Pennsylvania Railroad Q2 class

(Redirected from PRR Q2)

The Pennsylvania Railroad's class Q2 comprised one prototype and twenty-five production duplex steam locomotives of 4-4-6-4 wheel arrangement built between 1944 and 1945.[1][3][4][2]

Pennsylvania Railroad Q2 class
PRR Q2 prototype #6131
Type and origin
Power typeSteam
BuilderAltoona Works
Build date1944–45[1]
Total produced26[1]
Specifications
Configuration:
 • Whyte4-4-6-4[1]
 • UIC2'BC2'
Gauge4 ft 8+12 in (1,435 mm) standard gauge[1]
Leading dia.36 in (0.914 m)[1]
Driver dia.69 in (1.753 m)[1]
Wheelbase26 ft 4.5 in (8.039 m) (driving)
20 ft 4 in (6.20 m) (rigid)
53 ft 5.5 in (16.294 m)
Length124 ft 7.125 in (37.976 m) (locomotive and tender)[1]
Width11 ft 4 in (3.45 m) (storm windows open)[1]
Height16 ft 5.5 in (5.017 m)[1]
Adhesive weight393,000 lb (178,000 kg; 178 t)[1]
Loco weight619,100 lb (280,800 kg; 280.8 t)[1]
Tender weight430,000 lb (195,000 kg; 195 t)[1]
Total weight1,049,100 lb (475,900 kg; 475.9 t)[1]
Tender typePRR class 180F84, 8 axles, with conductor "doghouse"
Fuel typeSoft coal
Fuel capacity39.86 short tons (36.16 t; 35.59 long tons)[1]
Water cap.19,020 US gal (72,000 L; 15,840 imp gal)[1]
Fuel consumption12.5 t (12.3 long tons; 13.8 short tons) of coal per hour
16,600 US gal (63,000 L; 13,800 imp gal) of water per hour
Boiler106 in (2.692 m)
Boiler pressure300 psi (2.1 MPa)
Front cylinder19+34 in × 28 in (502 mm × 711 mm)
Rear cylinder23+34 in × 29 in (603 mm × 737 mm)
Valve gearWalschaerts
Performance figures
Power output6,645 hp (4,955 kW),[2] (drawbar)
Tractive effort100,816 lbf (without booster) / 115,816 lbf (with booster)
Factor of adh.3.9
Career
OperatorsPennsylvania Railroad[1]
Numbers6131, 6175–6199[1]
Last run1951
DispositionAll scrapped

They were the largest non-articulated locomotives ever built and the most powerful locomotives ever static tested, producing 7,987 cylinder horsepower (5,956 kW) on the PRR's static test plant[clarification needed]. They were by far the most successful duplex type. The duplex propensity to slip was combated by an automatic slip control mechanism that reduced power to the slipping unit.

The Q2 locomotive was 78% more powerful than the locomotives that PRR had in service at the time, and the company claimed the Q2 could pull 125 freight cars at a speed of 50 mph (80 km/h).[5] These were an improved version of the previous Q1 class, which was a 4-6-4-4 dual-purpose engine instead of a 4-4-6-4 freight engine.

Despite the overall success, the Q2s were all out of service by 1951. With dieselization, they were the obvious first targets to be withdrawn since they were only a little more capable than the conventional J1 class 2-10-4s, but with far-higher operating and maintenance costs. The final Q2, 6199's power output is 7,987 hp. All have been scrapped and none were preserved.

References

edit
  1. ^ a b c d e f g h i j k l m n o p q r Harley, E.T. (1982). Classic Power 5: Pennsy Q Class. Hicksville, New York: N.J. International. ISBN 0-934088-09-8.
  2. ^ a b William L. Withuhn (2019). American Steam Locomotives: Design and Development, 1880-1960. Bloomington, IA: Indiana University Press. ISBN 978-0-253-03933-0.
  3. ^ Staufer, Alvin (1962). Pennsy Power. Staufer. pp. 216–225. LOC 62-20872.
  4. ^ Brian Reed (June 1972). Loco Profile 24: Pennsylvania Duplexii. Windsor, Berkshire, UK: Profile Publications.
  5. ^ "4-Cylinder Engine Has 78% More Power." Popular Mechanics, December 1944, p. 13.