Showing 1–25 of 25 results for author: De Leo, M

Comparing bulge RR Lyrae stars with bulge giants -- Insight from 3D kinematics

Authors: J. Olivares Carvajal, M. Zoccali, M. De Leo, R. Contreras Ramos, C. Quezada, Á. Rojas-Arriagada, E. Valenti, R. Albarracín, Á. Valenzuela Navarro

Abstract: The structure and kinematics of the old component of the Galactic bulge are still a matter of debate. The bulk of the bulge as traced by red clump stars includes two main components, which are usually identified as the metal-rich and metal-poor components. They have different shapes, kinematics, mean metallicities, and alpha-element abundances. It is our current understanding that they are associa… ▽ More The structure and kinematics of the old component of the Galactic bulge are still a matter of debate. The bulk of the bulge as traced by red clump stars includes two main components, which are usually identified as the metal-rich and metal-poor components. They have different shapes, kinematics, mean metallicities, and alpha-element abundances. It is our current understanding that they are associated with a bar and a spheroid, respectively. On the other hand, RR Lyrae variables trace the oldest population of the bulge. While it would be natural to think that they follow the structure and kinematics of the metal-poor component, the data analysed in the literature show conflicting results. We aim to derive a rotation curve for bulge RR Lyrae stars in order to determine that the old component traced by these stars is distinct from the two main components observed in the Galactic bulge. This paper combines APOGEE-2S spectra with OGLE-IV light curves, near-IR photometry, and proper motions from the VISTA Variables in the Vía Láctea survey for 4197 RR Lyrae stars. Six-dimensional phase-space coordinates were used to calculate orbits within an updated Galactic potential and to isolate the stars. The stars that stay confined within the bulge represent 57% of our sample. Our results show that bulge RR Lyrae variables rotate more slowly than metal-rich red clump stars and have a lower velocity dispersion. Their kinematics is compatible with them being the low-metallicity tail of the metal-poor component. We confirm that a rather large fraction of halo RR Lyrae stars pass by the bulge within their orbits, increasing the velocity dispersion. A proper orbital analysis is therefore critical to isolate bona fide bulge variables. Finally, bulge RR Lyrae seem to trace a spheroidal component, although the current data do now allow us to reach a firm conclusion about the spatial distribution. △ Less

Submitted 16 May, 2024; v1 submitted 14 May, 2024; originally announced May 2024.

Comments: 14 pages, 13 figures, accepted by A&A

Measuring the CMB primordial B-modes with Bolometric Interferometry

Authors: A. Mennella, P. Ade, A. Almela, G. Amico, L. H. Arnaldi, J. Aumont, S. Banfi, E. S. Battistelli, B. Bélier, L. Bergé, J. -Ph. Bernard, P. de Bernardis, M. Bersanelli, J. Bonaparte, J. D. Bonilla, E. Bunn, D. Buzi, F. Cacciotti, D. Camilieri, F. Cavaliere, P. Chanial, C. Chapron, L. Colombo, F. Columbro, A. Coppolecchia , et al. (89 additional authors not shown)

Abstract: The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest fo… ▽ More The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest for the faint signal of the primordial B-modes. A unique feature is the so-called "spectral imaging", i.e., the ability to recover the sky signal in several sub-bands within the physical band during data analysis. This feature provides an in-band spectral resolution of Δν/ν \sim 0.04 that is unattainable by a traditional imager. This is a key tool for controlling the Galactic foregrounds contamination. In this paper, we describe the principles of bolometric interferometry, the current status of the QUBIC experiment and future prospects. △ Less

Submitted 5 November, 2023; originally announced November 2023.

Comments: To appear in Proc. of the mm Universe 2023 conference, Grenoble (France), June 2023, published by F. Mayet et al. (Eds), EPJ Web of conferences, EDP Sciences

The treasure behind the haystack: MUSE analysis of five recently discovered globular clusters

Authors: F. Gran, G. Kordopatis, M. Zoccali, V. Hill, I. Saviane, C. Navarrete, A. Rojas-Arriagada, J. Carballo-Bello, J. Hartke, E. Valenti, R. Contreras Ramos, M. De Leo, S. Fabbro

Abstract: After the second data release of Gaia, the number of new globular cluster candidates has increased importantly. However, most of them need to be properly characterised, both spectroscopically and photometrically, by means of radial velocities, metallicities, and deeper photometric observations. Our goal is to provide an independent confirmation of the cluster nature of Gran 4, a recently discovere… ▽ More After the second data release of Gaia, the number of new globular cluster candidates has increased importantly. However, most of them need to be properly characterised, both spectroscopically and photometrically, by means of radial velocities, metallicities, and deeper photometric observations. Our goal is to provide an independent confirmation of the cluster nature of Gran 4, a recently discovered globular cluster, with follow-up spectroscopic observations. The derived radial velocity for individual stars, coupled with proper motions, allows us to isolate cluster members from field stars, while the analysis of their spectra allows us to derive metallicities. By including in the analysis the recently confirmed clusters Gran 1, 2, 3, and 5, we aim to completely characterise the sample presented in Gran et al. 2022. Using Gaia DR3 and VVV catalogue data and MUSE@VLT observations, we performed a selection of cluster members based on their proper motions, radial velocities and their position in colour-magnitude diagrams. Furthermore, full spectral synthesis was performed on the cluster members, extracting surface parameters and metallicity from MUSE spectra. Finally, a completeness estimation was performed on the total globular cluster population of the Milky Way. We confirm the nature of Gran 4, a newly discovered globular cluster behind the Galactic bulge, with a mean radial velocity of ${\rm RV} = -265.28 \pm 3.92$ km s$^{-1}$ and a mean metallicity of ${\rm [Fe/H] = -1.72 \pm 0.32}$ dex. Additionally, independent measurements of the metallicities were derived for Gran 1, 2, 3, and 5. We also revise the observational lower mass limit for a globular cluster to survive in the bulge/disk environment. We estimate that $\sim 12-26$ globular clusters have still to be discovered on the other side of the Galaxy (i.e., behind the bulge/bar/disk), up to 20 kpc. △ Less

Submitted 15 October, 2023; originally announced October 2023.

Comments: 8 pages, 5 figures, appendix: 5 tables and 1 figure. Accepted for publication for A&A

Surviving the Waves: evidence for a Dark Matter cusp in the tidally disrupting Small Magellanic Cloud

Authors: Michele De Leo, Justin I. Read, Noelia E. D. Noel, Denis Erkal, Pol Massana, Ricardo Carrera

Abstract: We use spectroscopic data for ${\sim}6,000$ Red Giant Branch (RGB) stars in the Small Magellanic Cloud (SMC), together with proper motion data from \textit{Gaia} Early Data Release 3 (EDR3), to build a mass model of the SMC. We test our Jeans mass modelling method (\textsc{Binulator}+\textsc{GravSphere}) on mock data for an SMC-like dwarf undergoing severe tidal disruption, showing that we are abl… ▽ More We use spectroscopic data for ${\sim}6,000$ Red Giant Branch (RGB) stars in the Small Magellanic Cloud (SMC), together with proper motion data from \textit{Gaia} Early Data Release 3 (EDR3), to build a mass model of the SMC. We test our Jeans mass modelling method (\textsc{Binulator}+\textsc{GravSphere}) on mock data for an SMC-like dwarf undergoing severe tidal disruption, showing that we are able to successfully remove tidally unbound interlopers, recovering the Dark Matter density and stellar velocity anisotropy profiles within our 95\% confidence intervals. We then apply our method to real SMC data, finding that the stars of the cleaned sample are isotropic at all radii (at 95\% confidence), and that the inner Dark Matter density profile is dense, $ρ_{\rm DM}(150\,{\rm pc}) = 2.81_{-1.07}^{+0.72}\times 10^8 M_{\odot} \rm kpc^{-3} $, consistent with a $Λ$ Cold Dark Matter ($Λ$CDM) cusp at least down to 400\,pc from the SMC's centre. Our model gives a new estimate of the SMC's total mass within 3\,kpc ($M_{\rm tot} \leq 3\,{\rm kpc})$ of $2.34\pm0.46 \times 10^9 M_{\odot}$. We also derive an astrophysical \textquote{$J$-factor} of $19.22\pm0.14$\, GeV$^2$\,cm$^{-5}$ and a \textquote{$D$-factor} of $18.80\pm0.03$\, GeV$^2$\,cm$^{-5}$, making the SMC a promising target for Dark Matter annihilation and decay searches. Finally, we combine our findings with literature measurements to test models in which Dark Matter is \textquote{heated up} by baryonic effects. We find good qualitative agreement with the Di Cintio et al. 2014 model but we deviate from the Lazar et al. 2020 model at high $M_*/M_{200} > 10^{-2}$. We provide a new, analytic, density profile that reproduces Dark Matter heating behaviour over the range $10^{-5} < M_*/M_{200} < 10^{-1}$. △ Less

Submitted 15 March, 2023; originally announced March 2023.

Comments: 18 pages, 17 figures, submitted to MNRAS

Status of QUBIC, the Q&U Bolometer for Cosmology

Authors: L. Mousset, P. Ade, A. Almela, G. Amico, L. H. Arnaldi, J. Aumont, S. Banfi, E. S. Battistelli, B. Bélier, L. Bergé, J. -Ph. Bernard, P. de Bernardis, M. Bersanelli, J. Bonaparte, J. D. Bonilla, E. Bunn, D. Buzi, D. Camilieri, F. Cavaliere, P. Chanial, C. Chapron, S. Colombo, F. Columbro, A. Coppolecchia, B. Costanza , et al. (86 additional authors not shown)

Abstract: The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregr… ▽ More The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematics with those of bolometric detectors in terms of wide-band, background-limited sensitivity. △ Less

Submitted 6 October, 2022; originally announced October 2022.

Comments: Contribution to the 2022 Cosmology session of the 33rd Rencontres de Blois. arXiv admin note: substantial text overlap with arXiv:2203.08947

QUBIC IV: Performance of TES Bolometers and Readout Electronics

Authors: M. Piat, G. Stankowiak, E. S. Battistelli, P. de Bernardis, G. D Alessandro, M. De Petris, L. Grandsire, J. -Ch. Hamilton, T. D. Hoang, S. Marnieros, S. Masi, A. Mennella, L. Mousset, C. O Sullivan, D. Prele, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade, J. G. Alberro, A. Almela, G. Amico, L. H. Arnaldi , et al. (104 additional authors not shown)

Abstract: A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are… ▽ More A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are controlled and amplified by an SiGe application specific integrated circuit at 40 K. We report the performance of this readout chain and the characterization of the TES. The readout system has been functionally tested and characterized in the lab and in QUBIC. The low noise amplifier demonstrated a white noise level of 0.3 nV.Hz^-0.5. Characterizations of the QUBIC detectors and readout electronics includes the measurement of I-V curves, time constant and the noise equivalent power. The QUBIC TES bolometer array has approximately 80% detectors within operational parameters. It demonstrated a thermal decoupling compatible with a phonon noise of about 5.10^-17 W.Hz^-0.5 at 410 mK critical temperature. While still limited by microphonics from the pulse tubes and noise aliasing from readout system, the instrument noise equivalent power is about 2.10^-16 W.Hz^-0.5, enough for the demonstration of bolometric interferometry. △ Less

Submitted 20 October, 2021; v1 submitted 17 January, 2021; originally announced January 2021.

Comments: Accepted for publication in JCAP

QUBIC I: Overview and ScienceProgram

Authors: J. -Ch. Hamilton, L. Mousset, E. S. Battistelli, M. -A. Bigot-Sazy, P. Chanial, R. Charlassier, G. D'Alessandro, P. de Bernardis, M. De Petris, M. M. Gamboa Lerena, L. Grandsire, S. Lau, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, M. Piat, G. Riccardi, C. Scóccola, M. Stolpovskiy, A. Tartari, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade , et al. (105 additional authors not shown)

Abstract: The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical fo… ▽ More The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematic effects with those of bolometric detectors in terms of wide-band, background-limited sensitivity. The QUBIC synthesized beam has a frequency-dependent shape that results in the ability to produce maps of the CMB polarization in multiple sub-bands within the two physical bands of the instrument (150 and 220 GHz). These features make QUBIC complementary to other instruments and makes it particularly well suited to characterize and remove Galactic foreground contamination. In this article, first of a series of eight, we give an overview of the QUBIC instrument design, the main results of the calibration campaign, and present the scientific program of QUBIC including not only the measurement of primordial B-modes, but also the measurement of Galactic foregrounds. We give forecasts for typical observations and measurements: with three years of integration on the sky and assuming perfect foreground removal as well as stable atmospheric conditions from our site in Argentina, our simulations show that we can achieve a statistical sensitivity to the effective tensor-to-scalar ratio (including primordial and foreground B-modes) $σ(r)=0.015$. △ Less

Submitted 26 August, 2021; v1 submitted 4 November, 2020; originally announced November 2020.

Comments: 34 pages, 16 figures, accepted for publication by JCAP. Overview paper for a series of 8 QUBIC articles special JCAP edition dedicated to QUBIC

QUBIC II: Spectro-Polarimetry with Bolometric Interferometry

Authors: L. Mousset, M. M. Gamboa Lerena, E. S. Battistelli, P. de Bernardis, P. Chanial, G. D'Alessandro, G. Dashyan, M. De Petris, L. Grandsire, J. -Ch. Hamilton, F. Incardona, S. Landau, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, M. Piat, G. Ricciardi, C. G. Scóccola, M. Stolpovskiy, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni , et al. (106 additional authors not shown)

Abstract: Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foreg… ▽ More Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q \& U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust mapping and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. We conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC. △ Less

Submitted 28 March, 2022; v1 submitted 28 October, 2020; originally announced October 2020.

Comments: 27 pages, 18 figures. Accepted by JCAP on July 6, 2021. Second paper of series of 8 in a special JCAP edition on QUBIC

QUBIC VII: The feedhorn-switch system of the technological demonstrator

Authors: F. Cavaliere, A. Mennella, M. Zannoni, P. Battaglia, E. S. Battistelli, D. Burke, G. D'Alessandro, P. de Bernardis, M. De Petris, C. Franceschet, L. Grandsire, J. -Ch. Hamilton, B. Maffei, E. Manzan, S. Marnieros, S. Masi, C. O'Sullivan, A. Passerini, F. Pezzotta, M. Piat, A. Tartari, S. A. Torchinsky, D. Viganò, F. Voisin, P. Ade , et al. (106 additional authors not shown)

Abstract: We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration… ▽ More We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration. We manufactured the horns in aluminum platelets milled by photo-chemical etching and mechanically tightened with screws. The switches are based on steel blades that open and close the wave-guide between the back-to-back horns and are operated by miniaturized electromagnets. We also show the current development status of the feedhorn-switch system for the QUBIC full instrument, based on an array of 400 horn-switch assemblies. △ Less

Submitted 1 April, 2022; v1 submitted 28 August, 2020; originally announced August 2020.

Comments: 30 pages, 28 figures. Accepted for submission to JCAP

QUBIC VI: cryogenic half wave plate rotator, design and performances

Authors: G. D'Alessandro, L. Mele, F. Columbro, G. Amico, E. S. Battistelli, P. de Bernardis, A. Coppolecchia, M. De Petris, L. Grandsire, J. -Ch. Hamilton, L. Lamagna, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, A. Paiella, F. Piacentini, M. Piat, G. Pisano, G. Presta, A. Tartari, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade , et al. (104 additional authors not shown)

Abstract: Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used t… ▽ More Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used technique is the Stokes Polarimetry that uses a rotating half-wave plate (HWP) and a linear polarizer to separate and modulate the polarization components with low residual cross-polarization. This paper describes the QUBIC Stokes Polarimeter highlighting its design features and its performances. A common systematic with these devices is the generation of large spurious signals synchronous with the rotation and proportional to the emissivity of the optical elements. A key feature of the QUBIC Stokes Polarimeter is to operate at cryogenic temperature in order to minimize this unwanted component. Moving efficiently this large optical element at low temperature constitutes a big engineering challenge in order to reduce friction power dissipation. Big attention has been given during the designing phase to minimize the differential thermal contractions between parts. The rotation is driven by a stepper motor placed outside the cryostat to avoid thermal load dissipation at cryogenic temperature. The tests and the results presented in this work show that the QUBIC polarimeter can easily achieve a precision below 0.1° in positioning simply using the stepper motor precision and the optical absolute encoder. The rotation induces only few mK of extra power load on the second cryogenic stage (~ 8 K). △ Less

Submitted 19 November, 2020; v1 submitted 24 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC to be submitted to a special issue of JCAP

QUBIC V: Cryogenic system design and performance

Authors: S. Masi, E. S. Battistelli, P. de Bernardis, C. Chapron, F. Columbro, G. D'Alessandro, M. De Petris, L. Grandsire, J. -Ch. Hamilton, S. Marnieros, L. Mele, A. May, A. Mennella, C. O'Sullivan, A. Paiella, F. Piacentini, M. Piat, L. Piccirillo, G. Presta, A. Schillaci, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni , et al. (104 additional authors not shown)

Abstract: Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interfe… ▽ More Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes. △ Less

Submitted 25 August, 2021; v1 submitted 24 August, 2020; originally announced August 2020.

Comments: This is one of a series of papers on the QUBIC experiment status - This version of the paper matches the one accepted for publication on Journal of Cosmology and Astroparticle Physics

QUBIC VIII: Optical design and performance

Authors: C. O'Sullivan, M. De Petris, G. Amico, E. S. Battistelli, D. Burke, D. Buzi, C. Chapron, L. Conversi, G. D'Alessandro, P. de Bernardis, M. De Leo, D. Gayer, L. Grandsire, J. -Ch. Hamilton, S. Marnieros, S. Masi, A. Mattei, A. Mennella, L. Mousset, J. D. Murphy, A. Pelosi, M. Perciballi, M. Piat, S. Scully, A. Tartari , et al. (104 additional authors not shown)

Abstract: The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or p… ▽ More The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or planned experiments using the novel technique of bolometric interferometry. This technique takes advantage of the sensitivity of an imager and the systematic error control of an interferometer. A cold reflective optical combiner superimposes there-emitted beams from 400 aperture feedhorns on two focal planes. A shielding system composedof a fixed groundshield, and a forebaffle that moves with the instrument, limits the impact of local contaminants. The modelling, design, manufacturing and preliminary measurements of the optical components are described in this paper. △ Less

Submitted 25 August, 2021; v1 submitted 23 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC to be published in a special issue of JCAP. Accepted for publication

QUBIC III: Laboratory Characterization

Authors: S. A. Torchinsky, J. -Ch. Hamilton, M. Piat, E. S. Battistelli, C. Chapron, G. D'Alessandro, P. de Bernardis, M. De Petris, M. M. Gamboa Lerena, M. González, L. Grandsire, S. Masi, S. Marnieros, A. Mennella, L. Mousset, J. D. Murphy, D. Prêle, G. Stankowiak, C. O'Sullivan, A. Tartari, J. -P. Thermeau, F. Voisin, M. Zannoni, P. Ade, J. G. Alberro , et al. (103 additional authors not shown)

Abstract: A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam,… ▽ More A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam, the measurement of interference fringes, and the measurement of polarization performance. A modulated and frequency tunable millimetre-wave source in the telescope far-field is used to simulate a point source. The QUBIC pointing is scanned across the point source to produce beam maps. Polarization modulation is measured using a rotating Half Wave Plate. The measured beam matches well to the theoretical simulations and gives QUBIC the ability to do spectro imaging. The polarization performance is excellent with less than 0.5\% cross-polarization rejection. QUBIC is ready for deployment on the high altitude site at Alto Chorillo, Argentina to begin scientific operations. △ Less

Submitted 15 March, 2022; v1 submitted 23 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC accepted by JCAP for a special issue: https://iopscience.iop.org/journal/1475-7516/page/QUBIC_status_and_forecast

Revealing the tidal scars of the Small Magellanic Cloud

Authors: Michele De Leo, Ricardo Carrera, Noelia E. D. Noel, Justin I. Read, Denis Erkal, Carme Gallart

Abstract: Due to their close proximity, the Large and Small Magellanic Clouds (SMC/LMC) provide natural laboratories for understanding how galaxies form and evolve. With the goal of determining the structure and dynamical state of the SMC, we present new spectroscopic data for $\sim$ 3000 SMC red giant branch stars observed using the AAOmega spectrograph at the Anglo-Australian Telescope. We complement our… ▽ More Due to their close proximity, the Large and Small Magellanic Clouds (SMC/LMC) provide natural laboratories for understanding how galaxies form and evolve. With the goal of determining the structure and dynamical state of the SMC, we present new spectroscopic data for $\sim$ 3000 SMC red giant branch stars observed using the AAOmega spectrograph at the Anglo-Australian Telescope. We complement our data with further spectroscopic measurements from previous studies that used the same instrumental configuration and proper motions from the \textit{Gaia} Data Release 2 catalogue. Analysing the photometric and stellar kinematic data, we find that the SMC centre of mass presents a conspicuous offset from the velocity centre of its associated $\mbox{H\,{\sc i}}$ gas, suggesting that the SMC gas is likely to be far from dynamical equilibrium. Furthermore, we find evidence that the SMC is currently undergoing tidal disruption by the LMC within 2\,kpc of the centre of the SMC, and possibly all the way in to the very core. This is evidenced by a net outward motion of stars from the SMC centre along the direction towards the LMC and apparent tangential anisotropy at all radii. The latter is expected if the SMC is undergoing significiant tidal stripping, as we demonstrate using a suite of $N$-body simulations of the SMC/LMC system disrupting around the Milky Way. These results suggest that dynamical models for the SMC that assume a steady state will need to be revisited. △ Less

Submitted 25 February, 2020; originally announced February 2020.

Comments: Revised version submitted to MNRAS after referee report, 18 pages, 18 figures

QUBIC: the Q & U Bolometric Interferometer for Cosmology

Authors: E. S. Battistelli, P. Ade, J. G. Alberro, A. Almela, G. Amico, L. H. Arnaldi, D. Auguste, J. Aumont, S. Azzoni, S. Banfi, P. Battaglia, A. Baù, B. Bèlier, D. Bennett, L. Bergè, J. -Ph. Bernard, M. Bersanelli, M. -A. Bigot-Sazy, N. Bleurvacq, J. Bonaparte, J. Bonis, A. Bottani, E. Bunn, D. Burke, D. Buzi , et al. (114 additional authors not shown)

Abstract: The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addr… ▽ More The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addresses these requirements using an innovative approach combining the sensitivity of Transition Edge Sensor cryogenic bolometers, with the deep control of systematics characteristic of interferometers. This makes QUBIC unique with respect to others classical imagers experiments devoted to the CMB polarization. In this contribution we report a description of the QUBIC instrument including recent achievements and the demonstration of the bolometric interferometry performed in lab. QUBIC will be deployed at the observation site in Alto Chorrillos, in Argentina at the end of 2019. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Comments: Accepted for publication in the Journal of Low Temperature Physics

QUBIC: using NbSi TESs with a bolometric interferometer to characterize the polarisation of the CMB

Authors: M. Piat, B. Bélier, L. Bergé, N. Bleurvacq, C. Chapron, S. Dheilly, L. Dumoulin, M. González, L. Grandsire, J. -Ch. Hamilton, S. Henrot-Versillé, D. T. Hoang, S. Marnieros, W. Marty, L. Montier, E. Olivieri, C. Oriol, C. Perbost, D. Prêle, D. Rambaud, M. Salatino, G. Stankowiak, J. -P. Thermeau, S. Torchinsky, F. Voisin , et al. (113 additional authors not shown)

Abstract: QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detec… ▽ More QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detectors. QUBIC will be deployed in Argentina, at the Alto Chorrillos mountain site near San Antonio de los Cobres, in the Salta province. The QUBIC detection chain consists in 2048 NbSi Transition Edge Sensors (TESs) cooled to 350mK.The voltage-biased TESs are read out with Time Domain Multiplexing based on Superconducting QUantum Interference Devices (SQUIDs) at 1 K and a novel SiGe Application-Specific Integrated Circuit (ASIC) at 60 K allowing to reach an unprecedented multiplexing (MUX) factor equal to 128. The QUBIC experiment is currently being characterized in the lab with a reduced number of detectors before upgrading to the full instrument. I will present the last results of this characterization phase with a focus on the detectors and readout system. △ Less

Submitted 9 December, 2019; v1 submitted 27 November, 2019; originally announced November 2019.

Comments: Conference proceedings submitted to the Journal of Low Temperature Physics for LTD18

On the nature of a shell of young stars in the outskirts of the Small Magellanic Cloud

Authors: David Martinez-Delgado, A. Katherina Vivas, Eva K. Grebel, Carme Gallart, Adriano Pieres, Cameron P. M. Bell, Paul Zivick, Bertrand Lemasle, L. Clifton Johnson, Julio A. Carballo-Bello, Noelia E. D. Noel, Maria-Rosa L. Cioni, Yumi Choi, Gurtina Besla, Judy Schmidt, Dennis Zaritsky, Robert A. Gruendl, Mark Seibert, David Nidever, Laura Monteagudo, Mateo Monelli, Bernhard Hubl, Roeland van der Marel, Fernando J. Ballesteros, Guy Stringfellow , et al. (13 additional authors not shown)

Abstract: Understanding the evolutionary history of the Magellanic Clouds requires an in-depth exploration and characterization of the stellar content in their outer regions, which ultimately are key to tracing the epochs and nature of past interactions. We present new deep images of a shell-like over-density of stars in the outskirts of the Small Magellanic Cloud (SMC). The shell, also detected in photogra… ▽ More Understanding the evolutionary history of the Magellanic Clouds requires an in-depth exploration and characterization of the stellar content in their outer regions, which ultimately are key to tracing the epochs and nature of past interactions. We present new deep images of a shell-like over-density of stars in the outskirts of the Small Magellanic Cloud (SMC). The shell, also detected in photographic plates dating back to the fifties, is located at ~1.9 degr from the center of the SMC in the north-east direction.The structure and stellar content of this feature were studied with multi-band, optical data from the Survey of the MAgellanic Stellar History (SMASH) carried out with the Dark Energy Camera on the Blanco Telescope at Cerro Tololo Inter-American Observatory. We also investigate the kinematic of the stars in the shell using the Gaia Data Release 2. The shell is composed of a young population with an age ~ 150 Myr, with no contribution from an old population. Thus, it is hard to explain its origin as the remnant of a tidally disrupted stellar system. The spatial distribution of the young main-sequence stars shows a rich sub-structure, with a spiral arm-like feature emanating from the main shell and a separated small arc of young stars close to the globular cluster NGC 362. We find that the absolute g-band magnitude of the shell is M_{g,shell} = -10.78+/- 0.02, with a surface brightness of mu_{g,shell} = 25.81+/- 0.01 mag/arcsec^{2}. We have not found any evidence that this feature is of tidal origin or a bright part of a spiral arm-like structure. Instead, we suggest that the shell formed in a recent star formation event, likely triggered by an interaction with the Large Magellanic Cloud and/or the Milky Way, ~150 Myr ago. △ Less

Submitted 10 July, 2019; v1 submitted 4 July, 2019; originally announced July 2019.

Comments: 16 pages, 14 figures, submitted to Astronomy & Astrophysics

Journal ref: A&A 631, A98 (2019)

QUBIC: Exploring the primordial Universe with the Q\&U Bolometric Interferometer

Authors: Aniello Mennella, Peter Ade, Giorgio Amico, Didier Auguste, Jonathan Aumont, Stefano Banfi, Gustavo Barbaràn, Paola Battaglia, Elia Battistelli, Alessandro Baù, Benoit Bélier, David G. Bennett, Laurent Bergé, Jean Philippe Bernard, Marco Bersanelli, Marie Anne Bigot Sazy, Nathat Bleurvacq, Juan Bonaparte, Julien Bonis, Emory F. Bunn, David Burke, Daniele Buzi, Alessandro Buzzelli, Francesco Cavaliere, Pierre Chanial , et al. (105 additional authors not shown)

Abstract: In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its… ▽ More In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its spectral imaging power, i.e. the ability to separate the signal in various sub-bands within each frequency band. QUBIC will observe the sky in two main frequency bands: 150 GHz and 220 GHz. A technological demonstrator is currently under testing and will be deployed in Argentina during 2019, while the final instrument is expected to be installed during 2020. △ Less

Submitted 23 January, 2019; v1 submitted 30 November, 2018; originally announced December 2018.

Comments: Proceedings of the 2018 ICNFP conference, Crete. Published by Universe arXiv admin note: text overlap with arXiv:1801.03730

Journal ref: Universe 2019, 5, 42

Thermal architecture for the QUBIC cryogenic receiver

Authors: A. J. May, C. Chapron, G. Coppi, G. D'Alessandro, P. de Bernardis, S. Masi, S. Melhuish, M. Piat, L. Piccirillo, A. Schillaci, J. -P. Thermeau, P. Ade, G. Amico, D. Auguste, J. Aumont, S. Banfi, G. Barbara, P. Battaglia, E. Battistelli, A. Bau, B. Belier, D. Bennett, L. Berge, J. -Ph. Bernard, M. Bersanelli , et al. (105 additional authors not shown)

Abstract: QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex opt… ▽ More QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex optical and detector stages to 40 K, 4 K, 1 K and 350 mK using two pulse tube coolers, a novel 4He sorption cooler and a double-stage 3He/4He sorption cooler. We discuss the thermal and mechanical design of the cryostat, modelling and thermal analysis, and laboratory cryogenic testing. △ Less

Submitted 6 November, 2018; originally announced November 2018.

Journal ref: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX. Vol. 10708. International Society for Optics and Photonics, 2018

QUBIC - The Q&U Bolometric Interferometer for Cosmology - A novel way to look at the polarized Cosmic Microwave Background

Authors: A. Mennella, P. A. R. Ade, J. Aumont, S. Banfi, P. Battaglia, E. S. Battistelli, A. Baù, B. Bélier, D. Bennett, L. Bergé, J. Ph. Bernard, M. Bersanelli, M. A. Bigot-Sazy, N. Bleurvacq, G. Bordier, J. Brossard, E. F. Bunn, D. P. Burke, D. Buzi, A. Buzzelli, D. Cammilleri, F. Cavaliere, P. Chanial, C. Chapron, F. Columbro , et al. (83 additional authors not shown)

Abstract: In this paper we describe QUBIC, an experiment that takes up the challenge posed by the detection of primordial gravitational waves with a novel approach, that combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. The so-called "self-calibration" is a technique deeply rooted in the interferometric nature of the instrument… ▽ More In this paper we describe QUBIC, an experiment that takes up the challenge posed by the detection of primordial gravitational waves with a novel approach, that combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. The so-called "self-calibration" is a technique deeply rooted in the interferometric nature of the instrument and allows us to clean the measured data from instrumental effects. The first module of QUBIC is a dual band instrument (150 GHz and 220 GHz) that will be deployed in Argentina during the Fall 2018. △ Less

Submitted 11 January, 2018; originally announced January 2018.

Comments: Presented at the EPS Conference on High Energy Physics, Venice (Italy), 5-12 July 2017 Accepted for publication in conference proceedings

Combining Strong Lensing and Dynamics in Galaxy Clusters: integrating MAMPOSSt within LENSTOOL I. Application on SL2S J02140-0535

Authors: T. Verdugo, M. Limousin, V. Motta, G. A. Mamon, G. Foëx, F. Gastaldello, E. Jullo, A. Biviano, K. Rojas, R. P. Muñoz, R. Cabanac, J. Magaña, J. G. Fernández-Trincado, L. Adame, M. A. De Leo

Abstract: We present a new framework were we simultaneously fit strong lensing (SL) and dynamical data. The SL analysis is based on LENSTOOL, and the dynamical analysis uses MAMPOSSt code, which we have integrated into LENSTOOL. After describing the implementation of this new tool, we apply it on the galaxy group SL2S\,J02140-0535 ($z_{\rm spec}=0.44$), which we have already studied in the past. We use new… ▽ More We present a new framework were we simultaneously fit strong lensing (SL) and dynamical data. The SL analysis is based on LENSTOOL, and the dynamical analysis uses MAMPOSSt code, which we have integrated into LENSTOOL. After describing the implementation of this new tool, we apply it on the galaxy group SL2S\,J02140-0535 ($z_{\rm spec}=0.44$), which we have already studied in the past. We use new VLT/FORS2 spectroscopy of multiple images and group members, as well as shallow X-ray data from \xmm. We confirm that the observed lensing features in SL2S\,J02140-0535 belong to different background sources. One of this sources is located at $z_{\rm spec}$ = 1.017 $\pm$ 0.001, whereas the other source is located at $z_{\rm spec}$ = 1.628 $\pm$ 0.001. With the analysis of our new and our previously reported spectroscopic data, we find 24 secure members for SL2S\,J02140-0535. Both data sets are well reproduced by a single NFW mass profile: the dark matter halo coincides with the peak of the light distribution, with scale radius, concentration, and mass equal to $r_s$ =$82^{+44}_{-17}$ kpc , $c_{200}$ = $10.0^{+1.7}_{-2.5}$, and $M_{200}$ = $1.0^{+0.5}_{-0.2}$ $\times$ 10$^{14}$M$_{\odot}$ respectively. These parameters are better constrained when we fit simultaneously SL and dynamical information. The mass contours of our best model agrees with the direction defined by the luminosity contours and the X-ray emission of SL2S\,J02140-0535. The simultaneous fit lowers the error in the mass estimate by 0.34 dex, when compared to the SL model, and in 0.15 dex when compared to the dynamical method.The combination of SL and dynamics tools yields a more accurate probe of the mass profile of SL2S\,J02140-0535 up to $r_{200}$. However, there is tension between the best elliptical SL model and the best spherical dynamical model. △ Less

Submitted 12 August, 2016; originally announced August 2016.

Comments: Accepted by Astronomy and Astrophysics. A version with better resolution in the images is available at: https://goo.gl/nzypP3

Journal ref: A&A 595, A30 (2016)

Testing microvariability in quasar differential light curves using several field stars

Authors: J. A. de Diego, J. Polednikova, A. Bongiovanni, A. M. Pérez García, M. A. De Leo, T. Verdugo, J. Cepa

Abstract: Microvariability consists in small time scale variations of low amplitude in the photometric light curves of quasars, and represents an important tool to investigate their inner core. Detection of quasar microvariations is challenging for their non-periodicity, as well as the need for high monitoring frequency and high signal-to-noise ratio. Statistical tests developed for the analysis of quasar d… ▽ More Microvariability consists in small time scale variations of low amplitude in the photometric light curves of quasars, and represents an important tool to investigate their inner core. Detection of quasar microvariations is challenging for their non-periodicity, as well as the need for high monitoring frequency and high signal-to-noise ratio. Statistical tests developed for the analysis of quasar differential light curves usually show either low power or low reliability, or both. In this paper we compare two statistical procedures that include several stars to perform tests with enhanced power and high reliability. We perform light curve simulations of variable quasars and non-variable stars, and analyze them with statistical procedures developed from the F-test and the analysis of variance. The results show a large improvement in the power of both statistical probes, and a larger reliability, when several stars are included in the analysis. The results from the simulations agree with those obtained from observations of real quasars. The high power and high reliability of the tests discussed in this paper improve the results that can be obtained from short and long time scale variability studies. These techniques are not limited to quasar variability; on the contrary, they can be easily implemented to other sources such as variable stars. Their applications to future research and to the analysis of large field photometric monitoring archives can reveal new variable sources. △ Less

Submitted 8 May, 2015; originally announced May 2015.

Comments: Accepted in The Astronomical Journal, 16 pages, 7 figures

Frontier Fields : Combining HST, VLT and Spitzer data to explore the $z$$\sim$8 Universe behind the lensing cluster MACS0416$-$2403

Authors: N. Laporte, A. Streblyanska, S. Kim, R. Pelló, F. E. Bauer, D. Bina, G. Brammer, M. A. De Leo, L. Infante, I. Pérez-Fournon

Abstract: (Abridged) The HST Frontier Fields project started at the end of 2013 with the aim of providing extremely deep images of 6 massive galaxy clusters. One of the main goals of this program is to push several telescopes to their limits in order to provide the best current view of the earliest stages of the Universe. We present a detailed analysis of $z$$\sim$8 objects behind the HFFs lensing cluster,… ▽ More (Abridged) The HST Frontier Fields project started at the end of 2013 with the aim of providing extremely deep images of 6 massive galaxy clusters. One of the main goals of this program is to push several telescopes to their limits in order to provide the best current view of the earliest stages of the Universe. We present a detailed analysis of $z$$\sim$8 objects behind the HFFs lensing cluster, MACS0416-2403, combining 0.3-1.6 $μ$m imaging from HST, ground-based $K_s$ imaging from VLT HAWK-I, and 3.6 $μ$m and 4.5 $μ$m Spitzer Space Telescope. We apply the classical Lyman Break technique, combining non-detection criteria and color-selection. In order to avoid contamination by mid-$z$ interlopers, we require a strong break between optical and near infrared data. The luminosity function at $z$$\sim$8 is computed using a MC method taking advantage of the SED-fitting results. A piece of cautionary information is gleaned from new deep optical photometry of a previously identified $z$$\sim$8 galaxy in this cluster, which is now firmly detected as a mid-$z$ interloper with a strong $\approx1.5$ mag Balmer break (between F606W and F125W). Using the SED of this interloper, we estimate the contamination rate of our MACS0416$-$2403 sample, as well as for previous samples in Abell 2744 based on HFF data. Our selection recovers 4 robust objects with m$_{F160W}$ ranging from 26.0 to 27.9 AB and located in modest amplification regions ($μ<$2.4). Two of the objects display a secondary break between the IRAC 3.6 $μ$m and 4.5 $μ$m bands which could be associated to the Balmer break or emission lines at $z$$\sim$8. The candidates generally have star formation rates around $\sim$10 M$_{\odot}$/yr and sizes ranging from 0.2 to 0.5 kpc, in good agreement with previous observations and expectations for objects in the early Universe. △ Less

Submitted 4 December, 2014; v1 submitted 2 December, 2014; originally announced December 2014.

Comments: 11 pages, 8 figures, accepted for publication in A&A

Journal ref: A&A 575, A92 (2015)

Filter Induced Bias in Lyα Emitter Surveys: A Comparison Between Standard and Tunable Filters. Gran Telescopio Canarias Preliminary Results

Authors: J. A. de Diego, M. A. De Leo, J. Cepa, A. Bongiovanni, T. Verdugo, M. Sánchez-Portal, J. I. González-Serrano

Abstract: Lyman-alpha emitter (LAE) surveys have successfully used the excess in a narrow-band filter compared to a nearby broad-band image to find candidates. However, the odd spectral energy distribution (SED) of LAEs combined with the instrumental profile have important effects on the properties of the candidate samples extracted from these surveys. We investigate the effect of the bandpass width and the… ▽ More Lyman-alpha emitter (LAE) surveys have successfully used the excess in a narrow-band filter compared to a nearby broad-band image to find candidates. However, the odd spectral energy distribution (SED) of LAEs combined with the instrumental profile have important effects on the properties of the candidate samples extracted from these surveys. We investigate the effect of the bandpass width and the transmission profile of the narrow-band filters used for extracting LAE candidates at redshifts z ~ 6.5 through Monte Carlo simulations, and we present pilot observations to test the performance of tunable filters to find LAEs and other emission-line candidates. We compare the samples obtained using a narrow ideal-rectangular-filter, the Subaru NB921 narrow-band filter, and sweeping across a wavelength range using the ultra-narrow-band tunable filters of the instrument OSIRIS, installed at the 10.4m Gran Telescopio Canarias. We use this instrument for extracting LAE candidates from a small set of real observations. Broad-band data from the Subaru, HST and Spitzer databases were used for fiting SEDs to calculate photometric redshifts and to identify interlopers. Narrow-band surveys are very efficient to find LAEs in large sky areas, but the samples obtained are not evenly distributed in redshift along the filter bandpass, and the number of LAEs with equivalent widths < 60 angstroms can be underestimated. These biased results do not appear in samples obtained using ultra-narrow-band tunable filters. However, the field size of tunable filters is restricted because of the variation of the effective wavelength across the image. Thus narrow-band and ultra-narrow-band surveys are complementary strategies to investigate high-redshift LAEs. △ Less

Submitted 6 August, 2013; originally announced August 2013.

Comments: 26 pages, 12 figures, 7 tables. To be published in The Astronomical Journal

Looking for the first galaxies: Lensing or blank fields?

Authors: A. Maizy, J. Richard, M. A. De Leo, R. Pello, J. P. Kneib

Abstract: The identification and study of the first galaxies remains one of the most exciting topics in observational cosmology. The determination of the best possible observing strategies is a very important choice in order to build up a representative sample of spectroscopically confirmed sources at high-z (z>7), beyond the limits of present-day observations. This paper is intended to precisely adress t… ▽ More The identification and study of the first galaxies remains one of the most exciting topics in observational cosmology. The determination of the best possible observing strategies is a very important choice in order to build up a representative sample of spectroscopically confirmed sources at high-z (z>7), beyond the limits of present-day observations. This paper is intended to precisely adress the relative efficiency of lensing and blank fields in the identification and study of galaxies at 6<z<12. The detection efficiency and field-to-field variance are estimated from direct simulations of both blank and lensing fields observations. The presence of a strong-lensing cluster along the line of sight has a dramatic effect on the number of observed sources, with a positive magnification bias in typical ground-based ``shallow'' surveys (AB<~25.5). The positive magnification bias increases with the redshift of sources and decreases with both depth of the survey and the size of the surveyed area. The maximum efficiency is reached for lensing clusters at z~0.1-0.3. Observing blank fields in shallow surveys is particularly inefficient as compared to lensing fields if the UV LF for LBGs is strongly evolving at z>~7. Also in this case, the number of z>8 sources expected at the typical depth of JWST (AB~28-29) is much higher in lensing than in blank fields (e.g. a factor of ~10 for AB<~28). Blank field surveys with a large field of view are needed to prove the bright end of the LF at z>6-7, whereas lensing clusters are particularly useful for exploring the mid to faint end of the LF. △ Less

Submitted 26 October, 2009; originally announced October 2009.

Comments: 17 pages, 13 figures, accepted for publication in A&A