Jump to content

Mount Bransfield

Coordinates: 63°17′S 57°5′W / 63.283°S 57.083°W / -63.283; -57.083 (Mount Bransfield)
From Wikipedia, the free encyclopedia
(Redirected from Vishegrad Knoll)
Mount Bransfield
Mount Bransfield is located in Antarctica
Mount Bransfield
Mount Bransfield
Location in Antarctica
Highest point
Coordinates63°17′S 57°5′W / 63.283°S 57.083°W / -63.283; -57.083 (Mount Bransfield)
Geography
LocationTrinity Peninsula, Graham Land
ContinentAntarctica

Mount Bransfield (63°17′S 57°5′W / 63.283°S 57.083°W / -63.283; -57.083 (Mount Bransfield)) is a prominent conical-topped, ice-covered mountain, 760 metres (2,490 ft) high, rising 2 nautical miles (3.7 km; 2.3 mi) southwest of Cape Dubouzet at the northeast tip of the Antarctic Peninsula.[1]

Location

[edit]
Trinity Peninsula, Antarctic Peninsula. Mount Bransfield near northeast tip

Mount Bransfield is southeast of Prime Head, the northern tip of Trinity Peninsula, which itself is the tip of the Antarctic Peninsula. It is east of the Mott Snowfield, west of the Antarctic Sound and north of Hope Bay. It faces Bransfield Island to the east. Nearby features include Cape Dubouzet to the north, Koerner Rock and Bahía Chica to the south.[2][3]

Discovery and name

[edit]

Mount Bransfield was discovered by a French expedition, 1837–40, under Captain Jules Dumont d'Urville, who named it for Edward Bransfield, Master, Royal Navy, who circumnavigated and charted the South Shetland Islands in 1820.[1]

Nearby features

[edit]

Nearby features, from nortth to south, include:

Cape Dubouzet

[edit]

63°16′S 57°03′W / 63.267°S 57.050°W / -63.267; -57.050. A cape which marks the northeast extremity of Antarctic Peninsula. Charted in 1838 by a French expedition under Captain Jules Dumont d'Urville, who named it for Lieutenant Joseph Dubouzet of the expedition ship Zélée.[4]

Obzor Hill

[edit]

63°16′00″S 57°05′43″W / 63.26667°S 57.09528°W / -63.26667; -57.09528. A hill that rises to 479 metres (1,572 ft)[5] high at the northeast tip of Trinity Peninsula. It is situated 2.46 kilometres (1.53 mi) west-southwest of Cape Dubouzet, 1.18 kilometres (0.73 mi) north of Mount Bransfield and 1.87 kilometres (1.16 mi) northwest of Vishegrad Knoll. German-British mapping in 1996. Named after the settlement of Obzor in Eastern Bulgaria.[6]

Vishegrad Knoll

[edit]

63°16′33″S 57°03′51″W / 63.27583°S 57.06417°W / -63.27583; -57.06417. A hill that rises to 532 metres (1,745 ft)[7] high at the northeast tip of Trinity Peninsula. Situated 2.21 kilometres (1.37 mi) south-southwest of Cape Dubouzet, 1.87 kilometres (1.16 mi) southeast of Obzor Hill and 1.83 kilometres (1.14 mi) east of Mount Bransfield. German-British mapping in 1996. Named after the settlement of Vishegrad in Southern Bulgaria.[8]

Koerner Rock

[edit]

63°19′S 57°05′W / 63.317°S 57.083°W / -63.317; -57.083. A small but conspicuous rock outcrop 4 nautical miles (7.4 km; 4.6 mi) southwest of Cape Dubouzet. Named by the UK Antarctic Place-Names Committee (UK-APC) for Roy M. Koerner, Falkland Islands Dependencies Survey (FIDS) assistant meteorologist and glaciologist at Hope Bay, 1957-60.[9]

Bahía Chica

[edit]

63°21′S 57°03′W / 63.350°S 57.050°W / -63.350; -57.050. Bahía Chica (Small Bay) is a bay on the coast of the Antarctic Peninsula. The name originates from Argentina.[10]

References

[edit]

Sources

[edit]
  • Alberts, Fred G., ed. (1995), Geographic Names of the Antarctic (PDF) (2 ed.), United States Board on Geographic Names, retrieved 2023-12-03 Public Domain This article incorporates public domain material from websites or documents of the United States Board on Geographic Names.
REMA Explorer
The Reference Elevation Model of Antarctica (REMA) gives ice surface measurements of most of the continent. When a feature is ice-covered, the ice surface will differ from the underlying rock surface and will change over time. To see ice surface contours and elevation of a feature as of the last REMA update,
  • Open the Antarctic REMA Explorer
  • Enter the feature's coordinates in the box at the top left that says "Find address or place", then press enter
    The coordinates should be in DMS format, e.g. 65°05'03"S 64°01'02"W. If you only have degrees and minutes, you may not be able to locate the feature.
  • Hover over the icons at the left of the screen
  • Find "Hillshade" and click on that
    In the bottom right of the screen, set "Shading Factor" to 0 to get a clearer image
  • Find "Contour" and click on that
    In the "Contour properties" box, select Contour Interval = 1m
    You can zoom in and out to see the ice surface contours of the feature and nearby features
  • Find "Identify" and click on that
    Click the point where the contour lines seem to indicate the top of the feature
    The "Identify" box will appear to the top left. The Orthometric height is the elevation of the ice surface of the feature at this point.

Public Domain This article incorporates public domain material from websites or documents of the United States Geological Survey.