-
The equilibrium shape of (65) Cybele: primordial or relic of a large impact?
Authors:
M. Marsset,
M. Brož,
J. Vermersch,
N. Rambaux,
M. Ferrais,
M. Viikinkoski,
J. Hanuš,
E. Jehin,
E. Podlewska-Gaca,
P. Bartczak,
G. Dudzinski,
B. Carry,
P. Vernazza,
R. Szakáts,
R. Duffard,
A. Jones,
D. Molina,
T. Santana-Ros,
Z. Benkhaldoun,
M. Birlan,
C. Dumas,
R. Fétick,
T. Fusco,
L. Jorda,
F. Marchis
, et al. (2 additional authors not shown)
Abstract:
Cybele asteroids constitute an appealing reservoir of primitive material genetically linked to the outer Solar System, and the physical properties of the largest members can be readily accessed by large telescopes. We took advantage of the bright apparition of (65) Cybele in July and August 2021 to acquire high-angular-resolution images and optical light curves of the asteroid with which we aim to…
▽ More
Cybele asteroids constitute an appealing reservoir of primitive material genetically linked to the outer Solar System, and the physical properties of the largest members can be readily accessed by large telescopes. We took advantage of the bright apparition of (65) Cybele in July and August 2021 to acquire high-angular-resolution images and optical light curves of the asteroid with which we aim to analyse its shape and bulk properties. 7 series of images acquired with VLT/SPHERE were combined with optical light curves to reconstruct the shape of the asteroid using the ADAM, MPCD, and SAGE algorithms. The origin of the shape was investigated by means of N-body simulations. Cybele has a volume-equivalent diameter of 263+/-3km and a bulk density of 1.55+/-0.19g.cm-3. Notably, its shape and rotation state are closely compatible with those of a Maclaurin equilibrium figure. The lack of a collisional family associated with Cybele and the higher bulk density of that body with respect to other large P-type asteroids suggest that it never experienced any large disruptive impact followed by rapid re-accumulation. This would imply that its present-day shape represents the original one. However, numerical integration of the long-term dynamical evolution of a hypothetical family shows that it is dispersed by gravitational perturbations and chaotic diffusion over Gyrs of evolution. The very close match between Cybele and an equilibrium figure opens up the possibility that D>260km small bodies from the outer Solar System all formed at equilibrium. However, we cannot rule out an old impact as the origin of the equilibrium shape. Cybele itself is found to be dynamically unstable, implying that it was recently (<1Ga) placed on its current orbit either through slow diffusion from a relatively stable orbit in the Cybele region or, less likely, from an unstable, JFC orbit in the planet-crossing region.
△ Less
Submitted 1 December, 2022;
originally announced December 2022.
-
(216) Kleopatra, a low density critically rotating M-type asteroid
Authors:
F. Marchis,
L. Jorda,
P. Vernazza,
M. Brož,
J. Hanuš,
M. Ferrais,
F. Vachier,
N. Rambaux,
M. Marsset,
M. Viikinkoski,
E. Jehin,
S. Benseguane,
E. Podlewska-Gaca,
B. Carry,
A. Drouard,
S. Fauvaud,
M. Birlan,
J. Berthier,
P. Bartczak,
C. Dumas,
G. Dudzinski,
J. Durech,
J. Castillo-Rogez,
F. Cipriani,
F. Colas
, et al. (14 additional authors not shown)
Abstract:
Context. The recent estimates of the 3D shape of the M/Xe-type triple asteroid system (216) Kleopatra indicated a density of 5 g.cm$^{-3}$. Such a high density implies a high metal content and a low porosity which is not easy to reconcile with its peculiar dumbbell shape. Aims. Given the unprecedented angular resolution of the VLT/SPHERE/ZIMPOL camera, we aim to constrain the mass and the shape of…
▽ More
Context. The recent estimates of the 3D shape of the M/Xe-type triple asteroid system (216) Kleopatra indicated a density of 5 g.cm$^{-3}$. Such a high density implies a high metal content and a low porosity which is not easy to reconcile with its peculiar dumbbell shape. Aims. Given the unprecedented angular resolution of the VLT/SPHERE/ZIMPOL camera, we aim to constrain the mass and the shape of Kleopatra with high accuracy, hence its density. Methods. We combined our new VLT/SPHERE observations of Kleopatra recorded in 2017 and 2018 with archival data, as well as lightcurve, occultation, and delay-Doppler images, to derive its 3D shape model using two different algorithms (ADAM, MPCD). Furthermore, an N-body dynamical model allowed us to retrieve the orbital elements of the two moons as explained in the accompanying paper. Results. The shape of Kleopatra is very close to an equilibrium dumbbell figure with two lobes and a thick neck. Its volume equivalent diameter (118.75$\pm$1.40) km and mass (2.97$\pm$0.32) 10$^{18}$ kg imply a bulk density of (3.38$\pm$0.50) g cm$^{-3}$. Such a low density for a supposedly metal-rich body indicates a substantial porosity within the primary. This porous structure along with its near-equilibrium shape is compatible with a formation scenario including a giant impact followed by reaccumulation. Kleopatra's current rotation period and dumbbell shape imply that it is in a critically rotating state. The low effective gravity along the equator of the body, together with the equatorial orbits of the moons and possibly rubble-pile structure, opens the possibility that the moons formed via mass shedding. Conclusions. Kleopatra is a puzzling multiple system due to the unique characteristics of the primary. It deserves particular attention in the future, with the Extremely Large Telescopes and possibly a dedicated space mission.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
-
An advanced multipole model for (216) Kleopatra triple system
Authors:
M. Brož,
F. Marchis,
L. Jorda,
J. Hanuš,
P. Vernazza,
M. Ferrais,
F. Vachier,
N. Rambaux,
M. Marsset,
M. Viikinkoski,
E. Jehin,
S. Benseguane,
E. Podlewska-Gaca,
B. Carry,
A. Drouard,
S. Fauvaud,
M. Birlan,
J. Berthier,
P. Bartczak,
C. Dumas,
G. Dudziński,
J. Ďurech,
J. Castillo-Rogez,
F. Cipriani,
F. Colas
, et al. (15 additional authors not shown)
Abstract:
To interpret adaptive-optics observations of (216) Kleopatra, we need to describe an evolution of multiple moons, orbiting an extremely irregular body and including their mutual interactions. Such orbits are generally non-Keplerian and orbital elements are not constants. Consequently, we use a modified $N$-body integrator, which was significantly extended to include the multipole expansion of the…
▽ More
To interpret adaptive-optics observations of (216) Kleopatra, we need to describe an evolution of multiple moons, orbiting an extremely irregular body and including their mutual interactions. Such orbits are generally non-Keplerian and orbital elements are not constants. Consequently, we use a modified $N$-body integrator, which was significantly extended to include the multipole expansion of the gravitational field up to the order $\ell = 10$. Its convergence was verified against the `brute-force' algorithm. We computed the coefficients $C_{\ell m},S_{\!\ell m}$ for Kleopatra's shape, assuming a~constant bulk density. For solar-system applications, it was also necessary to implement a variable distance and geometry of observations. Our $χ^2$ metric then accounts for the absolute astrometry, the relative astrometry (2nd moon with respect to 1st), angular velocities, and also silhouettes, constraining the pole orientation. This allowed us to derive the orbital elements of Kleopatra's two moons. Using both archival astrometric data and new VLT/SPHERE observations (ESO LP 199.C-0074), we were able to identify the true periods of the moons, $P_1 = (1.822359\pm0.004156)\,{\rm d}$, $P_2 = (2.745820\pm0.004820)\,{\rm d}$. They orbit very close to the 3:2 mean-motion resonance, but their osculating eccentricities are too small compared to other perturbations (multipole, mutual), so that regular librations of the critical argument are not present. The resulting mass of Kleopatra, $m_1 = (1.49\pm0.16)\cdot10^{-12}\,M_\odot$ or $2.97\cdot10^{18}\,{\rm kg}$, is significantly lower than previously thought. An implication explained in the accompanying paper (Marchis et al.) is that (216) Kleopatra is a critically rotating body.
△ Less
Submitted 19 May, 2021;
originally announced May 2021.
-
Evidence for differentiation of the most primitive small bodies
Authors:
B. Carry,
P. Vernazza,
F. Vachier,
M. Neveu,
J. Berthier J. Hanus,
M. Ferrais,
L. Jorda,
M. Marsset,
M. Viikinkoski,
P. Bartczak,
R. Behrend,
Z. Benkhaldoun,
M. Birlan,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
A. Drouard,
G. P. Dudzinski,
J. Desmars,
C. Dumas,
J. Durech,
R. Fetick,
T. Fusco,
J. Grice,
E. Jehin
, et al. (18 additional authors not shown)
Abstract:
Dynamical models of Solar System evolution have suggested that P-/D-type volatile-rich asteroids formed in the outer Solar System and may be genetically related to the Jupiter Trojans, the comets and small KBOs. Indeed, their spectral properties resemble that of anhydrous cometary dust. High-angular-resolution images of P-type asteroid (87) Sylvia with VLT/SPHERE were used to reconstruct its 3D sh…
▽ More
Dynamical models of Solar System evolution have suggested that P-/D-type volatile-rich asteroids formed in the outer Solar System and may be genetically related to the Jupiter Trojans, the comets and small KBOs. Indeed, their spectral properties resemble that of anhydrous cometary dust. High-angular-resolution images of P-type asteroid (87) Sylvia with VLT/SPHERE were used to reconstruct its 3D shape, and to study the dynamics of its two satellites. We also model Sylvia's thermal evolution. The shape of Sylvia appears flattened and elongated. We derive a volume-equivalent diameter of 271 +/- 5 km, and a low density of 1378 +/- 45 kg.m-3. The two satellites orbit Sylvia on circular, equatorial orbits. The oblateness of Sylvia should imply a detectable nodal precession which contrasts with the fully-Keplerian dynamics of the satellites. This reveals an inhomogeneous internal structure, suggesting that Sylvia is differentiated. Sylvia's low density and differentiated interior can be explained by partial melting and mass redistribution through water percolation. The outer shell would be composed of material similar to interplanetary dust particles (IDPs) and the core similar to aqueously altered IDPs or carbonaceous chondrite meteorites such as the Tagish Lake meteorite. Numerical simulations of the thermal evolution of Sylvia show that for a body of such size, partial melting was unavoidable due to the decay of long-lived radionuclides. In addition, we show that bodies as small as 130-150 km in diameter should have followed a similar thermal evolution, while smaller objects, such as comets and the KBO Arrokoth, must have remained pristine, in agreement with in situ observations of these bodies. NASA Lucy mission target (617) Patroclus (diameter~140 km) may, however, be differentiated.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
Binary asteroid (31) Euphrosyne: Ice-rich and nearly spherical
Authors:
B. Yang,
J. Hanus,
B. Carry,
P. Vernazza,
M. Broz,
F. Vachier,
N. Rambaux,
M. Marsset,
O. Chrenko,
P. Sevecek,
M. Viikinkoski,
E. Jehin,
M. Ferrais,
E. Podlewska Gaca,
A. Drouard,
F. Marchis,
M. Birlan,
Z. Benkhaldoun,
J. Berthier,
P. Bartczak,
C. Dumas,
G. Dudzinski,
J. Durech,
J. Castillo-Rogez,
F. Cipriani
, et al. (16 additional authors not shown)
Abstract:
Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain…
▽ More
Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain its density, and to search for the large craters that may be associated with the family formation event. We obtained disk-resolved images of Euphrosyne using SPHERE/ZIMPOL at ESO's 8.2-m VLT as part of our large program (ID: 199.C-0074, PI: Vernazza). We reconstructed its 3D-shape using the adam shape modeling algorithm based on the SPHERE images and the available lightcurves of this asteroid. We analyzed the dynamics of the satellite with the genoid meta-heuristic algorithm. Finally, we studied the shape of Euphrosyne using hydrostatic equilibrium models. Our SPHERE observations show that Euphrosyne has a nearly spherical shape with the sphericity index of 0.9888 and its surface lacks large impact craters. Euphrosyne's diameter is 268+/-6 km, making it one of the top 10 largest main belt asteroids. We detected a satellite of Euphrosyne -- S/2019 (31) 1-- that is about 4 km across, on an circular orbit. The mass determined from the orbit of the satellite together with the volume computed from the shape model imply a density of 1665+/-242 kg/m^3, suggesting that Euphrosyne probably contain a large fraction of water ice in its interior. We find that the spherical shape of Euphrosyne is a result of the reaccumulation process following the impact, as in the case of (10) Hygiea. However, our shape analysis reveals that, contrary to Hygiea, the axis ratios of Euphrosyne significantly differ from the ones suggested by fluid hydrostatic equilibrium following reaccumulation.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
The size, shape, density and ring of the dwarf planet Haumea from a stellar occultation
Authors:
J. L. Ortiz,
P. Santos-Sanz,
B. Sicardy,
G. Benedetti-Rossi,
D. Bérard,
N. Morales,
R. Duffard,
F. Braga-Ribas,
U. Hopp,
C. Ries,
V. Nascimbeni,
F. Marzari,
V. Granata,
A. Pál,
C. Kiss,
T. Pribulla,
R. Komžík,
K. Hornoch,
P. Pravec,
P. Bacci,
M. Maestripieri,
L. Nerli,
L. Mazzei,
M. Bachini,
F. Martinelli
, et al. (68 additional authors not shown)
Abstract:
Among the four known transneptunian dwarf planets, Haumea is an exotic, very elongated, and fast rotating body. In contrast to the other dwarf planets, its size, shape, albedo, and density are not well constrained. Here we report results of a multi-chord stellar occultation, observed on 2017 January 21. Secondary events observed around the main body are consistent with the presence of a ring of op…
▽ More
Among the four known transneptunian dwarf planets, Haumea is an exotic, very elongated, and fast rotating body. In contrast to the other dwarf planets, its size, shape, albedo, and density are not well constrained. Here we report results of a multi-chord stellar occultation, observed on 2017 January 21. Secondary events observed around the main body are consistent with the presence of a ring of opacity 0.5, width 70 km, and radius 2,287$_{-45}^{+75}$ km. The Centaur Chariklo was the first body other than a giant planet to show a ring system and the Centaur Chiron was later found to possess something similar to Chariklo's rings. Haumea is the first body outside the Centaur population with a ring. The ring is coplanar with both Haumea's equator and the orbit of its satellite Hi'iaka. Its radius places close to the 3:1 mean motion resonance with Haumea's spin period. The occultation by the main body provides an instantaneous elliptical limb with axes 1,704 $\pm$ 4 km x 1,138 $\pm$ 26 km. Combined with rotational light-curves, it constrains Haumea's 3D orientation and its triaxial shape, which is inconsistent with a homogeneous body in hydrostatic equilibrium. Haumea's largest axis is at least 2,322 $\pm$ 60 km, larger than thought before. This implies an upper limit of 1,885 $\pm$ 80 kg m$^{-3}$ for Haumea's density, smaller and less puzzling than previous estimations, and a geometric albedo of 0.51 $\pm$ 0.02, also smaller than previous estimations. No global N$_2$ or CH$_4$ atmosphere with pressures larger than 15 and 50 nbar (3-$σ$ limits), respectively, is detected.
△ Less
Submitted 4 June, 2020;
originally announced June 2020.
-
The large Trans-Neptunian Object 2002 TC$_{302}$ from combined stellar occultation, photometry and astrometry data
Authors:
J. L. Ortiz,
P. Santos-Sanz,
B. Sicardy,
G. Benedetti-Rossi,
R. Duffard,
N. Morales,
F. Braga-Ribas,
E. Fernández-Valenzuela,
V. Nascimbeni,
D. Nardiello,
A. Carbognani,
L. Buzzi,
A. Aletti,
P. Bacci,
M. Maestripieri,
L. Mazzei,
H. Mikuz,
J. Skvarc,
F. Ciabattari,
F. Lavalade,
G. Scarfi,
J. M. Mari,
M. Conjat,
S. Sposetti,
M. Bachini
, et al. (56 additional authors not shown)
Abstract:
On 28th January 2018, the large Trans-Neptunian Object (TNO) 2002TC302 occulted a m$_v= $15.3 star with ID 130957813463146112 in the Gaia DR2 stellar catalog. 12 positive occultation chords were obtained from Italy, France, Slovenia and Switzerland. Also, 4 negative detections were obtained near the north and south limbs. This represents the best observed stellar occultation by a TNO other than Pl…
▽ More
On 28th January 2018, the large Trans-Neptunian Object (TNO) 2002TC302 occulted a m$_v= $15.3 star with ID 130957813463146112 in the Gaia DR2 stellar catalog. 12 positive occultation chords were obtained from Italy, France, Slovenia and Switzerland. Also, 4 negative detections were obtained near the north and south limbs. This represents the best observed stellar occultation by a TNO other than Pluto, in terms of the number of chords published thus far. From the 12 chords, an accurate elliptical fit to the instantaneous projection of the body, compatible with the near misses, can be obtained. The resulting ellipse has major and minor axes of 543 $\pm$ 18 km and 460 $\pm$ 11 km, respectively, with a position angle of 3 $\pm$ 1 degrees for the minor axis. This information, combined with rotational light curves obtained with the 1.5m telescope at Sierra Nevada Observatory and the 1.23m telescope at Calar Alto observatory, allows us to derive possible 3D shapes and density estimations for the body, based on hydrostatic equilibrium assumptions. The effective area equivalent diameter is $\sim$ 84 km smaller than the radiometrically derived diameter using thermal data from Herschel and Spitzer Space Telescopes. This might indicate the existence of an unresolved satellite of up to $\sim$ 300 km in diameter, to account for all the thermal flux, although the occultation and thermal diameters are compatible within their error bars given the considerable uncertainty of the thermal results. The existence of a potential satellite also appears to be consistent with other ground-based data presented here. From the effective occultation diameter combined with H$_V$ measurements we derive a geometric albedo of 0.147 $\pm$ 0.005, which would be somewhat smaller if 2002TC302 has a satellite. The best occultation light curves do not show any signs of ring features or any signatures of a global atmosphere.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
Thermal properties of large main-belt asteroids observed by Herschel PACS
Authors:
V. Alí-Lagoa,
T. G. Müller,
C. Kiss,
R. Szakáts,
G. Marton,
A. Farkas-Takács,
P. Bartczak,
M. Butkiewicz-Bąk,
G. Dudziński,
A. Marciniak,
E. Podlewska-Gaca,
R. Duffard,
P. Santos-Sanz,
J. L. Ortiz
Abstract:
Non-resolved thermal infrared observations enable studies of thermal and physical properties of asteroid surfaces provided the shape and rotational properties of the target are well determined via thermo-physical models. We used calibration-programme Herschel PACS data (70, 100, 160 $μ$m) and state-of-the-art shape models derived from adaptive-optics observations and/or optical light curves to con…
▽ More
Non-resolved thermal infrared observations enable studies of thermal and physical properties of asteroid surfaces provided the shape and rotational properties of the target are well determined via thermo-physical models. We used calibration-programme Herschel PACS data (70, 100, 160 $μ$m) and state-of-the-art shape models derived from adaptive-optics observations and/or optical light curves to constrain for the first time the thermal inertia of twelve large main-belt asteroids. We also modelled previously well-characterised targets such as (1) Ceres or (4) Vesta as they constitute important benchmarks. Using the scale as a free parameter, most targets required a re-scaling $\sim$5\% consistent with what would be expected given the absolute calibration error bars. This constitutes a good cross-validation of the scaled shape models, although some targets required larger re-scaling to reproduce the IR data. We obtained low thermal inertias typical of large main belt asteroids studied before, which continues to give support to the notion that these surfaces are covered by fine-grained insulating regolith. Although the wavelengths at which PACS observed are longwards of the emission peak for main-belt asteroids, they proved to be extremely valuable to constrain size and thermal inertia and not too sensitive to surface roughness. Finally, we also propose a graphical approach to help examine how different values of the exponent used for scaling the thermal inertia as a function of heliocentric distance (i.e. temperature) affect our interpretation of the results.
△ Less
Submitted 4 May, 2020;
originally announced May 2020.
-
Physical parameters of selected Gaia mass asteroids
Authors:
E. Podlewska-Gaca,
A. Marciniak,
V. Alí-Lagoa,
P. Bartczak,
T. G. Müller,
R. Szakáts,
R. Duffard,
L. Molnár,
A. Pál,
M. Butkiewicz-Bąk,
G. Dudziński,
K. Dziadura,
P. Antonini,
V. Asenjo,
M. Audejean,
Z. Benkhaldoun,
R. Behrend,
L. Bernasconi,
J. M. Bosch,
A. Chapman,
B. Dintinjana,
A. Farkas,
M. Ferrais,
S. Geier,
J. Grice
, et al. (14 additional authors not shown)
Abstract:
Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties a…
▽ More
Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties as high as 20-30%. The aim of this paper is to determine the 3D shape models and compute the volumes for 13 main belt asteroids that were selected from those targets for which Gaia will provide the mass with an accuracy of better than 10%. We used the genetic Shaping Asteroids with Genetic Evolution (SAGE) algorithm to fit disk-integrated, dense photometric lightcurves and obtain detailed asteroid shape models. These models were scaled by fitting them to available stellar occultation and/or thermal infrared observations. We determine the spin and shape models for 13 main belt asteroids using the SAGE algorithm. Occultation fitting enables us to confirm main shape features and the spin state, while thermophysical modeling leads to more precise diameters as well as estimates of thermal inertia values. We calculated the volume of our sample of main-belt asteroids for which the Gaia satellite will provide precise mass determinations. From our volumes, it will then be possible to more accurately compute the bulk density, which is a fundamental physical property needed to understand the formation and evolution processes of small solar system bodies.
△ Less
Submitted 20 January, 2020;
originally announced January 2020.
-
(704) Interamnia: A transitional object between a dwarf planet and a typical irregular-shaped minor body
Authors:
J. Hanuš,
P. Vernazza,
M. Viikinkoski,
M. Ferrais,
N. Rambaux,
E. Podlewska-Gaca,
A. Drouard,
L. Jorda,
E. Jehin,
B. Carry,
M. Marsset,
F. Marchis,
B. Warner,
R. Behrend,
V. Asenjo,
N. Berger,
M. Bronikowska,
T. Brothers,
S. Charbonnel,
C. Colazo,
J-F. Coliac,
R. Duffard,
A. Jones,
A. Leroy,
A. Marciniak
, et al. (34 additional authors not shown)
Abstract:
With an estimated diameter in the 320 to 350 km range, (704) Interamnia is the fifth largest main belt asteroid and one of the few bodies that fills the gap in size between the four largest bodies with $D$ > 400 km (Ceres, Vesta, Pallas and Hygiea) and the numerous smaller bodies with $D$ $\lesssim$ 200 km. However, despite its large size, little is known about the shape and spin state of Interamn…
▽ More
With an estimated diameter in the 320 to 350 km range, (704) Interamnia is the fifth largest main belt asteroid and one of the few bodies that fills the gap in size between the four largest bodies with $D$ > 400 km (Ceres, Vesta, Pallas and Hygiea) and the numerous smaller bodies with $D$ $\lesssim$ 200 km. However, despite its large size, little is known about the shape and spin state of Interamnia and, therefore, about its bulk composition and past collisional evolution. We aimed to test at what size and mass the shape of a small body departs from a nearly ellipsoidal equilibrium shape (as observed in the case of the four largest asteroids) to an irregular shape as routinely observed in the case of smaller ($D$ $\lesssim$ 200 km) bodies. We observed Interamnia as part of our ESO VLT/SPHERE large program (ID: 199.C-0074) at thirteen different epochs. In addition, several new optical lightcurves were recorded. These data, along with stellar occultation data from the literature, were fed to the All-Data Asteroid Modeling (ADAM) algorithm to reconstruct the 3D-shape model of Interamnia and to determine its spin state. Interamnia's volume-equivalent diameter of 332 $\pm$ 6 km implies a bulk density of $ρ$=1.98 $\pm$ 0.68 gcm$^{-3}$ , which suggests that Interamnia - like Ceres and Hygiea - contains a high fraction of water ice, consistent with the paucity of apparent craters. Our observations reveal a shape that can be well approximated by an ellipsoid, and that is compatible with a fluid hydrostatic equilibrium at the 2 $σ$ level. The rather regular shape of Interamnia implies that the size and mass limit, under which the shapes of minor bodies with a high amount of water ice in the subsurface become irregular, has to be searched among smaller ($D$ $\lesssim$ 300km) less massive ($m$ $\lesssim$ 3x10$^{19}$ kg) bodies.
△ Less
Submitted 18 December, 2019; v1 submitted 29 November, 2019;
originally announced November 2019.
-
A new non-convex model of the binary asteroid (809) Lundia obtained with the SAGE modelling technique
Authors:
P. Bartczak,
A. Kryszczyńska,
G. Dudziński,
M. Polińska,
F. Colas,
F. Vachier,
A. Marciniak,
J. Pollock,
G. Apostolovska,
T. Santana-Ros,
R. Hirsch,
W. Dimitrow,
M. Murawiecka,
P. Wietrzycka,
J. Nadolny
Abstract:
We present a new non-convex model of the binary asteroid (809) Lundia. A SAGE (Shaping Asteroids with Genetic Evolution) method using disc-integrated photometry only was used for deriving physical parameters of this binary system. The model of (809) Lundia improves former system's pole solution and gives the ecliptic coordinates of the orbit pole - $λ=122^{\circ}$, $β=22^{\circ}$,…
▽ More
We present a new non-convex model of the binary asteroid (809) Lundia. A SAGE (Shaping Asteroids with Genetic Evolution) method using disc-integrated photometry only was used for deriving physical parameters of this binary system. The model of (809) Lundia improves former system's pole solution and gives the ecliptic coordinates of the orbit pole - $λ=122^{\circ}$, $β=22^{\circ}$, $σ=\pm5^{\circ}$ - and the orbital period of $15.41574 \pm 0.00001$ h. For scaling our results we used effective diameter of $D_{eff} = 9.6 \pm 1.1$ km obtained from Spitzer observations. The non-convex shape description of the components permitted a refined calculation of the components' volumes, leading to a density estimation of $2.5\pm0.2$ g/cm$^3$ and macroporosity of 13-23\%. The intermediate-scale features of the model may also offer new clues on the components' origin and evolution.
△ Less
Submitted 20 May, 2019;
originally announced May 2019.
-
Volume uncertainty assessment method of asteroid models from disk-integrated visual photometry
Authors:
P. Bartczak,
G. Dudziński
Abstract:
The need for more accurate asteroid models is perhaps secondary to the need to measure their quality. The uncertainties of models' parameters propagate to quantities like volume or density -- the most important and informative properties of asteroids -- affecting conclusions about their physical nature. Our knowledge on shapes and spins of small solar system bodies comes mostly from visual, disk-i…
▽ More
The need for more accurate asteroid models is perhaps secondary to the need to measure their quality. The uncertainties of models' parameters propagate to quantities like volume or density -- the most important and informative properties of asteroids -- affecting conclusions about their physical nature. Our knowledge on shapes and spins of small solar system bodies comes mostly from visual, disk-integrated photometry. In this work we present a method for asteroid model uncertainty assessment based on visual photometry (lightcurves and sparse-in-time absolute measurements) allowing the determination of realistic volume uncertainty, as well as spin axis orientation, rotational period and local surface features. The sensitivity analysis is conducted by creating clones of the nominal model and accepting the ones that fit the observations within a confidence level. The uncertainties of model parameters are extracted from the extreme values found in the accepted clone population. Creation of such population of clones enables the conversion of a deterministic asteroid model into stochastic one, and can be utilized to create observation predictions with error bars. The method was used to assess the uncertainties of fictitious test models and real targets, i.e. (21) Lutetia, (89) Julia, (243) Ida, (433) Eros and (162173) Ryugu. We conclude that volumes, and subsequently, densities of asteroids derived from lightcurve-based models likely have vastly understated uncertainties, the biggest source of which is the inability to establish the extent of the model along its spin axis.
△ Less
Submitted 24 April, 2019;
originally announced April 2019.
-
Shaping Asteroids with Genetic Evolution (SAGE)
Authors:
P. Bartczak,
G. Dudziński
Abstract:
In this work we present SAGE (Shaping Asteroid models using Genetic Evolution) asteroid modelling algorithm based solely on photometric lightcurve data. It produces non-convex shapes, rotation axes orientati and rotational periods of asteroids. The main concept behind a genetic evolution algorithm is to produce random populations of shapes and spin orientations by mutating a seed shape and iterati…
▽ More
In this work we present SAGE (Shaping Asteroid models using Genetic Evolution) asteroid modelling algorithm based solely on photometric lightcurve data. It produces non-convex shapes, rotation axes orientati and rotational periods of asteroids. The main concept behind a genetic evolution algorithm is to produce random populations of shapes and spin orientations by mutating a seed shape and iterating the process until it converges to a stable global minimum. To test SAGE we have performed tes on five artificial shapes. We have also modelled (433) Eros and (9) Meti asteroids, as ground truth observations for them exist, allowing us to validate the models. We have compared derived Eros shape with NEAR Shoem model and Metis shape with adaptive optics and stellar occultation observations as with other available Metis models from various inversion methods.
△ Less
Submitted 18 April, 2019;
originally announced April 2019.
-
The shape of (7) Iris as evidence of an ancient large impact?
Authors:
J. Hanuš,
M. Marsset,
P. Vernazza,
M. Viikinkoski,
A. Drouard,
M. Brož,
B. Carry,
R. Fetick,
F. Marchis,
L. Jorda,
T. Fusco,
M. Birlan,
T. Santana-Ros,
E. Podlewska-Gaca,
E. Jehin,
M. Ferrais,
J. Grice,
P. Bartczak,
J. Berthier,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
G. Dudzinski,
C. Dumas,
J. Ďurech
, et al. (13 additional authors not shown)
Abstract:
Asteroid (7) Iris is an ideal target for disk-resolved imaging owing to its brightness (V$\sim$7-8) and large angular size of 0.33 arcsec during its apparitions. Iris is believed to belong to the category of large unfragmented asteroids that avoided internal differentiation, implying that its current shape and topography may record the first few 100 Myr of the solar system's collisional evolution.…
▽ More
Asteroid (7) Iris is an ideal target for disk-resolved imaging owing to its brightness (V$\sim$7-8) and large angular size of 0.33 arcsec during its apparitions. Iris is believed to belong to the category of large unfragmented asteroids that avoided internal differentiation, implying that its current shape and topography may record the first few 100 Myr of the solar system's collisional evolution. We recovered information about the shape and surface topography of Iris from disk-resolved VLT/SPHERE/ZIMPOL images acquired in the frame of our ESO large program. We used the All-Data Asteroid Modeling (ADAM) shape reconstruction algorithm to model the 3D shape of Iris, using optical disk-integrated data and disk-resolved images from SPHERE as inputs. We analyzed the SPHERE images to infer the asteroid's global shape and the morphology of its main craters. We present the volume-equivalent diameter D$_{\rm eq}$=214$\pm$5 km, and bulk density $ρ$=2.7$\pm$0.3 g cm$^{-3}$ of Iris. Its shape appears to be consistent with that of an oblate spheroid with a large equatorial excavation. We identified eight putative surface features 20--40 km in diameter detected at several epochs, which we interpret as impact craters. Craters on Iris have depth-to-diameter ratios that are similar to those of analogous 10 km craters on Vesta. The bulk density of Iris is consistent with that of its meteoritic analog, namely LL ordinary chondrites. Considering the absence of a collisional family related to Iris and the number of large craters on its surface, we suggest that its equatorial depression may be the remnant of an ancient (at least 3 Gyr) impact. Iris's shape further opens the possibility that large planetesimals formed as almost perfect oblate spheroids. Finally, we attribute the difference in crater morphology between Iris and Vesta to their different surface gravities.
△ Less
Submitted 25 February, 2019;
originally announced February 2019.
-
Closing the gap between Earth-based and interplanetary mission observations: Vesta seen by VLT/SPHERE
Authors:
R. JL. Fétick,
L. Jorda,
P. Vernazza,
M. Marsset,
A. Drouard,
T. Fusco,
B. Carry,
F. Marchis,
J. Hanuš,
M. Viikinkoski,
M. Birlan,
P. Bartczak,
J. Berthier,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
G. Dudziński,
C. Dumas,
M. Ferrais,
E. Jehin,
M. Kaasalainen,
A. Kryszczynska,
P. Lamy,
H. Le Coroller,
A. Marciniak
, et al. (12 additional authors not shown)
Abstract:
Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta do…
▽ More
Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta down to a spatial resolution of approximately 20 m/pixel scale.
Aims. Here our aim was to determine how much topographic and albedo information can be retrieved from the ground with VLT/SPHERE in the case of Vesta, having a former space mission (Dawn) providing us with the ground truth that can be used as a benchmark.
Methods. We observed Vesta with VLT/SPHERE/ZIMPOL as part of our ESO large programme (ID 199.C-0074) at six different epochs, and deconvolved the collected images with a parametric point spread function (PSF). We then compared our images with synthetic views of Vesta generated from the 3D shape model of the Dawn mission, on which we projected Vesta's albedo information.
Results. We show that the deconvolution of the VLT/SPHERE images with a parametric PSF allows the retrieval of the main topographic and albedo features present across the surface of Vesta down to a spatial resolution of approximately 20-30 km. Contour extraction shows an accuracy of approximately 1 pixel (3.6 mas). The present study provides the very first quantitative estimate of the accuracy of ground-based adaptive-optics imaging observations of asteroid surfaces.
Conclusions. In the case of Vesta, the upcoming generation of 30-40m telescopes (ELT, TMT, GMT) should in principle be able to resolve all of the main features present across its surface, including the troughs and the north-south crater dichotomy, provided that they operate at the diffraction limit.
△ Less
Submitted 4 February, 2019;
originally announced February 2019.
-
Optical observations of NEA 3200 Phaethon (1983 TB) during the 2017 apparition
Authors:
Myung-Jin Kim,
Hee-Jae Lee,
Sang-Min Lee,
Dong-Heun Kim,
Fumi Yoshida,
Przemyslaw Bartczak,
Grzegorz Dudzinski,
Jintae Park,
Young-Jun Choi,
Hong-Kyu Moon,
Hong-Suh Yim,
Jin Choi,
Eun-Jung Choi,
Joh-Na Yoon,
Alexander Serebryanskiy,
Maxim Krugov,
Inna Reva,
Kamoliddin E. Ergashev,
Otabek Burkhonov,
Shuhrat A. Ehgamberdiev,
Yunus Turayev,
Zhong-Yi Lin,
Tomoko Arai,
Katsuhito Ohtsuka,
Takashi Ito
, et al. (2 additional authors not shown)
Abstract:
The near-Earth asteroid 3200 Phaethon (1983 TB) is an attractive object not only from a scientific viewpoint but also because of JAXA's DESTINY+ target. The rotational lightcurve and spin properties were investigated based on the data obtained in the ground-based observation campaign of Phaethon. We aim to refine the lightcurves and shape model of Phaethon using all available lightcurve datasets o…
▽ More
The near-Earth asteroid 3200 Phaethon (1983 TB) is an attractive object not only from a scientific viewpoint but also because of JAXA's DESTINY+ target. The rotational lightcurve and spin properties were investigated based on the data obtained in the ground-based observation campaign of Phaethon. We aim to refine the lightcurves and shape model of Phaethon using all available lightcurve datasets obtained via optical observation, as well as our time-series observation data from the 2017 apparition. Using eight 1-2-m telescopes and an optical imager, we acquired the optical lightcurves and derived the spin parameters of Phaethon. We applied the lightcurve inversion method and SAGE algorithm to deduce the convex and non-convex shape model and pole orientations. We analysed the optical lightcurve of Phaethon and derived a synodic and a sidereal rotational period of 3.6039 h, with an axis ratio of a/b = 1.07. The ecliptic longitude (lambda) and latitude (beta) of the pole orientation were determined as (308, -52) and (322, -40) via two independent methods. A non-convex model from the SAGE method, which exhibits a concavity feature, is also presented.
△ Less
Submitted 16 September, 2018;
originally announced September 2018.
-
Photometric survey, modelling, and scaling of long-period and low-amplitude asteroids
Authors:
A. Marciniak,
P. Bartczak,
T. Müller,
J. J. Sanabria,
V. Alí-Lagoa,
P. Antonini,
R. Behrend,
L. Bernasconi,
M. Bronikowska,
M. Butkiewicz - Bąk,
A. Cikota,
R. Crippa,
R. Ditteon,
G. Dudziński,
R. Duffard,
K. Dziadura,
S. Fauvaud,
S. Geier,
R. Hirsch,
J. Horbowicz,
M. Hren,
L. Jerosimic,
K. Kamiński,
P. Kankiewicz,
I. Konstanciak
, et al. (18 additional authors not shown)
Abstract:
The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too.
To counteract these selection effects, we are running a photometric campaign of a l…
▽ More
The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too.
To counteract these selection effects, we are running a photometric campaign of a large sample of main belt asteroids omitted in most previous studies. We determined synodic rotation periods and verified previous determinations. When a dataset for a given target was sufficiently large and varied, we performed spin and shape modelling with two different methods.
We used the convex inversion method and the non-convex SAGE algorithm, applied on the same datasets of dense lightcurves. Unlike convex inversion, the SAGE method allows for the existence of valleys and indentations on the shapes based only on lightcurves.
We obtained detailed spin and shape models for the first five targets of our sample: (159) Aemilia, (227) Philosophia, (329) Svea, (478) Tergeste, and (487) Venetia. When compared to stellar occultation chords, our models obtained an absolute size scale and major topographic features of the shape models were also confirmed. When applied to thermophysical modelling, they provided a very good fit to the infrared data and allowed their size, albedo, and thermal inertia to be determined.
Convex and non-convex shape models provide comparable fits to lightcurves. However, some non-convex models fit notably better to stellar occultation chords and to infrared data in sophisticated thermophysical modelling (TPM). In some cases TPM showed strong preference for one of the spin and shape solutions. Also, we confirmed that slowly rotating asteroids tend to have higher-than-average values of thermal inertia.
△ Less
Submitted 6 November, 2017;
originally announced November 2017.
-
Small Bodies Near and Far (SBNAF): a benchmark study on physical and thermal properties of small bodies in the Solar System
Authors:
T. G. Müller,
A. Marciniak,
C. Kiss,
R. Duffard,
V. Alí-Lagoa,
P. Bartczak,
M. Butkiewicz-Bąk,
G. Dudziński,
E. Fernández-Valenzuela,
G. Marton,
N. Morales,
J. -L. Ortiz,
D. Oszkiewicz,
T. Santana-Ros,
R. Szakáts,
P. Santos-Sanz,
A. Takácsné Farkas,
E. Varga-Verebélyi
Abstract:
The combination of visible and thermal data from the ground and astrophysics space missions is key to improving the scientific understanding of near-Earth, main-belt, trojans, centaurs, and trans-Neptunian objects. To get full information on a small sample of selected bodies we combine different methods and techniques: lightcurve inversion, stellar occultations, thermophysical modeling, radiometri…
▽ More
The combination of visible and thermal data from the ground and astrophysics space missions is key to improving the scientific understanding of near-Earth, main-belt, trojans, centaurs, and trans-Neptunian objects. To get full information on a small sample of selected bodies we combine different methods and techniques: lightcurve inversion, stellar occultations, thermophysical modeling, radiometric methods, radar ranging and adaptive optics imaging. The SBNAF project will derive size, spin and shape, thermal inertia, surface roughness, and in some cases bulk densities and even internal structure and composition, for objects out to the most distant regions in the Solar System. The applications to objects with ground-truth information allows us to advance the techniques beyond the current state-of-the-art and to assess the limitations of each method. We present results from our project's first phase: the analysis of combined Herschel-KeplerK2 data and Herschel-occultation data for TNOs; synergy studies on large MBAs from combined high-quality visual and thermal data; establishment of well-known asteroids as celestial calibrators for far-infrared, sub-millimetre, and millimetre projects; first results on near-Earth asteroids properties from combined lightcurve, radar and thermal measurements, as well as the Hayabusa-2 mission target characterisation. We also introduce public web-services and tools for studies of small bodies in general.
△ Less
Submitted 25 October, 2017;
originally announced October 2017.
-
Statistical analysis of the ambiguities in the asteroid period determinations
Authors:
M. Butkiewicz-Bąk,
T. Kwiatkowski,
P. Bartczak,
G. Dudziński,
A. Marciniak
Abstract:
Among asteroids there exist ambiguities in their rotation period determinations. They are due to incomplete coverage of the rotation, noise and/or aliases resulting from gaps between separate lightcurves. To help to remove such uncertainties, basic characteristic of the lightcurves resulting from constraints imposed by the asteroid shapes and geometries of observations should be identified. We sim…
▽ More
Among asteroids there exist ambiguities in their rotation period determinations. They are due to incomplete coverage of the rotation, noise and/or aliases resulting from gaps between separate lightcurves. To help to remove such uncertainties, basic characteristic of the lightcurves resulting from constraints imposed by the asteroid shapes and geometries of observations should be identified. We simulated light variations of asteroids which shapes were modelled as Gaussian random spheres, with random orientations of spin vectors and phase angles changed every $5^\circ$ from $0^\circ$ to $65^\circ$. This produced 1.4 mln lightcurves. For each simulated lightcurve Fourier analysis has been made and the harmonic of the highest amplitude was recorded. From the statistical point of view, all lightcurves observed at phase angles $α< 30^\circ$, with peak-to-peak amplitudes $A>0.2$ mag are bimodal. Second most frequently dominating harmonic is the first one, with the 3rd harmonic following right after. For 1% of lightcurves with amplitudes $A < 0.1$ mag and phase angles $α< 40^\circ$ 4th harmonic dominates.
△ Less
Submitted 14 July, 2017;
originally announced July 2017.
-
Shape models and physical properties of asteroids
Authors:
T. Santana-Ros,
G. Dudziński,
P. Bartczak
Abstract:
Despite the large amount of high quality data generated in recent space encounters with asteroids, the majority of our knowledge about these objects comes from ground based observations. Asteroids travelling in orbits that are potentially hazardous for the Earth form an especially interesting group to be studied. In order to predict their orbital evolution, it is necessary to investigate their phy…
▽ More
Despite the large amount of high quality data generated in recent space encounters with asteroids, the majority of our knowledge about these objects comes from ground based observations. Asteroids travelling in orbits that are potentially hazardous for the Earth form an especially interesting group to be studied. In order to predict their orbital evolution, it is necessary to investigate their physical properties. This paper briefly describes the data requirements and different techniques used to solve the lightcurve inversion problem. Although photometry is the most abundant type of observational data, models of asteroids can be obtained using various data types and techniques. We describe the potential of radar imaging and stellar occultation timings to be combined with disk-integrated photometry in order to reveal information about physical properties of asteroids.
△ Less
Submitted 16 May, 2017;
originally announced May 2017.
-
A new non-convex model of the binary asteroid 90 Antiope obtained with the SAGE modelling technique
Authors:
P. Bartczak,
T. Michałowski,
T. Santana-Ros,
G. Dudziński
Abstract:
We present a new non-convex model of the 90 Antiope binary asteroid, derived with a modified version of the SAGE (Shaping Asteroids with Genetic Evolution) method using disk-integrated photometry only. A new variant of the SAGE algorithm capable of deriving models of binary systems is described. The model of 90 Antiope confirms the system's pole solution ($λ=199^{\circ}$, $β=38^{\circ}$,…
▽ More
We present a new non-convex model of the 90 Antiope binary asteroid, derived with a modified version of the SAGE (Shaping Asteroids with Genetic Evolution) method using disk-integrated photometry only. A new variant of the SAGE algorithm capable of deriving models of binary systems is described. The model of 90 Antiope confirms the system's pole solution ($λ=199^{\circ}$, $β=38^{\circ}$, $σ=\pm5^{\circ}$) and the orbital period ($16.505046 \pm 0.000005$ h). A comparison between the stellar occultation chords obtained during the 2011 occultation and the projected shape solution has been used to scale the model. The resulting scaled model allowed us to obtain the equivalent radii ($R_{1}=40.4\pm0.9$ km and $R_{2}=40.2\pm0.9$ km) and the distance between the two system components ($176\pm4$ km), leading to a total system mass of ($9.14\pm0.62$)$\cdot10^{17}$ kg. The non-convex shape description of the components permitted a refined calculation of the components' volumes, leading to a density estimation of $1.67\pm0.23$ g cm$^{-3}$. The intermediate-scale features of the model may also offer new clues on the components' origin and evolution.
△ Less
Submitted 25 June, 2014;
originally announced June 2014.