and the main template. The display value of the diff link is set by
-- cfg['sandbox-notice-compare-link-display'].
--]]
cfg['sandbox-notice-blurb'] = 'Dette er $1 for $2.'
cfg['sandbox-notice-diff-blurb'] = 'Dette er $1 for $2 ($3).'
cfg['sandbox-notice-compare-link-display'] = 'forskel'
--[[
-- cfg['sandbox-notice-testcases-blurb']
-- cfg['sandbox-notice-testcases-link-display']
-- cfg['sandbox-notice-testcases-run-blurb']
-- cfg['sandbox-notice-testcases-run-link-display']
-- cfg['sandbox-notice-testcases-blurb']
-- is a sentence notifying the user that there is a test cases page
-- corresponding to this sandbox that they can edit. $1 is a link to the
-- test cases page.
-- cfg['sandbox-notice-testcases-link-display']
-- is the display value for that link.
-- cfg['sandbox-notice-testcases-run-blurb']
-- is a sentence notifying the user that there is a test cases page
-- corresponding to this sandbox that they can edit, along with a link
-- to run it. $1 is a link to the test cases page, and $2 is a link to
-- the page to run it.
-- cfg['sandbox-notice-testcases-run-link-display']
-- is the display value for the link to run the test cases.
--]]
cfg['sandbox-notice-testcases-blurb'] = 'Se også følgesiden for $1.'
cfg['sandbox-notice-testcases-link-display'] = 'testcases'
cfg['sandbox-notice-testcases-run-blurb'] = 'Se også følgesiden for $1 ($2).'
cfg['sandbox-notice-testcases-run-link-display'] = 'kør'
-- cfg['sandbox-category']
-- A category to add to all template sandboxes.
cfg['sandbox-category'] = 'Skabelonsandkasser'
----------------------------------------------------------------------------------------------------
-- Start box configuration
----------------------------------------------------------------------------------------------------
-- cfg['documentation-icon-wikitext']
-- The wikitext for the icon shown at the top of the template.
cfg['documentation-icon-wikitext'] = '[[File:Test Template Info-Icon - Version (2).svg|50px|link=|alt=Documentation icon]]'
-- cfg['template-namespace-heading']
-- The heading shown in the template namespace.
cfg['template-namespace-heading'] = 'Skabelondokumentation'
-- cfg['module-namespace-heading']
-- The heading shown in the module namespace.
cfg['module-namespace-heading'] = 'Moduldokumentation'
-- cfg['file-namespace-heading']
-- The heading shown in the file namespace.
cfg['file-namespace-heading'] = 'Sammendrag'
-- cfg['other-namespaces-heading']
-- The heading shown in other namespaces.
cfg['other-namespaces-heading'] = 'Dokumentation'
-- cfg['view-link-display']
-- The text to display for "view" links.
cfg['view-link-display'] = 'vis'
-- cfg['edit-link-display']
-- The text to display for "edit" links.
cfg['edit-link-display'] = 'redigér'
-- cfg['history-link-display']
-- The text to display for "history" links.
cfg['history-link-display'] = 'historik'
-- cfg['purge-link-display']
-- The text to display for "purge" links.
cfg['purge-link-display'] = 'opfrisk'
-- cfg['create-link-display']
-- The text to display for "create" links.
cfg['create-link-display'] = 'opret'
----------------------------------------------------------------------------------------------------
-- Link box (end box) configuration
----------------------------------------------------------------------------------------------------
-- cfg['transcluded-from-blurb']
-- Notice displayed when the docs are transcluded from another page. $1 is a wikilink to that page.
cfg['transcluded-from-blurb'] = '[[Wikipedia:Skabelondokumentation|Dokumentationen]] ovenfor er [[Wikipedia:Transklusion|transkluderet]] fra $1.'
--[[
-- cfg['create-module-doc-blurb']
-- Notice displayed in the module namespace when the documentation subpage does not exist.
-- $1 is a link to create the documentation page with the preload cfg['module-preload'] and the
-- display cfg['create-link-display'].
--]]
cfg['create-module-doc-blurb'] = 'Hvis du ønsker en dokumentationsside for dette [[Wikipedia:Lua|Scribuntomodul]], så $1 den her.'
----------------------------------------------------------------------------------------------------
-- Experiment blurb configuration
----------------------------------------------------------------------------------------------------
--[[
-- cfg['experiment-blurb-template']
-- cfg['experiment-blurb-module']
-- The experiment blurb is the text inviting editors to experiment in sandbox and test cases pages.
-- It is only shown in the template and module namespaces. With the default English settings, it
-- might look like this:
--
-- Editors can experiment in this template's sandbox (edit | diff) and testcases (edit) pages.
--
-- In this example, "sandbox", "edit", "diff", "testcases", and "edit" would all be links.
--
-- There are two versions, cfg['experiment-blurb-template'] and cfg['experiment-blurb-module'], depending
-- on what namespace we are in.
--
-- Parameters:
--
-- $1 is a link to the sandbox page. If the sandbox exists, it is in the following format:
--
-- cfg['sandbox-link-display'] (cfg['sandbox-edit-link-display'] | cfg['compare-link-display'])
--
-- If the sandbox doesn't exist, it is in the format:
--
-- cfg['sandbox-link-display'] (cfg['sandbox-create-link-display'] | cfg['mirror-link-display'])
--
-- The link for cfg['sandbox-create-link-display'] link preloads the page with cfg['template-sandbox-preload']
-- or cfg['module-sandbox-preload'], depending on the current namespace. The link for cfg['mirror-link-display']
-- loads a default edit summary of cfg['mirror-edit-summary'].
--
-- $2 is a link to the test cases page. If the test cases page exists, it is in the following format:
--
-- cfg['testcases-link-display'] (cfg['testcases-edit-link-display'])
--
-- If the test cases page doesn't exist, it is in the format:
--
-- cfg['testcases-link-display'] (cfg['testcases-create-link-display'])
--
-- If the test cases page doesn't exist, the link for cfg['testcases-create-link-display'] preloads the
-- page with cfg['template-testcases-preload'] or cfg['module-testcases-preload'], depending on the current
-- namespace.
--]]
cfg['experiment-blurb-template'] = "Brugere kan eksperimentere i denne skabelons undersider $1 og $2."
cfg['experiment-blurb-module'] = "Brugere kan eksperimentere i dette moduls undersider $1 og $2."
----------------------------------------------------------------------------------------------------
-- Sandbox link configuration
----------------------------------------------------------------------------------------------------
-- cfg['sandbox-subpage']
-- The name of the template subpage typically used for sandboxes.
cfg['sandbox-subpage'] = 'sandkasse'
-- cfg['template-sandbox-preload']
-- Preload file for template sandbox pages.
cfg['template-sandbox-preload'] = 'Skabelon:Skabelon dokumentation/preload-sandkasse'
-- cfg['module-sandbox-preload']
-- Preload file for Lua module sandbox pages.
cfg['module-sandbox-preload'] = 'Skabelon:Skabelon dokumentation/preload-module-sandkasse'
-- cfg['sandbox-link-display']
-- The text to display for "sandbox" links.
cfg['sandbox-link-display'] = 'sandkasse'
-- cfg['sandbox-edit-link-display']
-- The text to display for sandbox "edit" links.
cfg['sandbox-edit-link-display'] = 'redigér'
-- cfg['sandbox-create-link-display']
-- The text to display for sandbox "create" links.
cfg['sandbox-create-link-display'] = 'opret'
-- cfg['compare-link-display']
-- The text to display for "compare" links.
cfg['compare-link-display'] = 'forskel'
-- cfg['mirror-edit-summary']
-- The default edit summary to use when a user clicks the "mirror" link. $1 is a wikilink to the
-- template page.
cfg['mirror-edit-summary'] = 'Opret en sandkasseudgave af $1'
-- cfg['mirror-link-display']
-- The text to display for "mirror" links.
cfg['mirror-link-display'] = 'kopiér'
-- cfg['mirror-link-preload']
-- The page to preload when a user clicks the "mirror" link.
cfg['mirror-link-preload'] = 'Skabelon:Skabelon dokumentation/mirror'
----------------------------------------------------------------------------------------------------
-- Test cases link configuration
----------------------------------------------------------------------------------------------------
-- cfg['testcases-subpage']
-- The name of the template subpage typically used for test cases.
cfg['testcases-subpage'] = 'testcases'
-- cfg['template-testcases-preload']
-- Preload file for template test cases pages.
cfg['template-testcases-preload'] = 'Skabelon:Skabelon dokumentation/preload-testcases'
-- cfg['module-testcases-preload']
-- Preload file for Lua module test cases pages.
cfg['module-testcases-preload'] = 'Skabelon:Skabelon dokumentation/preload-module-testcases'
-- cfg['testcases-link-display']
-- The text to display for "testcases" links.
cfg['testcases-link-display'] = 'testcases'
-- cfg['testcases-edit-link-display']
-- The text to display for test cases "edit" links.
cfg['testcases-edit-link-display'] = 'redigér'
-- cfg['testcases-run-link-display']
-- The text to display for test cases "run" links.
cfg['testcases-run-link-display'] = 'kør'
-- cfg['testcases-create-link-display']
-- The text to display for test cases "create" links.
cfg['testcases-create-link-display'] = 'opret'
----------------------------------------------------------------------------------------------------
-- Add categories blurb configuration
----------------------------------------------------------------------------------------------------
--[[
-- cfg['add-categories-blurb']
-- Text to direct users to add categories to the /doc subpage. Not used if the "content" or
-- "docname fed" arguments are set, as then it is not clear where to add the categories. $1 is a
-- link to the /doc subpage with a display value of cfg['doc-link-display'].
--]]
cfg['add-categories-blurb'] = 'Tilføj venligst kategorier til $1-undersiden.'
-- cfg['doc-link-display']
-- The text to display when linking to the /doc subpage.
cfg['doc-link-display'] = '/dok'
----------------------------------------------------------------------------------------------------
-- Subpages link configuration
----------------------------------------------------------------------------------------------------
--[[
-- cfg['subpages-blurb']
-- The "Subpages of this template" blurb. $1 is a link to the main template's subpages with a
-- display value of cfg['subpages-link-display']. In the English version this blurb is simply
-- the link followed by a period, and the link display provides the actual text.
--]]
cfg['subpages-blurb'] = '$1.'
--[[
-- cfg['subpages-link-display']
-- The text to display for the "subpages of this page" link. $1 is cfg['template-pagetype'],
-- cfg['module-pagetype'] or cfg['default-pagetype'], depending on whether the current page is in
-- the template namespace, the module namespace, or another namespace.
--]]
cfg['subpages-link-display'] = 'Undersider til $1'
-- cfg['template-pagetype']
-- The pagetype to display for template pages.
cfg['template-pagetype'] = 'denne skabelon'
-- cfg['module-pagetype']
-- The pagetype to display for Lua module pages.
cfg['module-pagetype'] = 'dette modul'
-- cfg['default-pagetype']
-- The pagetype to display for pages other than templates or Lua modules.
cfg['default-pagetype'] = 'denne side'
----------------------------------------------------------------------------------------------------
-- Doc link configuration
----------------------------------------------------------------------------------------------------
-- cfg['doc-subpage']
-- The name of the subpage typically used for documentation pages.
cfg['doc-subpage'] = 'doc'
-- cfg['file-docpage-preload']
-- Preload file for documentation page in the file namespace.
cfg['file-docpage-preload'] = 'Template:Documentation/preload-filespace'
-- cfg['docpage-preload']
-- Preload file for template documentation pages in all namespaces.
cfg['docpage-preload'] = 'Skabelon:Dokumentation/preload'
-- cfg['module-preload']
-- Preload file for Lua module documentation pages.
cfg['module-preload'] = 'Skabelon:Dokumentation/preload-module-doc'
----------------------------------------------------------------------------------------------------
-- Print version configuration
----------------------------------------------------------------------------------------------------
-- cfg['print-subpage']
-- The name of the template subpage used for print versions.
cfg['print-subpage'] = 'Print'
-- cfg['print-link-display']
-- The text to display when linking to the /Print subpage.
cfg['print-link-display'] = '/Print'
-- cfg['print-blurb']
-- Text to display if a /Print subpage exists. $1 is a link to the subpage with a display value of cfg['print-link-display'].
cfg['print-blurb'] = 'A [[Help:Books/for experts#Improving the book layout|print version]] of this template exists at $1.'
.. ' If you make a change to this template, please update the print version as well.'
-- cfg['display-print-category']
-- Set to true to enable output of cfg['print-category'] if a /Print subpage exists.
-- This should be a boolean value (either true or false).
cfg['display-print-category'] = true
-- cfg['print-category']
-- Category to output if cfg['display-print-category'] is set to true, and a /Print subpage exists.
cfg['print-category'] = 'Templates with print versions'
----------------------------------------------------------------------------------------------------
-- HTML and CSS configuration
----------------------------------------------------------------------------------------------------
-- cfg['main-div-id']
-- The "id" attribute of the main HTML "div" tag.
cfg['main-div-id'] = 'template-documentation'
-- cfg['main-div-classes']
-- The CSS classes added to the main HTML "div" tag.
cfg['main-div-classes'] = 'template-documentation iezoomfix'
-- cfg['start-box-linkclasses']
-- The CSS classes used for the [view][edit][history] or [create] links in the start box.
cfg['start-box-linkclasses'] = 'mw-editsection-like plainlinks'
-- cfg['start-box-link-id']
-- The HTML "id" attribute for the links in the start box.
cfg['start-box-link-id'] = 'doc_editlinks'
----------------------------------------------------------------------------------------------------
-- {{fmbox}} template configuration
----------------------------------------------------------------------------------------------------
-- cfg['fmbox-id']
-- The id sent to the "id" parameter of the {{fmbox}} template.
cfg['fmbox-id'] = 'documentation-meta-data'
-- cfg['fmbox-style']
-- The value sent to the style parameter of {{fmbox}}.
cfg['fmbox-style'] = 'background-color: #ecfcf4'
-- cfg['fmbox-textstyle']
-- The value sent to the "textstyle parameter of {{fmbox}}.
cfg['fmbox-textstyle'] = 'font-style: italic'
----------------------------------------------------------------------------------------------------
-- Tracking category configuration
----------------------------------------------------------------------------------------------------
-- cfg['display-strange-usage-category']
-- Set to true to enable output of cfg['strange-usage-category'] if the module is used on a /doc subpage
-- or a /testcases subpage. This should be a boolean value (either true or false).
cfg['display-strange-usage-category'] = true
-- cfg['strange-usage-category']
-- Category to output if cfg['display-strange-usage-category'] is set to true and the module is used on a
-- /doc subpage or a /testcases subpage.
cfg['strange-usage-category'] = 'Wikipedia-sider med mærkelig ((dokumentation)) brug'
--[[
----------------------------------------------------------------------------------------------------
-- End configuration
--
-- Don't edit anything below this line.
----------------------------------------------------------------------------------------------------
--]]
return cfg