Jump to content

List of ISO standards

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Taiwan.louis.lu (talk | contribs) at 16:54, 17 August 2008 (→‎ISO 20000–ISO 29999: updated the new released ISO/IEC 24762 standard). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

This is a list of ISO standards that are discussed in Wikipedia articles. For a list of all the more than 16,000 ISO standards (as of 2007), see the ISO Catalogue.

About 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely/publicly available.[1]

ISO 1–ISO 999

  • ISO 1 Standard reference temperature for geometrical product specification and verification
  • ISO 3 Preferred numbers
  • ISO 4 Rules for the abbreviation of title words and titles of publications
  • ISO 7 Pipe threads where pressure-tight joints are made on the threads
  • ISO 9 Information and documentation — Transliteration of Cyrillic characters into Roman characters — Slavic and non-Slavic languages
  • ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch)
  • ISO 31 Quantities and units
  • ISO 68-1 Basic profile of metric screw threads
  • ISO 216 paper sizes, e.g. the A4 paper size
  • ISO 226 Phon based on Fletcher-Munson curves
  • ISO 228-1: Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation.
  • ISO 233:1984 Transliteration of Arabic characters into Roman characters
    • ISO 233-2:1993 Transliteration of Arabic characters into Roman characters — Part 2: Arabic language — Simplified transliteration
  • ISO 259:1984 Documentation — Transliteration of Hebrew characters into Roman characters
    • ISO 259-2:1994 Transliteration of Hebrew characters into Roman characters — Part 2: Simplified transliteration
  • ISO 262 Selected metric-screw-thread sizes for screws, bolts, and nuts
  • ISO 500 Agricultural tractors — Rear-mounted power take-off
  • ISO 639 Codes for the representation of names of languages
    • ISO 639-1 Codes for the representation of names of languages — Part 1: Alpha-2 code
    • ISO 639-2 Codes for the representation of names of languages — Part 2: Alpha-3 code
    • ISO 639-3 Codes for the representation of names of languages — Part 3: Alpha-3 code for comprehensive coverage of languages
  • ISO/IEC 646 internationalized 7 bit ASCII variants
  • ISO 657 Hot-rolled steel sections
  • ISO 668 Specification for Shipping Containers
  • ISO 690 bibliographic references
  • ISO 732 Photography — 120-size and 220-size films — Dimensions
  • ISO 838 Standard for punching filing holes into paper
  • ISO 843:1997 Conversion of Greek characters into Roman characters
  • ISO 999 Guidelines for the content, organization, and presentation of indexes

ISO 1000–ISO 9999

ISO 10000–ISO 19999

  • ISO 10006 Quality management — Guidelines to quality in project management
  • ISO 10007 Quality management — Guidelines for configuration management
  • ISO 10012 Measurement management systems — Requirements for measurement processes and measuring equipment
  • ISO/IEC 10021 Message Oriented Text Interchange Systems (MOTIS)
  • ISO/IEC 10026 Open Systems Interconnection
  • ISO 10077 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance
  • ISO/IEC 10089 Information technology; 130 mm rewritable optical disk cartridge for information interchange — 650 MB per cartridge
  • ISO 10160 Interlibrary Loan Application Service Definition — defines terminology used in interlibrary loan
  • ISO 10161 Interlibrary Loan Application Protocol
  • ISO/IEC 10179:1996 Document Style Semantics and Specification Language (DSSSL)
  • ISO 10202:1991 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
  • ISO 10206 Extended Pascal (programming language)
  • ISO 10211 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
  • ISO 10279 BASIC programming language
  • ISO 10303 Industrial automation systems and integration — Product data representation and exchange. Known as STEP, STandard for the Exchange of Product data
  • ISO 10383 Securities and related financial instruments — Codes for exchanges and market identification (MIC)
  • ISO 10487 Connections for passenger car stereos
  • ISO 10628 Flow diagrams for process plants
  • ISO 10646 Universal Character Set (equivalent to Unicode's character set)
  • ISO 10664 Hexalobular internal driving feature for bolts and screws — Torx screw head
  • ISO 10957 Information and documentation — International Standard Music Number (ISMN)
  • ISO 10962 Securities and related financial instruments — Classification of Financial Instruments (CFI code)
  • ISO 11064 Ergonomic Design of Control Centres
    • ISO 11062-1:2000 Part 1: Principles for the design of control centres
    • ISO 11062-2:2000 Part 2: Principles for the arrangement of control suites
    • ISO 11062-3:1999 Part 3: Control room layout ISO 11064-3:1999/Cor 1:2002
    • ISO 11062-3:2004 Part 4: Layout and dimensions of workstations
    • ISO 11062-3:2005 Part 6: Environmental requirements for control centres
  • ISO/IEC 11172 MPEG-1
  • ISO 11170:2003 Hydraulic fluid power — Filter elements — Sequence of tests for verifying performance characteristics
  • ISO/IEC 11179 Information Technology — Metadata Registries (MDR)
    • ISO/IEC 11179-1:2004 Part 1: Framework
    • ISO/IEC 11179-2:2005 Part 2: Classification
    • ISO/IEC 11179-3:2003 Part 3: Registry metamodel and basic attributes
    • ISO/IEC 11179-4:2004 Part 4: Formulation of data definitions
    • ISO/IEC 11179-5:2005 Part 5: Naming and identification principles
    • ISO/IEC 11179-6:2005 Part 6: Registration
  • ISO 11180 Postal addressing
  • ISO/IEC 11404:1996 Language-independent datatypes (See also General purpose datatypes)
  • ISO 11521 Replaced by ISO 15022
  • ISO/IEC 11578:1996 Information technology — Open Systems Interconnection — Remote procedure call (RPC)
  • ISO 11783 aka. IsoBus — J1939-based communication protocol for the agriculture industry.
  • ISO/IEC 11801 Information technology — Generic cabling for customer premises
  • ISO 11898 Road vehicles — Controller area network (CAN)
  • ISO 12006 Building construction. Organization of information about construction works.
  • ISO 13239 High-level data link control (HDLC) procedures
  • ISO/IEC 13249 SQL multimedia and application packages
  • ISO/IEC 13250 Topic map
  • ISO 13346 Volume and file structure of write-once and rewritable media, which UDF is based on.
  • ISO 13370 Thermal performance of buildings — Heat transfer via the ground — Calculation methods
  • ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
    • ISO 13406-1:1999 Part 1: Introduction
    • ISO 13406-2:1002 Part 2: Ergonomic requirements for flat panel displays
  • ISO 13407:1999 Human-centred design processes for interactive systems
  • ISO 13450 110 film format
  • ISO 13485:2003 Comprehensive management system for the design and manufacture of medical devices.
  • ISO 13490 Information technology: Volume and file structure of read-only and write-once compact disk media for information interchange
  • ISO 13567/1 to 3 Technical product documentation; Organization and naming of layers for Computer-aided design (CAD)
  • ISO/IEC 13568:2002 Information Technology — Z Formal Specification Notation — Syntax, Type System and Semantics
  • ISO 13616 Bank Account Numbers (IBAN)
  • ISO 13849-1 Safety of machinery, Safety related parts of control systems, General principles for design
  • ISO/IEC 13818 MPEG-2
  • ISO 14000 Environmental Management Standards in production environments
  • ISO 14001 Environmental Management
  • ISO 14064 Greenhouse Gases
  • ISO 14230 Road vehicles — Diagnostic systems — Keyword Protocol 2000
    • ISO 14230-1 Physical layer
    • ISO 14230-2 Data link layer
    • ISO 14230-3 Application layer
    • ISO 14230-4 Requirements for emission-related systems
  • ISO/IEC 14443 Identification cards — Contactless integrated circuit(s) cards — Proximity cards
  • ISO/IEC 14496 MPEG-4
  • ISO 14644 Standards Cleanrooms and associated controlled environments
  • ISO 14651 Information technology: International string ordering and comparison
  • ISO 14698 Standards
    • ISO-14698-1 Bio-contamination Control — General Principles
    • ISO-14698-2 Evaluation & Interpretation of Bio-contamination Data
  • ISO 14750 Information technology — Open Distributed Processing — Interface Definition Language
  • ISO/IEC 14755 Input methods to enter unicode characters from ISO/IEC 10646
  • ISO/IEC 14882 Programming Languages — C++
  • ISO 14915 Software ergonomics for multimedia user interfaces
    • ISO 14915-1:2002 Part 1: Design principles and framework
    • ISO 14915-2:2003 Part 2: Multimedia navigation and control
    • ISO 14915-3:2002 Part 3: Media selection and combination
  • ISO 14971 Medical Devices — Application Of Risk Management To Medical Devices
  • ISO/IEC 14977 Extended Backus-Naur Form (EBNF)
  • ISO 15000 Electronic business eXtensible Markup Language ebXML
    • ISO 15000-1:2004 Part 1: Collaboration-protocol profile and agreement specification (ebCPP)
    • ISO 15000-2:2004 Part 2: Message service specification (ebMS)
    • ISO 15000-3:2004 Part 3: Registry information model specification (ebRIM)
    • ISO 15000-4:2004 Part 4: Registry services specification (ebRS)
    • ISO 15000-5:2005 Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)
  • ISO 15022 Securities: Scheme for messages(Data Field Dictionary)
  • ISO 15099 Thermal performance of windows, doors and shading devices — Detailed calculations
  • ISO 15189 Medical laboratories — Particular requirements for quality and competence
  • ISO 15288 Systems engineering — System life cycle processes
  • ISO 15289 Systems and software engineering — Content of systems and software life cycle process information products (Documentation)
  • ISO/IEC 15291: Information technology — Programming languages — Ada Semantic Interface Specification (ASIS)
  • ISO/IEC 15408 Common Criteria — Evaluation Criteria for Information Technology Security
  • ISO/IEC 15434 2D Data Matrix barcode
  • ISO/IEC 15444 JPEG 2000
  • ISO/IEC 15445:2000 ISO HTML, a subset of Hypertext Markup Language (HTML) 4
  • ISO/IEC 15504 Framework for the assessment of software processes, also known as SPICE (Software Process Improvement and Capability Determination).
  • ISO 15614-13:2002 Specification and qualification of welding procedures for metallic materials-Welding procedure test
  • ISO 15686 Service life planning for constructive works in 10 parts
  • ISO 15693 Transponders
  • ISO 15706 International Standard Audiovisual Number
  • ISO 15707 International Standard Musical Work Code
  • ISO 15836 The Dublin Core metadata element set
  • ISO 15897 Standard for the registration of new POSIX locales and POSIX charmaps
  • ISO 15924 Codes for the representation of names of scripts
  • ISO 15930 Portable Document Format PDF
  • ISO/IEC 15948:2003. Portable Network Graphics PNG
  • ISO/IEC 16500 Generic Digital Audio-Visual Systems DAVIC
  • ISO 16071:2003 Ergonomics of human-system interaction, Guidance on accessibility for human-computer interfaces
  • ISO/IEC 16262. ECMAScript
  • ISO 16750 Road vehicles — Environmental conditions and testing for electrical and electronics equipment.
  • ISO/TS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
  • ISO 16982:2002 Ergonomics of human-system interaction, Usability methods supporting human-centred design
  • ISO/IEC 17024:2003 specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel
  • ISO/IEC 17025 General requirements for competence of test and calibration laboratories
  • ISO 17776 : Petroleum industries
  • ISO/IEC 17799 Information technology: Code of practice for information security management
  • ISO/IEC 17894 Ships and marine technology — Computer applications — General principles for development and use of PES in marine applications
  • ISO 18000-7 Wireless standard for active RFID (Radio Frequency Identification)
  • ISO/IEC 18004: QR Code Standardization
  • ISO/IEC 18009: Information technology — Programming languages — Ada: Conformity assessment of a language processor (ACATS)
  • ISO 18152:2003 Ergonomics of human-system interaction, Specification for the process assessment of human-system issues
  • ISO 18185: Wireless standard for electronic seals using active RFID (Radio Frequency Identification)
  • ISO 18245 standard concerning the assignment of Merchant Category Codes (MCC) in retail financial services
  • ISO 18529:2000 Ergonomics of human-system interaction, Human-centred lifecycle process descriptions (available in English only)
  • ISO 18629 standardized Process Specification Language (PSL).
  • ISO 19005 PDF
  • ISO 19011 standard providing guidelines for quality and environmental management systems auditing
  • ISO 19092-1 Financial Services — Security — Part 1: Security framework
  • ISO 19092-2 Financial Services — Security — Part 2: Message syntax and cryptographic requirements
  • ISO 19101 Geographic Information: Reference model
  • ISO 19105 Geographic Information: Conformance and testing
  • ISO 19107 Geographic Information: Spatial schema
  • ISO 19108 Geographic Information: Temporal schema
  • ISO 19109 Geographic Information: Rules for Application Schema
  • ISO 19110 Geographic Information: Feature cataloguing methodology
  • ISO 19111 Geographic Information: Spatial referencing by coordinates
  • ISO 19111 Geographic Information: Spatial referencing by identifier
  • ISO 19113 Geographic Information: Quality principles
  • ISO 19114 Geographic Information: Quality evaluation procedures
  • ISO 19115 Geographic Information: Metadata
  • ISO 19123 Geographic Information: Coverage schema
  • ISO 19128 Geographic Information: Web Map Service
  • ISO 19131 Geographic Information: Data product specification
  • ISO 19136 Geographic Information: Geography Markup Language
  • ISO/IEC 19501 Unified Modeling Language (UML)
  • ISO/IEC 19502 Meta-Object Facility (MOF)
  • ISO/IEC 19503 XML Metadata Interchange (XMI)
  • ISO/IEC 19757 Document Schema Definition Languages (DSDL)
    • ISO/IEC FDIC 19757-2 Regular-grammar-based validation RELAX NG
    • ISO/IEC 19757-3 Rule-based validation — Schematron
  • ISO/IEC 19770 Information technology — Software asset management
  • ISO/IEC 19790 Security requirements for cryptographic modules (see also FIPS 140)
  • ISO/IEC 19794 Information technology - Biometric data interchange formats

ISO 20000–ISO 29999

  • ISO/IEC 20000:2005 IT Service Management System (based on BS15000)
  • ISO 20022 Financial Services — universal financial industry message scheme
  • ISO/IEC TR 20943 Information technology — Procedures for achieving metadata registry content consistency
    • ISO/IEC TR 20943-1:2003 Part 1: Data elements
    • ISO/IEC TR 20943-3:2004 Part 3: Value domains
  • ISO 22000 Food safety management systems — Requirements for any organization in the food chain
  • ISO/TS 22003 Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems
  • ISO/IEC TR 22250 Regular Language description for XML — (RELAX)
    • ISO/IEC TR 22250-1:2002 RELAX Core
  • ISO/PAS 22399:2007 Social security - Guideline for incident preparedness and operational continuity management --Taiwan.louis.lu (talk) 16:49, 17 August 2008 (UTC)
  • ISO/IEC 23270:2003 C# Programming Language
  • ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1 (in publication as of 2005-12)
    • ISO/IEC 23360-1 — Part 1: Generic specification
    • ISO/IEC 23360-2 — Part 2: Specification for IA32 architecture
    • ISO/IEC 23360-3 — Part 3: Specification for IA64 architecture
    • ISO/IEC 23360-4 — Part 4: Specification for AMD64 architecture
    • ISO/IEC 23360-5 — Part 5: Specification for PPC32 architecture
    • ISO/IEC 23360-6 — Part 6: Specification for PPC64 architecture
    • ISO/IEC 23360-7 — Part 7: Specification for S390 architecture
    • ISO/IEC 23360-8 — Part 8: Specification for S390X architecture
  • ISO 23950 Library standard ANSI/NISO Z39.50 — Protocol for searching and retrieving information, usually from bibliographic records
  • ISO/IEC 24727 Identification Cards — Integrated Circuit Card Programming Interfaces
    • ISO/IEC 24727-1 — Part 1: Architecture
    • ISO/IEC FCD 24727-2 — Part 2: Generic card interface
    • ISO/IEC FCD 24727-3 — Part 3: Application interface
    • ISO/IEC CD 24727-4 — Part 4: API Administration
    • ISO/IEC WD 24727-5 — Part 5: Testing
    • ISO/IEC WD 24727-6 — Part 6: Registration authority procedures for the authentication protocols for interoperability
  • ISO/IEC 24762:2008 Information technology — Security techniques — Guidelines for information

and communications technology disaster recovery services --Taiwan.louis.lu (talk) 16:54, 17 August 2008 (UTC)

  • ISO/IEC DIS 25961 Recommended Practice for Architectural Description of Software-Intensive Systems. See IEEE 1471
  • ISO26000 Guideline about Social Responsibility also called ISO SR
  • ISO/IEC 26300 OpenDocument Format (.odf)
  • ISO/IEC 27001 Information technology — Security techniques — Information security management systems — Requirements

ISO 30000–ISO 39999

See also

References

  1. ^ Freely Available Standards
Retrieved from "https://en.wikipedia.org/w/index.php?title=List_of_ISO_standards&oldid=232516345"