Jump to content

Lead(II) thiocyanate

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Addbot (talk | contribs) at 04:26, 1 March 2013 (Bot: Migrating 4 interwiki links, now provided by Wikidata on d:q2572355). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Lead(II) thiocyanate
Names
IUPAC name
Lead(II) thiocyanate
Systematic IUPAC name
Lead(II) thiocyanate
Other names
Lead dithiocyanate, lead isothiocyanate, lead sulfocyanate, lead thiocyanate, lead thiocyanate (Pb(SCN) 2), lead(II) thiocyanate, lead(II) thiocyanate (Pb(NCS) 2), thiocyanic acid, lead(2+) salt
Identifiers
ECHA InfoCard 100.008.887 Edit this at Wikidata
Properties
Pb(SCN)2
Molar mass 323,3648 g/mol
Appearance white or light yellow powder
Odor odorless
Density 3.82 g/cm3
Melting point 190 °C (374 °F; 463 K)
0.553 g/100 mL
Solubility soluble in nitric acid
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
1
1
1
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Lead(II) thiocyanate is a chemical compound, more precisely a salt, with the chemical formula Pb(SCN)2.

Lead(II) thiocyanate may be made by reacting lead(II) acetate (Pb(CH3COO)2) solved in water with either potassium thiocyanate (KSCN) or ammonium thiocyanate (NH4SCN), thus causing precipitation of solid lead(II) thiocyanate.

Ion reaction:

Pb2+(aq) + 2SCN-(aq) → Pb(SCN)2(s)

Lead(II) thiocyanate is reasonably soluble at room temperature, thus it may be difficult to identify in a solution with low concentration of lead(II) thiocyanate. Although it has not been confirmed by other sources than the author of this article, experiments show that even if there is no precipitation of lead(II) thiocyanate in the solution, crystals of the salt may form.