Jump to content

Boat hook

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by Citation bot (talk | contribs) at 06:19, 12 March 2023 (Add: title. Changed bare reference to CS1/2. | Use this bot. Report bugs. | Suggested by Mako001 | #UCB_webform 294/2323). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Yu'pik boathooks and paddles

A boat hook is part of boating equipment. Its most common use is as a docking and undocking aid. It may be similar to a pike pole, however it commonly has a blunt tip, for pushing during undocking, with a hook for docking. In addition, it may have a line attached to the other end, which may have a ring for this purpose.[1]

It may be also used for pulling things out of water, such as debris or people, as well as for other fetching tasks and holding-off from other boats or landings.

History

[edit]

Evidence of boat hooks has been found from ancient Rome and the painting Christ in the Storm on the Sea of Galilee, by Rembrandt van Rijn was painted in 1633 and clearly shows one in its familiar form.

Traditional

[edit]
Traditional Boat Hook

A traditional European boat hook pole is around 1.8- 2.4M and is typically made of ash- one of the best woods for poles, such as spears etc. It would have a brass hook- a non-rusting metal common on traditional boat fittings. The hook end would usually have a hook on one side for pulling and catching things, plus a rounded point for pushing things.[2]

Modern Styles

[edit]

Although the traditional boat hook is still available, various different materials, such as aluminium and even a rolled up polymer are now available.[3] Although the boat hook is a general purpose reaching and holding-off tool on boats, there are more specialised forms, such as the Recovery Pole [4] designed for length rather than the rigid strength of a boat hook.

Boat hook drill

[edit]

In the Royal Navy, during ceremonial occasions the Ceremonial Boat Hook Drill must be performed during berthing and unberthing.[5]

References

[edit]
  1. ^ Jupp, Edmund W. (2003). Boat Watching – Edmund W. Jupp – Google Books. ISBN 9781841508092. Retrieved 2013-03-06.
  2. ^ "2.5m Wooden (ASH) Boat Hook with Brass Boat Hook End".
  3. ^ "Revolve Rollable Boat HookDefault Title".
  4. ^ "MOB Cradle Recovery Pole - 1.7m - 4.7m - Telescopic Body Hook and Boat Hook Extension Pole for use with MOB Cradles - Body Recovery".
  5. ^ "Admiralty Manual of Seamanship", The Stationery Office, 1995 "Ceremonial Boat Hook Drill"