-
A small footprint travelling-wave parametric amplifier with a high Signal-to-Noise Ratio improvement in a wide band
Authors:
Hampus Renberg Nilsson,
Liangyu Chen,
Giovanna Tancredi,
Robert Rehammar,
Daryoush Shiri,
Filip Nilsson,
Amr Osman,
Vitaly Shumeiko,
Per Delsing
Abstract:
We characterise a small footprint travelling-wave parametric amplifier (TWPA). The TWPA is built with magnetically flux-tunable superconducting nonlinear asymmetric inductive elements (SNAILs) and parallel-plate capacitors. It implements three-wave mixing (3WM) with resonant phase matching (RPM), a small cutoff frequency for high gain per unitcell and impedance matching networks for large bandwidt…
▽ More
We characterise a small footprint travelling-wave parametric amplifier (TWPA). The TWPA is built with magnetically flux-tunable superconducting nonlinear asymmetric inductive elements (SNAILs) and parallel-plate capacitors. It implements three-wave mixing (3WM) with resonant phase matching (RPM), a small cutoff frequency for high gain per unitcell and impedance matching networks for large bandwidth impedance matching. The device has 200 unitcells and a physical footprint of only 1.1 mm^2, yet demonstrates an average parametric gain of 19 dB over a 3 GHz bandwidth, an average effective signal-to-noise ratio improvement of 10 dB and a clear speedup of qubit readout time.
△ Less
Submitted 29 August, 2024;
originally announced August 2024.
-
Dispersive Qubit Readout with Intrinsic Resonator Reset
Authors:
M. Jerger,
F. Motzoi,
Y. Gao,
C. Dickel,
L. Buchmann,
A. Bengtsson,
G. Tancredi,
C. W. Warren,
J. Bylander,
D. DiVincenzo,
R. Barends,
P. A. Bushev
Abstract:
A key challenge in quantum computing is speeding up measurement and initialization. Here, we experimentally demonstrate a dispersive measurement method for superconducting qubits that simultaneously measures the qubit and returns the readout resonator to its initial state. The approach is based on universal analytical pulses and requires knowledge of the qubit and resonator parameters, but needs n…
▽ More
A key challenge in quantum computing is speeding up measurement and initialization. Here, we experimentally demonstrate a dispersive measurement method for superconducting qubits that simultaneously measures the qubit and returns the readout resonator to its initial state. The approach is based on universal analytical pulses and requires knowledge of the qubit and resonator parameters, but needs no direct optimization of the pulse shape, even when accounting for the nonlinearity of the system. Moreover, the method generalizes to measuring an arbitrary number of modes and states. For the qubit readout, we can drive the resonator to $\sim 10^2$ photons and back to $\sim 10^{-3}$ photons in less than $3 κ^{-1}$, while still achieving a $T_1$-limited assignment error below 1\%. We also present universal pulse shapes and experimental results for qutrit readout.
△ Less
Submitted 10 June, 2024; v1 submitted 7 June, 2024;
originally announced June 2024.
-
Macro-scale roughness reveals the complex history of asteroids Didymos and Dimorphos
Authors:
Jean-Baptiste Vincent,
Erik Asphaug,
Olivier Barnouin,
Joel Beccarelli,
Paula G. Benavidez,
Adriano Campo-Bagatin,
Nancy L. Chabot,
Carolyn M. Ernst,
Pedro H. Hasselmann,
Masatoshi Hirabayashi,
Simone Ieva,
Ozgur Karatekin,
Tomas Kasparek,
Tomas Kohout,
Zhong-Yi Lin,
Alice Lucchetti,
Patrick Michel,
Naomi Murdoch,
Maurizio Pajola,
Laura M. Parro,
Sabina D. Raducan,
Jessica Sunshine,
Gonzalo Tancredi,
Josep M. Trigo-Rodriguez,
Angelo Zinzi
Abstract:
Morphological mapping is a fundamental step in studying the processes that shaped an asteroid surface. Yet, it is challenging and often requires multiple independent assessments by trained experts. Here, we present fast methods to detect and characterize meaningful terrains from the topographic roughness: entropy of information, and local mean surface orientation. We apply our techniques to Didymo…
▽ More
Morphological mapping is a fundamental step in studying the processes that shaped an asteroid surface. Yet, it is challenging and often requires multiple independent assessments by trained experts. Here, we present fast methods to detect and characterize meaningful terrains from the topographic roughness: entropy of information, and local mean surface orientation. We apply our techniques to Didymos and Dimorphos, the target asteroids of NASA's DART mission: first attempt to deflect an asteroid. Our methods reliably identify morphological units at multiple scales. The comparative study reveals various terrain types, signatures of processes that transformed Didymos and Dimorphos. Didymos shows the most heterogeneity and morphology that indicate recent resurfacing events. Dimorphos is comparatively rougher than Didymos, which may result from the formation process of the binary pair and past interaction between the two bodies. Our methods can be readily applied to other bodies and data sets.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
Comparing the dynamics of Jupiter-family Comets and comet-like fireballs
Authors:
P. M. Shober,
G. Tancredi,
J. Vaubaillon,
H. A. R. Devillepoix,
S. Deam,
S. Anghel,
E. K. Sansom,
F. Colas,
S. Martino
Abstract:
Context. Jupiter-family comets (JFCs), which originate from the Kuiper belt and scattered disk, exhibit low-inclination and chaotic trajectories due to close encounters with Jupiter. Despite their typically short incursions into the inner solar system, a notable number of them are on Earth-crossing orbits, with fireball networks detecting many objects on ``JFC-like'' (2 < TJ < 3) orbits. Aims. Thi…
▽ More
Context. Jupiter-family comets (JFCs), which originate from the Kuiper belt and scattered disk, exhibit low-inclination and chaotic trajectories due to close encounters with Jupiter. Despite their typically short incursions into the inner solar system, a notable number of them are on Earth-crossing orbits, with fireball networks detecting many objects on ``JFC-like'' (2 < TJ < 3) orbits. Aims. This investigation aims to examine the orbital dynamics of JFCs and comet-like fireballs over 10,000 yr timescales, focusing on the trajectories and stability of these objects in the context of gravitational interactions within the solar system. Methods. We employed an extensive fireball dataset from the Desert Fireball Network (DFN), European Fireball Network (EFN), Fireball Recovery and InterPlanetary Observation Network (FRIPON), and Meteorite Observation and Recovery Project (MORP), alongside telescopically observed cometary ephemeris from the NASA HORIZONS database. The study integrates 646 fireball orbits with 661 JFC orbits for a comparative analysis of their orbital stability and evolution. Results. The analysis confirms frequent Jupiter encounters among most JFCs, inducing chaotic orbital behavior with limited predictability and short Lyapunov lifetimes (about 120 years), underscoring Jupiter`s significant dynamical influence. In contrast, ``JFC-like'' meteoroids detected by fireball networks largely exhibit dynamics divergent from genuine JFCs, with 79-92% on ``JFC-like'' orbits shown not to be prone to frequent Jupiter encounters; in particular, only 1-5% of all fireballs detected by the four networks exhibit dynamics similar to that of actual JFCs. In addition, 22% (16 of 72) of near-Earth JFCs are on highly stable orbits, suggesting a potential main belt origin for some of the bodies.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Signal crosstalk in a flip-chip quantum processor
Authors:
Sandoko Kosen,
Hang-Xi Li,
Marcus Rommel,
Robert Rehammar,
Marco Caputo,
Leif Grönberg,
Jorge Fernández-Pendás,
Anton Frisk Kockum,
Janka Biznárová,
Liangyu Chen,
Christian Križan,
Andreas Nylander,
Amr Osman,
Anita Fadavi Roudsari,
Daryoush Shiri,
Giovanna Tancredi,
Joonas Govenius,
Jonas Bylander
Abstract:
Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk…
▽ More
Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk performance competitive with those reported in other platforms. For capacitively coupled qubit-drive lines, we find on-resonant crosstalk better than -27 dB (average -37 dB). For inductively coupled magnetic-flux-drive lines, we find less than 0.13 % direct-current flux crosstalk (average 0.05 %). These observed crosstalk levels are adequately small and indicate a decreasing trend with increasing distance, which is promising for further scaling up to larger numbers of qubits. We discuss the implication of our results for the design of a low-crosstalk, on-chip signal delivery architecture, including the influence of a shielding tunnel structure, potential sources of crosstalk, and estimation of crosstalk-induced qubit-gate error in scaled-up quantum processors.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
On the fate of slow boulders ejected after DART impact on Dimorphos
Authors:
Fernando Moreno,
Gonzalo Tancredi,
Adriano Campo Bagatin
Abstract:
On 2022 September 26th, 23:14 UT the NASA/DART (Double Asteroid Redirection Test) spacecraft successfully impacted Dimorphos, the secondary component of the binary (65803) Didymos system, demonstrating asteroid orbit deflection for the first time. A large amount of debris, consisting on a wide size frequency distribution of particulates (from micron-sized dust to meter-sized boulders), was release…
▽ More
On 2022 September 26th, 23:14 UT the NASA/DART (Double Asteroid Redirection Test) spacecraft successfully impacted Dimorphos, the secondary component of the binary (65803) Didymos system, demonstrating asteroid orbit deflection for the first time. A large amount of debris, consisting on a wide size frequency distribution of particulates (from micron-sized dust to meter-sized boulders), was released, and a long-lasting tail has been observed over more than 9 months since impact. An important fraction of the ejecta mass has been ejected as individual meter-sized boulders, as have been found in images obtained by the Light Italian CubeSat for Imaging of Asteroid (LICIACube), as well as from the Hubble Space Telescope (HST). While the boulders observed by LICIACube had projected speeds of several tens of meter per second, those seen by the HST were about one hundred time slower. In this paper we analyze the long-term orbital evolution of those slow boulders using different dynamical codes, providing constraints on the fate of such large particles, and giving insight on the possibility of observing some of those boulders that might remain in orbit at the time of the ESA/Hera mission arrival to the binary system in late 2026.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Ejecta Evolution Following a Planned Impact into an Asteroid: The First Five Weeks
Authors:
Theodore Kareta,
Cristina Thomas,
Jian-Yang Li,
Matthew M. Knight,
Nicholas Moskovitz,
Agata Rozek,
Michele T. Bannister,
Simone Ieva,
Colin Snodgrass,
Petr Pravec,
Eileen V. Ryan,
William H. Ryan,
Eugene G. Fahnestock,
Andrew S. Rivkin,
Nancy Chabot,
Alan Fitzsimmons,
David Osip,
Tim Lister,
Gal Sarid,
Masatoshi Hirabayashi,
Tony Farnham,
Gonzalo Tancredi,
Patrick Michel,
Richard Wainscoat,
Rob Weryk
, et al. (63 additional authors not shown)
Abstract:
The impact of the DART spacecraft into Dimorphos, moon of the asteroid Didymos, changed Dimorphos' orbit substantially, largely from the ejection of material. We present results from twelve Earth-based facilities involved in a world-wide campaign to monitor the brightness and morphology of the ejecta in the first 35 days after impact. After an initial brightening of ~1.4 magnitudes, we find consis…
▽ More
The impact of the DART spacecraft into Dimorphos, moon of the asteroid Didymos, changed Dimorphos' orbit substantially, largely from the ejection of material. We present results from twelve Earth-based facilities involved in a world-wide campaign to monitor the brightness and morphology of the ejecta in the first 35 days after impact. After an initial brightening of ~1.4 magnitudes, we find consistent dimming rates of 0.11-0.12 magnitudes/day in the first week, and 0.08-0.09 magnitudes/day over the entire study period. The system returned to its pre-impact brightness 24.3-25.3 days after impact through the primary ejecta tail remained. The dimming paused briefly eight days after impact, near in time to the appearance of the second tail. This was likely due to a secondary release of material after re-impact of a boulder released in the initial impact, through movement of the primary ejecta through the aperture likely played a role.
△ Less
Submitted 18 October, 2023;
originally announced October 2023.
-
Characterization of the ejecta from NASA/DART impact on Dimorphos: observations and Monte Carlo models
Authors:
Fernando Moreno,
Adriano Campo Bagatin,
Gonzalo Tancredi,
Jian-Yang Li,
Alessandro Rossi,
Fabio Ferrari,
Masatoshi Hirabayashi,
Eugene Fahnestock,
Alain Maury,
Robert Sandness,
Andrew S. Rivkin,
Andy Cheng,
Tony L. Farnham,
Stefania Soldini,
Carmine Giordano,
Gianmario Merisio,
Paolo Panicucci,
Mattia Pugliatti,
Alberto J. Castro-Tirado,
Emilio Fernandez-Garcia,
Ignacio Perez-Garcia,
Stavro Ivanovski,
Antti Penttila,
Ludmilla Kolokolova,
Javier Licandro
, et al. (4 additional authors not shown)
Abstract:
The NASA/DART (Double Asteroid Redirection Test) spacecraft successfully crashed on Dimorphos, the secondary component of the binary (65803) Didymos system. Following the impact, a large dust cloud was released, and a long-lasting dust tail was developed. We have extensively monitored the dust tail from the ground and from the Hubble Space Telescope (HST). We provide a characterization of the ejec…
▽ More
The NASA/DART (Double Asteroid Redirection Test) spacecraft successfully crashed on Dimorphos, the secondary component of the binary (65803) Didymos system. Following the impact, a large dust cloud was released, and a long-lasting dust tail was developed. We have extensively monitored the dust tail from the ground and from the Hubble Space Telescope (HST). We provide a characterization of the ejecta dust properties, i.e., particle size distribution and ejection speeds, ejection geometric parameters, and mass, by combining both observational data sets, and by using Monte Carlo models of the observed dust tail. The differential size distribution function that best fits the imaging data was a broken power-law, having a power index of --2.5 for particles of r$\le$ 3 mm, and of --3.7 for larger particles. The particles range in sizes from 1 $μ$m up to 5 cm. The ejecta is characterized by two components, depending on velocity and ejection direction. The northern component of the double tail, observed since October 8th 2022, might be associated to a secondary ejection event from impacting debris on Didymos, although it is also possible that this feature results from the binary system dynamics alone. The lower limit to the total dust mass ejected is estimated at $\sim$6$\times$10$^6$ kg, half of this mass being ejected to interplanetary space.
△ Less
Submitted 19 July, 2023;
originally announced July 2023.
-
Experimentally verified, fast analytic and numerical design of superconducting resonators in flip-chip architectures
Authors:
Hang-Xi Li,
Daryoush Shiri,
Sandoko Kosen,
Marcus Rommel,
Lert Chayanun,
Andreas Nylander,
Robert Rehammar,
Giovanna Tancredi,
Marco Caputo,
Kestutis Grigoras,
Leif Grönberg,
Joonas Govenius,
Jonas Bylander
Abstract:
In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to p…
▽ More
In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to predict a resonator's parameters directly from its 2D cross-section, without computationally heavy and time-consuming 3D simulation. We demonstrate the method's validity by comparing the calculated resonator frequency and coupling quality factor with those obtained through 3D finite-element-method simulation and by measurement of 15 resonators in a flip-chip-integrated architecture. We achieve a discrepancy of less than 2% between designed and measured frequencies, for 6-GHz resonators. We also propose a design method that reduces the sensitivity of the resonant frequency to variations in the inter-chip spacing.
△ Less
Submitted 30 August, 2023; v1 submitted 9 May, 2023;
originally announced May 2023.
-
Mitigation of frequency collisions in superconducting quantum processors
Authors:
Amr Osman,
Jorge Fernàndez-Pendàs,
Christopher Warren,
Sandoko Kosen,
Marco Scigliuzzo,
Anton Frisk Kockum,
Giovanna Tancredi,
Anita Fadavi Roudsari,
Jonas Bylander
Abstract:
The reproducibility of qubit parameters is a challenge for scaling up superconducting quantum processors. Signal crosstalk imposes constraints on the frequency separation between neighboring qubits. The frequency uncertainty of transmon qubits arising from the fabrication process is attributed to deviations in the Josephson junction area, tunnel barrier thickness, and the qubit capacitor. We decre…
▽ More
The reproducibility of qubit parameters is a challenge for scaling up superconducting quantum processors. Signal crosstalk imposes constraints on the frequency separation between neighboring qubits. The frequency uncertainty of transmon qubits arising from the fabrication process is attributed to deviations in the Josephson junction area, tunnel barrier thickness, and the qubit capacitor. We decrease the sensitivity to these variations by fabricating larger Josephson junctions and reduce the wafer-level standard deviation in resistance down to 2%. We characterize 32 identical transmon qubits and demonstrate the reproducibility of the qubit frequencies with a 40 MHz standard deviation (i.e. 1%) with qubit quality factors exceeding 2 million. We perform two-level-system (TLS) spectroscopy and observe no significant increase in the number of TLSs causing qubit relaxation. We further show by simulation that for our parametric-gate architecture, and accounting only for errors caused by the uncertainty of the qubit frequency, we can scale up to 100 qubits with an average of only 3 collisions between quantum-gate transition frequencies, assuming 2% crosstalk and 99.9% target gate fidelity.
△ Less
Submitted 10 March, 2023; v1 submitted 8 March, 2023;
originally announced March 2023.
-
Ejecta from the DART-produced active asteroid Dimorphos
Authors:
Jian-Yang Li,
Masatoshi Hirabayashi,
Tony L. Farnham,
Jessica M. Sunshine,
Matthew M. Knight,
Gonzalo Tancredi,
Fernando Moreno,
Brian Murphy,
Cyrielle Opitom,
Steve Chesley,
Daniel J. Scheeres,
Cristina A. Thomas,
Eugene G. Fahnestock,
Andrew F. Cheng,
Linda Dressel,
Carolyn M. Ernst,
Fabio Ferrari,
Alan Fitzsimmons,
Simone Ieva,
Stavro L. Ivanovski,
Teddy Kareta,
Ludmilla Kolokolova,
Tim Lister,
Sabina D. Raducan,
Andrew S. Rivkin
, et al. (39 additional authors not shown)
Abstract:
Some active asteroids have been proposed to be the result of impact events. Because active asteroids are generally discovered serendipitously only after their tail formation, the process of the impact ejecta evolving into a tail has never been directly observed. NASA's Double Asteroid Redirection Test (DART) mission, apart from having successfully changed the orbital period of Dimorphos, demonstra…
▽ More
Some active asteroids have been proposed to be the result of impact events. Because active asteroids are generally discovered serendipitously only after their tail formation, the process of the impact ejecta evolving into a tail has never been directly observed. NASA's Double Asteroid Redirection Test (DART) mission, apart from having successfully changed the orbital period of Dimorphos, demonstrated the activation process of an asteroid from an impact under precisely known impact conditions. Here we report the observations of the DART impact ejecta with the Hubble Space Telescope (HST) from impact time T+15 minutes to T+18.5 days at spatial resolutions of ~2.1 km per pixel. Our observations reveal a complex evolution of ejecta, which is first dominated by the gravitational interaction between the Didymos binary system and the ejected dust and later by solar radiation pressure. The lowest-speed ejecta dispersed via a sustained tail that displayed a consistent morphology with previously observed asteroid tails thought to be produced by impact. The ejecta evolution following DART's controlled impact experiment thus provides a framework for understanding the fundamental mechanisms acting on asteroids disrupted by natural impact.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Three-wave mixing traveling-wave parametric amplifier with periodic variation of the circuit parameters
Authors:
Anita Fadavi Roudsari,
Daryoush Shiri,
Hampus Renberg Nilsson,
Giovanna Tancredi,
Amr Osman,
Ida-Maria Svensson,
Marina Kudra,
Marcus Rommel,
Jonas Bylander,
Vitaly Shumeiko,
Per Delsing
Abstract:
We report the implementation of a near-quantum-limited, traveling-wave parametric amplifier that uses three-wave mixing (3WM). To favor amplification by 3WM, we use the superconducting nonlinear asymmetric inductive element (SNAIL) loops, biased with a dc magnetic flux. In addition, we equip the device with dispersion engineering features to create a stop-band at the second harmonic of the pump an…
▽ More
We report the implementation of a near-quantum-limited, traveling-wave parametric amplifier that uses three-wave mixing (3WM). To favor amplification by 3WM, we use the superconducting nonlinear asymmetric inductive element (SNAIL) loops, biased with a dc magnetic flux. In addition, we equip the device with dispersion engineering features to create a stop-band at the second harmonic of the pump and suppress the propagation of the higher harmonics that otherwise degrade the amplification. With a chain of 440 SNAILs, the amplifier provides up to 20 dB gain and a 3-dB bandwidth of 1 GHz. The added noise by the amplifier is found to be less than one photon.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
Lofting of low speed ejecta produced in the DART experiment and production of a dust cloud
Authors:
Gonzalo Tancredi,
Po-Yen Liu,
Adriano Campo-Bagatin,
Fernando Moreno,
Bruno Domínguez
Abstract:
NASA sent the DART (Double Asteroid Redirection Test) mission to impact Dimorphos, the satellite of the asteroid binary system (65803) Didymos. DART will release LICIACube prior to impact to obtain high-resolution post-impact images. The impact will produce a crater and a large amount of material ejected at high speed (several tens of m/s), producing an ejecta cone that will quickly disperse. We a…
▽ More
NASA sent the DART (Double Asteroid Redirection Test) mission to impact Dimorphos, the satellite of the asteroid binary system (65803) Didymos. DART will release LICIACube prior to impact to obtain high-resolution post-impact images. The impact will produce a crater and a large amount of material ejected at high speed (several tens of m/s), producing an ejecta cone that will quickly disperse. We analyzed an additional effect: the lofting of material at low velocity due to the generation of seismic waves that propagate inside Dimorphos, producing surface shaking far from the impact point. We divide the process into different stages: from the generation of impact-induced waves, the interaction of them with surface particles, the ejection of dust particles at velocities, and the prediction of the observability of the dust coma and trail. We anticipate the following observable effects: i) generation of a dust cloud that will produce a hazy appearance of Dimorphos' surface, detectable by LICIACube; ii) brightness increase of the binary system due to enhancement of the cross section produced by the dust cloud; iii) generation of a dust trail, similar to those observed in some Active Asteroids, which can last for several weeks after impact. Numerical prediction of the detectability of these effects depends on the amount and size distribution of ejected particles, which are largely unknown. In case these effects are observable, an inversion method can be applied to compute the amount of ejected material and its velocity distribution, and discuss the relevance of the shaking process.
△ Less
Submitted 6 September, 2022;
originally announced September 2022.
-
Transmon qubit readout fidelity at the threshold for quantum error correction without a quantum-limited amplifier
Authors:
Liangyu Chen,
Hang-Xi Li,
Yong Lu,
Christopher W. Warren,
Christian J. Križan,
Sandoko Kosen,
Marcus Rommel,
Shahnawaz Ahmed,
Amr Osman,
Janka Biznárová,
Anita Fadavi Roudsari,
Benjamin Lienhard,
Marco Caputo,
Kestutis Grigoras,
Leif Grönberg,
Joonas Govenius,
Anton Frisk Kockum,
Per Delsing,
Jonas Bylander,
Giovanna Tancredi
Abstract:
High-fidelity and rapid readout of a qubit state is key to quantum computing and communication, and it is a prerequisite for quantum error correction. We present a readout scheme for superconducting qubits that combines two microwave techniques: applying a shelving technique to the qubit that effectively increases the energy-relaxation time, and a two-tone excitation of the readout resonator to di…
▽ More
High-fidelity and rapid readout of a qubit state is key to quantum computing and communication, and it is a prerequisite for quantum error correction. We present a readout scheme for superconducting qubits that combines two microwave techniques: applying a shelving technique to the qubit that effectively increases the energy-relaxation time, and a two-tone excitation of the readout resonator to distinguish among qubit populations in higher energy levels. Using a machine-learning algorithm to post-process the two-tone measurement results further improves the qubit-state assignment fidelity. We perform single-shot frequency-multiplexed qubit readout, with a 140ns readout time, and demonstrate 99.5% assignment fidelity for two-state readout and 96.9% for three-state readout - without using a quantum-limited amplifier.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
Extensive characterization of a family of efficient three-qubit gates at the coherence limit
Authors:
Christopher W. Warren,
Jorge Fernández-Pendás,
Shahnawaz Ahmed,
Tahereh Abad,
Andreas Bengtsson,
Janka Biznárová,
Kamanasish Debnath,
Xiu Gu,
Christian Križan,
Amr Osman,
Anita Fadavi Roudsari,
Per Delsing,
Göran Johansson,
Anton Frisk Kockum,
Giovanna Tancredi,
Jonas Bylander
Abstract:
While all quantum algorithms can be expressed in terms of single-qubit and two-qubit gates, more expressive gate sets can help reduce the algorithmic depth. This is important in the presence of gate errors, especially those due to decoherence. Using superconducting qubits, we have implemented a three-qubit gate by simultaneously applying two-qubit operations, thereby realizing a three-body interac…
▽ More
While all quantum algorithms can be expressed in terms of single-qubit and two-qubit gates, more expressive gate sets can help reduce the algorithmic depth. This is important in the presence of gate errors, especially those due to decoherence. Using superconducting qubits, we have implemented a three-qubit gate by simultaneously applying two-qubit operations, thereby realizing a three-body interaction. This method straightforwardly extends to other quantum hardware architectures, requires only a "firmware" upgrade to implement, and is faster than its constituent two-qubit gates. The three-qubit gate represents an entire family of operations, creating flexibility in quantum-circuit compilation. We demonstrate a gate fidelity of $97.90\%$, which is near the coherence limit of our device. We then generate two classes of entangled states, the GHZ and W states, by applying the new gate only once; in comparison, decompositions into the standard gate set would have a two-qubit gate depth of two and three, respectively. Finally, we combine characterization methods and analyze the experimental and statistical errors on the fidelity of the gates and of the target states.
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Ground-based observability of Dimorphos DART impact ejecta: Photometric predictions
Authors:
Fernando Moreno,
Adriano Campo Bagatin,
Gonzalo Tancredi,
Po-Yen Liu,
Bruno Dominguez
Abstract:
The Double Asteroid Redirection Test (DART) is a NASA mission intended to crash a projectile on Dimorphos, the secondary component of the binary (65803) Didymos system, to study its orbit deflection. As a consequence of the impact, a dust cloud will be be ejected from the body, potentially forming a transient coma- or comet-like tail on the hours or days following the impact, which might be observ…
▽ More
The Double Asteroid Redirection Test (DART) is a NASA mission intended to crash a projectile on Dimorphos, the secondary component of the binary (65803) Didymos system, to study its orbit deflection. As a consequence of the impact, a dust cloud will be be ejected from the body, potentially forming a transient coma- or comet-like tail on the hours or days following the impact, which might be observed using ground-based instrumentation. Based on the mass and speed of the impactor, and using known scaling laws, the total mass ejected can be roughly estimated. Then, with the aim to provide approximate expected brightness levels of the coma and tail extent and morphology, we have propagated the orbits of the particles ejected by integrating their equation of motion, and have used a Monte Carlo approach to study the evolution of the coma and tail brightness. For typical power-law particle size distribution of index --3.5, with radii r$_{rmin}$=1 $μ$m and r$_{max}$=1 cm, and ejection speeds near 10 times the escape velocity of Dimorphos, we predict an increase of brightness of $\sim$3 magnitudes right after the impact, and a decay to pre-impact levels some 10 days after. That would be the case if the prevailing ejection mechanism comes from the impact-induced seismic wave. However, if most of the ejecta is released at speeds of the order of $\gtrsim$100 $\mathrm{m\; s^{-1}}$, the observability of the event would reduce to a very short time span, of the order of one day or shorter.
△ Less
Submitted 30 June, 2022;
originally announced June 2022.
-
Measurement and control of a superconducting quantum processor with a fully-integrated radio-frequency system on a chip
Authors:
Mats O. Tholén,
Riccardo Borgani,
Giuseppe Ruggero Di Carlo,
Andreas Bengtsson,
Christian Križan,
Marina Kudra,
Giovanna Tancredi,
Jonas Bylander,
Per Delsing,
Simone Gasparinetti,
David B. Haviland
Abstract:
We describe a digital microwave platform called Presto, designed for measurement and control of multiple quantum bits (qubits) and based on the third-generation radio-frequency system on a chip. Presto uses direct digital synthesis to create signals up to 9 GHz on 16 synchronous output ports, while synchronously analyzing response on 16 input ports. Presto has 16 DC-bias outputs, 4 inputs and 4 ou…
▽ More
We describe a digital microwave platform called Presto, designed for measurement and control of multiple quantum bits (qubits) and based on the third-generation radio-frequency system on a chip. Presto uses direct digital synthesis to create signals up to 9 GHz on 16 synchronous output ports, while synchronously analyzing response on 16 input ports. Presto has 16 DC-bias outputs, 4 inputs and 4 outputs for digital triggers or markers, and two continuous-wave outputs for synthesizing frequencies up to 15 GHz. Scaling to a large number of qubits is enabled through deterministic synchronization of multiple Presto units. A Python application programming interface configures a firmware for synthesis and analysis of pulses, coordinated by an event sequencer. The analysis integrates template matching (matched filtering) and low-latency (184 - 254 ns) feedback to enable a wide range of multi-qubit experiments. We demonstrate Presto's capabilities with experiments on a sample consisting of two superconducting qubits connected via a flux-tunable coupler. We show single-shot readout and active reset of a single qubit; randomized benchmarking of single-qubit gates showing 99.972% fidelity, limited by the coherence time of the qubit; and calibration of a two-qubit iSWAP gate.
△ Less
Submitted 31 October, 2022; v1 submitted 30 May, 2022;
originally announced May 2022.
-
Reference-State Error Mitigation: A Strategy for High Accuracy Quantum Computation of Chemistry
Authors:
Phalgun Lolur,
Mårten Skogh,
Christopher Warren,
Janka Biznárová,
Amr Osman,
Giovanna Tancredi,
Göran Wendin,
Jonas Bylander,
Martin Rahm
Abstract:
Decoherence and gate errors severely limit the capabilities of state-of-the-art quantum computers. This work introduces a strategy for reference-state error mitigation (REM) of quantum chemistry that can be straightforwardly implemented on current and near-term devices. REM can be applied alongside existing mitigation procedures, while requiring minimal post-processing and only one or no additiona…
▽ More
Decoherence and gate errors severely limit the capabilities of state-of-the-art quantum computers. This work introduces a strategy for reference-state error mitigation (REM) of quantum chemistry that can be straightforwardly implemented on current and near-term devices. REM can be applied alongside existing mitigation procedures, while requiring minimal post-processing and only one or no additional measurements. The approach is agnostic to the underlying quantum mechanical ansatz and is designed for the variational quantum eigensolver (VQE). Two orders-of-magnitude improvement in the computational accuracy of ground state energies of small molecules (H2, HeH+ and LiH) is demonstrated on superconducting quantum hardware. Simulations of noisy circuits with a depth exceeding 1000 two-qubit gates are used to argue for scalability of the method.
△ Less
Submitted 28 March, 2022;
originally announced March 2022.
-
Building Blocks of a Flip-Chip Integrated Superconducting Quantum Processor
Authors:
Sandoko Kosen,
Hang-Xi Li,
Marcus Rommel,
Daryoush Shiri,
Christopher Warren,
Leif Grönberg,
Jaakko Salonen,
Tahereh Abad,
Janka Biznárová,
Marco Caputo,
Liangyu Chen,
Kestutis Grigoras,
Göran Johansson,
Anton Frisk Kockum,
Christian Križan,
Daniel Pérez Lozano,
Graham Norris,
Amr Osman,
Jorge Fernández-Pendás,
Alberto Ronzani,
Anita Fadavi Roudsari,
Slawomir Simbierowicz,
Giovanna Tancredi,
Andreas Wallraff,
Christopher Eichler
, et al. (2 additional authors not shown)
Abstract:
We have integrated single and coupled superconducting transmon qubits into flip-chip modules. Each module consists of two chips -- one quantum chip and one control chip -- that are bump-bonded together. We demonstrate time-averaged coherence times exceeding $90\,μs$, single-qubit gate fidelities exceeding $99.9\%$, and two-qubit gate fidelities above $98.6\%$. We also present device design methods…
▽ More
We have integrated single and coupled superconducting transmon qubits into flip-chip modules. Each module consists of two chips -- one quantum chip and one control chip -- that are bump-bonded together. We demonstrate time-averaged coherence times exceeding $90\,μs$, single-qubit gate fidelities exceeding $99.9\%$, and two-qubit gate fidelities above $98.6\%$. We also present device design methods and discuss the sensitivity of device parameters to variation in interchip spacing. Notably, the additional flip-chip fabrication steps do not degrade the qubit performance compared to our baseline state-of-the-art in single-chip, planar circuits. This integration technique can be extended to the realisation of quantum processors accommodating hundreds of qubits in one module as it offers adequate input/output wiring access to all qubits and couplers.
△ Less
Submitted 14 June, 2022; v1 submitted 5 December, 2021;
originally announced December 2021.
-
Fast multi-qubit gates through simultaneous two-qubit gates
Authors:
Xiu Gu,
Jorge Fernández-Pendás,
Pontus Vikstål,
Tahereh Abad,
Christopher Warren,
Andreas Bengtsson,
Giovanna Tancredi,
Vitaly Shumeiko,
Jonas Bylander,
Göran Johansson,
Anton Frisk Kockum
Abstract:
Near-term quantum computers are limited by the decoherence of qubits to only being able to run low-depth quantum circuits with acceptable fidelity. This severely restricts what quantum algorithms can be compiled and implemented on such devices. One way to overcome these limitations is to expand the available gate set from single- and two-qubit gates to multi-qubit gates, which entangle three or mo…
▽ More
Near-term quantum computers are limited by the decoherence of qubits to only being able to run low-depth quantum circuits with acceptable fidelity. This severely restricts what quantum algorithms can be compiled and implemented on such devices. One way to overcome these limitations is to expand the available gate set from single- and two-qubit gates to multi-qubit gates, which entangle three or more qubits in a single step. Here, we show that such multi-qubit gates can be realized by the simultaneous application of multiple two-qubit gates to a group of qubits where at least one qubit is involved in two or more of the two-qubit gates. Multi-qubit gates implemented in this way are as fast as, or sometimes even faster than, the constituent two-qubit gates. Furthermore, these multi-qubit gates do not require any modification of the quantum processor, but are ready to be used in current quantum-computing platforms. We demonstrate this idea for two specific cases: simultaneous controlled-Z gates and simultaneous iSWAP gates. We show how the resulting multi-qubit gates relate to other well-known multi-qubit gates and demonstrate through numerical simulations that they would work well in available quantum hardware, reaching gate fidelities well above 99 %. We also present schemes for using these simultaneous two-qubit gates to swiftly create large entangled states like Dicke and Greenberg-Horne-Zeilinger states.
△ Less
Submitted 25 August, 2021;
originally announced August 2021.
-
HSTCosmicrays: A Python Package for Analyzing Cosmic Rays in HST Calibration Data
Authors:
N. D. Miles,
S. Deustua,
G. Tancredi
Abstract:
HSTCosmicrays is a python-based pipeline designed to find and characterize cosmic rays found in dark frames (exposures taken with the shutter closed). Dark exposures are obtained routinely by all the Hubble Space Telescope (HST) instruments for calibration. The main processing pipeline runs locally or in the cloud on AWS. To date, we have characterized more than 1.2 billion cosmic rays in ~76,000…
▽ More
HSTCosmicrays is a python-based pipeline designed to find and characterize cosmic rays found in dark frames (exposures taken with the shutter closed). Dark exposures are obtained routinely by all the Hubble Space Telescope (HST) instruments for calibration. The main processing pipeline runs locally or in the cloud on AWS. To date, we have characterized more than 1.2 billion cosmic rays in ~76,000 dark frames obtained with CCDs from the four active instruments ACS/HRC, ACS/WFC, STIS, WFC3/UVIS, and the legacy instrument WFPC2.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
-
Using Cosmic Rays detected by HST as Geophysical Markers I: Detection and Characterization of Cosmic Rays
Authors:
Nathan Miles,
Susana E. Deustua,
Gonzalo Tancredi,
German Schnyder,
Sergio Nesmachnow,
Geoffrey Cromwell
Abstract:
The Hubble Space Telescope (HST) has been operational for over 30 years and throughout that time it has been bombarded by high energy charged particles colloquially referred to as cosmic rays. In this paper, we present a comprehensive study of more than 1.2 billion cosmic rays observed with HST using a custom written python package, \texttt{HSTcosmicrays}, that is available to the astronomical com…
▽ More
The Hubble Space Telescope (HST) has been operational for over 30 years and throughout that time it has been bombarded by high energy charged particles colloquially referred to as cosmic rays. In this paper, we present a comprehensive study of more than 1.2 billion cosmic rays observed with HST using a custom written python package, \texttt{HSTcosmicrays}, that is available to the astronomical community. We analyzed $75,908$ dark calibration files taken as part of routine calibration programs for five different CCD imagers with operational coverage of Solar Cycle 23 and 24. We observe the expected modulation of galactic cosmic rays by solar activity. We model the observed energy-loss distributions to derive an estimate of 534 $\pm$ 117 MeV for the kinetic energy of the typical cosmic ray impacting HST. For the three imagers with the largest non-uniformity in thickness, we independently confirm the overall structure produced by fringing analyses by analyzing cosmic ray strikes across the detector field of view. We analyze STIS/CCD observations taken as HST crosses over the South Atlantic Anomaly and find a peak cosmic-ray particle flux of $\sim1100$ $particle/s/cm^2$. We find strong evidence for two spatially confined regions over North America and Australia that exhibit increased cosmic-ray particle fluxes at the $5σ$ level.
△ Less
Submitted 6 May, 2021; v1 submitted 1 June, 2020;
originally announced June 2020.
-
Improved success probability with greater circuit depth for the quantum approximate optimization algorithm
Authors:
Andreas Bengtsson,
Pontus Vikstål,
Christopher Warren,
Marika Svensson,
Xiu Gu,
Anton Frisk Kockum,
Philip Krantz,
Christian Križan,
Daryoush Shiri,
Ida-Maria Svensson,
Giovanna Tancredi,
Göran Johansson,
Per Delsing,
Giulia Ferrini,
Jonas Bylander
Abstract:
Present-day, noisy, small or intermediate-scale quantum processors---although far from fault-tolerant---support the execution of heuristic quantum algorithms, which might enable a quantum advantage, for example, when applied to combinatorial optimization problems. On small-scale quantum processors, validations of such algorithms serve as important technology demonstrators. We implement the quantum…
▽ More
Present-day, noisy, small or intermediate-scale quantum processors---although far from fault-tolerant---support the execution of heuristic quantum algorithms, which might enable a quantum advantage, for example, when applied to combinatorial optimization problems. On small-scale quantum processors, validations of such algorithms serve as important technology demonstrators. We implement the quantum approximate optimization algorithm (QAOA) on our hardware platform, consisting of two superconducting transmon qubits and one parametrically modulated coupler. We solve small instances of the NP-complete exact-cover problem, with 96.6% success probability, by iterating the algorithm up to level two.
△ Less
Submitted 15 August, 2020; v1 submitted 22 December, 2019;
originally announced December 2019.
-
The trans-Neptunian object (84922) 2003 VS2 through stellar occultations
Authors:
Gustavo Benedetti-Rossi,
P. Santos-Sanz,
J. L. Ortiz,
M. Assafin,
B. Sicardy,
N. Morales,
R. Vieira-Martins,
R. Duffard,
F. Braga-Ribas,
F. L. Rommel,
J. I. B. Camargo,
J. Desmars,
A. F. Colas,
F. Vachier,
Alvarez-Candal,
E. Fernández-Valenzuela,
L. Almenares,
R. Artola,
T. -P. Baum,
R. Behrend,
D. Bérard,
F. Bianco,
N. Brosch,
A. Ceretta,
C. A. Colazo
, et al. (28 additional authors not shown)
Abstract:
We present results from three world-wide campaigns that resulted in the detections of two single-chord and one multi-chord stellar occultations by the Plutino object (84922) 2003~VS$_2$. From the single-chord occultations in 2013 and 2014 we obtained accurate astrometric positions for the object, while from the multi-chord occultation on November 7th, 2014, we obtained the parameters of the best-f…
▽ More
We present results from three world-wide campaigns that resulted in the detections of two single-chord and one multi-chord stellar occultations by the Plutino object (84922) 2003~VS$_2$. From the single-chord occultations in 2013 and 2014 we obtained accurate astrometric positions for the object, while from the multi-chord occultation on November 7th, 2014, we obtained the parameters of the best-fitting ellipse to the limb of the body at the time of occultation. We also obtained short-term photometry data for the body in order to derive its rotational phase during the occultation. The rotational light curve present a peak-to-peak amplitude of 0.141 $\pm$ 0.009 mag. This allows us to reconstruct the three-dimensional shape of the body, with principal semi-axes $a = 313.8 \pm 7.1$ km, $b = 265.5^{+8.8}_{-9.8}$ km, and $c = 247.3^{+26.6}_{-43.6}$ km, which is not consistent with a Jacobi triaxial equilibrium figure. The derived spherical volume equivalent diameter of $548.3 ^{+29.5}_{-44.6}$ km is about 5\% larger than the radiometric diameter of 2003~VS$_2$ derived from Herschel data of $523 \pm 35$ km, but still compatible with it within error bars. From those results we can also derive the geometric albedo ($0.123 ^{+0.015}_{-0.014}$) and, under the assumption that the object is a Maclaurin spheroid, the density $ρ= 1400^{+1000}_{-300}$ for the plutino. The disappearances and reappearances of the star during the occultations do not show any compelling evidence for a global atmosphere considering a pressure upper limit of about 1 microbar for a pure nitrogen atmosphere, nor secondary features (e.g. rings or satellite) around the main body.
△ Less
Submitted 19 August, 2019;
originally announced August 2019.
-
Critical slowing down in the bistable regime of circuit quantum electrodynamics
Authors:
P. Brookes,
G. Tancredi,
A. D. Patterson,
J. Rahamim,
M. Esposito,
P. J. Leek,
E. Ginossar,
M. H. Szymanska
Abstract:
We investigate the dynamics of the bistable regime of the generalized Jaynes-Cummings Hamiltonian (GJC), realised by a circuit quantum electrodynamics (cQED) system consisting of a transmon qubit coupled to a microwave cavity. In this regime we observe critical slowing down in the approach to the steady state. By measuring the response of the cavity to a step function drive pulse we characterize t…
▽ More
We investigate the dynamics of the bistable regime of the generalized Jaynes-Cummings Hamiltonian (GJC), realised by a circuit quantum electrodynamics (cQED) system consisting of a transmon qubit coupled to a microwave cavity. In this regime we observe critical slowing down in the approach to the steady state. By measuring the response of the cavity to a step function drive pulse we characterize this slowing down as a function of driving frequency and power. We find that the critical slowing down saturates as the driving power is increased. We compare these results with the predictions of analytical and numerical calculations both with and without the Duffing approximation. We find that the Duffing approximation incorrectly predicts that the critical slowing down timescale increases exponentially with the drive, whereas the GJC model accurately predicts the saturation seen in our data, suggesting a different process of quantum activation.
△ Less
Submitted 31 July, 2019;
originally announced July 2019.
-
Calibration of the cross-resonance two-qubit gate between directly-coupled transmons
Authors:
A. D. Patterson,
J. Rahamim,
T. Tsunoda,
P. Spring,
S. Jebari,
K. Ratter,
M. Mergenthaler,
G. Tancredi,
B. Vlastakis,
M. Esposito,
P. J. Leek
Abstract:
Quantum computation requires the precise control of the evolution of a quantum system, typically through application of discrete quantum logic gates on a set of qubits. Here, we use the cross-resonance interaction to implement a gate between two superconducting transmon qubits with a direct static dispersive coupling. We demonstrate a practical calibration procedure for the optimization of the gat…
▽ More
Quantum computation requires the precise control of the evolution of a quantum system, typically through application of discrete quantum logic gates on a set of qubits. Here, we use the cross-resonance interaction to implement a gate between two superconducting transmon qubits with a direct static dispersive coupling. We demonstrate a practical calibration procedure for the optimization of the gate, combining continuous and repeated-gate Hamiltonian tomography with step-wise reduction of dominant two-qubit coherent errors through mapping to microwave control parameters. We show experimentally that this procedure can enable a $\hat{ZX}_{-π/2}$ gate with a fidelity $F=97.0(7)\%$, measured with interleaved randomized benchmarking. We show this in a architecture with out-of-plane control and readout that is readily extensible to larger scale quantum circuits.
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
-
Baryon acoustic oscillations from Integrated Neutral Gas Observations: Radio frequency interference measurements and telescope site selection
Authors:
M. W. Peel,
C. A. Wuensche,
E. Abdalla,
S. Anton,
L. Barosi,
I. W. A. Browne,
M. Caldas,
C. Dickinson,
K. S. F. Fornazier,
C. Monstein,
C. Strauss,
G. Tancredi,
T. Villela
Abstract:
The Baryon acoustic oscillations from Integrated Neutral Gas Observations (BINGO) telescope is a new 40-m class radio telescope to measure the large-angular-scale intensity of Hi emission at 980-1260 MHz to constrain dark energy parameters. As it needs to measure faint cosmological signals at the milliKelvin level, it requires a site that has very low radio frequency interference (RFI) at frequenc…
▽ More
The Baryon acoustic oscillations from Integrated Neutral Gas Observations (BINGO) telescope is a new 40-m class radio telescope to measure the large-angular-scale intensity of Hi emission at 980-1260 MHz to constrain dark energy parameters. As it needs to measure faint cosmological signals at the milliKelvin level, it requires a site that has very low radio frequency interference (RFI) at frequencies around 1 GHz. We report on measurement campaigns across Uruguay and Brazil to find a suitable site, which looked at the strength of the mobile phone signals and other radio transmissions, the location of wind turbines, and also included mapping airplane flight paths. The site chosen for the BINGO telescope is a valley at Serra do Urubu, a remote part of Paraiba in North-East Brazil, which has sheltering terrain. During our measurements with a portable receiver we did not detect any RFI in or near the BINGO band, given the sensitivity of the equipment. A radio quiet zone around the selected site has been requested to the Brazilian authorities ahead of the telescope construction.
△ Less
Submitted 23 November, 2018;
originally announced November 2018.
-
The structure of Chariklo's rings from stellar occultations
Authors:
D. Bérard,
B. Sicardy,
J. I. B. Camargo,
J. Desmars,
F. Braga-Ribas,
J. L. Ortiz,
R. Duffard,
N. Morales,
E. Meza,
R. Leiva,
G. Benedetti-Rossi,
R. Vieira-Martins,
A. R. Gomes-Júnior,
M. Assafin,
F. Colas,
J. L. Dauvergne,
P. Kervella,
J. Lecacheux,
L. Maquet,
F. Vachier,
S. Renner,
B. Monard,
A. A. Sickafoose,
H. Breytenbach,
A. Genade
, et al. (57 additional authors not shown)
Abstract:
Two narrow and dense rings (called C1R and C2R) were discovered around the Centaur object (10199) Chariklo during a stellar occultation observed on 2013 June 3. Following this discovery, we planned observations of several occultations by Chariklo's system in order to better characterize the physical properties of the ring and main body. Here, we use 12 successful occulations by Chariklo observed b…
▽ More
Two narrow and dense rings (called C1R and C2R) were discovered around the Centaur object (10199) Chariklo during a stellar occultation observed on 2013 June 3. Following this discovery, we planned observations of several occultations by Chariklo's system in order to better characterize the physical properties of the ring and main body. Here, we use 12 successful occulations by Chariklo observed between 2014 and 2016. They provide ring profiles (physical width, opacity, edge structure) and constraints on the radii and pole position. Our new observations are currently consistent with the circular ring solution and pole position, to within the $\pm 3.3$ km formal uncertainty for the ring radii derived by Braga-Ribas et al. The six resolved C1R profiles reveal significant width variations from $\sim 5$ to 7.5 km. The width of the fainter ring C2R is less constrained, and may vary between 0.1 and 1 km. The inner and outer edges of C1R are consistent with infinitely sharp boundaries, with typical upper limits of one kilometer for the transition zone between the ring and empty space. No constraint on the sharpness of C2R's edges is available. A 1$σ$ upper limit of $\sim 20$ m is derived for the equivalent width of narrow (physical width <4 km) rings up to distances of 12,000 km, counted in the ring plane.
△ Less
Submitted 18 September, 2017; v1 submitted 1 June, 2017;
originally announced June 2017.
-
Double-sided coaxial circuit QED with out-of-plane wiring
Authors:
J. Rahamim,
T. Behrle,
M. J. Peterer,
A. Patterson,
P. Spring,
T. Tsunoda,
R. Manenti,
G. Tancredi,
P. J. Leek
Abstract:
Superconducting circuits are well established as a strong candidate platform for the development of quantum computing. In order to advance to a practically useful level, architectures are needed which combine arrays of many qubits with selective qubit control and readout, without compromising on coherence. Here we present a coaxial circuit QED architecture in which qubit and resonator are fabricat…
▽ More
Superconducting circuits are well established as a strong candidate platform for the development of quantum computing. In order to advance to a practically useful level, architectures are needed which combine arrays of many qubits with selective qubit control and readout, without compromising on coherence. Here we present a coaxial circuit QED architecture in which qubit and resonator are fabricated on opposing sides of a single chip, and control and readout wiring are provided by coaxial wiring running perpendicular to the chip plane. We present characterisation measurements of a fabricated device in good agreement with simulated parameters and demonstrating energy relaxation and dephasing times of $T_1 = 4.1\,μ$s and $T_2 = 5.7\,μ$s respectively. The architecture allows for scaling to large arrays of selectively controlled and measured qubits with the advantage of all wiring being out of the plane.
△ Less
Submitted 1 June, 2017; v1 submitted 16 March, 2017;
originally announced March 2017.
-
Circuit quantum acoustodynamics with surface acoustic waves
Authors:
R. Manenti,
A. F. Kockum,
A. Patterson,
T. Behrle,
J. Rahamim,
G. Tancredi,
F. Nori,
P. J. Leek
Abstract:
The experimental investigation of quantum devices incorporating mechanical resonators has opened up new frontiers in the study of quantum mechanics at a macroscopic level$^{1,2}$. Superconducting microwave circuits have proven to be a powerful platform for the realisation of such quantum devices, both in cavity optomechanics$^{3,4}$, and circuit quantum electro-dynamics (QED)$^{5,6}$. While most e…
▽ More
The experimental investigation of quantum devices incorporating mechanical resonators has opened up new frontiers in the study of quantum mechanics at a macroscopic level$^{1,2}$. Superconducting microwave circuits have proven to be a powerful platform for the realisation of such quantum devices, both in cavity optomechanics$^{3,4}$, and circuit quantum electro-dynamics (QED)$^{5,6}$. While most experiments to date have involved localised nanomechanical resonators, it has recently been shown that propagating surface acoustic waves (SAWs) can be piezoelectrically coupled to superconducting qubits$^{7,8}$, and confined in high-quality Fabry-Perot cavities up to microwave frequencies in the quantum regime$^{9}$, indicating the possibility of realising coherent exchange of quantum information between the two systems. Here we present measurements of a device in which a superconducting qubit is embedded in, and interacts with, the acoustic field of a Fabry-Perot SAW cavity on quartz, realising a surface acoustic version of cavity quantum electrodynamics. This quantum acoustodynamics (QAD) architecture may be used to develop new quantum acoustic devices in which quantum information is stored in trapped on-chip surface acoustic wavepackets, and manipulated in ways that are impossible with purely electromagnetic signals, due to the $10^{5}$ times slower speed of travel of the mechanical waves.
△ Less
Submitted 13 March, 2017;
originally announced March 2017.
-
Simultaneous bistability of qubit and resonator in circuit quantum electrodynamics
Authors:
Th. K. Mavrogordatos,
G. Tancredi,
M. Elliott,
M. J. Peterer,
A. Patterson,
J. Rahamim,
P. J. Leek,
E. Ginossar,
M. H. Szymańska
Abstract:
We explore the joint activated dynamics exhibited by two quantum degrees of freedom: a cavity mode oscillator which is strongly coupled to a superconducting qubit in the strongly coherently driven dispersive regime. Dynamical simulations and complementary measurements show a range of parameters where both the cavity and the qubit exhibit sudden simultaneous switching between two metastable states.…
▽ More
We explore the joint activated dynamics exhibited by two quantum degrees of freedom: a cavity mode oscillator which is strongly coupled to a superconducting qubit in the strongly coherently driven dispersive regime. Dynamical simulations and complementary measurements show a range of parameters where both the cavity and the qubit exhibit sudden simultaneous switching between two metastable states. This manifests in ensemble averaged amplitudes of both the cavity and qubit exhibiting a partial coherent cancellation. Transmission measurements of driven microwave cavities coupled to transmon qubits show detailed features which agree with the theory in the regime of simultaneous switching.
△ Less
Submitted 2 January, 2017; v1 submitted 30 November, 2016;
originally announced November 2016.
-
Update on the BINGO 21cm intensity mapping experiment
Authors:
Richard Battye,
Ian Browne,
Tianyue Chen,
Clive Dickinson,
Stuart Harper,
Lucas Olivari,
Michael Peel,
Mathieu Remazeilles,
Sambit Roychowdhury,
Peter Wilkinson,
Elcio Abdalla,
Raul Abramo,
Elisa Ferreira,
Alex Wuensche,
Thyrso Vilella,
Manuel Caldas,
Gonzalo Tancredi,
Alexandre Refregier,
Christian Monstein,
Filipe Abdalla,
Alkistis Pourtsidou,
Bruno Maffei,
Giampaolo Pisano,
Yin-Zhe Ma
Abstract:
21cm intensity mapping is a novel approach aimed at measuring the power spectrum of density fluctuations and deducing cosmological information, notably from the Baryonic Acoustic Oscillations (BAO). We give an update on the progress of BAO from Integrated Neutral Gas Observations (BINGO) which is a single dish intensity mapping project. First we explain the basic ideas behind intensity mapping con…
▽ More
21cm intensity mapping is a novel approach aimed at measuring the power spectrum of density fluctuations and deducing cosmological information, notably from the Baryonic Acoustic Oscillations (BAO). We give an update on the progress of BAO from Integrated Neutral Gas Observations (BINGO) which is a single dish intensity mapping project. First we explain the basic ideas behind intensity mapping concept before updating the instrument design for BINGO. We also outline the survey we plan to make and its projected science output including estimates of cosmological parameters.
△ Less
Submitted 21 October, 2016;
originally announced October 2016.
-
JWST observations of stellar occultations by solar system bodies and rings
Authors:
P. Santos-Sanz,
R. G. French,
N. Pinilla-Alonso,
J. Stansberry,
Z-Y. Lin,
Z-W. Zhang,
E. Vilenius,
Th. Müller,
J. L. Ortiz,
F. Braga-Ribas,
A. Bosh,
R. Duffard,
E. Lellouch,
G. Tancredi,
L. Young,
S. N. Milam,
the JWST occultations focus group.
Abstract:
In this paper we investigate the opportunities provided by the James Webb Space Telescope (JWST) for significant scientific advances in the study of solar system bodies and rings using stellar occultations. The strengths and weaknesses of the stellar occultation technique are evaluated in light of JWST's unique capabilities. We identify several possible JWST occultation events by minor bodies and…
▽ More
In this paper we investigate the opportunities provided by the James Webb Space Telescope (JWST) for significant scientific advances in the study of solar system bodies and rings using stellar occultations. The strengths and weaknesses of the stellar occultation technique are evaluated in light of JWST's unique capabilities. We identify several possible JWST occultation events by minor bodies and rings, and evaluate their potential scientific value. These predictions depend critically on accurate a priori knowledge of the orbit of JWST near the Sun-Earth Lagrange-point 2 (L2). We also explore the possibility of serendipitous stellar occultations by very small minor bodies as a by-product of other JWST observing programs. Finally, to optimize the potential scientific return of stellar occultation observations, we identify several characteristics of JWST's orbit and instrumentation that should be taken into account during JWST's development.
△ Less
Submitted 24 November, 2015; v1 submitted 22 October, 2015;
originally announced October 2015.
-
Size and albedo distributions of asteroids in cometary orbits using WISE data
Authors:
J. Licandro,
V. Ali-Lagoa,
G. Tancredi,
Y. Fernandez
Abstract:
We study the distributions of effective diameter ($D$), beaming parameter ($η$), and visible geometric albedo ($p_V$) of asteroids in cometry orbits (ACOs) populations, derived from NASA's Wide-field Infrared Explorer (WISE) observations, and compare these with the same, independently determined properties of the comets. The near-Earth asteroid thermal model (NEATM) is used to compute the $D$,…
▽ More
We study the distributions of effective diameter ($D$), beaming parameter ($η$), and visible geometric albedo ($p_V$) of asteroids in cometry orbits (ACOs) populations, derived from NASA's Wide-field Infrared Explorer (WISE) observations, and compare these with the same, independently determined properties of the comets. The near-Earth asteroid thermal model (NEATM) is used to compute the $D$, $p_V$ and $η$. We obtained $D$ and $p_V$ for 49 ACOs in Jupiter family cometary orbits (JF-ACOs) and 16 ACOs in Halley-type orbits (Damocloids). We also obtained $η$ for 45 of them. All but three JF-ACOs (95% of the sample) present a low albedo compatible with a cometary origin. The $p_V$ and $η$ distributions of both ACO populations are very similar. For the entire sample of ACOs, the mean geometric albedo is $\bar{p_V} = 0.05 \pm 0.02$, ($\bar{p_V} = 0.05 \pm 0.01$ and $\bar{p_V} =0.05 \pm 0.02$ for JF-ACOs and Damocloids, respectively) compatible with a narrow albedo distribution similar to that of the Jupiter family comets (JFCs), with a $\bar{p_V} \sim 0.04$. The $\barη =1.0 \pm 0.2$. We find no correlations between $D$, $p_V$ , or $η$. We compare the cumulative size distribution (CSD) of ACOs, Centaurs, and JFCs. Although the Centaur sample contains larger objects, the linear parts in their log-log plot of the CSDs presents a similar cumulative exponent ($β= 1.85 \pm 0.30$ and $1.76 \pm 0.35$, respectively). The CSD for Damocloids presents a much shallower exponent $β= 0.89 \pm 0.17$. The CSD for JF-ACOs is shallower and shifted towards larger diameters with respect to the CSD of active JFCs, which suggests that the mantling process has a size dependency whereby large comets tend to reach an inactive stage faster than small ones. Finally, the population of JF-ACOs is comparable in number that of JFCs, although there are more tens-km JF-ACOs than JFCs.
△ Less
Submitted 8 October, 2015;
originally announced October 2015.
-
A ring system detected around the Centaur (10199) Chariklo
Authors:
F. Braga-Ribas,
B. Sicardy,
J. L. Ortiz,
C. Snodgrass,
F. Roques,
R. Vieira-Martins,
J. I. B. Camargo,
M. Assafin,
R. Duffard,
E. Jehin,
J. Pollock,
R. Leiva,
M. Emilio,
D. I. Machado,
C. Colazo,
E. Lellouch,
J. Skottfelt,
M. Gillon,
N. Ligier,
L. Maquet,
G. Benedetti-Rossi,
A. Ramos Gomes Jr,
P. Kervella,
H. Monteiro,
R. Sfair
, et al. (39 additional authors not shown)
Abstract:
Until now, rings have been detected in the Solar System exclusively around the four giant planets. Here we report the discovery of the first minor-body ring system around the Centaur object (10199) Chariklo, a body with equivalent radius 124$\pm$9 km. A multi-chord stellar occultation revealed the presence of two dense rings around Chariklo, with widths of about 7 km and 3 km, optical depths 0.4 a…
▽ More
Until now, rings have been detected in the Solar System exclusively around the four giant planets. Here we report the discovery of the first minor-body ring system around the Centaur object (10199) Chariklo, a body with equivalent radius 124$\pm$9 km. A multi-chord stellar occultation revealed the presence of two dense rings around Chariklo, with widths of about 7 km and 3 km, optical depths 0.4 and 0.06, and orbital radii 391 and 405 km, respectively. The present orientation of the ring is consistent with an edge-on geometry in 2008, thus providing a simple explanation for the dimming of Chariklo's system between 1997 and 2008, and for the gradual disappearance of ice and other absorption features in its spectrum over the same period. This implies that the rings are partially composed of water ice. These rings may be the remnants of a debris disk, which were possibly confined by embedded kilometre-sized satellites.
△ Less
Submitted 25 September, 2014;
originally announced September 2014.
-
A photometric search for active Main Belt asteroids
Authors:
S. Cikota,
J. L. Ortiz,
A. Cikota,
N. Morales,
G. Tancredi
Abstract:
It is well known that some Main Belt asteroids show comet-like features. A representative example is the first known Main Belt comet 133P/(7968) Elst-Pizarro. If the mechanisms causing this activity are too weak to develop visually evident comae or tails, the objects stay unnoticed. We are presenting a novel way to search for active asteroids, based on looking for objects with deviations from thei…
▽ More
It is well known that some Main Belt asteroids show comet-like features. A representative example is the first known Main Belt comet 133P/(7968) Elst-Pizarro. If the mechanisms causing this activity are too weak to develop visually evident comae or tails, the objects stay unnoticed. We are presenting a novel way to search for active asteroids, based on looking for objects with deviations from their expected brightnesses in a database. Just by using the MPCAT-OBS Observation Archive we have found five new candidate objects that possibly show a type of comet-like activity, and the already known Main Belt comet 133P/(7968) Elst-Pizarro. Four of the new candidates, (315) Constantia, (1026) Ingrid, (3646) Aduatiques, and (24684) 1990 EU4, show brightness deviations independent of the object's heliocentric distance, while (35101) 1991 PL16 shows deviations dependent on its heliocentric distance, which could be an indication of a thermal triggered mechanism. The method could be implemented in future sky survey programmes to detect outbursts on Main Belt objects almost simultaneously with their occurrence.
△ Less
Submitted 21 January, 2014;
originally announced January 2014.
-
Direct spectrum analysis using a threshold detector with application to a superconducting circuit
Authors:
G. Ithier,
G. Tancredi,
P. J. Meeson
Abstract:
We introduce a new and quantitative theoretical framework for noise spectral analysis using a threshold detector, which is then applied to a superconducting device: the Cavity Bifurcation Amplifier (CBA). We show that this new framework provides direct access to the environmental noise spectrum with a sensitivity approaching the standard quantum limit of weak continuous measurements. In addition,…
▽ More
We introduce a new and quantitative theoretical framework for noise spectral analysis using a threshold detector, which is then applied to a superconducting device: the Cavity Bifurcation Amplifier (CBA). We show that this new framework provides direct access to the environmental noise spectrum with a sensitivity approaching the standard quantum limit of weak continuous measurements. In addition, the accessible frequency range of the spectrum is, in principle, limited only by the ring down time of the CBA. This on-chip noise detector is non-dissipative and works with low probing powers, allowing it to be operated at low temperatures ($T<15$mK). We exploit this technique for measuring the frequency fluctuations of the CBA and find a low frequency noise with an amplitude and spectrum compatible with a dielectric origin.
△ Less
Submitted 16 December, 2013; v1 submitted 11 December, 2013;
originally announced December 2013.
-
Cryogenic coaxial microwave filters
Authors:
G. Tancredi,
S. Schmidlin,
P. J. Meeson
Abstract:
The careful filtering of microwave electromagnetic radiation is critical for controlling the electromagnetic environment for experiments in solid-state quantum information processing and quantum metrology at millikelvin temperatures. We describe the design and fabrication of a coaxial filter assembly and demonstrate that its performance is in excellent agreement with theoretical modelling. We furt…
▽ More
The careful filtering of microwave electromagnetic radiation is critical for controlling the electromagnetic environment for experiments in solid-state quantum information processing and quantum metrology at millikelvin temperatures. We describe the design and fabrication of a coaxial filter assembly and demonstrate that its performance is in excellent agreement with theoretical modelling. We further perform an indicative test of the operation of the filters by making current-voltage measurements of small, underdamped Josephson junctions at 15 mK.
△ Less
Submitted 6 February, 2014; v1 submitted 30 August, 2013;
originally announced August 2013.
-
Bifurcation, mode coupling and noise in a nonlinear multimode superconducting RF resonator
Authors:
G. Tancredi,
G. Ithier,
P. J. Meeson
Abstract:
The addition of nonlinearity to an harmonic resonator provides a route to complex dynamical behaviour of resonant modes, including coupling between them. We present a superconducting device that makes use of the nonlinearity of Josephson junctions to introduce a controlled, tunable, nonlinear inductance to a thin film coplanar waveguide resonator. Considering the device as a potential quantum opti…
▽ More
The addition of nonlinearity to an harmonic resonator provides a route to complex dynamical behaviour of resonant modes, including coupling between them. We present a superconducting device that makes use of the nonlinearity of Josephson junctions to introduce a controlled, tunable, nonlinear inductance to a thin film coplanar waveguide resonator. Considering the device as a potential quantum optical component in the microwave regime, we create a sensitive bifurcation amplifier and then demonstrate spectroscopy of other resonant modes via the intermode coupling. We find that the sensitivity of the device approaches within a factor two quantitative agreement with a quantum model by Dykman, but is limited by a noise that has its source(s) on-chip.
△ Less
Submitted 7 February, 2014; v1 submitted 12 April, 2013;
originally announced April 2013.
-
Granular physics in low-gravity environments using DEM
Authors:
G. Tancredi,
A. Maciel,
L. Heredia,
P. Richeri,
S. Nesmachnow
Abstract:
Granular materials of different sizes are present on the surface of several atmosphere-less Solar System bodies. The phenomena related to granular materials have been studied in the framework of the discipline called Granular Physics; that has been studied experimentally in the laboratory and, in the last decades, by performing numerical simulations. The Discrete Element Method simulates the mecha…
▽ More
Granular materials of different sizes are present on the surface of several atmosphere-less Solar System bodies. The phenomena related to granular materials have been studied in the framework of the discipline called Granular Physics; that has been studied experimentally in the laboratory and, in the last decades, by performing numerical simulations. The Discrete Element Method simulates the mechanical behavior of a media formed by a set of particles which interact through their contact points. The difficulty in reproducing vacuum and low-gravity environments makes numerical simulations the most promising technique in the study of granular media under these conditions. In this work, relevant processes in minor bodies of the Solar System are studied using the Discrete Element Method. Results of simulations of size segregation in low-gravity environments in the cases of the asteroids Eros and Itokawa are presented. The segregation of particles with different densities was analysed, in particular, the case of comet P/Hartley 2. The surface shaking in these different gravity environments could produce the ejection of particles from the surface at very low relative velocities. The shaking causing the above processes is due to: impacts, explosions like the release of energy by the liberation of internal stresses or the re accommodation of material. Simulations of the passage of impact-induced seismic waves through a granular medium were also performed. We present several applications of the Discrete Element Methods for the study of the physical evolution of agglomerates of rocks under low-gravity environments.
△ Less
Submitted 26 November, 2011;
originally announced November 2011.