File:Connectors of a QSC PLX2402 professional PA Power Amplifier.jpg
![File:Connectors of a QSC PLX2402 professional PA Power Amplifier.jpg](http://178.128.105.246/cars-https-upload.wikimedia.org/wikipedia/commons/thumb/3/36/Connectors_of_a_QSC_PLX2402_professional_PA_Power_Amplifier.jpg/800px-Connectors_of_a_QSC_PLX2402_professional_PA_Power_Amplifier.jpg?20220107134847)
Original file (856 × 346 pixels, file size: 81 KB, MIME type: image/jpeg)
Captions
Captions
Summary
[edit]DescriptionConnectors of a QSC PLX2402 professional PA Power Amplifier.jpg |
Deutsch: Anschlüsse auf der Rückseite eines professionellen PA-Endverstärkers QSC PLX2402. Von links nach rechts: Zwei (symmetrische) XLR-Buchsen zum Anschluss der Eingangssignale für zwei Audio-Kanäle (Stereo), zwei 6,35-mm-Klinkenbuchsen für denselben Zweck (alternativer Eingang), zwei runde Buchsen vom Typ Neutrik Speakon für den Anschluss von zwei Lautsprechern, zwei Paar Schraubklemmen (jeweils eine rote und eine schwarze pro Audiokanal) für den Anschluss zweier Lautsprecher (alternativ zu den Neutrik Speakon Anschlüssen).
English: Connectors on the backside of a QSC PLX2402 professional PA Power Amplifier. From left to right: Two (symmetrical) XLR input connectors for two input channels (stereo), two audio jack connectors (mono, symmetrical) 6.35 millimetres (1⁄4 inch) for the same purpose, two round output connectors of the type Neutrik Speakon for connecting loudspeakers, two pairs of screw terminals (each pair is for one audio channel and has a black and a red screw terminal) for connecting loudspeakers. |
|||
Date | ||||
Source | Own work | |||
Author | Pittigrilli | |||
Other versions |
|
Licensing
[edit]![w:en:Creative Commons](http://178.128.105.246/cars-https-upload.wikimedia.org/wikipedia/commons/thumb/7/79/CC_some_rights_reserved.svg/90px-CC_some_rights_reserved.svg.png)
![attribution](http://178.128.105.246/cars-https-upload.wikimedia.org/wikipedia/commons/thumb/1/11/Cc-by_new_white.svg/24px-Cc-by_new_white.svg.png)
![share alike](http://178.128.105.246/cars-https-upload.wikimedia.org/wikipedia/commons/thumb/d/df/Cc-sa_white.svg/24px-Cc-sa_white.svg.png)
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
Annotations InfoField | This image is annotated: View the annotations at Commons |
Two (symmetrical) XLR input connectors for two input channels (stereo)
Zwei (symmetrische) XLR-Buchsen zum Anschluss der Eingangssignale für zwei Audio-Kanäle (Stereo)
Audio jack connector for signal input of channel 1 (CH 1)
6,35-mm-Klinkenbuchse für den Anschluss des Eingangssignals für Kanal 1 (CH 1)
Audio jack connector for signal input of channel 2 (CH 2)
6,35-mm-Klinkenbuchse für den Anschluss des Eingangssignals für Kanal 2 (CH 2)
DIP Switches ("MODE SWITCHES") for configuring operation parameters of the power amplifier which are seldomly changed, like bridge mode, clip limiter, etc.
DIP-Schalter ("MODE SWITCHES") für die Einstellung von Betriebsparametern des Endverstärkers, die nur selten verändert werden, wie Mono-Betrieb als Brückenverstärker, Clipping-Begrenzer, etc.
Loudspeaker terminals of the quasi-standardized type Neutrik Speakon
Lautsprecheranschlüsse nach dem Quasistandard Neutrik Speakon
Louspeaker terminals as screw terminals, red and black for one channel each - alternatively to the Neutrik Speakon connectors more left
Lautsprecheranschlüsse mit Schraubklemmen, jeweils rot und schwarz für einen Kanal - als Alternative zu den Neutrik-Speakon-Anschlüssen weiter links
cooling fan
Lüfter
Loudspeaker pictograms (symbols) indicating how to attach the wires for normal stereo mode or for mono operation (bridge mode)
Lautsprecher-Piktogramme zur Anzeige der korrekten Verkabelung für normalen Stereo-Betrieb oder für den Betrieb als Monoendstufe (Brückenverstärker)
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 13:48, 7 January 2022 | ![]() | 856 × 346 (81 KB) | Pittigrilli (talk | contribs) | Uploaded own work with UploadWizard |
You cannot overwrite this file.
File usage on Commons
The following 2 pages use this file:
File usage on other wikis
The following other wikis use this file:
- Usage on ca.wikipedia.org
- Usage on de.wikipedia.org
- Usage on en.wikipedia.org