KeeLoq
This article needs additional citations for verification. (August 2007) |
KeeLoq is a proprietary hardware-dedicated block cipher that uses a non-linear feedback shift register (NLFSR). The uni-directional command transfer protocol was designed by Frederick Bruwer of Nanoteq (Pty) Ltd., the cryptographic algorithm was created by Gideon Kuhn at the University of Pretoria, and the silicon implementation was by Willem Smit at Nanoteq (Pty) Ltd (South Africa) in the mid-1980s. KeeLoq was sold to Microchip Technology Inc in 1995 for $10 million.[1] It is used in 'hopping code' encoders and decoders such as NTQ105/106/115/125D/129D, HCS101/2XX/3XX/4XX/5XX and MCS31X2. KeeLoq has been used in many remote keyless entry systems by such companies like Chrysler,[2] Daewoo, Fiat, Ford,[3] GM, Honda, Mercedes-Benz,[3] Toyota, Volvo, Volkswagen Group, Clifford, Shurlok, and Jaguar.[3]
Description
[edit]![](http://178.128.105.246/cars-http-upload.wikimedia.org/wikipedia/commons/thumb/6/6c/%D0%9A%D0%BE%D0%B4%D0%B8%D1%80%D0%BE%D0%B2%D0%BA%D0%B0.png/220px-%D0%9A%D0%BE%D0%B4%D0%B8%D1%80%D0%BE%D0%B2%D0%BA%D0%B0.png)
KeeLoq "code hopping" encoders encrypt a 0-filled 32-bit block with KeeLoq cipher to produce a 32-bit "hopping code". A 32-bit initialization vector is linearly added (XORed) to the 32 least significant bits of the key prior to encryption and after decryption.
KeeLoq cipher accepts 64-bit keys and encrypts 32-bit blocks by executing its single-bit NLFSR for 528 rounds. The NLFSR feedback function is 0x3A5C742E
or
KeeLoq uses bits 1, 9, 20, 26 and 31 of the NLFSR state as its inputs during encryption and bits 0, 8, 19, 25 and 30 during decryption. Its output is linearly combined (XORed) with two of the bits of the NLFSR state (bits 0 and 16 on encryption and bits 31 and 15 on decryption) and with a key bit (bit 0 of the key state on encryption and bit 15 of the key state on decryption) and is fed back into the NLFSR state on every round.
Versions
[edit]This article describes the Classic KeeLoq protocol, but newer versions has been developed. The Ultimate KeeLoq system [4] is a timer-based algorithm enhancing the Classic KeeLoq system. The goal of this newer version is to contain stronger, industry standard AES-128 cipher which replaces KeeLoq cipher algorithm, and have a timer-driven counter which continuously increments, which is the opposite of the Classic KeeLoq where the counter increments based on the button press. This provides protection against brute-force attack and capture and replay attack, known as RollJam for Samy Kamkar's work.
Attacks
[edit]Replay attack
[edit]For simplicity, individual "code hopping" implementations typically do not use cryptographic nonces or timestamping. This makes the protocol inherently vulnerable to replay attacks: For example, by jamming the channel while intercepting the code, a thief can obtain a code that may still be usable at a later stage.[5] This sort of "code grabber,"[6] while theoretically interesting, does not appear to be widely used by car thieves.[7]
A detailed description of an inexpensive prototype device designed and built by Samy Kamkar to exploit this technique appeared in 2015. The device about the size of a wallet could be concealed on or near a locked vehicle to capture a single keyless entry code to be used at a later time to unlock the vehicle. The device transmits a jamming signal to block the vehicle's reception of rolling code signals from the owner's fob, while recording these signals from both of his two attempts needed to unlock the vehicle. The recorded first code is forwarded to the vehicle only when the owner makes the second attempt, while the recorded second code is retained for future use.[8] A demonstration was announced for DEF CON 23.[9]
Cryptanalysis
[edit]![](http://178.128.105.246/cars-http-upload.wikimedia.org/wikipedia/commons/thumb/c/c8/%D0%94%D0%B5%D0%BA%D0%BE%D0%B4%D0%B8%D1%80%D0%BE%D0%B2%D0%BA%D0%B0.png/220px-%D0%94%D0%B5%D0%BA%D0%BE%D0%B4%D0%B8%D1%80%D0%BE%D0%B2%D0%BA%D0%B0.png)
KeeLoq was first cryptanalyzed by Andrey Bogdanov using sliding techniques and efficient linear approximations. Nicolas Courtois attacked KeeLoq using sliding and algebraic methods. The attacks by Bogdanov and Courtois do not pose any threat to the actual implementations that seem to be much more vulnerable to simple brute-force of the key space that is reduced in all the code-hopping implementations of the cipher known to date. Some KeeLoq "code grabbers" use FPGA-based devices to break KeeLoq-based keys by brute force within about two weeks due to the reduced key length in the real world implementations.[citation needed]
In 2007, researchers in the COSIC group at the university at Leuven, Belgium, (K.U.Leuven) in cooperation with colleagues from Israel found a new attack against the system.[10] Using the details of the algorithm that were leaked in 2006, the researchers started to analyze the weaknesses. After determining the part of the key common to cars of a specific model, the unique bits of the key can be cracked with only sniffed communication between the key and the car.
Microchip introduced in 1996[11] a version of KeeLoq ICs which use a 60-bit seed. If a 60-bit seed is being used, an attacker would require approximately 1011 days of processing on a dedicated parallel brute force attacking machine before the system is broken.[12]
Side-channel attacks
[edit]In March 2008, researchers from the Chair for Embedded Security of Ruhr University Bochum, Germany, presented a complete break of remote keyless entry systems based on the KeeLoq RFID technology.[13][14] Their attack works on all known car and building access control systems that rely on the KeeLoq cipher.
The attack by the Bochum team allows recovering the secret cryptographic keys embedded in both the receiver and the remote control. It is based on measuring the electric power consumption of a device during an encryption. Applying what is called side-channel analysis methods to the power traces, the researchers can extract the manufacturer key from the receivers, which can be regarded as a master key for generating valid keys for the remote controls of one particular manufacturer. Unlike the cryptanalytic attack described above which requires about 65536 chosen plaintext-ciphertext pairs and days of calculation on a PC to recover the key, the side-channel attack can also be applied to the so-called KeeLoq Code Hopping mode of operation (a.k.a. rolling code) that is widely used for keyless entry systems (cars, garages, buildings, etc.).
The most devastating practical consequence of the side-channel analysis is an attack in which an attacker, having previously learned the system's master key, can clone any legitimate encoder by intercepting only two messages from this encoder from a distance of up to 100 metres (330 ft). Another attack allows one to reset the internal counter of the receiver (garage door, car door, etc.), which makes it impossible for a legitimate user to open the door.[15]
References
[edit]- ^ US patent 5517187, Bruwer, Frederick J.; Smit, Willem & Kuhn, Gideon J., "Microchips and remote control devices comprising same", issued 1996-05-14, assigned to Microchip Technology Inc.
- ^ Some evidence that Chrysler indeed uses KeeLoq can be found in (this video).
- ^ a b c Researchers Crack KeeLoq Code for Car Keys. WIRED. Retrieved 2024-05-21.
- ^ MicroChip - MCS3142 - Security - KeeLoq Encoder Devices
- ^ Analysis of RF Remote Security Using Software Defined Radio
- ^ http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2075¶m=en001022#P108_5361 stating, "It is a simple matter to build a circuit to record such transmissions for reply at the later time. Such a system is known as a code or key grabber."
- ^ "FACT CHECK: Are Car Thieves Using 'Code Grabbers' to Steal Automobiles?". 2 July 2008.
- ^ Thompson, Cadie (2015-08-06). "A hacker made a $30 gadget that can unlock many cars that have keyless entry". Tech Insider. Retrieved 2015-08-11.
- ^ Kamkar, Samy (2015-08-07). "Drive It Like You Hacked It: New Attacks and Tools to Wirelessly Steal Cars". DEF CON 23. Retrieved 2015-08-11.
- ^ How To Steal Cars — A Practical Attack on KeeLoq
- ^ (Will be in Web archive backup later): a Microchip press release on Dec 11, 1996 Quote: "...HCS410 KEELOQ Code Hopping Transponder and Encoder..."
- ^ Martin Novotny; Timo Kasper. "Cryptanalysis of KeeLoq with COPACOBANA" (PDF). SHARCS 2009 Conference: 159–164.
{{cite journal}}
: Cite journal requires|journal=
(help) - ^ "A complete break of the KeeLoq access control system". Archived from the original on 2015-09-24. Retrieved 2015-08-10.
- ^ Thomas Eisenbarth; Timo Kasper; Amir Moradi; Christof Paar; Mahmoud Salmasizadeh; Mohammad T. Manzuri Shalmani (2008-02-29). "Physical Cryptanalysis of KeeLoq Code Hopping Applications" (PDF). Ruhr University of Bochum, Germany. Retrieved 2009-03-22.
{{cite journal}}
: Cite journal requires|journal=
(help) - ^ Kasper, Timo (November 2012). Security Analysis of Pervasive Wireless Devices—Physical and Protocol Attacks in Practice (Ph.D.). Ruhr University Bochum, Germany. Retrieved 2023-07-03.
External links
[edit]- Microchip KeeLoq site
- Introduction to Ultimate KeeLoq Technology
- HCSXXX Encoder Family - Product Information
- Ultimate KeeLoq Technology, the Next Generation of Security - Featuring MCS3142 Dual KeeLoq Encoder
- "KeeLoq decryption algorithm specification" (PDF). Archived (PDF) from the original on 2007-04-23.
- C KeeLoq implementation on GitHub
- C source code by Ruptor
- Bogdanov, Andrey (August 31 – September 5, 2007). Cryptanalysis of the KeeLoq block cipher. Information Security and Cryptology: Third SKLOIS Conference, Inscrypt 2007, Revised Selected Papers. Xining, China. [1].
- N.T. Courtois and G.V. Bard, 'Algebraic and Slide Attacks on KeeLoq'
- "University of Bochum / HGI press release on the complete break of KeeLoq based entry systems" (PDF).[permanent dead link]
- Physical Cryptanalysis of KeeLoq code-hopping applications