-
Italian Spring Accelerometer measurements of unexpected Non Gravitational Perturbation during BepiColombo second Venus swing-by
Authors:
Carmelo Magnafico,
Umberto De Filippis,
Francesco Santoli,
Carlo Lefevre,
Marco Lucente,
David Lucchesi,
Emiliano Fiorenza,
Roberto Peron,
Valerio Iafolla
Abstract:
The Italian Spring Accelerometer (ISA) is a three axis mass-spring accelerometer, one of the payloads of the BepiColombo joint space mission between the European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA). At launch in October 2018, BepiColombo started its seven-year cruise as a stack of three different modules, overall named Mercury Composite Spacecraft (MCS). The spacec…
▽ More
The Italian Spring Accelerometer (ISA) is a three axis mass-spring accelerometer, one of the payloads of the BepiColombo joint space mission between the European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA). At launch in October 2018, BepiColombo started its seven-year cruise as a stack of three different modules, overall named Mercury Composite Spacecraft (MCS). The spacecraft will provide BepiColombo the necessary Delta V to reach Mercury with its electric thrusters and along with one, two and six gravity assists, respectively with Earth, Venus and Mercury. The accelerometer is accommodated on the Mercury Planetary Orbiter (MPO) module and, jointly with the Ka-band Transponder (KaT) tracking data, will primarily serve the BepiColombo Radio Science Experiment (BC-RSE). During the second Venus swing-by, strong tidal effect and external perturbations was expected to act on the spacecraft and to become detectable by ISA. The swing-by had a closest approach of about 550 km and the gravity gradient expected on the IDA sensing elements was perfectly measured. Hence, in this paper, the first direct Gravity Gradient effect detection generated by an extraterrestrial body is shown. Nevertheless, around the closest approach, the measurements evidenced a spurious acceleration event lasting for several minutes. This work, exploiting information on the Attitude and Orbit Control System (AOCS) commanded torques, focuses and analyses this ISA acceleration signal, ascribing it to a net force really acting on the MCS spacecraft. Furthermore, using an estimation method, the application point of the force is confined to an area close to the MPO radiator.
△ Less
Submitted 3 September, 2024;
originally announced September 2024.
-
Towards imaging-spectro-polarimetry of solar flares in the X-rays
Authors:
Sergio Fabiani,
John Rankin,
Stefano Basso,
Enrico Costa,
Ettore Del Monte,
Klaus Desch,
Alessandro Di Marco,
Markus Gruber,
Jochen Kaminski,
Dawoon E. Kim,
Saba Imtiaz,
Carlo Lefevre,
Pasqualino Loffredo,
Hemant Manikantan,
Alfredo Morbidini,
Fabio Muleri,
Giovanni Pareschi,
Vladilavs Plesanovs,
Ajay Ratheesh,
Alda Rubini,
Paolo Soffitta,
Daniele Spiga
Abstract:
X-ray polarimetry of solar flares is still a not well established field of observation of our star. Past polarimeters were not able to measure with a high significance the polarization in X-rays from solar flares. Moreover, they had no imaging capabilities and measured only the polarization by integrating on all the image of the source. We propose a mission concept based on a gas photoelectric pol…
▽ More
X-ray polarimetry of solar flares is still a not well established field of observation of our star. Past polarimeters were not able to measure with a high significance the polarization in X-rays from solar flares. Moreover, they had no imaging capabilities and measured only the polarization by integrating on all the image of the source. We propose a mission concept based on a gas photoelectric polarimeter, coupled with multilayer lobster-eye optics, to perform imaging-spectro-polarimetry of solar flares while monitoring the entire solar disc.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Deuterium fractionation of the starless core L 1498
Authors:
Sheng-Jun Lin,
Shih-Ping Lai,
Laurent Pagani,
Charlène Lefèvre,
Travis J. Thieme
Abstract:
Molecular deuteration is commonly seen in starless cores and is expected to occur on a timescale comparable to that of the core contraction. Thus, the deuteration serves as a chemical clock, allowing us to investigate dynamical theories of core formation. We aim to provide a 3D cloud description for the starless core L 1498 located in the nearby low-mass star-forming region Taurus, and explore the…
▽ More
Molecular deuteration is commonly seen in starless cores and is expected to occur on a timescale comparable to that of the core contraction. Thus, the deuteration serves as a chemical clock, allowing us to investigate dynamical theories of core formation. We aim to provide a 3D cloud description for the starless core L 1498 located in the nearby low-mass star-forming region Taurus, and explore the possible core formation mechanism of L 1498. We carried out non-local thermal equilibrium radiative transfer with multi-transition observations of the high-density tracer N$_2$H$^+$ to derive the density and temperature profiles of the L 1498 core. Combining with the spectral observations of the deuterated species, ortho-H$_2$D$^+$, N$_2$D$^+$, and DCO$^+$, we derived the abundance profiles for observed species and performed chemical modeling of the deuteration profiles across L 1498 to constrain the contraction timescale. We present the first ortho-H$_2$D$^+$ (1$_{10}$-1$_{11}$) detection toward L 1498. We find a peak molecular hydrogen density of $1.6_{-0.3}^{+3.0}\times10^{5}$~cm$^{-3}$, a temperature of 7.5$_{-0.5}^{+0.7}$~K, and a N$_2$H$^+$ deuteration of 0.27$_{-0.15}^{+0.12}$ in the center. We derive a lower limit of the core age for L 1498 of 0.16~Ma which is compatible with the typical free-fall time, indicating that L 1498 likely formed rapidly.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Signatures of canted antiferromagnetism in infinite-layer nickelates studied by x-ray magnetic dichroism
Authors:
G. Krieger,
H. Sahib,
F. Rosa,
M. Rath,
Y. Chen,
A. Raji,
P. V. B. Pinho,
C. Lefevre,
G. Ghiringhelli,
A. Gloter,
N. Viart,
M. Salluzzo,
D. Preziosi
Abstract:
We report an experimental study of the magnetic properties of infinite-layer Nd1-xSrxNiO2 thin films by x-ray magnetic circular dichroism (XMCD) at Ni L3,2 and Nd M5,4 edges. We show that at low temperatures the out-of-plane component of the Ni1+ spin-moment is characterized by a rapid increase for magnetic fields below 1T , followed by a slower linear increase reaching a spin-moment value of 0.25…
▽ More
We report an experimental study of the magnetic properties of infinite-layer Nd1-xSrxNiO2 thin films by x-ray magnetic circular dichroism (XMCD) at Ni L3,2 and Nd M5,4 edges. We show that at low temperatures the out-of-plane component of the Ni1+ spin-moment is characterized by a rapid increase for magnetic fields below 1T , followed by a slower linear increase reaching a spin-moment value of 0.25uB/Ni at 9T in the case of superconducting Nd0.8Sr0.2NiO2. On the other hand, the Nd M5,4 XMCD shows a clear paramagnetic behaviour, which make both Ni- and Nd-spin-sublattices fully uncorrelated.The magnetic field and temperature dependencies of the Ni L3,2 XMCD data can be explained by assuming an out-of-plane canting of the strongly in-plane anti-ferromagnetic ordered Ni1+ spins. A symmetry lowering of the NiO2 planes observed via four-dimensional scanning transmission electron microscopy, triggering a DMI, can be responsible of the proposed Ni1+ spin-canting at zero-field. The resulting out-of-plane weak-ferromagnetic coupling under magnetic field explains the relatively large spin-moment and its magnetic field and temperature dependence.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Temperature compensation in high accuracy accelerometers using multi-sensor and machine learning methods
Authors:
Lorenzo Iafolla,
Francesco Santoli,
Roberto Carluccio,
Stefano Chiappini,
Emiliano Fiorenza,
Carlo Lefevre,
Pasqualino Loffredo,
Marco Lucente,
Alfredo Morbidini,
Alessandro Pignatelli,
Massimo Chiappini
Abstract:
Temperature is a major source of inaccuracy in high-sensitivity accelerometers and gravimeters. Active thermal control systems require power and may not be ideal in some contexts such as airborne or spaceborne applications. We propose a solution that relies on multiple thermometers placed within the accelerometer to measure temperature and thermal gradient variations. Machine Learning algorithms a…
▽ More
Temperature is a major source of inaccuracy in high-sensitivity accelerometers and gravimeters. Active thermal control systems require power and may not be ideal in some contexts such as airborne or spaceborne applications. We propose a solution that relies on multiple thermometers placed within the accelerometer to measure temperature and thermal gradient variations. Machine Learning algorithms are used to relate the temperatures to their effect on the accelerometer readings. However, obtaining labeled data for training these algorithms can be difficult. Therefore, we also developed a training platform capable of replicating temperature variations in a laboratory setting. Our experiments revealed that thermal gradients had a significant effect on accelerometer readings, emphasizing the importance of multiple thermometers. The proposed method was experimentally tested and revealed a great potential to be extended to other sources of inaccuracy, such as rotations, as well as to other types of measuring systems, such as magnetometers or gyroscopes.
△ Less
Submitted 4 January, 2024;
originally announced January 2024.
-
On geometric-type approximations with applications to risk and related processes
Authors:
Fraser Daly,
Claude Lefèvre
Abstract:
We explore two aspects of geometric approximation via a coupling approach to Stein's method. Firstly, we refine precision and increase scope for applications by convoluting the approximating geometric distribution with a simple translation selected based on the problem at hand. Secondly, we apply our geometric and geometric-type approximations to risk processes and related areas, including the app…
▽ More
We explore two aspects of geometric approximation via a coupling approach to Stein's method. Firstly, we refine precision and increase scope for applications by convoluting the approximating geometric distribution with a simple translation selected based on the problem at hand. Secondly, we apply our geometric and geometric-type approximations to risk processes and related areas, including the approximation of Poisson processes with a random time horizon and Markov chain hitting times. Particular attention is given to geometric approximation of random sums, for which explicit bounds are established. These are applied to give simple approximations, including error bounds, for the infinite-horizon ruin probability in the compound binomial risk process.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
Room-temperature magnetism and controlled cation distribution in vanadium ferrite thin films
Authors:
Antonio Peña Corredor,
Matthieu Gamarde,
Lamiae El Khabchi,
María José Vázquez Bernárdez,
Marc Lenertz,
Cédric Leuvrey,
Laurent Schlur,
François Roulland,
Nathalie Viart,
Christophe Lefevre
Abstract:
Spinel oxides demonstrate significant technological promise due to the vast array of interrelated physical properties that their unique structure supports. Specifically, the Fe1+xV2-xO4 spinel system garners extensive interest due to the presence of orbitally ordered states and multiferroism. This study focuses on the elaboration of high-quality Fe2VO4 (x = 1) thin films on MgO substrates via puls…
▽ More
Spinel oxides demonstrate significant technological promise due to the vast array of interrelated physical properties that their unique structure supports. Specifically, the Fe1+xV2-xO4 spinel system garners extensive interest due to the presence of orbitally ordered states and multiferroism. This study focuses on the elaboration of high-quality Fe2VO4 (x = 1) thin films on MgO substrates via pulsed laser deposition. Structural analyses confirm the epitaxial growth of the films, their high crystallinity and fully strained nature. The cationic distribution and stoichiometry were investigated using Resonant Elastic X-ray Scattering experiments, in conjunction with comprehensive characterization of the films' physical and electrical properties. The films exhibit room-temperature magnetism, with a magnetization consistent with the (Fe3+)Td[Fe2+V3+2]OhO4 inverse spinel structure unveiled by anomalous diffraction. This work represents the inaugural successful deposition of Fe2VO4 thin films, thereby expanding the family of spinel vanadium oxide thin films with a new member that demonstrates room-temperature magnetic properties.
△ Less
Submitted 18 July, 2023;
originally announced July 2023.
-
Spin transport properties of spinel vanadate-based heterostructures
Authors:
Antonio Peña Corredor,
Alberto Anadón,
Laurent Schlur,
Jérôme Robert,
Héloïse Damas,
Juan-Carlos Rojas-Sánchez,
Sébastien Petit-Watelot,
Nathalie Viart,
Daniele Preziosi,
Christophe Lefevre
Abstract:
Spin-orbit coupling and breaking of inversion symmetry are necessary ingredients to enable a pure spin current-based manipulation of the magnetization via the spin-orbit torque effect. Currently, magnetic insulator oxides with non-dissipative characteristics are being explored. When combined with non-magnetic heavy metals, known for their large spin-orbit coupling, they offer promising potential f…
▽ More
Spin-orbit coupling and breaking of inversion symmetry are necessary ingredients to enable a pure spin current-based manipulation of the magnetization via the spin-orbit torque effect. Currently, magnetic insulator oxides with non-dissipative characteristics are being explored. When combined with non-magnetic heavy metals, known for their large spin-orbit coupling, they offer promising potential for energy-efficient spin-orbitronics applications. The intrinsic electronic correlations characterizing those strongly correlated oxides hold the promises to add extra control-knobs to the desired efficient spin-wave propagation and abrupt magnetization switching phenomena. Spinel vanadate FeV2O4 (FVO) exhibits several structural phase transitions which are accompanied by an intricate interplay of magnetic, charge and orbital orderings. When grown as a thin film onto SrTiO3, the compressive strain state induces a perpendicular magnetic anisotropy, making FVO-based heterostructures desirable for spin-orbitronics applications. In this study, we have optimised the deposition of stoichiometric and epitaxial Pt/FVO heterostructures by Pulsed Laser Deposition and examined their spin-related phenomena. From angle-dependent magnetotransport measurements, we observed both Anisotropic Magnetoresistance (AMR) and Spin Hall Magnetoresistance (SMR) effects. Our findings show the SMR component as the primary contributor to the overall magnetoresistance, whose high value of 0.12% is only comparable to properly optimized oxide-based systems.
△ Less
Submitted 10 July, 2023;
originally announced July 2023.
-
New constraints on the presence of debris disks around G 196-3 B and VHS J125601.92-125723.9 b
Authors:
O. V. Zakhozhay,
M. R. Zapatero Osorio,
V. J. S. Bejar,
J. B. Climent,
J. C. Guirado,
B. Gauza,
N. Lodieu,
D. A. Semenov,
M. Perez-Torres,
R. Azulay,
R. Rebolo,
J. Martin-Pintado,
Ch. Lefevre
Abstract:
We obtained deep images of G 196-3 B and VHS J1256-1257 b with the NOrthern Extended Millimeter Array (NOEMA) at 1.3 mm. These data were combined with recently published Atacama Large Millimeter Array (ALMA) and Very Large Array (VLA) data of VHS J1256-1257 b at 0.87 mm and 0.9 cm, respectively. Neither G 196-3 B nor VHS J1256-1257 b were detected in the NOEMA, ALMA and VLA data. At 1.3 mm, we imp…
▽ More
We obtained deep images of G 196-3 B and VHS J1256-1257 b with the NOrthern Extended Millimeter Array (NOEMA) at 1.3 mm. These data were combined with recently published Atacama Large Millimeter Array (ALMA) and Very Large Array (VLA) data of VHS J1256-1257 b at 0.87 mm and 0.9 cm, respectively. Neither G 196-3 B nor VHS J1256-1257 b were detected in the NOEMA, ALMA and VLA data. At 1.3 mm, we imposed flux upper limits of 0.108 mJy (G 196-3 B) and 0.153 mJy (VHS J1256-1257 b) with a 3-sigma confidence. Using the flux upper limits at the millimeter and radio wavelength regimes, we derived maximum values of 0.016 M$_{\rm Earth}$ and 0.004 M$_{\rm Earth}$ for the mass of any cold dust that might be surrounding G 196-3 B and VHS J1256-1257 b, respectively. We put our results in the context of other deep millimeter observations of free-floating and companion objects with substellar masses smaller than 20 M$_{\rm Jupiter}$ and ages between 1 and a few hundred million years. Only two very young objects are detected out of a few tens concluding, as other groups did before, that the disks around these very low-mass objects must have small masses and possibly reduced sizes. If debris disks around substellar objects scale down in a similar manner as protoplanetary disks do, millimeter observations of moderately young brown dwarfs and planets must be at least two orders of magnitude deeper for being able to detect and characterize their surrounding debris disks.
△ Less
Submitted 21 March, 2023;
originally announced March 2023.
-
Unveiling Unconventional Ferroelectric Switching in Multiferroic Ga0.6 Fe1.4O3 Thin Films Through Multiscale Electron Microscopy Investigations
Authors:
Anna Demchenko,
Suvidyakumar Homkar,
Corinne Bouillet,
Christophe Lefèvre,
François Roulland,
Daniele Preziosi,
Gilles Versini,
Cédric Leuvrey,
Philippe Boullay,
Xavier Devaux,
Nathalie Viart
Abstract:
Understanding the polarization switching mechanisms at play in ferroelectric materials is crucial for their exploitation in electronic devices. The conventional centrosymmetric reference structure-based mechanism which accounts for ferroelectricity in most of the usual displacive ferroelectric materials is too energy-demanding for some newly diagnosed ferroelectric materials such as the Ga2-xFexO3…
▽ More
Understanding the polarization switching mechanisms at play in ferroelectric materials is crucial for their exploitation in electronic devices. The conventional centrosymmetric reference structure-based mechanism which accounts for ferroelectricity in most of the usual displacive ferroelectric materials is too energy-demanding for some newly diagnosed ferroelectric materials such as the Ga2-xFexO3 (0.8 < x < 1.4) compounds. Some alternative theoretical propositions have been made and need experimental confirmation. A dual-scale electron microscopy study is performed on thin films of the Ga0.6Fe1.4O3 multiferroic compound. A wide scale precession-assisted electron diffraction tomography study first allows the determination of the structure the compound adopts in thin films, and even permits the refinement of the atomic positions within this structure. Cationic mobility is suggested for two of the atomic positions through the existence of extra electronic density. A local in situ high resolution scanning transmission electron microscopy study then allows confirming these mobilities by directly spotting the cationic displacements on successively acquired images. The whole study confirms an unconventional switching mechanism via local domain wall motion in this compound.
△ Less
Submitted 12 July, 2022;
originally announced July 2022.
-
Thermal spin current generation in the multifunctional ferrimagnet Ga$_{0.6}$Fe$_{1.4}$O$_{3}$
Authors:
Alberto Anadón,
Elodie Martin,
Suvidyakumar Homkar,
Benjamin Meunier,
Maxime Verges,
Heloise Damas,
Junior Alegre,
Christophe Lefevre,
Francois Roulland,
Carsten Dubs,
Morris Lindner,
Ludovic Pasquier,
Olivier Copie,
Karine Dumesnil,
Rafael Ramos,
Daniele Preziosi,
Sébastien Petit-Watelot,
Nathalie Viart,
Juan-Carlos Rojas-Sánchez
Abstract:
In recent years, multifunctional materials have attracted increasing interest for magnetic memories and energy harvesting applications. Magnetic insulating materials are of special interest for this purpose, since they allow the design of more efficient devices due to the lower Joule heat losses. In this context, Ga$_{0.6}$Fe$_{1.4}$O$_3$ (GFO) is a good candidate for spintronics applications, sin…
▽ More
In recent years, multifunctional materials have attracted increasing interest for magnetic memories and energy harvesting applications. Magnetic insulating materials are of special interest for this purpose, since they allow the design of more efficient devices due to the lower Joule heat losses. In this context, Ga$_{0.6}$Fe$_{1.4}$O$_3$ (GFO) is a good candidate for spintronics applications, since it can exhibit multiferroicity and presents a spin Hall magnetoresistance similar to the one observed in a yttrium iron garnet (YIG)/Pt bilayer. Here, we explore GFO utilizing thermo-spin measurements in an on-chip approach. By carefully considering the geometry of our thermo-spin devices we are able to quantify the spin Seebeck effect and the spin current generation in a GFO/Pt bilayer, obtaining a value comparable to that of YIG/Pt. This further confirms the promises of an efficient spin current generation with the possibility of an electric-field manipulation of the magnetic properties of the system in an insulating ferrimagnetic material.
△ Less
Submitted 3 July, 2022; v1 submitted 27 June, 2022;
originally announced June 2022.
-
Calibration of the IXPE focal plane X-ray polarimeters to polarized radiation
Authors:
Alessandro Di Marco,
Sergio Fabiani,
Fabio La Monaca,
Fabio Muleri,
John Rankin,
Paolo Soffitta,
Fei Xie,
Fabrizio Amici,
Primo attinà,
Matteo Bachetti,
Luca Baldini,
Mattia Barbanera,
Wayne Baumgartner,
Ronaldo Bellazzini,
Fabio Borotto,
Alessandro Brez,
Daniele Brienza,
Ciro Caporale,
Claudia Cardelli,
Rita Carpentiero,
Simone Castellano,
Marco Castronuovo,
Luca Cavalli,
Elisabetta Cavazzuti,
Marco Ceccanti
, et al. (58 additional authors not shown)
Abstract:
IXPE (Imaging X-ray Polarimetry Explorer) is a NASA Small Explorer mission -- in partnership with the Italian Space Agency (ASI) -- dedicated to X-ray polarimetry in the 2--8 keV energy band. The IXPE telescope comprises three grazing incidence mirror modules coupled to three detector units hosting each one a Gas Pixel Detector (GPD), a gas detector that allows measuring the polarization degree by…
▽ More
IXPE (Imaging X-ray Polarimetry Explorer) is a NASA Small Explorer mission -- in partnership with the Italian Space Agency (ASI) -- dedicated to X-ray polarimetry in the 2--8 keV energy band. The IXPE telescope comprises three grazing incidence mirror modules coupled to three detector units hosting each one a Gas Pixel Detector (GPD), a gas detector that allows measuring the polarization degree by using the photoelectric effect. A wide and accurate ground calibration was carried out on the IXPE Detector Units (DUs) at INAF-IAPS, in Italy, where a dedicated facility was set-up at this aim. In this paper, we present the results obtained from this calibration campaign to study the IXPE focal plane detector response to polarized radiation. In particular, we report on the modulation factor, which is the main parameter to estimate the sensitivity of a polarimeter.
△ Less
Submitted 15 June, 2022;
originally announced June 2022.
-
Radio emission in a nearby ultracool dwarf binary: a multi-frequency study
Authors:
Juan B. Climent,
J. C. Guirado,
M. R. Zapatero-Osorio,
O. V. Zakhozhay,
M. A. Pérez-Torres,
R. Azulay,
B. Gauza,
R. Rebolo,
V. J. S. Béjar,
J. Martín-Pintado,
C. Lefèvre
Abstract:
The substellar triple system VHS J125601.92$-$125723.9 is composed by an equal-mass M7.5 brown dwarf binary and a L7 low-mass substellar object. In this work, we aim to identify the origin of the radio emission occurring in the central binary of VHS 1256$-$1257 while discussing the expected mechanisms involved in the radio emission of ultracool dwarfs (UCDs). We observed this system with the Karl…
▽ More
The substellar triple system VHS J125601.92$-$125723.9 is composed by an equal-mass M7.5 brown dwarf binary and a L7 low-mass substellar object. In this work, we aim to identify the origin of the radio emission occurring in the central binary of VHS 1256$-$1257 while discussing the expected mechanisms involved in the radio emission of ultracool dwarfs (UCDs). We observed this system with the Karl G. Jansky Very Large Array, the European very-long-baseline interferometry (VLBI) Network, the enhanced Multi Element Remotely Linked Interferometer Network, the NOrthern Extended Millimeter Array, and the Atacama Large Millimetre Array at frequencies ranging from 5 GHz up to 345 GHz in several epochs during 2017, 2018, and 2019. We have found radio emission at 6 GHz and 33 GHz coincident with the expected position of the central binary of VHS~1256$-$1257. The Stokes I density flux detected were 73 $\pm$ 4 $μ$Jy and 83 $\pm$ 13 $μ$Jy, respectively, with no detectable circular polarisation or pulses. No emission is detected at higher frequencies (230 GHz and 345 GHz) nor at 5 GHz with VLBI arrays. The emission appears to be stable over almost 3 years at 6 GHz. To explain the constraints obtained both from the detections and non-detections we considered multiple scenarios including thermal and non-thermal emission, and different contributions from each component of the binary. Our results can be well explained by non-thermal gyrosynchrotron emission originating at radiation belts with a low plasma density (n$_e$ = 300$-$700 cm$^{-3}$), a moderate magnetic field strength (B $\approx$ 140 G), and an energy distribution of electrons following a power-law ($d N / d E \propto E^{- δ}$) with $δ$ fixed at 1.36. These radiation belts would need to be present in both components and also be viewed equatorially.
△ Less
Submitted 29 January, 2022;
originally announced January 2022.
-
Spin current transport in hybrid Pt / multifunctional magnetoelectric Ga0.6Fe1.4O3 bilayers
Authors:
Suvidyakumar Homkar,
Elodie Martin,
Benjamin Meunier,
Alberto Anadon-Barcelona,
Corinne Bouillet,
Jon Gorchon,
Karine Dumesnil,
Christophe Lefèvre,
François Roulland,
Olivier Copie,
Daniele Preziosi,
Sébastien Petit-Watelot,
Juan-Carlos Rojas-Sánchez,
Nathalie Viart
Abstract:
The low power manipulation of magnetization is currently a highly sought-after objective in spintronics. Non ferromagnetic large spin-orbit coupling heavy metal (NM) / ferromagnet (FM) heterostructures offer interesting elements of response to this issue, by granting the manipulation of the FM magnetization by the NM spin Hall effect (SHE) generated spin current. Additional functionalities, such a…
▽ More
The low power manipulation of magnetization is currently a highly sought-after objective in spintronics. Non ferromagnetic large spin-orbit coupling heavy metal (NM) / ferromagnet (FM) heterostructures offer interesting elements of response to this issue, by granting the manipulation of the FM magnetization by the NM spin Hall effect (SHE) generated spin current. Additional functionalities, such as the electric field control of the spin current generation, can be offered using multifunctional ferromagnets. We have studied the spin current transfer processes between Pt and the multifunctional magnetoelectric Ga0.6Fe1.4O3 (GFO). In particular, via angular dependent magnetotransport measurements, we were able to differentiate between magnetic proximity effect (MPE)-induced anisotropic magnetoresistance (AMR) and spin Hall magnetoresistance (SMR). Our analysis shows that SMR is the dominant phenomenon at all temperatures and is the only one to be considered near room temperature, with a magnitude comparable to those observed in Pd/YIG or Pt/YIG heterostructures. These results indicate that magnetoelectric GFO thin films show promises for achieving an electric-field control of the spin current generation in NM/FM oxide-based heterostructures.
△ Less
Submitted 20 December, 2021;
originally announced December 2021.
-
The Imaging X-Ray Polarimetry Explorer (IXPE): Pre-Launch
Authors:
Martin C. Weisskopf,
Paolo Soffitta,
Luca Baldini,
Brian D. Ramsey,
Stephen L. O'Dell,
Roger W. Romani,
Giorgio Matt,
William D. Deininger,
Wayne H. Baumgartner,
Ronaldo Bellazzini,
Enrico Costa,
Jeffery J. Kolodziejczak,
Luca Latronico,
Herman L. Marshall,
Fabio Muleri,
Stephen D. Bongiorno,
Allyn Tennant,
Niccolo Bucciantini,
Michal Dovciak,
Frederic Marin,
Alan Marscher,
Juri Poutanen,
Pat Slane,
Roberto Turolla,
William Kalinowski
, et al. (133 additional authors not shown)
Abstract:
Scheduled to launch in late 2021, the Imaging X-ray Polarimetry Explorer (IXPE) is a NASA Small Explorer Mission in collaboration with the Italian Space Agency (ASI). The mission will open a new window of investigation - imaging X-ray polarimetry. The observatory features 3 identical telescopes each consisting of a mirror module assembly with a polarization-sensitive imaging X-ray detector at the…
▽ More
Scheduled to launch in late 2021, the Imaging X-ray Polarimetry Explorer (IXPE) is a NASA Small Explorer Mission in collaboration with the Italian Space Agency (ASI). The mission will open a new window of investigation - imaging X-ray polarimetry. The observatory features 3 identical telescopes each consisting of a mirror module assembly with a polarization-sensitive imaging X-ray detector at the focus. A coilable boom, deployed on orbit, provides the necessary 4-m focal length. The observatory utilizes a 3-axis-stabilized spacecraft which provides services such as power, attitude determination and control, commanding, and telemetry to the ground. During its 2-year baseline mission, IXPE will conduct precise polarimetry for samples of multiple categories of X-ray sources, with follow-on observations of selected targets.
△ Less
Submitted 21 December, 2021; v1 submitted 2 December, 2021;
originally announced December 2021.
-
Calibration of the IXPE instrument
Authors:
Fabio Muleri,
Carlo Lefevre,
Raffaele Piazzolla,
Alfredo Morbidini,
Fabrizio Amici,
Primo Attinà,
Mauro Centrone,
Ettore Del Monte,
Sergio Di Cosimo,
Giuseppe Di Persio,
Yuri Evangelista,
Sergio Fabiani,
Riccardo Ferrazzoli,
Pasqualino Loffredo,
Luca Maiolo,
Francesco Maita,
Leandra Primicino,
John Rankin,
Alda Rubini,
Francesco Santoli,
Paolo Soffitta,
Antonino Tobia,
Alessia Tortosa,
Alessio Trois
Abstract:
IXPE scientific payload comprises of three telescopes, each composed of a mirror and a photoelectric polarimeter based on the Gas Pixel Detector design. The three focal plane detectors, together with the unit which interfaces them to the spacecraft, are named IXPE Instrument and they will be built and calibrated in Italy; in this proceeding, we will present how IXPE Instrument will be calibrated,…
▽ More
IXPE scientific payload comprises of three telescopes, each composed of a mirror and a photoelectric polarimeter based on the Gas Pixel Detector design. The three focal plane detectors, together with the unit which interfaces them to the spacecraft, are named IXPE Instrument and they will be built and calibrated in Italy; in this proceeding, we will present how IXPE Instrument will be calibrated, both on-ground and in-flight. The Instrument Calibration Equipment is being finalized at INAF-IAPS in Rome (Italy) to produce both polarized and unpolarized radiation, with a precise knowledge of direction, position, energy and polarization state of the incident beam. In flight, a set of four calibration sources based on radioactive material and mounted on a filter and calibration wheel will allow for the periodic calibration of all of the three IXPE focal plane detectors independently. A highly polarized source and an unpolarized one will be used to monitor the response to polarization; the remaining two will be used to calibrate the gain through the entire lifetime of the mission.
△ Less
Submitted 29 November, 2021;
originally announced November 2021.
-
The Physical Properties of the SVS 13 Protobinary System: Two Circumstellar Disks and a Spiraling Circumbinary Disk in the Making
Authors:
Ana K. Diaz-Rodriguez,
Guillem Anglada,
Guillermo Blázquez-Calero,
Mayra Osorio,
José F. Gómez,
Gary A. Fuller,
Robert Estalella,
José M. Torrelles,
Sylvie Cabrit,
Luis F. Rodríguez,
Charlène Lefèvre,
Enrique Macías,
Carlos Carrasco-González,
Luis A. Zapata,
Itziar de Gregorio-Monsalvo,
Paul T. P. Ho
Abstract:
We present VLA and ALMA observations of the close (0.3" = 90 au separation) protobinary system SVS 13. We detect two small circumstellar disks (radii $\sim$12 and $\sim$9 au in dust, and $\sim$30 au in gas) with masses of $\sim$0.004-0.009 $M_{sun}$ for VLA 4A (the western component) and $\sim$0.009-0.030 $M_{sun}$ for VLA 4B (the eastern component). A circumbinary disk with prominent spiral arms…
▽ More
We present VLA and ALMA observations of the close (0.3" = 90 au separation) protobinary system SVS 13. We detect two small circumstellar disks (radii $\sim$12 and $\sim$9 au in dust, and $\sim$30 au in gas) with masses of $\sim$0.004-0.009 $M_{sun}$ for VLA 4A (the western component) and $\sim$0.009-0.030 $M_{sun}$ for VLA 4B (the eastern component). A circumbinary disk with prominent spiral arms extending $\sim$500 au and a mass of $\sim$0.052 $M_{sun}$ appears to be in the earliest stages of formation. The dust emission is more compact and with a very high optical depth toward VLA 4B, while toward VLA 4A the dust column density is lower, allowing the detection of stronger molecular transitions. We infer rotational temperatures of $\sim$140 K, on scales of $\sim$30 au, across the whole source, and a rich chemistry. Molecular transitions typical of hot corinos are detected toward both protostars, being stronger toward VLA 4A, with several ethylene glycol transitions detected only toward this source. There are clear velocity gradients, that we interpret in terms of infall plus rotation of the circumbinary disk, and purely rotation of the circumstellar disk of VLA 4A. We measured orbital proper motions and determined a total stellar mass of 1 $M_{sun}$. From the molecular kinematics we infer the geometry and orientation of the system, and stellar masses of $\sim$0.26 $M_{sun}$ for VLA 4A and $\sim$0.60 $M_{sun}$ for VLA 4B.
△ Less
Submitted 29 December, 2021; v1 submitted 23 November, 2021;
originally announced November 2021.
-
The IXPE Instrument Calibration Equipment
Authors:
Fabio Muleri,
Raffaele Piazzolla,
Alessandro Di Marco,
Sergio Fabiani,
Fabio La Monaca,
Carlo Lefevre,
Alfredo Morbidini,
John Rankin,
Paolo Soffitta,
Antonino Tobia,
Fei Xie,
Fabrizio Amici,
Primo Attinà,
Matteo Bachetti,
Daniele Brienza,
Mauro Centrone,
Enrico Costa,
Ettore Del Monte,
Sergio Di Cosimo,
Giuseppe Di Persio,
Yuri Evangelista,
Riccardo Ferrazzoli,
Pasqualino Loffredo,
Matteo Perri,
Maura Pilia
, et al. (6 additional authors not shown)
Abstract:
The Imaging X-ray Polarimetry Explorer is a mission dedicated to the measurement of X-ray polarization from tens of astrophysical sources belonging to different classes. Expected to be launched at the end of 2021, the payload comprises three mirrors and three focal plane imaging polarimeters, the latter being designed and built in Italy. While calibration is always an essential phase in the develo…
▽ More
The Imaging X-ray Polarimetry Explorer is a mission dedicated to the measurement of X-ray polarization from tens of astrophysical sources belonging to different classes. Expected to be launched at the end of 2021, the payload comprises three mirrors and three focal plane imaging polarimeters, the latter being designed and built in Italy. While calibration is always an essential phase in the development of high-energy space missions, for IXPE it has been particularly extensive both to calibrate the response to polarization, which is peculiar to IXPE, and to achieve a statistical uncertainty below the expected sensitivity. In this paper we present the calibration equipment that was designed and built at INAF-IAPS in Rome, Italy, for the calibration of the polarization-sensitive focal plane detectors on-board IXPE. Equipment includes calibration sources, both polarized and unpolarized, stages to align and move the beam, test detectors and their mechanical assembly. While all these equipments were designed to fit the specific needs of the IXPE Instrument calibration, their versatility could also be used in the future for other projects.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
The Instrument of the Imaging X-ray Polarimetry Explorer
Authors:
Paolo Soffitta,
Luca Baldini,
Ronaldo Bellazzini,
Enrico Costa,
Luca Latronico,
Fabio Muleri,
Ettore Del Monte,
Sergio Fabiani,
Massimo Minuti,
Michele Pinchera,
Carmelo Sgrò,
Gloria Spandre,
Alessio Trois,
Fabrizio Amici,
Hans Andersson,
Primo Attinà,
Matteo Bachetti,
Mattia Barbanera,
Fabio Borotto,
Alessandro Brez,
Daniele Brienza,
Ciro Caporale,
Claudia Cardelli,
Rita Carpentiero,
Simone Castellano
, et al. (56 additional authors not shown)
Abstract:
While X-ray Spectroscopy, Timing and Imaging have improved verymuch since 1962, when the first astronomical non-solar source was discovered, especially with the launch of Newton/X-ray Multi-Mirror Mission, Rossi/X-ray Timing Explorer and Chandra/Advanced X-ray Astrophysics Facility, the progress of X-ray polarimetry has been meager. This is in part due to the lack of sensitive polarization detecto…
▽ More
While X-ray Spectroscopy, Timing and Imaging have improved verymuch since 1962, when the first astronomical non-solar source was discovered, especially with the launch of Newton/X-ray Multi-Mirror Mission, Rossi/X-ray Timing Explorer and Chandra/Advanced X-ray Astrophysics Facility, the progress of X-ray polarimetry has been meager. This is in part due to the lack of sensitive polarization detectors, in part due to the fate of approved missions and in part because the celestial X-ray sources appeared less polarized than expected. Only one positive measurement has been available until now. Indeed the eight Orbiting Solar Observatory measured the polarization of the Crab nebula in the 70s.
The advent of techniques of microelectronics allowed for designing a detector based on the photoelectric effect in gas in an energy range where the optics are efficient in focusing X-rays. Herewe describe the Instrument, which is the major contribution of the Italian collaboration to the SmallExplorer mission called IXPE, the Imaging X-ray Polarimetry Explorer, which will be flown in late 2021. The instrument, is composed of three Detector Units, based on this technique, and a Detector Service Unit. Three Mirror Modules provided by Marshall Space Flight Center focus X-rays onto the detectors. In the following we will show the technological choices, their scientific motivation and the results from the calibration of the Instrument.
IXPE will perform imaging, timing and energy resolved polarimetry in the 2-8 keV energy band opening this window of X-ray astronomy to tens of celestial sources of almost all classes.
△ Less
Submitted 31 July, 2021;
originally announced August 2021.
-
Design, Construction, and Test of the Gas Pixel Detectors for the IXPE Mission
Authors:
L. Baldini,
M. Barbanera,
R. Bellazzini,
R. Bonino,
F. Borotto,
A. Brez,
C. Caporale,
C. Cardelli,
S. Castellano,
M. Ceccanti,
S. Citraro,
N. Di Lalla,
L. Latronico,
L. Lucchesi,
C. Magazzù,
G. Magazzù,
S. Maldera,
A. Manfreda,
M. Marengo,
A. Marrocchesi,
P. Mereu,
M. Minuti,
F. Mosti,
H. Nasimi,
A. Nuti
, et al. (69 additional authors not shown)
Abstract:
Due to be launched in late 2021, the Imaging X-Ray Polarimetry Explorer (IXPE) is a NASA Small Explorer mission designed to perform polarization measurements in the 2-8 keV band, complemented with imaging, spectroscopy and timing capabilities. At the heart of the focal plane is a set of three polarization-sensitive Gas Pixel Detectors (GPD), each based on a custom ASIC acting as a charge-collectin…
▽ More
Due to be launched in late 2021, the Imaging X-Ray Polarimetry Explorer (IXPE) is a NASA Small Explorer mission designed to perform polarization measurements in the 2-8 keV band, complemented with imaging, spectroscopy and timing capabilities. At the heart of the focal plane is a set of three polarization-sensitive Gas Pixel Detectors (GPD), each based on a custom ASIC acting as a charge-collecting anode. In this paper we shall review the design, manufacturing, and test of the IXPE focal-plane detectors, with particular emphasis on the connection between the science drivers, the performance metrics and the operational aspects. We shall present a thorough characterization of the GPDs in terms of effective noise, trigger efficiency, dead time, uniformity of response, and spectral and polarimetric performance. In addition, we shall discuss in detail a number of instrumental effects that are relevant for high-level science analysis -- particularly as far as the response to unpolarized radiation and the stability in time are concerned.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
Discovery of an Edge-on Circumstellar Debris Disk Around BD+45$^{\circ}$598: a Newly Identifed Member of the $β$ Pictoris Moving Group
Authors:
Sasha Hinkley,
Elisabeth C. Matthews,
Charlène Lefevre,
Jean-Francois Lestrade,
Grant Kennedy,
Dimitri Mawet,
Karl R. Stapelfeldt,
Shrishmoy Ray,
Eric Mamajek,
Brendan P. Bowler,
David Wilner,
Jonathan Williams,
Megan Ansdell,
Mark Wyatt,
Alexis Lau,
Mark W. Phillips Jorge Fernandez Fernandez,
Jonathan Gagné,
Emma Bubb,
Ben J. Sutlieff,
Thomas J. G. Wilson,
Brenda Matthews,
Henry Ngo,
Danielle Piskorz,
Justin R. Crepp,
Erica Gonzalez
, et al. (2 additional authors not shown)
Abstract:
We report the discovery of a circumstellar debris disk viewed nearly edge-on and associated with the young, K1 star BD+45$^{\circ}$598 using high-contrast imaging at 2.2$μ$m obtained at the W.M.~Keck Observatory. We detect the disk in scattered light with a peak significance of $\sim$5$σ$ over three epochs, and our best-fit model of the disk is an almost edge-on $\sim$70 AU ring, with inclination…
▽ More
We report the discovery of a circumstellar debris disk viewed nearly edge-on and associated with the young, K1 star BD+45$^{\circ}$598 using high-contrast imaging at 2.2$μ$m obtained at the W.M.~Keck Observatory. We detect the disk in scattered light with a peak significance of $\sim$5$σ$ over three epochs, and our best-fit model of the disk is an almost edge-on $\sim$70 AU ring, with inclination angle $\sim$87$^\circ$. Using the NOEMA interferometer at the Plateau de Bure Observatory operating at 1.3mm, we find resolved continuum emission aligned with the ring structure seen in the 2.2$μ$m images. We estimate a fractional infrared luminosity of $L_{IR}/L_{tot}$ $\simeq6^{+2}_{-1}$$\times$$10^{-4}$, higher than that of the debris disk around AU Mic. Several characteristics of BD+45$^{\circ}$598, such as its galactic space motion, placement in a color-magnitude diagram, and strong presence of Lithium, are all consistent with its membership in the $β$ Pictoris Moving Group with an age of 23$\pm$3 Myr. However, the galactic position for BD+45$^{\circ}$598 is slightly discrepant from previously-known members of the $β$ Pictoris Moving Group, possibly indicating an extension of members of this moving group to distances of at least 70pc. BD+45$^{\circ}$598 appears to be an example from a population of young circumstellar debris systems associated with newly identified members of young moving groups that can be imaged in scattered light, key objects for mapping out the early evolution of planetary systems from $\sim$10-100 Myr. This target will also be ideal for northern-hemisphere, high-contrast imaging platforms to search for self-luminous, planetary mass companions residing in this system.
△ Less
Submitted 23 March, 2021;
originally announced March 2021.
-
Unusual direction-dependent magnetic orbital moment obtained from X-ray magnetic circular dichroism in a multiferroic oxide system
Authors:
D. Preziosi,
S. Homkar,
C. Lefevre,
M. Salluzzo,
N. Viart
Abstract:
The electric-field control of $d$-electron magnetism in multiferroic transition metal oxides is attracting widespread interest for the underlying fundamental physics and for next generation spintronic devices. Here, we report an extensive study of the $3d$ magnetism in magnetoelectric Ga$_{0.6}$Fe$_{1.4}$O$_3$ (GFO) epitaxial films by polarization dependent x-ray absorption spectroscopy. We found…
▽ More
The electric-field control of $d$-electron magnetism in multiferroic transition metal oxides is attracting widespread interest for the underlying fundamental physics and for next generation spintronic devices. Here, we report an extensive study of the $3d$ magnetism in magnetoelectric Ga$_{0.6}$Fe$_{1.4}$O$_3$ (GFO) epitaxial films by polarization dependent x-ray absorption spectroscopy. We found a non-zero integral of the x-ray magnetic circular dichroism, with a sign depending upon the relative orientation between the external magnetic field and the crystallographic axes. %By reliably enlarging the limit of the spin and orbital sum rules, which usually holds for materials where the magnetic ions exhibit a unique crystal field symmetry This finding translates in a sign-reversal between the average Fe magnetic orbital and spin moments. Large Fe-displacements, among some of the octahedral sites, lower the symmetry of the system producing anisotropic paths for the Fe-O bondings giving rise to a large orbital-lattice interaction akin to a preferential crystallographic direction for the magnetic orbital moment. The latter may lead to a partial re-orientation of the magnetic orbital moment under an external magnetic field that, combined to the ferrimagnetic nature of the GFO, can qualitatively explain the observed sign-reversal of the XMCD integral. The results suggest that a control over the local symmetry of the oxygen octahedra in transition metal oxides can offer a suitable leverage over the manipulation of the effective orbital and spin moments in magnetoelectric systems.
△ Less
Submitted 11 May, 2021; v1 submitted 24 February, 2021;
originally announced February 2021.
-
Multi-wavelength observations and modelling of a quiescent cloud LDN1512
Authors:
M. Saajasto,
M. Juvela,
C. Lefevre,
L. Pagani,
N. Ysard
Abstract:
Light scattering at near-infrared wavelengths has been used to study the optical properties of the interstellar dust grains, but these studies are limited by the assumptions on the strength of the radiation field. On the other hand, thermal dust emission can be used to constrain the properties of the radiation field, although this is hampered by uncertainty about the dust emissivity. We test if cu…
▽ More
Light scattering at near-infrared wavelengths has been used to study the optical properties of the interstellar dust grains, but these studies are limited by the assumptions on the strength of the radiation field. On the other hand, thermal dust emission can be used to constrain the properties of the radiation field, although this is hampered by uncertainty about the dust emissivity. We test if current dust models allow us to model a molecular cloud simultaneously in the near infrared (NIR) and far infrared (FIR) wavelengths and compare the results with observations. Our aim is to place constraints on the properties of the dust grains and the strength of the radiation field. We present computations of dust emission and scattered light of a quiescent molecular cloud LDN1512. We construct radiative transfer models for LDN1512 that include an anisotropic radiation field and a three-dimensional cloud model. We are able to reproduce the observed FIR observations, with a radiation field derived from the DIRBE observations, with all of the tested dust models. However, with the same density distribution and the assumed radiation field, the models fail to reproduce the observed NIR scattering in all cases except for models that take into account dust evolution via coagulation and mantle formation. We find that the column densities derived from our radiative transfer modelling can differ by a factor of up to two, compared to the column densities derived from the observations with modified blackbody fits. The discrepancy in the column densities is likely caused because of temperature difference between a modified blackbody fit and the real spectra.
We show that the observed dust emission can be reproduced with several different assumptions about the properties of the dust grains. However, in order to reproduce the observed scattered surface brightness dust evolution must be taken into account.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Evolution of dust porosity through coagulation and shattering in the interstellar medium
Authors:
Hiroyuki Hirashita,
Vladimir B. Il'in,
Laurent Pagani,
Charlène Lefèvre
Abstract:
The properties of interstellar grains, such as grain size distribution and grain porosity, are affected by interstellar processing, in particular, coagulation and shattering, which take place in the dense and diffuse interstellar medium (ISM), respectively. In this paper, we formulate and calculate the evolution of grain size distribution and grain porosity through shattering and coagulation. For…
▽ More
The properties of interstellar grains, such as grain size distribution and grain porosity, are affected by interstellar processing, in particular, coagulation and shattering, which take place in the dense and diffuse interstellar medium (ISM), respectively. In this paper, we formulate and calculate the evolution of grain size distribution and grain porosity through shattering and coagulation. For coagulation, we treat the grain evolution depending on the collision energy. Shattering is treated as a mechanism of forming small compact fragments. The balance between these processes are determined by the dense-gas mass fraction $η_\mathrm{dense}$, which determines the time fraction of coagulation relative to shattering. We find that the interplay between shattering supplying small grains and coagulation forming porous grains from shattered grains is fundamentally important in creating and maintaining porosity. The porosity rises to 0.7--0.9 (or the filling factor 0.3--0.1) around grain radii $a\sim 0.1~μ$m. We also find that, in the case of $η_\mathrm{dense}=0.1$ (very efficient shattering with weak coagulation) porosity significantly enhances coagulation, creating fluffy submicron grains with filling factors lower than 0.1. The porosity enhances the extinction by 10--20 per cent at all wavelengths for amorphous carbon and at ultraviolet wavelengths for silicate. The extinction curve shape of silicate becomes steeper if we take porosity into account. We conclude that the interplay between shattering and coagulation is essential in creating porous grains in the interstellar medium and that the resulting porosity can impact the grain size distributions and extinction curves.
△ Less
Submitted 6 January, 2021;
originally announced January 2021.
-
In-flight calibration system of Imaging X-ray Polarimetry Explorer
Authors:
Riccardo Ferrazzoli,
Fabio Muleri,
Carlo Lefevre,
Alfredo Morbidini,
Fabrizio Amici,
Daniele Brienza,
Enrico Costa,
Ettore Del Monte,
Alessandro Di Marco,
Giuseppe Di Persio,
Immacolata Donnarumma,
Sergio Fabiani,
Fabio La Monaca,
Pasqualino Loffredo,
Luca Maiolo,
Francesco Maita,
Raffaele Piazzolla,
Brian Ramsey,
John Rankin,
Ajay Ratheesh,
Alda Rubini,
Paolo Sarra,
Paolo Soffitta,
Antonino Tobia,
Fei Xie
Abstract:
The NASA/ASI Imaging X-ray Polarimetry Explorer, which will be launched in 2021, will be the first instrument to perform spatially resolved X-ray polarimetry on several astronomical sources in the 2-8 keV energy band. These measurements are made possible owing to the use of a gas pixel detector (GPD) at the focus of three X-ray telescopes. The GPD allows simultaneous measurements of the interactio…
▽ More
The NASA/ASI Imaging X-ray Polarimetry Explorer, which will be launched in 2021, will be the first instrument to perform spatially resolved X-ray polarimetry on several astronomical sources in the 2-8 keV energy band. These measurements are made possible owing to the use of a gas pixel detector (GPD) at the focus of three X-ray telescopes. The GPD allows simultaneous measurements of the interaction point, energy, arrival time, and polarization angle of detected X-ray photons. The increase in sensitivity, achieved 40 years ago, for imaging and spectroscopy with the Einstein satellite will thus be extended to X-ray polarimetry for the first time. The characteristics of gas multiplication detectors are subject to changes over time. Because the GPD is a novel instrument, it is particularly important to verify its performance and stability during its mission lifetime. For this purpose, the spacecraft hosts a filter and calibration set (FCS), which includes both polarized and unpolarized calibration sources for performing in-flight calibration of the instruments. In this study, we present the design of the flight models of the FCS and the first measurements obtained using silicon drift detectors and CCD cameras, as well as those obtained in thermal vacuum with the flight units of the GPD. We show that the calibration sources successfully assess and verify the functionality of the GPD and validate its scientific results in orbit; this improves our knowledge of the behavior of these detectors in X-ray polarimetry.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Radio telescope total power mode: improving observation efficiency
Authors:
Laurent Pagani,
David Frayer,
Bruno Pagani,
Charlène Lefèvre
Abstract:
Aims. Radio observing efficiency can be improved by calibrating and reducing the observations in total power mode rather than in frequency, beam, or position-switching modes. Methods. We selected a sample of spectra obtained from the Institut de Radio-Astronomie Millimétrique (IRAM) 30-m telescope and the Green Bank Telescope (GBT) to test the feasibility of the method. Given that modern front-end…
▽ More
Aims. Radio observing efficiency can be improved by calibrating and reducing the observations in total power mode rather than in frequency, beam, or position-switching modes. Methods. We selected a sample of spectra obtained from the Institut de Radio-Astronomie Millimétrique (IRAM) 30-m telescope and the Green Bank Telescope (GBT) to test the feasibility of the method. Given that modern front-end amplifiers for the GBT and direct Local Oscillator injection for the 30 m telescope provide smooth pass bands that are a few tens of megahertz in width, the spectra from standard observations can be cleaned (baseline removal) separately and then co-added directly when the lines are narrow enough (a few km/s), instead of performing the traditional ON minus OFF data reduction. This technique works for frequency-switched observations as well as for position- and beam-switched observations when the ON and OFF data are saved separately. Results. The method works best when the lines are narrow enough and not too numerous so that a secure baseline removal can be achieved. A signal-to-noise ratio improvement of a factor of sqrt(2) is found in most cases, consistent with theoretical expectations. Conclusions. By keeping the traditional observing mode, the fallback solution of the standard reduction technique is still available in cases of suboptimal baseline behavior, sky instability, or wide lines, and to confirm the line intensities. These techniques of total-power-mode reduction can be applied to any radio telescope with stable baselines as long as they record and deliver the ONs and OFFs separately, as is the case for the GBT.
△ Less
Submitted 1 October, 2020;
originally announced October 2020.
-
Physical and chemical modeling of the starless core L1512
Authors:
Sheng-Jun Lin,
Laurent Pagani,
Shih-Ping Lai,
Charlène Lefèvre,
François Lique
Abstract:
The deuterium fractionation in starless cores gives us a clue to estimate their lifetime scales, thus allowing us to distinguish between different dynamical theories of core formation. Cores also seem to be subject to a differential N2 and CO depletion which was not expected from models. We aim to make a survey of 10 cores to estimate their lifetime scales and depletion profiles in detail. After L…
▽ More
The deuterium fractionation in starless cores gives us a clue to estimate their lifetime scales, thus allowing us to distinguish between different dynamical theories of core formation. Cores also seem to be subject to a differential N2 and CO depletion which was not expected from models. We aim to make a survey of 10 cores to estimate their lifetime scales and depletion profiles in detail. After L183, in Serpens, we present the second cloud of the series, L1512 in Auriga. To constrain the lifetime scale, we perform chemical modeling of the deuteration profiles across L1512 based on dust extinction measurements from near-infrared observations and non-local thermal equilibrium radiative transfer with multiple line observations of N2H+, N2D+, DCO+, C18O, and 13CO, plus H2D+ (1$_{10}$--1$_{11}$). We find a peak density of 1.1$\times$10$^5$ cm$^{-3}$ and a central temperature of 7.5$\pm$1 K, which are respectively higher and lower compared with previous dust emission studies. The depletion factors of N2H+ and N2D+ are 27$^{+17}_{-13}$ and 4$^{+2}_{-1}$ in L1512, intermediate between the two other more advanced and denser starless core cases, L183 and L1544. These factors also indicate a similar freeze-out of N2 in L1512, compared to the two others despite a peak density one to two orders of magnitude lower. Retrieving CO and N2 abundance profiles with the chemical model, we find that CO has a depletion factor of $\sim$430-870 and the N2 profile is similar to that of CO unlike towards L183. Therefore, L1512 has probably been living long enough so that N2 chemistry has reached steady state. N2H+ modeling remains compulsory to assess the precise physical conditions in the center of cold starless cores, rather than dust emission. L1512 is presumably older than 1.4 Myr. Therefore, the dominating core formation mechanism should be ambipolar diffusion for this source.
△ Less
Submitted 18 February, 2020; v1 submitted 4 February, 2020;
originally announced February 2020.
-
Questioning the spatial origin of complex organic molecules in young protostars with the CALYPSO survey
Authors:
A. Belloche,
A. J. Maury,
S. Maret,
S. Anderl,
A. Bacmann,
Ph. André,
S. Bontemps,
S. Cabrit,
C. Codella,
M. Gaudel,
F. Gueth,
C. Lefèvre,
B. Lefloch,
L. Podio,
L. Testi
Abstract:
Complex organic molecules (COMs) have been detected in a few Class 0 protostars but their origin is not well understood. Going beyond studies of individual objects, we want to investigate the origin of COMs in young protostars on a statistical basis. We use the CALYPSO survey performed with the IRAM PdBI to search for COMs at high angular resolution in a sample of 26 solar-type protostars, includi…
▽ More
Complex organic molecules (COMs) have been detected in a few Class 0 protostars but their origin is not well understood. Going beyond studies of individual objects, we want to investigate the origin of COMs in young protostars on a statistical basis. We use the CALYPSO survey performed with the IRAM PdBI to search for COMs at high angular resolution in a sample of 26 solar-type protostars, including 22 Class 0 and four Class I objects. Methanol is detected in 12 sources and tentatively in one source, which represents half of the sample. Eight sources (30%) have detections of at least three COMs. We find a strong chemical differentiation in multiple systems with five systems having one component with at least three COMs detected but the other component devoid of COM emission. The internal luminosity is found to be the source parameter impacting the most the COM chemical composition of the sources, while there is no obvious correlation between the detection of COM emission and that of a disk-like structure. A canonical hot-corino origin may explain the COM emission in four sources, an accretion-shock origin in two or possibly three sources, and an outflow origin in three sources. The CALYPSO sources with COM detections can be classified into three groups on the basis of the abundances of oxygen-bearing molecules, cyanides, and CHO-bearing molecules. These chemical groups correlate neither with the COM origin scenarii, nor with the evolutionary status of the sources if we take the ratio of envelope mass to internal luminosity as an evolutionary tracer. We find strong correlations between molecules that are a priori not related chemically (for instance methanol and methyl cyanide), implying that the existence of a correlation does not imply a chemical link. [abridged]
△ Less
Submitted 3 February, 2020;
originally announced February 2020.
-
Searching for kinematic evidence of Keplerian disks around Class 0 protostars with CALYPSO
Authors:
S. Maret,
A. J. Maury,
A. Belloche,
M. Gaudel,
Ph. André,
S. Cabrit,
C. Codella,
C. Lefèvre,
L. Podio,
S. Anderl,
F. Gueth,
P. Hennebelle
Abstract:
The formation of protoplanetary disks is not well understood. To understand how and when these disks are formed, it is crucial to characterize the kinematics of the youngest protostars at a high angular resolution. Here we study a sample of 16 Class 0 protostars to measure their rotation profile at scales from 50 to 500~au and search for Keplerian rotation. We used high-angular-resolution line obs…
▽ More
The formation of protoplanetary disks is not well understood. To understand how and when these disks are formed, it is crucial to characterize the kinematics of the youngest protostars at a high angular resolution. Here we study a sample of 16 Class 0 protostars to measure their rotation profile at scales from 50 to 500~au and search for Keplerian rotation. We used high-angular-resolution line observations obtained with the Plateau de Bure Interferometer as part of the CALYPSO large program. From $\mathrm{^{13}CO}$ ($J=2-1$), $\mathrm{C^{18}O}$ ($J=2-1$) and SO ($N_{j}=5_{6}-4_{5}$) moment maps, we find that seven sources show rotation about the jet axis at a few hundred au scales: SerpS-MM18, L1448-C, L1448-NB, L1527, NGC1333- IRAS2A, NGC1333-IRAS4B, and SVS13-B. We analyzed the kinematics of these sources in the $uv$ plane to derive the rotation profiles down to 50~au scales. We find evidence for Keplerian rotation in only two sources, L1527 and L1448-C. Overall, this suggests that Keplerian disks larger than 50 au are uncommon around Class 0 protostars. However, in some of the sources, the line emission could be optically thick and dominated by the envelope emission. Due to the optical thickness of these envelopes, some of the disks could have remained undetected in our observations.
△ Less
Submitted 17 January, 2020;
originally announced January 2020.
-
Debris disks around stars in the NIKA2 era
Authors:
J. -F. Lestrade,
J. -C. Augereau,
M. Booth,
R. Adam,
P. Ade,
P. Andre,
A. Andrianasolo,
H. Aussel,
A. Beelen,
A. Benoit,
A. Bideaud,
O. Bourrion,
M. Calvo,
A. Catalano,
B. Comis,
M. De Petris,
F. -X. Desert,
S. Doyle,
E. F. C. Driessen,
A. Gomez,
J. Goupy W. Holland,
F. Keruzore,
C. Kramer,
B. Ladjelate,
G. Lagache
, et al. (20 additional authors not shown)
Abstract:
The new NIKA2 camera at the IRAM 30m radiotelescope was used to observe three known debris disks in order to constrain the SED of their dust emission in the millimeter wavelength domain. We have found that the spectral index between the two NIKA2 bands (1mm and 2mm) is consistent with the Rayleigh-Jeans regime (lambda^{-2}), unlike the steeper spectra (lambda^{-3}) measured in the submillimeter-wa…
▽ More
The new NIKA2 camera at the IRAM 30m radiotelescope was used to observe three known debris disks in order to constrain the SED of their dust emission in the millimeter wavelength domain. We have found that the spectral index between the two NIKA2 bands (1mm and 2mm) is consistent with the Rayleigh-Jeans regime (lambda^{-2}), unlike the steeper spectra (lambda^{-3}) measured in the submillimeter-wavelength domain for two of the three disks $-$ around the stars Vega and HD107146. We provide a succesful proof of concept to model this spectral inversion in using two populations of dust grains, those smaller and those larger than a grain radius a0 of 0.5mm. This is obtained in breaking the slope of the size distribution and the functional form of the absorption coefficient of the standard model at a0. The third disk - around the star HR8799 - does not exhibit this spectral inversion but is also the youngest.
△ Less
Submitted 14 November, 2019;
originally announced November 2019.
-
Dust evolution in pre-stellar cores
Authors:
Charlène Lefèvre,
Laurent Pagani,
Bilal Ladjelate,
Michiel Min,
Hiroyuki Hirashita,
Robert Zylka
Abstract:
Dust grains are the building {blocks} of future planets. They evolve in size, shape and composition during the life cycle of the interstellar medium. We seek to understand the process which leads from diffuse medium grains to dust grains in the vicinity of protostars inside disks. As a first step, we propose to characterize the dust evolution inside pre-stellar cores thanks to multi-wavelength obs…
▽ More
Dust grains are the building {blocks} of future planets. They evolve in size, shape and composition during the life cycle of the interstellar medium. We seek to understand the process which leads from diffuse medium grains to dust grains in the vicinity of protostars inside disks. As a first step, we propose to characterize the dust evolution inside pre-stellar cores thanks to multi-wavelength observations. We will present how NIKA2 maps are crucial to better constrain dust properties and {we will} introduce SIGMA: a new flexible dust model in open access.
△ Less
Submitted 14 November, 2019; v1 submitted 8 November, 2019;
originally announced November 2019.
-
NOEMA complementarity with NIKA2
Authors:
Charlène Lefèvre,
Carsten Kramer,
Roberto Neri,
Stefano Berta,
Karl Schuster
Abstract:
IRAM operates two observatories - the 30-meter Telescope on Pico Veleta in Spain and NOEMA, an interferometer of ten 15-meter antennas on Plateau de Bure in France. Both observatories allow to observe at millimeter wavelengths. Here, we aim at discussing the complementary between continuum observations with NOEMA and NIKA2 at the 30m and their role at the cutting edge of research in astronomy. In…
▽ More
IRAM operates two observatories - the 30-meter Telescope on Pico Veleta in Spain and NOEMA, an interferometer of ten 15-meter antennas on Plateau de Bure in France. Both observatories allow to observe at millimeter wavelengths. Here, we aim at discussing the complementary between continuum observations with NOEMA and NIKA2 at the 30m and their role at the cutting edge of research in astronomy. In particular, we will review possible synergies of continuum studies from nearby star forming regions to high redshift galaxies at cosmological distances.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
Characterizing young protostellar disks with the CALYPSO IRAM-PdBI survey: large Class 0 disks are rare
Authors:
A. J. Maury,
Ph. André,
L. Testi,
S. Maret,
A. Belloche,
P. Hennebelle,
S. Cabrit,
C. Codella,
F. Gueth,
L. Podio,
S. Anderl,
A. Bacmann,
S. Bontemps,
M. Gaudel,
B. Ladjelate,
C. Lefèvre,
B. Tabone,
B. Lefloch
Abstract:
Understanding the formation mechanisms of protoplanetary disks and multiple systems, and their pristine properties, is a key question for modern astrophysics. The properties of the youngest disks, embedded in rotating infalling protostellar envelopes, have largely remained unconstrained up to now.
In the framework of the IRAM-PdBI CALYPSO survey, we have obtained sub-arcsecond observations of th…
▽ More
Understanding the formation mechanisms of protoplanetary disks and multiple systems, and their pristine properties, is a key question for modern astrophysics. The properties of the youngest disks, embedded in rotating infalling protostellar envelopes, have largely remained unconstrained up to now.
In the framework of the IRAM-PdBI CALYPSO survey, we have obtained sub-arcsecond observations of the dust continuum emission at 231 GHz and 94 GHz, for a sample of 16 solar-type Class 0 protostars. In an attempt to identify disk-like structures embedded at small scales in the protostellar envelopes, we model the dust continuum emission visibility profiles using both Plummer-like envelope models and envelope models including additional Gaussian disk-like components.
Our analysis shows that in the CALYPSO sample, 11 of the 16 Class 0 protostars are better reproduced by models including a disk-like dust continuum component contributing to the flux at small scales, but less than 25% of these candidate protostellar disks are resolved at radii > 60 au. Including all available literature constraints on Class 0 disks at subarcsecond scales, we show that our results are representative: most (> 72% in a sample of 26 protostars) Class 0 protostellar disks are small and emerge only at radii < 60 au. Our multiplicity fraction at scales 100-5000 au is in global agreement with the multiplicity properties of Class I protostars at similar scales.
We confront our observational constraints on the disk size distribution in Class 0 protostars to the typical disk properties from protostellar formation models. Because they reduce the centrifugal radius, and produce a disk size distribution peaking at radii <100 au during the main accretion phase, magnetized models of rotating protostellar collapse are favored by our observations.
△ Less
Submitted 12 November, 2018; v1 submitted 26 October, 2018;
originally announced October 2018.
-
CALYPSO view of SVS 13A with PdBI: Multiple jet sources
Authors:
Charlène Lefèvre,
Sylvie Cabrit,
Anaëlle J. Maury,
Frederic Gueth,
Benoît Tabone,
Linda Podio,
Arnaud Belloche,
Claudio Codella,
Sébastien Maret,
Sybille Anderl,
Philippe André,
Patrick Hennebelle
Abstract:
Aims. We wish to clarify the origin of the multiple jet features emanating from the binary protostar SVS 13A (= VLA4A/VLA4B). Methods. We used the Plateau de Bure Interferometer to map at 0.3-0.8" (~70-190 au) dust emission at 1.4 mm, CO(2-1), SiO(5-4), SO(65-54). Revised proper motions for VLA4A/4B and jet wiggling models are computed to clarify their respective contribution. Results. VLA4A shows…
▽ More
Aims. We wish to clarify the origin of the multiple jet features emanating from the binary protostar SVS 13A (= VLA4A/VLA4B). Methods. We used the Plateau de Bure Interferometer to map at 0.3-0.8" (~70-190 au) dust emission at 1.4 mm, CO(2-1), SiO(5-4), SO(65-54). Revised proper motions for VLA4A/4B and jet wiggling models are computed to clarify their respective contribution. Results. VLA4A shows compact dust emission suggestive of a disk < 50 au, and is the hot corino source, while CO/SiO/SO counterparts to the small-scale H2 jet originate from VLA4B and reveal the jet variable velocity structure. This jet exhibits ~ 3" wiggling consistent with orbital motion around a yet undetected ~ 20-30 au companion to VLA4B, or jet precession. Jet wiggling combined with velocity variability can explain the large apparent angular momentum in CO bullets. We also uncover a synchronicity between CO jet bullets and knots in the HH7-11 chain demonstrating that they trace two distinct jets. Their ~ 300 yr twin outburst period may be triggered by close perihelion approach of VLA4A in an eccentric orbit around VLA4B. A third jet is tentatively seen at PA ~ 0 degrees. Conclusions. SVS13 A harbors at least 2 and possibly 3 distinct jet sources. The CO and HH7-11 jets are launched from quasi-coplanar disks, separated by 20-70 au. Their synchronous major events every 300 yr favor external triggering by close binary interactions, a scenario also invoked for FU Or outbursts.
△ Less
Submitted 7 July, 2017;
originally announced July 2017.
-
An upper limit on the mass of the circumplanetary disk for DH Tau b
Authors:
Schuyler G. Wolff,
Francois Menard,
Claudio Caceres,
Charlene Lefevre,
Mickael Bonnefoy,
Hector Canovas,
Sebastien Maret,
Christophe Pinte,
Matthias R. Schreiber,
Gerrit van der Plas
Abstract:
DH Tau is a young ($\sim$1 Myr) classical T Tauri star. It is one of the few young PMS stars known to be associated with a planetary mass companion, DH Tau b, orbiting at large separation and detected by direct imaging. DH Tau b is thought to be accreting based on copious H$α$ emission and exhibits variable Paschen Beta emission. NOEMA observations at 230 GHz allow us to place constraints on the d…
▽ More
DH Tau is a young ($\sim$1 Myr) classical T Tauri star. It is one of the few young PMS stars known to be associated with a planetary mass companion, DH Tau b, orbiting at large separation and detected by direct imaging. DH Tau b is thought to be accreting based on copious H$α$ emission and exhibits variable Paschen Beta emission. NOEMA observations at 230 GHz allow us to place constraints on the disk dust mass for both DH Tau b and the primary in a regime where the disks will appear optically thin. We estimate a disk dust mass for the primary, DH Tau A of $17.2\pm1.7\,M_{\oplus}$, which gives a disk-to-star mass ratio of 0.014 (assuming the usual Gas-to-Dust mass ratio of 100 in the disk). We find a conservative disk dust mass upper limit of 0.42$M_{\oplus}$ for DH Tau b, assuming that the disk temperature is dominated by irradiation from DH Tau b itself. Given the environment of the circumplanetary disk, variable illumination from the primary or the equilibrium temperature of the surrounding cloud would lead to even lower disk mass estimates. A MCFOST radiative transfer model including heating of the circumplanetary disk by DH Tau b and DH Tau A suggests that a mass averaged disk temperature of 22 K is more realistic, resulting in a dust disk mass upper limit of 0.09$M_{\oplus}$ for DH Tau b. We place DH Tau b in context with similar objects and discuss the consequences for planet formation models.
△ Less
Submitted 23 May, 2017;
originally announced May 2017.
-
First image of the L1157 molecular jet by the CALYPSO IRAM-PdBI survey
Authors:
L. Podio,
C. Codella,
F. Gueth,
S. Cabrit,
A. Maury,
B. Tabone,
C. Lefèvre,
S. Anderl,
P. André,
A. Belloche,
S. Bontemps,
P. Hennebelle,
B. Lefloch,
S. Maret,
L. Testi
Abstract:
Fast jets are thought to be a crucial ingredient of star formation because they might extract angular momentum from the disk and thus allow mass accretion onto the star. However, it is unclear whether jets are ubiquitous, and likewise, their contribution to mass and angular momentum extraction during protostar formation remains an open question.
Our aim is to investigate the ejection process in…
▽ More
Fast jets are thought to be a crucial ingredient of star formation because they might extract angular momentum from the disk and thus allow mass accretion onto the star. However, it is unclear whether jets are ubiquitous, and likewise, their contribution to mass and angular momentum extraction during protostar formation remains an open question.
Our aim is to investigate the ejection process in the low-mass Class 0 protostar L1157. This source is associated with a spectacular bipolar outflow, and the recent detection of high-velocity SiO suggests the occurrence of a jet.
Observations of CO 2-1 and SiO 5-4 at 0.8" resolution were obtained with the IRAM Plateau de Bure Interferometer as part of the CALYPSO large program. The jet and outflow structure were fit with a precession model. We derived the column density of CO and SiO, as well as the jet mass-loss rate and mechanical luminosity.
High-velocity CO and SiO emission resolve for the first time the first 200 au of the outflow-driving molecular jet. The jet is strongly asymmetric, with the blue lobe 0.65 times slower than the red lobe. This suggests that the large-scale asymmetry of the outflow is directly linked to the jet velocity and that the asymmetry in the launching mechanism has been at work for the past 1800 yr. Velocity asymmetries are common in T Tauri stars, which suggests that the jet formation mechanism from Class 0 to Class II stages might be similar. Our model simultaneously fits the inner jet and the clumpy 0.2 pc scale outflow by assuming that the jet precesses counter-clockwise on a cone inclined by 73 degree to the line of sight with an opening angle of 8 degree on a period of 1640 yr. The estimated jet mass flux and mechanical luminosity are 7.7e-7 Msun/yr, and 0.9 Lsun, indicating that the jet could extract at least 25% of the gravitational energy released by the forming star.
△ Less
Submitted 17 August, 2016;
originally announced August 2016.
-
Room temperature polarization in the ferrimagnetic Ga2-xFexO3 ceramics
Authors:
B. Kundys,
F. Roulland,
C. Lefevre,
C. Meny,
A. Thomasson,
N. Viart
Abstract:
The effect of the Fe-Ga ratio on the magnetic and electric properties of the multiferroic Ga2-xFexO3 compound has been studied in order to determine the composition range exhibiting magnetic and electric orders coexistence and their critical temperatures. A magnetoelectric phase diagram, showing the evolution of both the Neel magnetic ordering temperature and the electric ordering temperature, ver…
▽ More
The effect of the Fe-Ga ratio on the magnetic and electric properties of the multiferroic Ga2-xFexO3 compound has been studied in order to determine the composition range exhibiting magnetic and electric orders coexistence and their critical temperatures. A magnetoelectric phase diagram, showing the evolution of both the Neel magnetic ordering temperature and the electric ordering temperature, versus the iron content has been established for x values between 0.9 and 1.4. While the ferrimagnetic Neel temperature increases with the iron content, the electric ordering temperature shows an opposite trend. The electric polarization has been found to exist far above room temperature for the x value of 1.1 composition which shows the highest observed electric ordering temperature of approx. 580K. The compounds with x values of 1.3 and 1.4 are ferrimagnetic-electric relaxors with both properties coexisting at room temperature.
△ Less
Submitted 14 July, 2016;
originally announced July 2016.
-
Environment-dependent swimming strategy of Magnetococcus marinus under magnetic field
Authors:
Nicolas Waisbord,
Christopher Lefèvre,
Lydéric Bocquet,
Christophe Ybert,
Cécile Cottin-Bizonne
Abstract:
Magnetotactic bacteria (MTB) are fascinating micro-organisms which possess embodied biomineralized nanomagnets providing them the ability to orient with the Earth's magnetic field. This property is presumably related to an evolutionary advantage in finding the oxic-anoxic interface along the up and down direction in aquatic environments. So far the magnetic field response by MTB, called magnetotax…
▽ More
Magnetotactic bacteria (MTB) are fascinating micro-organisms which possess embodied biomineralized nanomagnets providing them the ability to orient with the Earth's magnetic field. This property is presumably related to an evolutionary advantage in finding the oxic-anoxic interface along the up and down direction in aquatic environments. So far the magnetic field response by MTB, called magnetotaxis, has been well described by a paramagnetic model where bacteria orient passively along the field lines according to a purely physical mechanism where magnetic torque and orientational Brownian noise compete. Here we demonstrate using Magnetococcus marinus strain MC-1 as MTB model that magnetotaxis shows more complex behaviors, which are affected by environmental conditions of different types. Indeed while MC-1 swimmers are found to essentially obey the paramagnetic paradigm when swimming in their growth medium, they exhibit a run-and-tumble dynamics in a medium devoid of energy source. Tumbling events are found to provide isotropic reorientation capabilities causing the cells to escape from their prescribed field direction. This behavior has a major influence on the capabilities of the cells to explore their environment across field lines and represents an alternative search strategy to the back-and-forth motion along field-imposed tracks. Moreover, we show that aside chemical conditions, steric/geometrical constraints are also able to trigger tumbling events through obstacle encountering. Overall, physico-chemical environmental conditions appear to be important parameters involved in the swimming properties of MTB. Depending on environmental conditions, the run-and-tumble mobility may provide advantages in the search for nutrient or ecological niche, in complement to classical magnetotaxis.
△ Less
Submitted 1 March, 2016;
originally announced March 2016.
-
Destabilization of a flow focused suspension of magnetotactic bacteria
Authors:
Nicolas Waisbord,
Christopher Lefevre,
Lyderic Bocquet,
Christophe Ybert,
Cecile Cottin-Bizonne
Abstract:
Active matter is a new class of material, intrinsically out-of equilibrium with intriguing properties. So far, the recent upsurge of studies has mostly focused on the spontaneous behavior of these systems --in the absence of external constraints or driving--. Yet, many real life systems evolve under constraints, being both submitted to flow and various taxis. In the present work, we demonstrate a…
▽ More
Active matter is a new class of material, intrinsically out-of equilibrium with intriguing properties. So far, the recent upsurge of studies has mostly focused on the spontaneous behavior of these systems --in the absence of external constraints or driving--. Yet, many real life systems evolve under constraints, being both submitted to flow and various taxis. In the present work, we demonstrate a new experimental system which opens up the way for quantitative investigations, and discriminating examinations, of the challenging theoretical description of such systems. We explore the behavior of magnetotactic bacteria as a particularly rich and versatile class of driven matter, which behavior can be studied under contrasting and contradicting stimuli. In particular we demonstrate that the competing driving of an orienting magnetic field and hydrodynamic flow lead not only to jetting, but also unveils a new pearling instability. This illustrates new structuring capabilities of driven active matter.
△ Less
Submitted 9 February, 2016;
originally announced February 2016.
-
On the importance of scattering at 8 microns: Brighter than you think
Authors:
Charlène Lefèvre,
Laurent Pagani,
Michiel Min,
Charles Poteet,
Douglas Whittet
Abstract:
Context. Extinction and emission of dust models need for observational constraints to be validated. The coreshine phenomenon has already shown the importance of scattering in the 3 to 5 micron range and its ability to validate dust properties for dense cores. Aims. We want to investigate whether scattering can also play a role at longer wavelengths and to place even tighter constraints on the dust…
▽ More
Context. Extinction and emission of dust models need for observational constraints to be validated. The coreshine phenomenon has already shown the importance of scattering in the 3 to 5 micron range and its ability to validate dust properties for dense cores. Aims. We want to investigate whether scattering can also play a role at longer wavelengths and to place even tighter constraints on the dust properties. Methods. We analyze the inversion of the Spitzer 8 micron map of the dense molecular cloud L183, to examine the importance of scattering as a potential contributor to the line-of-sight extinction. Results. The column density deduced from the inversion of the 8 micron map, when we neglect scattering, disagrees with all the other column density measurements of the same region. Modeling confirms that scattering at 8 microns is not negligible with an intensity of several hundred kJy per sr. This demonstrates the need of efficiently scattering dust grains at MIR wavelengths up to 8 microns. Coagulated aggregates are good candidates and might also explain the discrepancy at high extinction between E(J-K) et tau(9.7) toward dense molecular clouds. Further investigation requires considering efficiently scattering dust grains including ices as realistic dust models.
△ Less
Submitted 16 December, 2015;
originally announced December 2015.
-
Galactic cold cores VI. Dust opacity spectral index
Authors:
M. Juvela,
K. Demyk,
Y. Doi,
A. Hughes,
C. Lefevre,
D. J. Marshall,
C. Meny,
J. Montillaud,
L. Pagani,
D. Paradis,
I. Ristorcelli,
J. Malinen,
L. A. Montier,
R. Paladini,
V. -M. Pelkonen,
A. Rivera-Ingraham
Abstract:
The Galactic Cold Cores project has made Herschel observations of 116 fields where the Planck survey has found signs of cold dust emission. The fields contain sources in different environments and different phases of star formation. The dust opacity spectral index beta and the dust colour temperature T are derived using Herschel and Planck data. The relation between beta and T is examined for the…
▽ More
The Galactic Cold Cores project has made Herschel observations of 116 fields where the Planck survey has found signs of cold dust emission. The fields contain sources in different environments and different phases of star formation. The dust opacity spectral index beta and the dust colour temperature T are derived using Herschel and Planck data. The relation between beta and T is examined for the whole sample and inside individual fields. Based on IRAS and Planck data, the fields are characterised by a median colour temperature of 16.1 K and a median opacity spectral index of beta=1.84. We observe a clear T-beta anti-correlation. In Herschel observations, constrained at lower resolution by Planck data, the variations follow the column density structure and beta(FIR) can rise to ~2.2 in individual clumps. The Planck 217 GHz band shows a systematic excess that is consistent with a general flattening of the dust emission spectrum at millimetre wavelengths. When fitted separately below and above 700 um, the median spectral index values are beta(FIR) ~ 1.91 and beta(mm) ~ 1.66. The spectral index changes as a function of column density and wavelength. Beta variations are partly masked by temperature gradients and the changes in the intrinsic grain properties may be even greater.
△ Less
Submitted 26 September, 2015;
originally announced September 2015.
-
Grain size limits derived from 3.6 μm and 4.5 μm coreshine
Authors:
J. Steinacker,
M. Andersen,
W. -F. Thi,
R. Paladini,
M. Juvela,
A. Bacmann,
V. -M. Pelkonen,
L. Pagani,
C. Lefèvre,
Th. Henning,
A. Noriega-Crespo
Abstract:
Recently discovered scattered light from molecular cloud cores in the wavelength range 3-5 μm (called "coreshine") seems to indicate the presence of grains with sizes above 0.5 μm. We aim to analyze 3.6 and 4.5 μm coreshine from molecular cloud cores to probe the largest grains in the size distribution. We analyzed dedicated deep Cycle 9 Spitzer IRAC observations in the 3.6 and 4.5 μm bands for a…
▽ More
Recently discovered scattered light from molecular cloud cores in the wavelength range 3-5 μm (called "coreshine") seems to indicate the presence of grains with sizes above 0.5 μm. We aim to analyze 3.6 and 4.5 μm coreshine from molecular cloud cores to probe the largest grains in the size distribution. We analyzed dedicated deep Cycle 9 Spitzer IRAC observations in the 3.6 and 4.5 μm bands for a sample of 10 low-mass cores. We used a new modeling approach based on a combination of ratios of the two background- and foreground-subtracted surface brightnesses and observed limits of the optical depth. The dust grains were modeled as ice-coated silicate and carbonaceous spheres. We discuss the impact of local radiation fields with a spectral slope differing from what is seen in the DIRBE allsky maps. For the cores L260, ecc806, L1262, L1517A, L1512, and L1544, the model reproduces the data with maximum grain sizes around 0.9, 0.5, 0.65, 1.5, 0.6, and > 1.5 μm, respectively. The maximum coreshine intensities of L1506C, L1439, and L1498 in the individual bands require smaller maximum grain sizes than derived from the observed distribution of band ratios. Additional isotropic local radiation fields with a spectral shape differing from the DIRBE map shape do not remove this discrepancy. In the case of Rho Oph 9, we were unable to reliably disentangle the coreshine emission from background variations and the strong local PAH emission. Considering surface brightness ratios in the 3.6 and 4.5 μm bands across a molecular cloud core is an effective method of disentangling the complex interplay of structure and opacities when used in combination with observed limits of the optical depth.
△ Less
Submitted 17 August, 2015;
originally announced August 2015.
-
Lambda = 3 mm line survey of nearby active galaxies
Authors:
Rebeca Aladro,
Sergio Martín,
Denise Riquelme,
Christian Henkel,
Rainer Mauersberger,
Jesús Martín-Pintado,
Axel Weiss,
Charlene Lefevre,
Carsten Kramer,
Miguel Angel Requena-Torres,
Jairo Armijos-Abendaño
Abstract:
We used the IRAM 30m telescope to observe the frequency range [86-116]GHz towards the central regions of the starburst galaxies M83, M82, and NGC253, the AGNs M51, NGC1068, and NGC7469, and the ULIRGs Arp220 and Mrk231. Assuming LTE conditions, we calculated the column densities of 27 molecules and 10 isotopologues. Among others, we report the first tentative detections of CH3CHO, HNCO, and NS in…
▽ More
We used the IRAM 30m telescope to observe the frequency range [86-116]GHz towards the central regions of the starburst galaxies M83, M82, and NGC253, the AGNs M51, NGC1068, and NGC7469, and the ULIRGs Arp220 and Mrk231. Assuming LTE conditions, we calculated the column densities of 27 molecules and 10 isotopologues. Among others, we report the first tentative detections of CH3CHO, HNCO, and NS in M82 and, for the first time in the extragalactic medium, HC5N in NGC253. Halpha recombination lines were only found in M82 and NGC253. Vibrationally excited lines of HC3N were only detected in Arp220. CH3CCH emission is only seen in the starburst-dominated galaxies. By comparison of the fractional abundances among the galaxies, we looked for the molecules that are best suited to characterise the chemistry of starbursts, AGNs and ULIRGs, as well as the differences among galaxies within the same group.
△ Less
Submitted 14 April, 2015;
originally announced April 2015.
-
ASPeRiX, a First Order Forward Chaining Approach for Answer Set Computing
Authors:
Claire Lefèvre,
Christopher Béatrix,
Igor Stéphan,
Laurent Garcia
Abstract:
The natural way to use Answer Set Programming (ASP) to represent knowledge in Artificial Intelligence or to solve a combinatorial problem is to elaborate a first order logic program with default negation. In a preliminary step this program with variables is translated in an equivalent propositional one by a first tool: the grounder. Then, the propositional program is given to a second tool: the so…
▽ More
The natural way to use Answer Set Programming (ASP) to represent knowledge in Artificial Intelligence or to solve a combinatorial problem is to elaborate a first order logic program with default negation. In a preliminary step this program with variables is translated in an equivalent propositional one by a first tool: the grounder. Then, the propositional program is given to a second tool: the solver. This last one computes (if they exist) one or many answer sets (stable models) of the program, each answer set encoding one solution of the initial problem. Until today, almost all ASP systems apply this two steps computation. In this article, the project ASPeRiX is presented as a first order forward chaining approach for Answer Set Computing. This project was amongst the first to introduce an approach of answer set computing that escapes the preliminary phase of rule instantiation by integrating it in the search process. The methodology applies a forward chaining of first order rules that are grounded on the fly by means of previously produced atoms. Theoretical foundations of the approach are presented, the main algorithms of the ASP solver ASPeRiX are detailed and some experiments and comparisons with existing systems are provided.
△ Less
Submitted 16 November, 2016; v1 submitted 26 March, 2015;
originally announced March 2015.
-
Galactic cold cores V. Dust opacity
Authors:
M. Juvela,
I. Ristorcelli,
D. J. Marshall,
J. Montillaud,
V. -M. Pelkonen,
N. Ysard,
P. McGehee,
R. Paladini,
L. Pagani,
J. Malinen,
A.,
Rivera-Ingraham,
C. Lefevre,
L. V. Toth,
L. A. Montier,
J. -P. Bernard,
P. Martin
Abstract:
The project Galactic Cold Cores has made Herschel observations of interstellar clouds where the Planck satellite survey has located cold and compact clumps. The sources range from starless clumps to protostellar cores. We examine 116 Herschel fields to estimate the submillimetre dust opacity and its variations. The submillimetre dust opacity was derived from Herschel data, and near-infrared observ…
▽ More
The project Galactic Cold Cores has made Herschel observations of interstellar clouds where the Planck satellite survey has located cold and compact clumps. The sources range from starless clumps to protostellar cores. We examine 116 Herschel fields to estimate the submillimetre dust opacity and its variations. The submillimetre dust opacity was derived from Herschel data, and near-infrared observations of the reddening of background stars are converted into near-infrared optical depth. We studied the systematic errors affecting these parameters and used modelling to correct for the expected biases. The ratio of 250um and J band opacities is correlated with the cloud location and star formation activity. We find a median ratio of tau(250um)/tau(J)= (1.6+-0.2)*10^-3, which is more than three times the mean value in diffuse medium. Assuming a spectral index beta=1.8 instead of beta=2.0, the value would be lower by ~30%. No significant systematic variation is detected with Galactocentric distance or with Galactic height. The tau(250um)/tau(J) maps reveal six fields with clear increase of submillimetre opacity of up to tau(250um)/tau(J) ~ 4*10^-3. These are all nearby fields with spatially resolved clumps of high column density. We interpret the increase in the far-infrared opacity as a sign of grain growth in the densest and coldest regions of interstellar clouds.
△ Less
Submitted 28 January, 2015;
originally announced January 2015.
-
Can we trace very cold dust from its emission alone ?
Authors:
Laurent Pagani,
Charlène Lefèvre,
Mika Juvela,
Veli-Matti Pelkonen,
Frédéric Schuller
Abstract:
Context. Dust is a good tracer of cold dark clouds but its column density is difficult to quantify. Aims. We want to check whether the far-infrared and submillimeter high-resolution data from Herschel SPIRE and PACS cameras combined with ground-based telescope bolometers allow us to retrieve the whole dust content of cold dark clouds. Methods. We compare far-infrared and submillimeter emission acr…
▽ More
Context. Dust is a good tracer of cold dark clouds but its column density is difficult to quantify. Aims. We want to check whether the far-infrared and submillimeter high-resolution data from Herschel SPIRE and PACS cameras combined with ground-based telescope bolometers allow us to retrieve the whole dust content of cold dark clouds. Methods. We compare far-infrared and submillimeter emission across L183 to the 8 $μ$m absorption map from Spitzer data and fit modified blackbody functions towards three different positions. Results. We find that none of the Herschel SPIRE channels follow the cold dust profile seen in absorption. Even the ground-based submillimeter telescope observations, although more closely following the absorption profile, cannot help to characterize the cold dust without external information such as the dust column density itself. The difference in dust opacity can reach up to a factor of 3 in prestellar cores of high extinction. Conclusions. In dark clouds, the amount of very cold dust cannot be measured from its emission alone. In particular, studies of dark clouds based only on Herschel data can miss a large fraction of the dust content. This has an impact on core and filament density profiles, masse and stability estimates.
△ Less
Submitted 5 January, 2015;
originally announced January 2015.
-
Dust properties inside molecular clouds from coreshine modeling and observations
Authors:
Charlène Lefèvre,
Laurent Pagani,
Mika Juvela,
Roberta Paladini,
Rosine Lallement,
D. J. Marshall,
Morten Andersen,
Aurore Bacmann,
Peregrine M. McGehee,
Ludovic Montier,
Alberto Noriega-Crespo,
V. -M. Pelkonen,
Isabelle Ristorcelli,
Jürgen Steinacker
Abstract:
Context. Using observations to deduce dust properties, grain size distribution, and physical conditions in molecular clouds is a highly degenerate problem. Aims. The coreshine phenomenon, a scattering process at 3.6 and 4.5 $μ$m that dominates absorption, has revealed its ability to explore the densest parts of clouds. We want to use this effect to constrain the dust parameters. The goal is to inv…
▽ More
Context. Using observations to deduce dust properties, grain size distribution, and physical conditions in molecular clouds is a highly degenerate problem. Aims. The coreshine phenomenon, a scattering process at 3.6 and 4.5 $μ$m that dominates absorption, has revealed its ability to explore the densest parts of clouds. We want to use this effect to constrain the dust parameters. The goal is to investigate to what extent grain growth (at constant dust mass) inside molecular clouds is able to explain the coreshine observations. We aim to find dust models that can explain a sample of Spitzer coreshine data. We also look at the consistency with near-infrared data we obtained for a few clouds. Methods. We selected four regions with a very high occurrence of coreshine cases: Taurus-Perseus, Cepheus, Chameleon and L183/L134. We built a grid of dust models and investigated the key parameters to reproduce the general trend of surface bright- nesses and intensity ratios of both coreshine and near-infrared observations with the help of a 3D Monte-Carlo radiative transfer code. The grid parameters allow to investigate the effect of coagulation upon spherical grains up to 5 $μ$m in size derived from the DustEm diffuse interstellar medium grains. Fluffiness (porosity or fractal degree), ices, and a handful of classical grain size distributions were also tested. We used the near- and mostly mid-infrared intensity ratios as strong discriminants between dust models. Results. The determination of the background field intensity at each wavelength is a key issue. In particular, an especially strong background field explains why we do not see coreshine in the Galactic plane at 3.6 and 4.5 $μ$m. For starless cores, where detected, the observed 4.5 $μ$m / 3.6 $μ$m coreshine intensity ratio is always lower than $\sim$0.5 which is also what we find in the models for the Taurus-Perseus and L183 directions. Embedded sources can lead to higher fluxes (up to four times greater than the strongest starless core fluxes) and higher coreshine ratios (from 0.5 to 1.1 in our selected sample). Normal interstellar radiation field conditions are sufficient to find suitable grain models at all wavelengths for starless cores. The standard interstellar grains are not able to reproduce observations and, due to the multi-wavelength approach, only a few grain types meet the criteria set by the data. Porosity does not affect the flux ratios while the fractal dimension helps to explain coreshine ratios but does not seem able to reproduce near-infrared observations without a mix of other grain types. Conclusions. Combined near- and mid-infrared wavelengths confirm the potential to reveal the nature and size distribution of dust grains. Careful assessment of the environmental parameters (interstellar and background fields, embedded or nearby reddened sources) is required to validate this new diagnostic.
△ Less
Submitted 22 July, 2014;
originally announced July 2014.
-
Stein's method and stochastic orderings
Authors:
Fraser Daly,
Claude Lefèvre,
Sergey Utev
Abstract:
A stochastic ordering approach is applied with Stein's method for approximation by the equilibrium distribution of a birth-death process. The usual stochastic order and the more general s-convex orders are discussed. Attention is focused on Poisson and translated Poisson approximation of a sum of dependent Bernoulli random variables, for example k-runs in i.i.d. Bernoulli trials. Other applicati…
▽ More
A stochastic ordering approach is applied with Stein's method for approximation by the equilibrium distribution of a birth-death process. The usual stochastic order and the more general s-convex orders are discussed. Attention is focused on Poisson and translated Poisson approximation of a sum of dependent Bernoulli random variables, for example k-runs in i.i.d. Bernoulli trials. Other applications include approximation by polynomial birth--death distributions.
△ Less
Submitted 8 December, 2009;
originally announced December 2009.
-
Filtering Microarray Correlations by Statistical Literature Analysis Yields Potential Hypotheses for Lactation Research
Authors:
Maurice HT Ling,
Christophe Lefevre,
Kevin R. Nicholas
Abstract:
Our results demonstrated that a previously reported protein name co-occurrence method (5-mention PubGene) which was not based on a hypothesis testing framework, it is generally statistically more significant than the 99th percentile of Poisson distribution-based method of calculating co-occurrence. It agrees with previous methods using natural language processing to extract protein-protein inter…
▽ More
Our results demonstrated that a previously reported protein name co-occurrence method (5-mention PubGene) which was not based on a hypothesis testing framework, it is generally statistically more significant than the 99th percentile of Poisson distribution-based method of calculating co-occurrence. It agrees with previous methods using natural language processing to extract protein-protein interaction from text as more than 96% of the interactions found by natural language processing methods to overlap with the results from 5-mention PubGene method. However, less than 2% of the gene co-expressions analyzed by microarray were found from direct co-occurrence or interaction information extraction from the literature. At the same time, combining microarray and literature analyses, we derive a novel set of 7 potential functional protein-protein interactions that had not been previously described in the literature.
△ Less
Submitted 1 January, 2009;
originally announced January 2009.
-
Parts-of-Speech Tagger Errors Do Not Necessarily Degrade Accuracy in Extracting Information from Biomedical Text
Authors:
Maurice HT Ling,
Christophe Lefevre,
Kevin R. Nicholas
Abstract:
A recent study reported development of Muscorian, a generic text processing tool for extracting protein-protein interactions from text that achieved comparable performance to biomedical-specific text processing tools. This result was unexpected since potential errors from a series of text analysis processes is likely to adversely affect the outcome of the entire process. Most biomedical entity r…
▽ More
A recent study reported development of Muscorian, a generic text processing tool for extracting protein-protein interactions from text that achieved comparable performance to biomedical-specific text processing tools. This result was unexpected since potential errors from a series of text analysis processes is likely to adversely affect the outcome of the entire process. Most biomedical entity relationship extraction tools have used biomedical-specific parts-of-speech (POS) tagger as errors in POS tagging and are likely to affect subsequent semantic analysis of the text, such as shallow parsing. This study aims to evaluate the parts-of-speech (POS) tagging accuracy and attempts to explore whether a comparable performance is obtained when a generic POS tagger, MontyTagger, was used in place of MedPost, a tagger trained in biomedical text. Our results demonstrated that MontyTagger, Muscorian's POS tagger, has a POS tagging accuracy of 83.1% when tested on biomedical text. Replacing MontyTagger with MedPost did not result in a significant improvement in entity relationship extraction from text; precision of 55.6% from MontyTagger versus 56.8% from MedPost on directional relationships and 86.1% from MontyTagger compared to 81.8% from MedPost on nondirectional relationships. This is unexpected as the potential for poor POS tagging by MontyTagger is likely to affect the outcome of the information extraction. An analysis of POS tagging errors demonstrated that 78.5% of tagging errors are being compensated by shallow parsing. Thus, despite 83.1% tagging accuracy, MontyTagger has a functional tagging accuracy of 94.6%.
△ Less
Submitted 2 April, 2008;
originally announced April 2008.