-
The Merian Survey: Design, Construction, and Characterization of a Filter Set Optimized to Find Dwarf Galaxies and Measure their Dark Matter Halo Properties with Weak Lensing
Authors:
Yifei Luo,
Alexie Leauthaud,
Jenny Greene,
Song Huang,
Erin Kado-Fong,
Shany Danieli,
Ting S. Li,
Jiaxuan Li,
Diana Blanco,
Erik J. Wasleske,
Joseph Wick,
Abby Mintz,
Runquan Guan,
Annika H. G. Peter,
Vivienne Baldassare,
Alyson Brooks,
Arka Banerjee,
Joy Bhattacharyya,
Zheng Cai,
Xinjun Chen,
Jim Gunn,
Sean D. Johnson,
Lee S. Kelvin,
Mingyu Li,
Xiaojing Lin
, et al. (6 additional authors not shown)
Abstract:
The Merian survey is mapping $\sim$ 850 degrees$^2$ of the Hyper Suprime-Cam Strategic Survey Program (HSC-SSP) wide layer with two medium-band filters on the 4-meter Victor M. Blanco telescope at the Cerro Tololo Inter-American Observatory, with the goal of carrying the first high signal-to-noise (S/N) measurements of weak gravitational lensing around dwarf galaxies. This paper presents the desig…
▽ More
The Merian survey is mapping $\sim$ 850 degrees$^2$ of the Hyper Suprime-Cam Strategic Survey Program (HSC-SSP) wide layer with two medium-band filters on the 4-meter Victor M. Blanco telescope at the Cerro Tololo Inter-American Observatory, with the goal of carrying the first high signal-to-noise (S/N) measurements of weak gravitational lensing around dwarf galaxies. This paper presents the design of the Merian filter set: N708 ($λ_c = 7080 \unicode{x212B}$, $Δλ= 275\unicode{x212B}$) and N540 ($λ_c = 5400\unicode{x212B}$, $Δλ= 210\unicode{x212B}$). The central wavelengths and filter widths of N708 and N540 were designed to detect the $\rm Hα$ and $\rm [OIII]$ emission lines of galaxies in the mass range $8<\rm \log M_*/M_\odot<9$ by comparing Merian fluxes with HSC broad-band fluxes. Our filter design takes into account the weak lensing S/N and photometric redshift performance. Our simulations predict that Merian will yield a sample of $\sim$ 85,000 star-forming dwarf galaxies with a photometric redshift accuracy of $σ_{Δz/(1+z)}\sim 0.01$ and an outlier fraction of $η=2.8\%$ over the redshift range $0.058<z<0.10$. With 60 full nights on the Blanco/Dark Energy Camera (DECam), the Merian survey is predicted to measure the average weak lensing profile around dwarf galaxies with lensing $\rm S/N \sim 32$ within $r<0.5$ Mpc and lensing $\rm S/N \sim 90$ within $r<1.0$ Mpc. This unprecedented sample of star-forming dwarf galaxies will allow for studies of the interplay between dark matter and stellar feedback and their roles in the evolution of dwarf galaxies.
△ Less
Submitted 3 April, 2024; v1 submitted 30 May, 2023;
originally announced May 2023.
-
Quasar Luminosity Function at z = 7
Authors:
Yoshiki Matsuoka,
Masafusa Onoue,
Kazushi Iwasawa,
Michael A. Strauss,
Nobunari Kashikawa,
Takuma Izumi,
Tohru Nagao,
Masatoshi Imanishi,
Masayuki Akiyama,
John D. Silverman,
Naoko Asami,
James Bosch,
Hisanori Furusawa,
Tomotsugu Goto,
James E. Gunn,
Yuichi Harikane,
Hiroyuki Ikeda,
Kohei Inayoshi,
Rikako Ishimoto,
Toshihiro Kawaguchi,
Satoshi Kikuta,
Kotaro Kohno,
Yutaka Komiyama,
Chien-Hsiu Lee,
Robert H. Lupton
, et al. (19 additional authors not shown)
Abstract:
We present the quasar luminosity function (LF) at $z = 7$, measured with 35 spectroscopically confirmed quasars at $6.55 < z < 7.15$. The sample of 22 quasars from the Subaru High-$z$ Exploration of Low-Luminosity Quasars (SHELLQs) project, combined with 13 brighter quasars in the literature, covers an unprecedentedly wide range of rest-frame ultraviolet magnitudes over $-28 < M_{1450} < -23$. We…
▽ More
We present the quasar luminosity function (LF) at $z = 7$, measured with 35 spectroscopically confirmed quasars at $6.55 < z < 7.15$. The sample of 22 quasars from the Subaru High-$z$ Exploration of Low-Luminosity Quasars (SHELLQs) project, combined with 13 brighter quasars in the literature, covers an unprecedentedly wide range of rest-frame ultraviolet magnitudes over $-28 < M_{1450} < -23$. We found that the binned LF flattens significantly toward the faint end populated by the SHELLQs quasars. A maximum likelihood fit to a double power-law model has a break magnitude $M^*_{1450} = -25.60^{+0.40}_{-0.30}$, a characteristic density $Φ^* = 1.35^{+0.47}_{-0.30}$ Gpc$^{-3}$ mag$^{-1}$, and a bright-end slope $β= -3.34^{+0.49}_{-0.57}$, when the faint-end slope is fixed to $α= -1.2$ as observed at $z \le 6$. The overall LF shape remains remarkably similar from $z = 4$ to $7$, while the amplitude decreases substantially toward higher redshifts, with a clear indication of an accelerating decline at $z \ge 6$. The estimated ionizing photon density, $10^{48.2 \pm 0.1}$ s$^{-1}$ Mpc$^{-3}$, is less than 1 % of the critical rate to keep the intergalactic medium ionized at $z = 7$, and thus indicates that quasars are not a major contributor to cosmic reionization.
△ Less
Submitted 18 May, 2023;
originally announced May 2023.
-
Multiparticle collision simulations of dense stellar systems and plasmas
Authors:
P. Di Cintio,
M. Pasquato,
L. Barbieri,
H. Bufferand,
L. Casetti,
G. Ciraolo,
U. N. Di Carlo,
P. Ghendrih,
J. P. Gunn,
S. Gupta,
H. Kim,
S. Lepri,
R. Livi,
A. Simon-Petit,
A. A. Trani,
S. -J. Yoon
Abstract:
We summarize a series of numerical experiments of collisional dynamics in dense stellar systems such as globular clusters (GCs) and in weakly collisional plasmas using a novel simulation technique, the so-called Multi-particle collision (MPC) method, alternative to Fokker-Planck and Monte Carlo approaches. MPC is related to particle-mesh approaches for the computation of self consistent long-range…
▽ More
We summarize a series of numerical experiments of collisional dynamics in dense stellar systems such as globular clusters (GCs) and in weakly collisional plasmas using a novel simulation technique, the so-called Multi-particle collision (MPC) method, alternative to Fokker-Planck and Monte Carlo approaches. MPC is related to particle-mesh approaches for the computation of self consistent long-range fields, ensuring that simulation time scales with $N\log N$ in the number of particles, as opposed to $N^2$ for direct $N$-body. The collisional relaxation effects are modelled by computing particle interactions based on a collision operator approach that ensures rigorous conservation of energy and momenta and depends only on particles velocities and cell-based integrated quantities.
△ Less
Submitted 11 February, 2022; v1 submitted 12 January, 2022;
originally announced January 2022.
-
Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs). XVI. 69 New Quasars at 5.8 < z < 7.0
Authors:
Yoshiki Matsuoka,
Kazushi Iwasawa,
Masafusa Onoue,
Takuma Izumi,
Nobunari Kashikawa,
Michael A. Strauss,
Masatoshi Imanishi,
Tohru Nagao,
Masayuki Akiyama,
John D. Silverman,
Naoko Asami,
James Bosch,
Hisanori Furusawa,
Tomotsugu Goto,
James E. Gunn,
Yuichi Harikane,
Hiroyuki Ikeda,
Rikako Ishimoto,
Toshihiro Kawaguchi,
Nanako Kato,
Satoshi Kikuta,
Kotaro Kohno,
Yutaka Komiyama,
Chien-Hsiu Lee,
Robert H. Lupton
, et al. (19 additional authors not shown)
Abstract:
We present the spectroscopic discovery of 69 quasars at 5.8 < z < 7.0, drawn from the Hyper Suprime-Cam (HSC) Subaru Strategic Program (SSP) imaging survey data. This is the 16th publication from the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, and completes identification of all but the faintest candidates (i.e., i-band dropouts with zAB < 24 and y-band detections, and z…
▽ More
We present the spectroscopic discovery of 69 quasars at 5.8 < z < 7.0, drawn from the Hyper Suprime-Cam (HSC) Subaru Strategic Program (SSP) imaging survey data. This is the 16th publication from the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, and completes identification of all but the faintest candidates (i.e., i-band dropouts with zAB < 24 and y-band detections, and z-band dropouts with yAB < 24) with Bayesian quasar probability Pq > 0.1 in the HSC-SSP third public data release (PDR3). The sample reported here also includes three quasars with Pq < 0.1 at z ~ 6.6, which we selected in an effort to completely cover the reddest point sources with simple color cuts. The number of high-z quasars discovered in SHELLQs has now grown to 162, including 23 type-II quasar candidates. This paper also presents identification of seven galaxies at 5.6 < z < 6.7, an [O III] emitter at z = 0.954, and 31 Galactic cool stars and brown dwarfs. High-z quasars and galaxies comprise 75 % and 16 % respectively of all the spectroscopic SHELLQs objects that pass our latest selection algorithm with the PDR3 photometry. That is, a total of 91 % of the objects lie at z > 5.6. This demonstrates that the algorithm has very high efficiency, even though we are probing an unprecedentedly low-luminosity population down to M1450 ~ -21 mag.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
The Prototype Telescope and Spectrograph System for the AMASE Project
Authors:
Renbin Yan,
Matthew A. Bershady,
Michael P. Smith,
Nicholas MacDonald,
Dmitry Bizyaev,
Kevin Bundy,
Sabyasachi Chattopadhyay,
James E. Gunn,
Kyle B. Westfall,
Marsha J. Wolf
Abstract:
We present the design of the prototype telescope and spectrograph system for the Affordable Multiple Aperture Spectroscopy Explorer (AMASE) project. AMASE is a planned project that will pair 100 identical multi-fiber spectrographs with a large array of telephoto lenses to achieve a large area integral field spectroscopy survey of the sky at the spatial resolution of half an arcminute and a spectra…
▽ More
We present the design of the prototype telescope and spectrograph system for the Affordable Multiple Aperture Spectroscopy Explorer (AMASE) project. AMASE is a planned project that will pair 100 identical multi-fiber spectrographs with a large array of telephoto lenses to achieve a large area integral field spectroscopy survey of the sky at the spatial resolution of half an arcminute and a spectral resolution of R=15,000, covering important emission lines in the optical for studying the ionized gas in the Milky Way and beyond. The project will be enabled by a significant reduction in the cost of each spectrograph unit, which is achieved by reducing the beam width and the use of small-pixel CMOS detectors, 50um-core optical fibers, and commercial photographic lenses in the spectrograph. Although constrained by the challenging high spectral resolution requirement, we realize a 40% reduction in cost per fiber at constant etendue relative to, e.g., DESI. As the reduction of cost is much more significant than the reduction in the amount of light received per fiber, replicating such a system many times is more cost effective than building a single large spectrograph that achieves the same survey speed. We present the design of the prototype telescope and instrument system and the study of its cost effectiveness.
△ Less
Submitted 24 May, 2021;
originally announced May 2021.
-
Focal ratio degradation for fiber positioner operation in astronomical spectrographs
Authors:
Brent Belland,
James Gunn,
Dan Reiley,
Judith Cohen,
Evan Kirby,
Antonio Cesar de Oliveira,
Ligia Souza de Oliveira,
Mitsuko Roberts,
Michael Seiffert
Abstract:
Focal ratio degradation (FRD), the increase of light's focal ratio between the input into an optical fiber and the output, is important to characterize for astronomical spectrographs due to its effects on throughput and the point spread function. However, while FRD is a function of many fiber properties such as stresses, microbending, and surface imperfections, angular misalignments between the in…
▽ More
Focal ratio degradation (FRD), the increase of light's focal ratio between the input into an optical fiber and the output, is important to characterize for astronomical spectrographs due to its effects on throughput and the point spread function. However, while FRD is a function of many fiber properties such as stresses, microbending, and surface imperfections, angular misalignments between the incoming light and the face of the fiber also affect the light profile and complicate this measurement. A compact experimental setup and a model separating FRD from angular misalignment was applied to a fiber subjected to varying stresses or angular misalignments to determine the magnitude of these effects. The FRD was then determined for a fiber in a fiber positioner that will be used in the Subaru Prime Focus Spectrograph (PFS). The analysis we carried out for the PFS positioner suggests that effects of angular misalignment dominate and no significant FRD increase due to stress should occur.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
The CFHT Large Area U-band Deep Survey (CLAUDS)
Authors:
Marcin Sawicki,
Stephane Arnouts,
Jiasheng Huang,
Jean Coupon,
Anneya Golob,
Stephen Gwyn,
Sebastien Foucaud,
Thibaud Moutard,
Ikuru Iwata,
Chengze Liu,
Lingjian Chen,
Guillaume Desprez,
Yuichi Harikane,
Yoshiaki Ono,
Michael A. Strauss,
Masayuki Tanaka,
Nathalie Thibert,
Michael Balogh,
Kevin Bundy,
Scott Chapman,
James E. Gunn,
Bau-Ching Hsieh,
Olivier Ilbert,
Yipeng Jing,
Olivier LeFevre
, et al. (15 additional authors not shown)
Abstract:
The CFHT Large Area U-band Deep Survey (CLAUDS) uses data taken with the MegaCam mosaic imager on CFHT to produce images of 18.60 deg2 with median seeing of FWHM=0.92 arcsec and to a median depth of U = 27.1 AB (5 sigma in 2 arcsec apertures), with selected areas that total 1.36 deg2 reaching a median depth of U=27.7 AB. These are the deepest U-band images assembled to date over this large an area…
▽ More
The CFHT Large Area U-band Deep Survey (CLAUDS) uses data taken with the MegaCam mosaic imager on CFHT to produce images of 18.60 deg2 with median seeing of FWHM=0.92 arcsec and to a median depth of U = 27.1 AB (5 sigma in 2 arcsec apertures), with selected areas that total 1.36 deg2 reaching a median depth of U=27.7 AB. These are the deepest U-band images assembled to date over this large an area. These data are located in four fields also imaged to comparably faint levels in grizy and several narrowband filters as part of the Hyper Suprime-Cam (HSC) Subaru Strategic Program (HSC-SSP). These CFHT and Subaru datasets will remain unmatched in their combination of area and depth until the advent of the Large Synoptic Survey Telescope (LSST). This paper provides an overview of the scientific motivation for CLAUDS and gives details of the observing strategy, observations, data reduction, and data merging with the HSC-SSP. Three early applications of these deep data are used to illustrate the potential of the dataset: deep U-band galaxy number counts, z~3 Lyman break galaxy (LBG) selection, and photometric redshifts improved by adding CLAUDS U to the Subaru HSC grizy photometry.
△ Less
Submitted 12 September, 2019;
originally announced September 2019.
-
Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs). X. Discovery of 35 Quasars and Luminous Galaxies at 5.7 $\le$ z $\le$ 7.0
Authors:
Yoshiki Matsuoka,
Kazushi Iwasawa,
Masafusa Onoue,
Nobunari Kashikawa,
Michael A. Strauss,
Chien-Hsiu Lee,
Masatoshi Imanishi,
Tohru Nagao,
Masayuki Akiyama,
Naoko Asami,
James Bosch,
Hisanori Furusawa,
Tomotsugu Goto,
James E. Gunn,
Yuichi Harikane,
Hiroyuki Ikeda,
Takuma Izumi,
Toshihiro Kawaguchi,
Nanako Kato,
Satoshi Kikuta,
Kotaro Kohno,
Yutaka Komiyama,
Shuhei Koyama,
Robert H. Lupton,
Takeo Minezaki
, et al. (22 additional authors not shown)
Abstract:
We report the discovery of 28 quasars and 7 luminous galaxies at 5.7 $\le$ z $\le$ 7.0. This is the tenth in a series of papers from the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the deep multi-band imaging data produced by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. The total number of spectroscopically identified objects in SHELLQs has…
▽ More
We report the discovery of 28 quasars and 7 luminous galaxies at 5.7 $\le$ z $\le$ 7.0. This is the tenth in a series of papers from the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the deep multi-band imaging data produced by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. The total number of spectroscopically identified objects in SHELLQs has now grown to 93 high-z quasars, 31 high-z luminous galaxies, 16 [O III] emitters at z ~ 0.8, and 65 Galactic cool dwarfs (low-mass stars and brown dwarfs). These objects were found over 900 deg2, surveyed by HSC between 2014 March and 2018 January. The full quasar sample includes 18 objects with very strong and narrow Ly alpha emission, whose stacked spectrum is clearly different from that of other quasars or galaxies. While the stacked spectrum shows N V 1240 emission and resembles that of lower-z narrow-line quasars, the small Ly alpha width may suggest a significant contribution from the host galaxies. Thus these objects may be composites of quasars and star-forming galaxies.
△ Less
Submitted 19 August, 2019;
originally announced August 2019.
-
The Apache Point Observatory Galactic Evolution Experiment (APOGEE) Spectrographs
Authors:
J. C. Wilson,
F. R. Hearty,
M. F. Skrutskie,
S. R. Majewski,
J. A. Holtzman,
D. Eisenstein,
J. Gunn,
B. Blank,
C. Henderson,
S. Smee,
M. Nelson,
D. Nidever,
J. Arns,
R. Barkhouser,
J. Barr,
S. Beland,
M. A. Bershady,
M. R. Blanton,
S. Brunner,
A. Burton,
L. Carey,
M. Carr,
J. P. Colque,
J. Crane,
G. J. Damke
, et al. (64 additional authors not shown)
Abstract:
We describe the design and performance of the near-infrared (1.51--1.70 micron), fiber-fed, multi-object (300 fibers), high resolution (R = lambda/delta lambda ~ 22,500) spectrograph built for the Apache Point Observatory Galactic Evolution Experiment (APOGEE). APOGEE is a survey of ~ 10^5 red giant stars that systematically sampled all Milky Way populations (bulge, disk, and halo) to study the Ga…
▽ More
We describe the design and performance of the near-infrared (1.51--1.70 micron), fiber-fed, multi-object (300 fibers), high resolution (R = lambda/delta lambda ~ 22,500) spectrograph built for the Apache Point Observatory Galactic Evolution Experiment (APOGEE). APOGEE is a survey of ~ 10^5 red giant stars that systematically sampled all Milky Way populations (bulge, disk, and halo) to study the Galaxy's chemical and kinematical history. It was part of the Sloan Digital Sky Survey III (SDSS-III) from 2011 -- 2014 using the 2.5 m Sloan Foundation Telescope at Apache Point Observatory, New Mexico. The APOGEE-2 survey is now using the spectrograph as part of SDSS-IV, as well as a second spectrograph, a close copy of the first, operating at the 2.5 m du Pont Telescope at Las Campanas Observatory in Chile. Although several fiber-fed, multi-object, high resolution spectrographs have been built for visual wavelength spectroscopy, the APOGEE spectrograph is one of the first such instruments built for observations in the near-infrared. The instrument's successful development was enabled by several key innovations, including a "gang connector" to allow simultaneous connections of 300 fibers; hermetically sealed feedthroughs to allow fibers to pass through the cryostat wall continuously; the first cryogenically deployed mosaic volume phase holographic grating; and a large refractive camera that includes mono-crystalline silicon and fused silica elements with diameters as large as ~ 400 mm. This paper contains a comprehensive description of all aspects of the instrument including the fiber system, optics and opto-mechanics, detector arrays, mechanics and cryogenics, instrument control, calibration system, optical performance and stability, lessons learned, and design changes for the second instrument.
△ Less
Submitted 3 February, 2019;
originally announced February 2019.
-
Discovery of the First Low-Luminosity Quasar at z > 7
Authors:
Yoshiki Matsuoka,
Masafusa Onoue,
Nobunari Kashikawa,
Michael A. Strauss,
Kazushi Iwasawa,
Chien-Hsiu Lee,
Masatoshi Imanishi,
Tohru Nagao,
Masayuki Akiyama,
Naoko Asami,
James Bosch,
Hisanori Furusawa,
Tomotsugu Goto,
James E. Gunn,
Yuichi Harikane,
Hiroyuki Ikeda,
Takuma Izumi,
Toshihiro Kawaguchi,
Nanako Kato,
Satoshi Kikuta,
Kotaro Kohno,
Yutaka Komiyama,
Shuhei Koyama,
Robert H. Lupton,
Takeo Minezaki
, et al. (23 additional authors not shown)
Abstract:
We report the discovery of a quasar at z = 7.07, which was selected from the deep multi-band imaging data collected by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. This quasar, HSC J124353.93+010038.5, has an order of magnitude lower luminosity than do the other known quasars at z > 7. The rest-frame ultraviolet absolute magnitude is M1450 = -24.13 +/- 0.08 mag and the bolometric l…
▽ More
We report the discovery of a quasar at z = 7.07, which was selected from the deep multi-band imaging data collected by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. This quasar, HSC J124353.93+010038.5, has an order of magnitude lower luminosity than do the other known quasars at z > 7. The rest-frame ultraviolet absolute magnitude is M1450 = -24.13 +/- 0.08 mag and the bolometric luminosity is Lbol = (1.4 +/- 0.1) x 10^{46} erg/s. Its spectrum in the optical to near-infrared shows strong emission lines, and shows evidence for a fast gas outflow, as the C IV line is blueshifted and there is indication of broad absorption lines. The Mg II-based black hole mass is Mbh = (3.3 +/- 2.0) x 10^8 Msun, thus indicating a moderate mass accretion rate with an Eddington ratio 0.34 +/- 0.20. It is the first z > 7 quasar with sub-Eddington accretion, besides being the third most distant quasar, known to date. The luminosity and black hole mass are comparable to, or even lower than, those measured for the majority of low-z quasars discovered by the Sloan Digital Sky Survey, and thus this quasar likely represents a z > 7 counterpart to quasars commonly observed in the low-z universe.
△ Less
Submitted 29 January, 2019;
originally announced January 2019.
-
Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs). V. Quasar Luminosity Function and Contribution to Cosmic Reionization at z = 6
Authors:
Yoshiki Matsuoka,
Michael A. Strauss,
Nobunari Kashikawa,
Masafusa Onoue,
Kazushi Iwasawa,
Ji-Jia Tang,
Chien-Hsiu Lee,
Masatoshi Imanishi,
Tohru Nagao,
Masayuki Akiyama,
Naoko Asami,
James Bosch,
Hisanori Furusawa,
Tomotsugu Goto,
James E. Gunn,
Yuichi Harikane,
Hiroyuki Ikeda,
Takuma Izumi,
Toshihiro Kawaguchi,
Nanako Kato,
Satoshi Kikuta,
Kotaro Kohno,
Yutaka Komiyama,
Robert H. Lupton,
Takeo Minezaki
, et al. (22 additional authors not shown)
Abstract:
We present new measurements of the quasar luminosity function (LF) at $z \sim 6$, over an unprecedentedly wide range of the rest-frame ultraviolet luminosity $M_{1450}$ from $-30$ to $-22$ mag. This is the fifth in a series of publications from the Subaru High-$z$ Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the deep multi-band imaging data produced by the Hyper Suprime-…
▽ More
We present new measurements of the quasar luminosity function (LF) at $z \sim 6$, over an unprecedentedly wide range of the rest-frame ultraviolet luminosity $M_{1450}$ from $-30$ to $-22$ mag. This is the fifth in a series of publications from the Subaru High-$z$ Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the deep multi-band imaging data produced by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. The LF was calculated with a complete sample of 110 quasars at $5.7 \le z \le 6.5$, which includes 48 SHELLQs quasars discovered over 650 deg$^2$, and 63 brighter quasars discovered by the Sloan Digital Sky Survey and the Canada-France-Hawaii Quasar Survey (including one overlapping object). This is the largest sample of $z \sim 6$ quasars with a well-defined selection function constructed to date, and has allowed us to detect significant flattening of the LF at its faint end. A double power-law function fit to the sample yields a faint-end slope $α= -1.23^{+0.44}_{-0.34}$, a bright-end slope $β= -2.73^{+0.23}_{-0.31}$, a break magnitude $M_{1450}^* = -24.90^{+0.75}_{-0.90}$, and a characteristic space density $Φ^* = 10.9^{+10.0}_{-6.8}$ Gpc$^{-3}$ mag$^{-1}$. Integrating this best-fit model over the range $-18 < M_{1450} < -30$ mag, quasars emit ionizing photons at the rate of $\dot{n}_{\rm ion} = 10^{48.8 \pm 0.1}$ s$^{-1}$ Mpc$^{-3}$ at $z = 6.0$. This is less than 10 % of the critical rate necessary to keep the intergalactic medium ionized, which indicates that quasars are not a major contributor to cosmic reionization.
△ Less
Submitted 5 November, 2018;
originally announced November 2018.
-
Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs). IV. Discovery of 41 Quasars and Luminous Galaxies at 5.7 < z < 6.9
Authors:
Y. Matsuoka,
K. Iwasawa,
M. Onoue,
N. Kashikawa,
M. A. Strauss,
C. -H. Lee,
M. Imanishi,
T. Nagao,
M. Akiyama,
N. Asami,
J. Bosch,
H. Furusawa,
T. Goto,
J. E. Gunn,
Y. Harikane,
H. Ikeda,
T. Izumi,
T. Kawaguchi,
N. Kato,
S. Kikuta,
K. Kohno,
Y. Komiyama,
R. H. Lupton,
T. Minezaki,
S. Miyazaki
, et al. (22 additional authors not shown)
Abstract:
We report discovery of 41 new high-z quasars and luminous galaxies, which were spectroscopically identified at 5.7 < z < 6.9. This is the fourth in a series of papers from the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, based on the deep multi-band imaging data collected by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. We selected the photometric candidate…
▽ More
We report discovery of 41 new high-z quasars and luminous galaxies, which were spectroscopically identified at 5.7 < z < 6.9. This is the fourth in a series of papers from the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, based on the deep multi-band imaging data collected by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. We selected the photometric candidates by a Bayesian probabilistic algorithm, and then carried out follow-up spectroscopy with the Gran Telescopio Canarias and the Subaru Telescope. Combined with the sample presented in the previous papers, we have now spectroscopically identified 137 extremely-red HSC sources over about 650 deg2, which include 64 high-z quasars, 24 high-z luminous galaxies, 6 [O III] emitters at z ~ 0.8, and 43 Galactic cool dwarfs (low-mass stars and brown dwarfs). The new quasars span the luminosity range from M1450 ~ -26 to -22 mag, and continue to populate a few magnitude lower luminosities than have been probed by previous wide-field surveys. In a companion paper, we derive the quasar luminosity function at z ~ 6 over an unprecedentedly wide range of M1450 ~ -28 to -21 mag, exploiting the SHELLQs and other survey outcomes.
△ Less
Submitted 20 May, 2018; v1 submitted 5 March, 2018;
originally announced March 2018.
-
The Hyper Suprime-Cam SSP Survey: Overview and Survey Design
Authors:
H. Aihara,
N. Arimoto,
R. Armstrong,
S. Arnouts,
N. A. Bahcall,
S. Bickerton,
J. Bosch,
K. Bundy,
P. L. Capak,
J. H. H. Chan,
M. Chiba,
J. Coupon,
E. Egami,
M. Enoki,
F. Finet,
H. Fujimori,
S. Fujimoto,
H. Furusawa,
J. Furusawa,
T. Goto,
A. Goulding,
J. P. Greco,
J. E. Greene,
J. E. Gunn,
T. Hamana
, et al. (118 additional authors not shown)
Abstract:
Hyper Suprime-Cam (HSC) is a wide-field imaging camera on the prime focus of the 8.2m Subaru telescope on the summit of Maunakea in Hawaii. A team of scientists from Japan, Taiwan and Princeton University is using HSC to carry out a 300-night multi-band imaging survey of the high-latitude sky. The survey includes three layers: the Wide layer will cover 1400 deg$^2$ in five broad bands ($grizy$), w…
▽ More
Hyper Suprime-Cam (HSC) is a wide-field imaging camera on the prime focus of the 8.2m Subaru telescope on the summit of Maunakea in Hawaii. A team of scientists from Japan, Taiwan and Princeton University is using HSC to carry out a 300-night multi-band imaging survey of the high-latitude sky. The survey includes three layers: the Wide layer will cover 1400 deg$^2$ in five broad bands ($grizy$), with a $5\,σ$ point-source depth of $r \approx 26$. The Deep layer covers a total of 26~deg$^2$ in four fields, going roughly a magnitude fainter, while the UltraDeep layer goes almost a magnitude fainter still in two pointings of HSC (a total of 3.5 deg$^2$). Here we describe the instrument, the science goals of the survey, and the survey strategy and data processing. This paper serves as an introduction to a special issue of the Publications of the Astronomical Society of Japan, which includes a large number of technical and scientific papers describing results from the early phases of this survey.
△ Less
Submitted 15 March, 2018; v1 submitted 19 April, 2017;
originally announced April 2017.
-
Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs). II. Discovery of 32 Quasars and Luminous Galaxies at 5.7 < z < 6.8
Authors:
Yoshiki Matsuoka,
Masafusa Onoue,
Nobunari Kashikawa,
Kazushi Iwasawa,
Michael A. Strauss,
Tohru Nagao,
Masatoshi Imanishi,
Chien-Hsiu Lee,
Masayuki Akiyama,
Naoko Asami,
James Bosch,
Sebastien Foucaud,
Hisanori Furusawa,
Tomotsugu Goto,
James E. Gunn,
Yuichi Harikane,
Hiroyuki Ikeda,
Takuma Izumi,
Toshihiro Kawaguchi,
Satoshi Kikuta,
Kotaro Kohno,
Yutaka Komiyama,
Robert H. Lupton,
Takeo Minezaki,
Satoshi Miyazaki
, et al. (21 additional authors not shown)
Abstract:
We present spectroscopic identification of 32 new quasars and luminous galaxies discovered at 5.7 < z < 6.8. This is the second in a series of papers presenting the results of the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the deep multi-band imaging data produced by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. The photometric candidates w…
▽ More
We present spectroscopic identification of 32 new quasars and luminous galaxies discovered at 5.7 < z < 6.8. This is the second in a series of papers presenting the results of the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the deep multi-band imaging data produced by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. The photometric candidates were selected by a Bayesian probabilistic algorithm, and then observed with spectrographs on the Gran Telescopio Canarias and the Subaru Telescope. Combined with the sample presented in the previous paper, we have now identified 64 HSC sources over about 430 deg2, which include 33 high-z quasars, 14 high-z luminous galaxies, 2 [O III] emitters at z ~ 0.8, and 15 Galactic brown dwarfs. The new quasars have considerably lower luminosity (M1450 ~ -25 to -22 mag) than most of the previously known high-z quasars. Several of these quasars have luminous (> 10^(43) erg/s) and narrow (< 500 km/s) Ly alpha lines, and also a possible mini broad absorption line system of N V 1240 in the composite spectrum, which clearly separate them from typical quasars. On the other hand, the high-z galaxies have extremely high luminosity (M1450 ~ -24 to -22 mag) compared to other galaxies found at similar redshift. With the discovery of these new classes of objects, we are opening up new parameter spaces in the high-z Universe. Further survey observations and follow-up studies of the identified objects, including the construction of the quasar luminosity function at z ~ 6, are ongoing.
△ Less
Submitted 9 June, 2017; v1 submitted 19 April, 2017;
originally announced April 2017.
-
Sloan Digital Sky Survey IV: Mapping the Milky Way, Nearby Galaxies, and the Distant Universe
Authors:
Michael R. Blanton,
Matthew A. Bershady,
Bela Abolfathi,
Franco D. Albareti,
Carlos Allende Prieto,
Andres Almeida,
Javier Alonso-García,
Friedrich Anders,
Scott F. Anderson,
Brett Andrews,
Erik Aquino-Ortíz,
Alfonso Aragón-Salamanca,
Maria Argudo-Fernández,
Eric Armengaud,
Eric Aubourg,
Vladimir Avila-Reese,
Carles Badenes,
Stephen Bailey,
Kathleen A. Barger,
Jorge Barrera-Ballesteros,
Curtis Bartosz,
Dominic Bates,
Falk Baumgarten,
Julian Bautista,
Rachael Beaton
, et al. (328 additional authors not shown)
Abstract:
We describe the Sloan Digital Sky Survey IV (SDSS-IV), a project encompassing three major spectroscopic programs. The Apache Point Observatory Galactic Evolution Experiment 2 (APOGEE-2) is observing hundreds of thousands of Milky Way stars at high resolution and high signal-to-noise ratio in the near-infrared. The Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey is obtaining spat…
▽ More
We describe the Sloan Digital Sky Survey IV (SDSS-IV), a project encompassing three major spectroscopic programs. The Apache Point Observatory Galactic Evolution Experiment 2 (APOGEE-2) is observing hundreds of thousands of Milky Way stars at high resolution and high signal-to-noise ratio in the near-infrared. The Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey is obtaining spatially-resolved spectroscopy for thousands of nearby galaxies (median redshift of z = 0.03). The extended Baryon Oscillation Spectroscopic Survey (eBOSS) is mapping the galaxy, quasar, and neutral gas distributions between redshifts z = 0.6 and 3.5 to constrain cosmology using baryon acoustic oscillations, redshift space distortions, and the shape of the power spectrum. Within eBOSS, we are conducting two major subprograms: the SPectroscopic IDentification of eROSITA Sources (SPIDERS), investigating X-ray AGN and galaxies in X-ray clusters, and the Time Domain Spectroscopic Survey (TDSS), obtaining spectra of variable sources. All programs use the 2.5-meter Sloan Foundation Telescope at Apache Point Observatory; observations there began in Summer 2014. APOGEE-2 also operates a second near-infrared spectrograph at the 2.5-meter du Pont Telescope at Las Campanas Observatory, with observations beginning in early 2017. Observations at both facilities are scheduled to continue through 2020. In keeping with previous SDSS policy, SDSS-IV provides regularly scheduled public data releases; the first one, Data Release 13, was made available in July 2016.
△ Less
Submitted 29 June, 2017; v1 submitted 28 February, 2017;
originally announced March 2017.
-
First Data Release of the Hyper Suprime-Cam Subaru Strategic Program
Authors:
Hiroaki Aihara,
Robert Armstrong,
Steven Bickerton,
James Bosch,
Jean Coupon,
Hisanori Furusawa,
Yusuke Hayashi,
Hiroyuki Ikeda,
Yukiko Kamata,
Hiroshi Karoji,
Satoshi Kawanomoto,
Michitaro Koike,
Yutaka Komiyama,
Robert H. Lupton,
Sogo Mineo,
Hironao Miyatake,
Satoshi Miyazaki,
Tomoki Morokuma,
Yoshiyuki Obuchi,
Yukie Oishi,
Yuki Okura,
Paul A. Price,
Tadafumi Takata,
Manobu M. Tanaka,
Masayuki Tanaka
, et al. (83 additional authors not shown)
Abstract:
The Hyper Suprime-Cam Subaru Strategic Program (HSC-SSP) is a three-layered imaging survey aimed at addressing some of the most outstanding questions in astronomy today, including the nature of dark matter and dark energy. The survey has been awarded 300 nights of observing time at the Subaru Telescope and it started in March 2014. This paper presents the first public data release of HSC-SSP. This…
▽ More
The Hyper Suprime-Cam Subaru Strategic Program (HSC-SSP) is a three-layered imaging survey aimed at addressing some of the most outstanding questions in astronomy today, including the nature of dark matter and dark energy. The survey has been awarded 300 nights of observing time at the Subaru Telescope and it started in March 2014. This paper presents the first public data release of HSC-SSP. This release includes data taken in the first 1.7 years of observations (61.5 nights) and each of the Wide, Deep, and UltraDeep layers covers about 108, 26, and 4 square degrees down to depths of i~26.4, ~26.5, and ~27.0 mag, respectively (5sigma for point sources). All the layers are observed in five broad bands (grizy), and the Deep and UltraDeep layers are observed in narrow bands as well. We achieve an impressive image quality of 0.6 arcsec in the i-band in the Wide layer. We show that we achieve 1-2 per cent PSF photometry (rms) both internally and externally (against Pan-STARRS1), and ~10 mas and 40 mas internal and external astrometric accuracy, respectively. Both the calibrated images and catalogs are made available to the community through dedicated user interfaces and database servers. In addition to the pipeline products, we also provide value-added products such as photometric redshifts and a collection of public spectroscopic redshifts. Detailed descriptions of all the data can be found online. The data release website is https://hsc-release.mtk.nao.ac.jp/.
△ Less
Submitted 28 July, 2017; v1 submitted 27 February, 2017;
originally announced February 2017.
-
SUBARU prime focus spectrograph: integration, testing and performance for the first spectrograph
Authors:
F. Madec,
A. Le Fur,
D. Le Mignant,
K. Dohlen,
R. Barrette,
M. Belhadi,
S. Pascal,
S. Smee,
J. Gunn,
J. Le Merrer,
M. Lorred,
M. Jaquet,
P. Balard,
P. Blanchard,
W. Thao,
F. Roman,
V. Lapere,
JF Gabriel,
C. Loomis,
M. Golebiowski,
M. Hart,
L. Oliveira,
A. Oliveira,
N. Tamura,
A. Shimono
Abstract:
The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project for Subaru telescope consists in four identical spectrographs fed by 600 fibers each. Each spectrograph is composed by an optical entrance unit that creates a collimated beam and distributes the light to three channels, two visibles and one near infrared. This paper presents the on-going effort fo…
▽ More
The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project for Subaru telescope consists in four identical spectrographs fed by 600 fibers each. Each spectrograph is composed by an optical entrance unit that creates a collimated beam and distributes the light to three channels, two visibles and one near infrared. This paper presents the on-going effort for the tests & integration process for the first spectrograph channel: we have developed a detailed Assembly Integration and Test (AIT) plan, as well as the methods, detailed processes and I&T tools. We describe the tools we designed to assemble the parts and to test the performance of the spectrograph. We also report on the thermal acceptance tests we performed on the first visible camera unit. We also report on and discuss the technical difficulties that did appear during this integration phase. Finally, we detail the important logistic process that is require to transport the components from other country to Marseille.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
Visible camera cryostat design and performance for the SuMIRe Prime Focus Spectrograph (PFS)
Authors:
Stephen A. Smee,
James E. Gunn,
Mirek Golebiowski,
Stephen C. Hope,
Fabrice Madec,
Jean-Francois Gabriel,
Craig Loomis,
Arnaud Le Fur,
Kjetil Dohlen,
David Le Mignant,
Robert Barkhouser,
Michael Carr,
Murdock Hart,
Naoyuki Tamura,
Atsushi Shimono,
Naruhisa Takato
Abstract:
We describe the design and performance of the SuMIRe Prime Focus Spectrograph (PFS) visible camera cryostats. SuMIRe PFS is a massively multi-plexed ground-based spectrograph consisting of four identical spectrograph modules, each receiving roughly 600 fibers from a 2394 fiber robotic positioner at the prime focus. Each spectrograph module has three channels covering wavelength ranges 380~nm -- 64…
▽ More
We describe the design and performance of the SuMIRe Prime Focus Spectrograph (PFS) visible camera cryostats. SuMIRe PFS is a massively multi-plexed ground-based spectrograph consisting of four identical spectrograph modules, each receiving roughly 600 fibers from a 2394 fiber robotic positioner at the prime focus. Each spectrograph module has three channels covering wavelength ranges 380~nm -- 640~nm, 640~nm -- 955~nm, and 955~nm -- 1.26~um, with the dispersed light being imaged in each channel by a f/1.07 vacuum Schmidt camera. The cameras are very large, having a clear aperture of 300~mm at the entrance window, and a mass of $\sim$280~kg. In this paper we describe the design of the visible camera cryostats and discuss various aspects of cryostat performance.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
A Novel Reflectometer for Relative Reflectance Measurements of CCDs
Authors:
Murdock Hart,
Robert H. Barkhouser,
James E. Gunn,
Stephen A. Smee
Abstract:
The high quantum efficiencies (QE) of backside illuminated charge coupled devices (CCD) has ushered in the age of the large scale astronomical survey. The QE of these devices can be greater than 90 %, and is dependent upon the operating temperature, device thickness, backside charging mechanisms, and anti-reflection (AR) coatings. But at optical wavelengths the QE is well approximated as one minus…
▽ More
The high quantum efficiencies (QE) of backside illuminated charge coupled devices (CCD) has ushered in the age of the large scale astronomical survey. The QE of these devices can be greater than 90 %, and is dependent upon the operating temperature, device thickness, backside charging mechanisms, and anti-reflection (AR) coatings. But at optical wavelengths the QE is well approximated as one minus the reflectance, thus the measurement of the backside reflectivity of these devices provides a second independent measure of their QE.
We have designed and constructed a novel instrument to measure the relative specular reflectance of CCD detectors, with a significant portion of this device being constructed using a 3D fused deposition model (FDM) printer. This device implements both a monitor and measurement photodiode to simultaneously collect incident and reflected measurements reducing errors introduced by the relative reflectance calibration process. While most relative reflectometers are highly dependent upon a precisely repeatable target distance for accurate measurements, we have implemented a method of measurement which minimizes these errors.
Using the reflectometer we have measured the reflectance of two types of Hamamatsu CCD detectors. The first device is a Hamamatsu 2k x 4k backside illuminated high resistivity p-type silicon detector which has been optimized to operate in the blue from 380 nm - 650 nm. The second detector being a 2k x 4k backside illuminated high resistivity p-type silicon detector optimized for use in the red from 640 nm - 960 nm. We have not only been able to measure the reflectance of these devices as a function of wavelength we have also sampled the reflectance as a function of position on the device, and found a reflection gradient across these devices.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
Prime Focus Spectrograph (PFS) for the Subaru Telescope: Overview, recent progress, and future perspectives
Authors:
Naoyuki Tamura,
Naruhisa Takato,
Atsushi Shimono,
Yuki Moritani,
Kiyoto Yabe,
Yuki Ishizuka,
Akitoshi Ueda,
Yukiko Kamata,
Hrand Aghazarian,
Stephane Arnouts,
Gabriel Barban,
Robert H. Barkhouser,
Renato C. Borges,
David F. Braun,
Michael A. Carr,
Pierre-Yves Chabaud,
Yin-Chang Chang,
Hsin-Yo Chen,
Masashi Chiba,
Richard C. Y. Chou,
You-Hua Chu,
Judith G. Cohen,
Rodrigo P. de Almeida,
Antonio C. de Oliveira,
Ligia S. de Oliveira
, et al. (75 additional authors not shown)
Abstract:
PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simult…
▽ More
PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously observe spectra from 380nm to 1260nm in one exposure at a resolution of ~1.6-2.7A. An international collaboration is developing this instrument under the initiative of Kavli IPMU. The project is now going into the construction phase aiming at undertaking system integration in 2017-2018 and subsequently carrying out engineering operations in 2018-2019. This article gives an overview of the instrument, current project status and future paths forward.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
Metrology Camera System of Prime Focus Spectrograph for Subaru Telescope
Authors:
Shiang-Yu Wang,
Richard C. Y. Chou,
Pin-Jie Huang,
Hung-Hsu Ling,
Jennifer Karr,
Yin-Chang Chang,
Yen-Shan Hu,
Shu-Fu Hsu,
Hsin-Yo Chen,
James E. Gunn,
Dan J. Reiley,
Naoyuki Tamura,
Naruhisa Takato,
Atsushi Shimono
Abstract:
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. PFS will cover a 1.3 degree diameter field with 2394 fibers to complement the imaging capabilities of Hyper SuprimeCam. To retain high throughput, the final positioning accuracy between the fibers and observing targets of PFS is required to be less t…
▽ More
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. PFS will cover a 1.3 degree diameter field with 2394 fibers to complement the imaging capabilities of Hyper SuprimeCam. To retain high throughput, the final positioning accuracy between the fibers and observing targets of PFS is required to be less than 10um. The metrology camera system (MCS) serves as the optical encoder of the fiber motors for the configuring of fibers. MCS provides the fiber positions within a 5um error over the 45 cm focal plane. The information from MCS will be fed into the fiber positioner control system for the closed loop control. MCS will be located at the Cassegrain focus of Subaru telescope in order to to cover the whole focal plane with one 50M pixel Canon CMOS camera. It is a 380mm Schmidt type telescope which generates a uniform spot size with a 10 micron FWHM across the field for reasonable sampling of PSF. Carbon fiber tubes are used to provide a stable structure over the operating conditions without focus adjustments. The CMOS sensor can be read in 0.8s to reduce the overhead for the fiber configuration. The positions of all fibers can be obtained within 0.5s after the readout of the frame. This enables the overall fiber configuration to be less than 2 minutes. MCS will be installed inside a standard Subaru Cassgrain Box. All components that generate heat are located inside a glycol cooled cabinet to reduce the possible image motion due to heat. The optics and camera for MCS have been delivered and tested. The mechanical parts and supporting structure are ready as of spring 2016. The integration of MCS will start in the summer of 2016.
△ Less
Submitted 1 August, 2016;
originally announced August 2016.
-
The Current Status of Prime Focus Instrument of Subaru Prime Focus Spectrograph
Authors:
Shiang-Yu Wang,
Mark A. Schwochert,
Pin-Jie Huang,
Hsin-Yo Chen,
Masahiko Kimura,
Richard C. Y. Chou,
Yin-Chang Chang,
Yen-Sang Hu,
Hung-Hsu Ling,
Chaz N. Morantz,
Dan J. Reiley,
Peter Mao,
David F. Braun,
Chih-Yi Wen,
Chi-Hung Yan,
Jennifer Karr,
James E. Gunn,
Graham Murray,
Naoyuki Tamura,
Naruhisa Takato,
Atsushi Shimono,
Decio Ferreira,
Leandro Henriqu dos Santosh,
Ligia Souza Oliveira,
Antonio Cesar de Oliveira
, et al. (1 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degree diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope…
▽ More
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degree diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope and also accommodates the optical bench in which Cobra fiber positioners are located. In addition, the acquisition and guiding cameras (AGCs), the optical fiber positioner system, the cable wrapper, the fiducial fibers, illuminator, and viewer, the field element, and the telemetry system are located inside the PFI. The mechanical structure of the PFI was designed with special care such that its deflections sufficiently match those of the HSC's Wide Field Corrector (WFC) so the fibers will stay on targets over the course of the observations within the required accuracy. In this report, the latest status of PFI development will be given including the performance of PFI components, the setup and performance of the integration and testing equipment.
△ Less
Submitted 1 August, 2016;
originally announced August 2016.
-
SDSS-IV MaNGA IFS Galaxy Survey --- Survey Design, Execution, and Initial Data Quality
Authors:
Renbin Yan,
Kevin Bundy,
David R. Law,
Matthew A. Bershady,
Brett Andrews,
Brian Cherinka,
Aleksandar M. Diamond-Stanic,
Niv Drory,
Nicholas MacDonald,
José R. Sánchez-Gallego,
Daniel Thomas,
David A. Wake,
Anne-Marie Weijmans,
Kyle B. Westfall,
Kai Zhang,
Alfonso Aragón-Salamanca,
Francesco Belfiore,
Dmitry Bizyaev,
Guillermo A. Blanc,
Michael R. Blanton,
Joel Brownstein,
Michele Cappellari,
Richard D'Souza,
Eric Emsellem,
Hai Fu
, et al. (25 additional authors not shown)
Abstract:
The MaNGA Survey (Mapping Nearby Galaxies at Apache Point Observatory) is one of three core programs in the Sloan Digital Sky Survey IV. It is obtaining integral field spectroscopy (IFS) for 10K nearby galaxies at a spectral resolution of R~2000 from 3,622-10,354A. The design of the survey is driven by a set of science requirements on the precision of estimates of the following properties: star fo…
▽ More
The MaNGA Survey (Mapping Nearby Galaxies at Apache Point Observatory) is one of three core programs in the Sloan Digital Sky Survey IV. It is obtaining integral field spectroscopy (IFS) for 10K nearby galaxies at a spectral resolution of R~2000 from 3,622-10,354A. The design of the survey is driven by a set of science requirements on the precision of estimates of the following properties: star formation rate surface density, gas metallicity, stellar population age, metallicity, and abundance ratio, and their gradients; stellar and gas kinematics; and enclosed gravitational mass as a function of radius. We describe how these science requirements set the depth of the observations and dictate sample selection. The majority of targeted galaxies are selected to ensure uniform spatial coverage in units of effective radius (Re) while maximizing spatial resolution. About 2/3 of the sample is covered out to 1.5Re (Primary sample), and 1/3 of the sample is covered to 2.5Re (Secondary sample). We describe the survey execution with details that would be useful in the design of similar future surveys. We also present statistics on the achieved data quality, specifically, the point spread function, sampling uniformity, spectral resolution, sky subtraction, and flux calibration. For our Primary sample, the median r-band signal-to-noise ratio is ~73 per 1.4A pixel for spectra stacked between 1-1.5 Re. Measurements of various galaxy properties from the first year data show that we are meeting or exceeding the defined requirements for the majority of our science goals.
△ Less
Submitted 2 August, 2016; v1 submitted 28 July, 2016;
originally announced July 2016.
-
Robust detection of CID double stars in SDSS
Authors:
D. Pourbaix,
G. R. Knapp,
J. E. Gunn,
R. H. Lupton,
Z. Ivezic,
C. Siopis,
M. Rigaux,
A. Rubbens
Abstract:
Aims. The Sloan Digital Sky Survey (SDSS) offers a unique possibility of not only detecting Colour Induced Displacement (CID) double stars but also confirming these detections. Methods. Successive cuts are applied to the SDSS DR12 database in order to reduce the size of the sample to be considered. The resulting dataset is then screened with a criterion based on the distance and orientation of the…
▽ More
Aims. The Sloan Digital Sky Survey (SDSS) offers a unique possibility of not only detecting Colour Induced Displacement (CID) double stars but also confirming these detections. Methods. Successive cuts are applied to the SDSS DR12 database in order to reduce the size of the sample to be considered. The resulting dataset is then screened with a criterion based on the distance and orientation of the photocentres in different photometric bands. Results. About 3 200 distinct objects are classified as CID double stars, 40 of which are confirmed with at least a second detection. A consistency check further validates these detections.
△ Less
Submitted 11 May, 2016;
originally announced May 2016.
-
Subaru high-z exploration of low-luminosity quasars (SHELLQs). I. Discovery of 15 quasars and bright galaxies at 5.7 < z < 6.9
Authors:
Yoshiki Matsuoka,
Masafusa Onoue,
Nobunari Kashikawa,
Kazushi Iwasawa,
Michael A. Strauss,
Tohru Nagao,
Masatoshi Imanishi,
Mana Niida,
Yoshiki Toba,
Masayuki Akiyama,
Naoko Asami,
James Bosch,
Sébastien Foucaud,
Hisanori Furusawa,
Tomotsugu Goto,
James E. Gunn,
Yuichi Harikane,
Hiroyuki Ikeda,
Toshihiro Kawaguchi,
Satoshi Kikuta,
Yutaka Komiyama,
Robert H. Lupton,
Takeo Minezaki,
Satoshi Miyazaki,
Tomoki Morokuma
, et al. (14 additional authors not shown)
Abstract:
We report the discovery of 15 quasars and bright galaxies at 5.7 < z < 6.9. This is the initial result from the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the exquisite multiband imaging data produced by the Subaru Hyper Suprime-Cam (HSC) Strategic Program survey. The candidate selection is performed by combining several photometric approaches including a…
▽ More
We report the discovery of 15 quasars and bright galaxies at 5.7 < z < 6.9. This is the initial result from the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the exquisite multiband imaging data produced by the Subaru Hyper Suprime-Cam (HSC) Strategic Program survey. The candidate selection is performed by combining several photometric approaches including a Bayesian probabilistic algorithm to reject stars and dwarfs. The spectroscopic identification was carried out with the Gran Telescopio Canarias and the Subaru Telescope for the first 80 deg2 of the survey footprint. The success rate of our photometric selection is quite high, approaching 100 % at the brighter magnitudes (zAB < 23.5 mag). Our selection also recovered all the known high-z quasars on the HSC images. Among the 15 discovered objects, six are likely quasars, while the other six with interstellar absorption lines and in some cases narrow emission lines are likely bright Lyman-break galaxies. The remaining three objects have weak continua and very strong and narrow Ly alpha lines, which may be excited by ultraviolet light from both young stars and quasars. These results indicate that we are starting to see the steep rise of the luminosity function of z > 6 galaxies, compared with that of quasars, at magnitudes fainter than M1450 ~ -22 mag or zAB ~24 mag. Follow-up studies of the discovered objects as well as further survey observations are ongoing.
△ Less
Submitted 4 September, 2016; v1 submitted 7 March, 2016;
originally announced March 2016.
-
SDSS-IV/MaNGA: Spectrophotometric Calibration Technique
Authors:
Renbin Yan,
Christy Tremonti,
Matthew A. Bershady,
David R. Law,
David J. Schlegel,
Kevin Bundy,
Niv Drory,
Nicholas MacDonald,
Dmitry Bizyaev,
Guillermo A. Blanc,
Michael R. Blanton,
Brian Cherinka,
Arthur Eigenbrot,
James E. Gunn,
Paul Harding,
David W. Hogg,
José R. Sánchez-Gallego,
Sebastian F. Sánchez,
David A. Wake,
Anne-Marie Weijmans,
Ting Xiao,
Kai Zhang
Abstract:
Mapping Nearby Galaxies at Apache Point Observatory (MaNGA), one of three core programs in the Sloan Digital Sky Survey-IV (SDSS-IV), is an integral-field spectroscopic (IFS) survey of roughly 10,000 nearby galaxies. It employs dithered observations using 17 hexagonal bundles of 2 arcsec fibers to obtain resolved spectroscopy over a wide wavelength range of 3,600-10,300A. To map the internal varia…
▽ More
Mapping Nearby Galaxies at Apache Point Observatory (MaNGA), one of three core programs in the Sloan Digital Sky Survey-IV (SDSS-IV), is an integral-field spectroscopic (IFS) survey of roughly 10,000 nearby galaxies. It employs dithered observations using 17 hexagonal bundles of 2 arcsec fibers to obtain resolved spectroscopy over a wide wavelength range of 3,600-10,300A. To map the internal variations within each galaxy, we need to perform accurate {\it spectral surface photometry}, which is to calibrate the specific intensity at every spatial location sampled by each individual aperture element of the integral field unit. The calibration must correct only for the flux loss due to atmospheric throughput and the instrument response, but not for losses due to the finite geometry of the fiber aperture. This requires the use of standard star measurements to strictly separate these two flux loss factors (throughput versus geometry), a difficult challenge with standard single-fiber spectroscopy techniques due to various practical limitations. Therefore, we developed a technique for spectral surface photometry using multiple small fiber-bundles targeting standard stars simultaneously with galaxy observations. We discuss the principles of our approach and how they compare to previous efforts, and we demonstrate the precision and accuracy achieved. MaNGA's relative calibration between the wavelengths of H$α$ and H$β$ has a root-mean-square (RMS) of 1.7%, while that between [NII] $λ$6583A and [OII] $λ$3727A has an RMS of 4.7%. Using extinction-corrected star formation rates and gas-phase metallicities as an illustration, this level of precision guarantees that flux calibration errors will be sub-dominant when estimating these quantities. The absolute calibration is better than 5% for more than 89% of MaNGA's wavelength range.
△ Less
Submitted 4 November, 2015;
originally announced November 2015.
-
The Apache Point Observatory Galactic Evolution Experiment (APOGEE)
Authors:
Steven R. Majewski,
Ricardo P. Schiavon,
Peter M. Frinchaboy,
Carlos Allende Prieto,
Robert Barkhouser,
Dmitry Bizyaev,
Basil Blank,
Sophia Brunner,
Adam Burton,
Ricardo Carrera,
S. Drew Chojnowski,
Katia Cunha,
Courtney Epstein,
Greg Fitzgerald,
Ana E. Garcia Perez,
Fred R. Hearty,
Chuck Henderson,
Jon A. Holtzman,
Jennifer A. Johnson,
Charles R. Lam,
James E. Lawler,
Paul Maseman,
Szabolcs Meszaros,
Matthew Nelson,
Duy Coung Nguyen
, et al. (53 additional authors not shown)
Abstract:
The Apache Point Observatory Galactic Evolution Experiment (APOGEE), one of the programs in the Sloan Digital Sky Survey III (SDSS-III), has now completed its systematic, homogeneous spectroscopic survey sampling all major populations of the Milky Way. After a three year observing campaign on the Sloan 2.5-m Telescope, APOGEE has collected a half million high resolution (R~22,500), high S/N (>100)…
▽ More
The Apache Point Observatory Galactic Evolution Experiment (APOGEE), one of the programs in the Sloan Digital Sky Survey III (SDSS-III), has now completed its systematic, homogeneous spectroscopic survey sampling all major populations of the Milky Way. After a three year observing campaign on the Sloan 2.5-m Telescope, APOGEE has collected a half million high resolution (R~22,500), high S/N (>100), infrared (1.51-1.70 microns) spectra for 146,000 stars, with time series information via repeat visits to most of these stars. This paper describes the motivations for the survey and its overall design---hardware, field placement, target selection, operations---and gives an overview of these aspects as well as the data reduction, analysis and products. An index is also given to the complement of technical papers that describe various critical survey components in detail. Finally, we discuss the achieved survey performance and illustrate the variety of potential uses of the data products by way of a number of science demonstrations, which span from time series analysis of stellar spectral variations and radial velocity variations from stellar companions, to spatial maps of kinematics, metallicity and abundance patterns across the Galaxy and as a function of age, to new views of the interstellar medium, the chemistry of star clusters, and the discovery of rare stellar species. As part of SDSS-III Data Release 12, all of the APOGEE data products are now publicly available.
△ Less
Submitted 17 September, 2015;
originally announced September 2015.
-
Prime Focus Spectrograph for the Subaru telescope: massively multiplexed optical and near-infrared fiber spectrograph
Authors:
Hajime Sugai,
Naoyuki Tamura,
Hiroshi Karoji,
Atsushi Shimono,
Naruhisa Takato,
Masahiko Kimura,
Youichi Ohyama,
Akitoshi Ueda,
Hrand Aghazarian,
Marcio Vital de Arruda,
Robert H. Barkhouser,
Charles L. Bennett,
Steve Bickerton,
Alexandre Bozier,
David F. Braun,
Khanh Bui,
Christopher M. Capocasale,
Michael A. Carr,
Bruno Castilho,
Yin-Chang Chang,
Hsin-Yo Chen,
Richard C. Y. Chou,
Olivia R. Dawson,
Richard G. Dekany,
Eric M. Ek
, et al. (59 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multifiber spectrograph with 2394 science fibers distributed across a 1.3-deg diameter field of view at the Subaru 8.2-m telescope. The wide wavelength coverage from 0.38 μm to 1.26 μm, with a resolving power of 3000, simultaneously strengthens its ability to target three main survey programs: cosmology, galactic archaeology and galaxy…
▽ More
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multifiber spectrograph with 2394 science fibers distributed across a 1.3-deg diameter field of view at the Subaru 8.2-m telescope. The wide wavelength coverage from 0.38 μm to 1.26 μm, with a resolving power of 3000, simultaneously strengthens its ability to target three main survey programs: cosmology, galactic archaeology and galaxy/AGN evolution. A medium resolution mode with a resolving power of 5000 for 0.71 μm to 0.89 μm will also be available by simply exchanging dispersers. We highlight some of the technological aspects of the design. To transform the telescope focal ratio, a broad-band coated microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of the cable system, optimizing overall throughput; a fiber with low focal ratio degradation is selected for the fiber-positioner and fiber-slit components, minimizing the effects of fiber movements and fiber bending. Fiber positioning will be performed by a positioner consisting of two stages of piezo-electric rotary motors. The positions of these motors are measured by taking an image of artificially back-illuminated fibers with the metrology camera located in the Cassegrain container; the fibers are placed in the proper location by iteratively measuring and then adjusting the positions of the motors. Target light reaches one of the four identical fast-Schmidt spectrograph modules, each with three arms. The PFS project has passed several project-wide design reviews and is now in the construction phase.
△ Less
Submitted 2 July, 2015;
originally announced July 2015.
-
Properties of Weak Lensing Clusters Detected on Hyper Suprime-Cam 2.3 Square Degree Field
Authors:
Satoshi Miyazaki,
Masamune Oguri,
Takashi Hamana,
Masayuki Tanaka,
Lance Miller,
Yousuke Utsumi,
Yutaka Komiyama,
Hisanori Furusawa,
Junya Sakurai,
Satoshi Kawanomoto,
Fumiaki Nakata,
Fumihiro Uraguchi,
Michitaro Koike,
Daigo Tomono,
Robert Lupton,
James Gunn,
Hiroshi Karoji,
Hiroaki Aihara,
Hitoshi Murayama,
Masahiro Takada
Abstract:
We present properties of moderately massive clusters of galaxies detected by the newly developed Hyper Suprime-Cam on the Subaru telescope using weak gravitational lensing. Eight peaks exceeding a S/N ratio of 4.5 are identified on the convergence S/N map of a 2.3 square degree field observed during the early commissioning phase of the camera. Multi-color photometric data is used to generate optic…
▽ More
We present properties of moderately massive clusters of galaxies detected by the newly developed Hyper Suprime-Cam on the Subaru telescope using weak gravitational lensing. Eight peaks exceeding a S/N ratio of 4.5 are identified on the convergence S/N map of a 2.3 square degree field observed during the early commissioning phase of the camera. Multi-color photometric data is used to generate optically selected clusters using the CAMIRA algorithm. The optical cluster positions were correlated with the peak positions from the convergence map. All eight significant peaks have optical counterparts. The velocity dispersion of clusters are evaluated by adopting the Singular Isothemal Sphere (SIS) fit to the tangential shear profiles, yielding virial mass estimates, M500c, of the clusters which range from 2.7x10^13 to 4.4x10^14 solar mass. The number of peaks is considerably larger than the average number expected from LambdaCDM cosmology but this is not extremely unlikely if one takes the large sample variance in the small field into account. We could, however, safely argue that the peak count strongly favours the recent Planck result suggesting high sigma8$value of 0.83. The ratio of stellar mass to the dark matter halo mass shows a clear decline as the halo mass increases. If the gas mass fraction, fg, in halos is universal, as has been suggested in the literature, the observed baryon mass in stars and gas shows a possible deficit compared with the total baryon density estimated from the baryon oscillation peaks in anisotropy of the cosmic microwave background.
△ Less
Submitted 27 April, 2015;
originally announced April 2015.
-
The Eleventh and Twelfth Data Releases of the Sloan Digital Sky Survey: Final Data from SDSS-III
Authors:
Shadab Alam,
Franco D. Albareti,
Carlos Allende Prieto,
F. Anders,
Scott F. Anderson,
Brett H. Andrews,
Eric Armengaud,
Éric Aubourg,
Stephen Bailey,
Julian E. Bautista,
Rachael L. Beaton,
Timothy C. Beers,
Chad F. Bender,
Andreas A. Berlind,
Florian Beutler,
Vaishali Bhardwaj,
Jonathan C. Bird,
Dmitry Bizyaev,
Cullen H. Blake,
Michael R. Blanton,
Michael Blomqvist,
John J. Bochanski,
Adam S. Bolton,
Jo Bovy,
A. Shelden Bradley
, et al. (249 additional authors not shown)
Abstract:
The third generation of the Sloan Digital Sky Survey (SDSS-III) took data from 2008 to 2014 using the original SDSS wide-field imager, the original and an upgraded multi-object fiber-fed optical spectrograph, a new near-infrared high-resolution spectrograph, and a novel optical interferometer. All the data from SDSS-III are now made public. In particular, this paper describes Data Release 11 (DR11…
▽ More
The third generation of the Sloan Digital Sky Survey (SDSS-III) took data from 2008 to 2014 using the original SDSS wide-field imager, the original and an upgraded multi-object fiber-fed optical spectrograph, a new near-infrared high-resolution spectrograph, and a novel optical interferometer. All the data from SDSS-III are now made public. In particular, this paper describes Data Release 11 (DR11) including all data acquired through 2013 July, and Data Release 12 (DR12) adding data acquired through 2014 July (including all data included in previous data releases), marking the end of SDSS-III observing. Relative to our previous public release (DR10), DR12 adds one million new spectra of galaxies and quasars from the Baryon Oscillation Spectroscopic Survey (BOSS) over an additional 3000 sq. deg of sky, more than triples the number of H-band spectra of stars as part of the Apache Point Observatory (APO) Galactic Evolution Experiment (APOGEE), and includes repeated accurate radial velocity measurements of 5500 stars from the Multi-Object APO Radial Velocity Exoplanet Large-area Survey (MARVELS). The APOGEE outputs now include measured abundances of 15 different elements for each star. In total, SDSS-III added 2350 sq. deg of ugriz imaging; 155,520 spectra of 138,099 stars as part of the Sloan Exploration of Galactic Understanding and Evolution 2 (SEGUE-2) survey; 2,497,484 BOSS spectra of 1,372,737 galaxies, 294,512 quasars, and 247,216 stars over 9376 sq. deg; 618,080 APOGEE spectra of 156,593 stars; and 197,040 MARVELS spectra of 5,513 stars. Since its first light in 1998, SDSS has imaged over 1/3 of the Celestial sphere in five bands and obtained over five million astronomical spectra.
△ Less
Submitted 21 May, 2015; v1 submitted 5 January, 2015;
originally announced January 2015.
-
The MaNGA Integral Field Unit Fiber Feed System for the Sloan 2.5 m Telescope
Authors:
N. Drory,
N. MacDonald,
M. A. Bershady,
K. Bundy,
J. Gunn,
D. R. Law,
M. Smith,
R. Stoll,
C. A. Tremonti,
D. A. Wake,
R. Yan,
A. M. Weijmans,
N. Byler,
B. Cherinka,
F. Cope,
A. Eigenbrot,
P. Harding,
D. Holder,
J. Huehnerhoff,
K. Jaehnig,
T. C. Jansen,
M. Klaene,
A. M. Paat,
J. Percival,
C. Sayres
Abstract:
We describe the design, manufacture, and performance of bare-fiber integral field units (IFUs) for the SDSS-IV survey MaNGA (Mapping Nearby Galaxies at APO) on the the Sloan 2.5 m telescope at Apache Point Observatory (APO). MaNGA is a luminosity-selected integral-field spectroscopic survey of 10,000 local galaxies covering 360-1030 nm at R ~ 2200. The IFUs have hexagonal dense packing of fibers w…
▽ More
We describe the design, manufacture, and performance of bare-fiber integral field units (IFUs) for the SDSS-IV survey MaNGA (Mapping Nearby Galaxies at APO) on the the Sloan 2.5 m telescope at Apache Point Observatory (APO). MaNGA is a luminosity-selected integral-field spectroscopic survey of 10,000 local galaxies covering 360-1030 nm at R ~ 2200. The IFUs have hexagonal dense packing of fibers with packing regularity of 3 um (RMS), and throughput of 96+/-0.5% from 350 nm to 1 um in the lab. Their sizes range from 19 to 127 fibers (3-7 hexagonal layers) using Polymicro FBP 120:132:150 um core:clad:buffer fibers to reach a fill fraction of 56%. High throughput (and low focal-ratio degradation) is achieved by maintaining the fiber cladding and buffer intact, ensuring excellent surface polish, and applying a multi-layer AR coating of the input and output surfaces. In operations on-sky, the IFUs show only an additional 2.3% FRD-related variability in throughput despite repeated mechanical stressing during plate plugging (however other losses are present). The IFUs achieve on-sky throughput 5% above the single-fiber feeds used in SDSS-III/BOSS, attributable to equivalent performance compared to single fibers and additional gains from the AR coating. The manufacturing process is geared toward mass-production of high-multiplex systems. The low-stress process involves a precision ferrule with hexagonal inner shape designed to lead inserted fibers to settle in a dense hexagonal pattern. The ferrule inner diameter is tapered at progressively shallower angles toward its tip and the final 2 mm are straight and only a few um larger than necessary to hold the desired number of fibers. This process scales to accommodate other fiber sizes and to IFUs with substantially larger fiber count. (Abridged)
△ Less
Submitted 3 December, 2014;
originally announced December 2014.
-
Overview of the SDSS-IV MaNGA Survey: Mapping Nearby Galaxies at Apache Point Observatory
Authors:
Kevin Bundy,
Matthew A. Bershady,
David R. Law,
Renbin Yan,
Niv Drory,
Nicholas MacDonald,
David A. Wake,
Brian Cherinka,
José R. Sánchez-Gallego,
Anne-Marie Weijmans,
Daniel Thomas,
Christy Tremonti,
Karen Masters,
Lodovico Coccato,
Aleksandar M. Diamond-Stanic,
Alfonso Aragón-Salamanca,
Vladimir Avila-Reese,
Carles Badenes,
Jésus Falcón-Barroso,
Francesco Belfiore,
Dmitry Bizyaev,
Guillermo A. Blanc,
Joss Bland-Hawthorn,
Michael R. Blanton,
Joel R. Brownstein
, et al. (43 additional authors not shown)
Abstract:
We present an overview of a new integral field spectroscopic survey called MaNGA (Mapping Nearby Galaxies at Apache Point Observatory), one of three core programs in the fourth-generation Sloan Digital Sky Survey (SDSS-IV) that began on 2014 July 1. MaNGA will investigate the internal kinematic structure and composition of gas and stars in an unprecedented sample of 10,000 nearby galaxies. We summ…
▽ More
We present an overview of a new integral field spectroscopic survey called MaNGA (Mapping Nearby Galaxies at Apache Point Observatory), one of three core programs in the fourth-generation Sloan Digital Sky Survey (SDSS-IV) that began on 2014 July 1. MaNGA will investigate the internal kinematic structure and composition of gas and stars in an unprecedented sample of 10,000 nearby galaxies. We summarize essential characteristics of the instrument and survey design in the context of MaNGA's key science goals and present prototype observations to demonstrate MaNGA's scientific potential. MaNGA employs dithered observations with 17 fiber-bundle integral field units that vary in diameter from 12" (19 fibers) to 32" (127 fibers). Two dual-channel spectrographs provide simultaneous wavelength coverage over 3600-10300 A at R~2000. With a typical integration time of 3 hr, MaNGA reaches a target r-band signal-to-noise ratio of 4-8 (per A, per 2" fiber) at 23 AB mag per sq. arcsec, which is typical for the outskirts of MaNGA galaxies. Targets are selected with stellar mass greater than 1e9 Msun using SDSS-I redshifts and i-band luminosity to achieve uniform radial coverage in terms of the effective radius, an approximately flat distribution in stellar mass, and a sample spanning a wide range of environments. Analysis of our prototype observations demonstrates MaNGA's ability to probe gas ionization, shed light on recent star formation and quenching, enable dynamical modeling, decompose constituent components, and map the composition of stellar populations. MaNGA's spatially resolved spectra will enable an unprecedented study of the astrophysics of nearby galaxies in the coming 6 yr.
△ Less
Submitted 3 December, 2014;
originally announced December 2014.
-
Sodium and Oxygen Abundances in the Open Cluster NGC 6791 from APOGEE H-Band Spectroscopy
Authors:
Katia Cunha,
Verne V. Smith,
Jennifer A. Johnson,
Maria Bergemann,
Szabolcs Meszaros,
Matthew D. Shetrone,
Diogo Souto,
Carlos Allende Prieto,
Ricardo P. Schiavon,
Peter Frinchaboy,
Gail Zasowski,
Dmitry Bizyaev,
Jon Holtzman,
Ana E. Garcia Perez,
Steven R. Majewski,
David Nidever,
Timothy Beers,
Ricardo Carrera,
Doug Geisler,
James Gunn,
Fred Hearty,
Inese Ivans,
Sarah Martell,
Marc Pinsonneault,
Donald P. Schneider
, et al. (5 additional authors not shown)
Abstract:
The open cluster NGC 6791 is among the oldest, most massive and metal-rich open clusters in the Galaxy. High-resolution $H$-band spectra from the Apache Point Observatory Galactic Evolution Experiment (APOGEE) of 11 red giants in NGC 6791 are analyzed for their chemical abundances of iron, oxygen, and sodium. The abundances of these three elements are found to be homogeneous (with abundance disper…
▽ More
The open cluster NGC 6791 is among the oldest, most massive and metal-rich open clusters in the Galaxy. High-resolution $H$-band spectra from the Apache Point Observatory Galactic Evolution Experiment (APOGEE) of 11 red giants in NGC 6791 are analyzed for their chemical abundances of iron, oxygen, and sodium. The abundances of these three elements are found to be homogeneous (with abundance dispersions at the level of $\sim$ 0.05 - 0.07 dex) in these cluster red giants, which span much of the red-giant branch (T$_{\rm eff}$ $\sim$ 3500K - 4600K), and include two red-clump giants. From the infrared spectra, this cluster is confirmed to be among the most metal-rich clusters in the Galaxy ($<$[Fe/H]$>$ = 0.34 $\pm$ 0.06), and is found to have a roughly solar value of [O/Fe] and slightly enhanced [Na/Fe]. Non-LTE calculations for the studied Na I lines in the APOGEE spectral region ($λ$16373.86Å and $λ$16388.85Å) indicate only small departures from LTE ($\leq$ 0.04 dex) for the parameter range and metallicity of the studied stars. The previously reported double population of cluster members with different Na abundances is not found among the studied sample.
△ Less
Submitted 7 November, 2014;
originally announced November 2014.
-
Cosmological implications of baryon acoustic oscillation (BAO) measurements
Authors:
Éric Aubourg,
Stephen Bailey,
Julian E. Bautista,
Florian Beutler,
Vaishali Bhardwaj,
Dmitry Bizyaev,
Michael Blanton,
Michael Blomqvist,
Adam S. Bolton,
Jo Bovy,
Howard Brewington,
J. Brinkmann,
Joel R. Brownstein,
Angela Burden,
Nicolás G. Busca,
William Carithers,
Chia-Hsun Chuang,
Johan Comparat,
Antonio J. Cuesta,
Kyle S. Dawson,
Timothée Delubac,
Daniel J. Eisenstein,
Andreu Font-Ribera,
Jian Ge,
J. -M. Le Goff
, et al. (68 additional authors not shown)
Abstract:
We derive constraints on cosmological parameters and tests of dark energy models from the combination of baryon acoustic oscillation (BAO) measurements with cosmic microwave background (CMB) and Type Ia supernova (SN) data. We take advantage of high-precision BAO measurements from galaxy clustering and the Ly-alpha forest (LyaF) in the BOSS survey of SDSS-III. BAO data alone yield a high confidenc…
▽ More
We derive constraints on cosmological parameters and tests of dark energy models from the combination of baryon acoustic oscillation (BAO) measurements with cosmic microwave background (CMB) and Type Ia supernova (SN) data. We take advantage of high-precision BAO measurements from galaxy clustering and the Ly-alpha forest (LyaF) in the BOSS survey of SDSS-III. BAO data alone yield a high confidence detection of dark energy, and in combination with the CMB angular acoustic scale they further imply a nearly flat universe. Combining BAO and SN data into an "inverse distance ladder" yields a 1.7% measurement of $H_0=67.3 \pm1.1$ km/s/Mpc. This measurement assumes standard pre-recombination physics but is insensitive to assumptions about dark energy or space curvature, so agreement with CMB-based estimates that assume a flat LCDM cosmology is an important corroboration of this minimal cosmological model. For open LCDM, our BAO+SN+CMB combination yields $Ω_m=0.301 \pm 0.008$ and curvature $Ω_k=-0.003 \pm 0.003$. When we allow more general forms of evolving dark energy, the BAO+SN+CMB parameter constraints remain consistent with flat LCDM. While the overall $χ^2$ of model fits is satisfactory, the LyaF BAO measurements are in moderate (2-2.5 sigma) tension with model predictions. Models with early dark energy that tracks the dominant energy component at high redshifts remain consistent with our constraints. Expansion history alone yields an upper limit of 0.56 eV on the summed mass of neutrino species, improving to 0.26 eV if we include Planck CMB lensing. Standard dark energy models constrained by our data predict a level of matter clustering that is high compared to most, but not all, observational estimates. (Abridged)
△ Less
Submitted 9 October, 2015; v1 submitted 4 November, 2014;
originally announced November 2014.
-
CHARIS Science: Performance Simulations for the Subaru Telescope's Third-Generation of Exoplanet Imaging Instrumentation
Authors:
Timothy D. Brandt,
Michael W. McElwain,
Markus Janson,
Gillian R. Knapp,
Kyle Mede,
Mary Anne Limbach,
Tyler Groff,
Adam Burrows,
James E. Gunn,
Olivier Guyon,
Jun Hashimoto,
Masahiko Hayashi,
Nemanja Jovanovic,
N. Jeremy Kasdin,
Masayuki Kuzuhara,
Robert H. Lupton,
Frantz Martinache,
Satoko Sorahana,
David S. Spiegel,
Naruhisa Takato,
Motohide Tamura,
Edwin L. Turner,
Robert Vanderbei,
John Wisniewski
Abstract:
We describe the expected scientific capabilities of CHARIS, a high-contrast integral-field spectrograph (IFS) currently under construction for the Subaru telescope. CHARIS is part of a new generation of instruments, enabled by extreme adaptive optics (AO) systems (including SCExAO at Subaru), that promise greatly improved contrasts at small angular separation thanks to their ability to use spectra…
▽ More
We describe the expected scientific capabilities of CHARIS, a high-contrast integral-field spectrograph (IFS) currently under construction for the Subaru telescope. CHARIS is part of a new generation of instruments, enabled by extreme adaptive optics (AO) systems (including SCExAO at Subaru), that promise greatly improved contrasts at small angular separation thanks to their ability to use spectral information to distinguish planets from quasistatic speckles in the stellar point-spread function (PSF). CHARIS is similar in concept to GPI and SPHERE, on Gemini South and the Very Large Telescope, respectively, but will be unique in its ability to simultaneously cover the entire near-infrared $J$, $H$, and $K$ bands with a low-resolution mode. This extraordinarily broad wavelength coverage will enable spectral differential imaging down to angular separations of a few $λ/D$, corresponding to $\sim$$0.\!\!''1$. SCExAO will also offer contrast approaching $10^{-5}$ at similar separations, $\sim$$0.\!\!''1$--$0.\!\!''2$. The discovery yield of a CHARIS survey will depend on the exoplanet distribution function at around 10 AU. If the distribution of planets discovered by radial velocity surveys extends unchanged to $\sim$20 AU, observations of $\sim$200 mostly young, nearby stars targeted by existing high-contrast instruments might find $\sim$1--3 planets. Carefully optimizing the target sample could improve this yield by a factor of a few, while an upturn in frequency at a few AU could also increase the number of detections. CHARIS, with a higher spectral resolution mode of $R \sim 75$, will also be among the best instruments to characterize planets and brown dwarfs like HR 8799 cde and $κ$ And b.
△ Less
Submitted 25 September, 2014;
originally announced September 2014.
-
Optical Design of the SuMIRe PFS Spectrograph
Authors:
Sandrine Pascal,
Sebastien Vives,
Robert Barkhouser,
James Gunn
Abstract:
The SuMIRe Prime Focus Spectrograph (PFS), developed for the 8-m class SUBARU telescope, will consist of four identical spectrographs, each receiving 600 fibers from a 2394 fiber robotic positioner at the telescope prime focus. Each spectrograph includes three spectral channels to cover the wavelength range 0.38-1.26 um with a resolving power ranging between 2000 and 4000. A medium resolution mode…
▽ More
The SuMIRe Prime Focus Spectrograph (PFS), developed for the 8-m class SUBARU telescope, will consist of four identical spectrographs, each receiving 600 fibers from a 2394 fiber robotic positioner at the telescope prime focus. Each spectrograph includes three spectral channels to cover the wavelength range 0.38-1.26 um with a resolving power ranging between 2000 and 4000. A medium resolution mode is also implemented to reach a resolving power of 5000 at 0.8 um. Each spectrograph is made of 4 optical units: the entrance unit which produces three corrected collimated beams and three camera units (one per spectral channel). The beam is split by using two large dichroics; and in each arm, the light is dispersed by large VPH gratings. The proposed optical design was optimized to achieve the requested image quality while simplifying the manufacturing of the whole optical system. The camera design consists in an innovative Schmidt camera observing a large field-of-view (10 degrees) with a very fast beam. To achieve such a performance, the classical spherical mirror is replaced by a catadioptric mirror (i.e meniscus lens with a reflective surface on the rear side of the glass, like a Mangin mirror). This article focuses on the optical architecture of the PFS spectrograph and the perfornance achieved. We will first described the global optical design of the spectrograph. Then, we will focus on the Mangin-Schmidt camera design. The analysis of the optical performance and the results obtained are presented in the last section.
△ Less
Submitted 18 August, 2014;
originally announced August 2014.
-
CCD Readout Electronics for the Subaru Prime Focus Spectrograph
Authors:
Stephen C. Hope,
James E. Gunn,
Craig P. Loomis,
Roger E. Fitzgerald,
Grant O. Peacock
Abstract:
We present details of the design for the CCD readout electronics for the Subaru Telescope Prime Focus Spectrograph (PFS). The spectrograph is comprised of four identical spectrograph modules, each collecting roughly 600 spectra. The spectrograph modules provide simultaneous wavelength coverage over the entire band from 380 nm to 1260 nm through the use of three separate optical channels: blue, red…
▽ More
We present details of the design for the CCD readout electronics for the Subaru Telescope Prime Focus Spectrograph (PFS). The spectrograph is comprised of four identical spectrograph modules, each collecting roughly 600 spectra. The spectrograph modules provide simultaneous wavelength coverage over the entire band from 380 nm to 1260 nm through the use of three separate optical channels: blue, red, and near infrared (NIR). A camera in each channel images the multi-object spectra onto a 4k x 4k, 15 um pixel, detector format. The two visible cameras use a pair of Hamamatsu 2k x 4k CCDs with readout provided by custom electronics, while the NIR camera uses a single Teledyne HgCdTe 4k x 4k detector and ASIC Sidecar to read the device.
The CCD readout system is a custom design comprised of three electrical subsystems: the Back End Electronics (BEE), the Front End Electronics (FEE), and a Pre-amplifier. The BEE is an off-the-shelf PC104 computer, with an auxiliary Xilinx FPGA module. The computer serves as the main interface to the Subaru messaging hub and controls other peripheral devices associated with the camera, while the FPGA is used to generate the necessary clocks and transfer image data from the CCDs. The FEE board sets clock biases, substrate bias, and CDS offsets. It also monitors bias voltages, offset voltages, power rail voltage, substrate voltage and CCD temperature. The board translates LVDS clock signals to biased clocks and returns digitized analog data via LVDS. Monitoring and control messages are sent from the BEE to the FEE using a standard serial interface. The Pre-amplifier board resides behind the detectors and acts as an interface to the two Hamamatsu CCDs. The Pre-amplifier passes clocks and biases to the CCDs, and analog CCD data is buffered and amplified prior to being returned to the FEE.
△ Less
Submitted 14 August, 2014;
originally announced August 2014.
-
The near infrared camera for the Subaru Prime Focus Spectrograph
Authors:
Stephen A. Smee,
James E. Gunn,
Mirek Golebiowski,
Robert Barkhouser,
Sebastien Vives,
Sandrine Pascal,
Michael Carr,
Stephen C. Hope,
Craig Loomis,
Murdock Hart,
Hajime Sugai,
Naoyuki Tamura,
Atsushi Shimono
Abstract:
We present the detailed design of the near infrared camera for the SuMIRe (Subaru Measurement of Images and Redshifts) Prime Focus Spectrograph (PFS) being developed for the Subaru Telescope. The PFS spectrograph is designed to collect spectra from 2394 objects simultaneously, covering wavelengths that extend from 380 nm - 1.26 um. The spectrograph is comprised of four identical spectrograph modul…
▽ More
We present the detailed design of the near infrared camera for the SuMIRe (Subaru Measurement of Images and Redshifts) Prime Focus Spectrograph (PFS) being developed for the Subaru Telescope. The PFS spectrograph is designed to collect spectra from 2394 objects simultaneously, covering wavelengths that extend from 380 nm - 1.26 um. The spectrograph is comprised of four identical spectrograph modules, with each module collecting roughly 600 spectra from a robotic fiber positioner at the telescope prime focus. Each spectrograph module will have two visible channels covering wavelength ranges 380 nm - 640 nm and 640 nm - 955 nm, and one near infrared (NIR) channel with a wavelength range 955 nm - 1.26 um. Dispersed light in each channel is imaged by a 300 mm focal length, f/1.07, vacuum Schmidt camera onto a 4k x 4k, 15 um pixel, detector format. For the NIR channel a HgCdTe substrate-removed Teledyne 1.7 um cutoff device is used. In the visible channels, CCDs from Hamamatsu are used. These cameras are large, having a clear aperture of 300 mm at the entrance window, and a mass of ~ 250 kg.
Like the two visible channel cameras, the NIR camera contains just four optical elements: a two-element refractive corrector, a Mangin mirror, and a field flattening lens. This simple design produces very good imaging performance considering the wide field and wavelength range, and it does so in large part due to the use of a Mangin mirror (a lens with a reflecting rear surface) for the Schmidt primary. In the case of the NIR camera, the rear reflecting surface is a dichroic, which reflects in-band wavelengths and transmits wavelengths beyond 1.26 um. This, combined with a thermal rejection filter coating on the rear surface of the second corrector element, greatly reduces the out-of-band thermal radiation that reaches the detector.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Studying focal ratio degradation of optical fibers for Subaru Prime Focus Spectrograph
Authors:
Jesulino Bispo dos Santos,
Antonio Cesar de Oliveira,
James Gunn,
Ligia Souza de Oliveira,
Marcio Vital de Arruda,
Bruno Castilho,
Clemens Darvin Gneiding,
Flavio Felipe Ribeiro,
Graham Murray,
Daniel J. Reiley,
Laerte Sodré Junior,
Claudia Mendes de Oliveira
Abstract:
Focal Ration Degradation (FRD) is a change in light angular distribution caused by fiber optics. FRD is important to fiber-fed, spectroscopic astronomical systems because it can cause loss of signal, degradation in spectral resolution, or increased complexity in spectrograph design. Laboratório Nacional de Astrofísica (LNA) has developed a system that can accurately and precisely measures FRD, usi…
▽ More
Focal Ration Degradation (FRD) is a change in light angular distribution caused by fiber optics. FRD is important to fiber-fed, spectroscopic astronomical systems because it can cause loss of signal, degradation in spectral resolution, or increased complexity in spectrograph design. Laboratório Nacional de Astrofísica (LNA) has developed a system that can accurately and precisely measures FRD, using an absolute method that can also measure fiber throughput. This paper describes the metrology system and shows measurements of Polymicro fiber FBP129168190, FBP127165190 and Fujikura fiber 128170190. Although the FRD of the two fibers are low and similar to one another, it is very important to know the exact characteristics of these fibers since both will be used in the construction of FOCCoS (Fiber Optical Cable and Connectors System) for PFS (Prime Focus Spectrograph) to be installed at the Subaru telescope.
△ Less
Submitted 13 August, 2014;
originally announced August 2014.
-
Metrology Camera System of Prime Focus Spectrograph for Subaru Telescope
Authors:
Shiang-Yu Wang,
Richard C. -Y. Chou,
Yin-Chang Chang,
Pin-Jie Huang,
Yen-Sang Hu,
Hsin-Yo Chen,
Naoyuki Tamura,
Naruhisa Takato,
Hung-Hsu Ling,
James E. Gunn,
Jennifer Karr,
Chi-Hung Yan,
Peter Mao,
Youichi Ohyama,
Hiroshi Karoji,
Hajime Sugai,
Atsushi Shimono
Abstract:
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. The metrology camera system of PFS serves as the optical encoder of the COBRA fiber motors for the configuring of fibers. The 380mm diameter aperture metrology camera will locate at the Cassegrain focus of Subaru telescope to cover the whole focal pl…
▽ More
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. The metrology camera system of PFS serves as the optical encoder of the COBRA fiber motors for the configuring of fibers. The 380mm diameter aperture metrology camera will locate at the Cassegrain focus of Subaru telescope to cover the whole focal plane with one 50M pixel Canon CMOS sensor. The metrology camera is designed to provide the fiber position information within 5μm error over the 45cm focal plane. The positions of all fibers can be obtained within 1s after the exposure is finished. This enables the overall fiber configuration to be less than 2 minutes.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Design and performance of a F/#-conversion microlens for Prime Focus Spectrograph at Subaru Telescope
Authors:
Naruhisa Takato,
Yoko Tanaka,
James E. Gunn,
Naoyuki Tamura,
Atsushi Shimono,
Hajime Sugai,
Hiroshi Karoji,
Akitoshi Ueda,
Kouichi Waseda,
Masahiko Kimura,
Youichi Ohyama
Abstract:
The PFS is a multi-object spectrograph fed by 2394 fibers at the prime focus of Subaru telescope. Since the F/# at the prime focus is too fast for the spectrograph, we designed a small concave-plano negative lens to be attached to the tip of each fiber that converts the telescope beam (F/2.2) to F/2.8. We optimized the lens to maximize the number of rays that can be confined inside F/2.8 while mai…
▽ More
The PFS is a multi-object spectrograph fed by 2394 fibers at the prime focus of Subaru telescope. Since the F/# at the prime focus is too fast for the spectrograph, we designed a small concave-plano negative lens to be attached to the tip of each fiber that converts the telescope beam (F/2.2) to F/2.8. We optimized the lens to maximize the number of rays that can be confined inside F/2.8 while maintaining a 1.28 magnification. The microlenses are manufactured by glass molding, and an ultra-broadband AR coating (<1.5% for lambda=0.38-1.26 um) will be applied to the front surface.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Multi-fibers connectors systems for FOCCoS-PFS-Subaru
Authors:
Antonio Cesar de Oliveira,
Ligia Souza de Oliveira,
Lucas Souza Marrara,
Leandro Henrique dos Santos,
Marcio Vital de Arruda,
Jesulino Bispo dos Santos,
Décio Ferreira,
Josimar Aparecido Rosa,
Rodrigo de Paiva Vilaca,
Laerte Sodre Junior Claudia Mendes de Oliveira,
James E. Gunn
Abstract:
The Fiber Optical Cable and Connector System (FOCCoS), provides optical connection between 2400 positioners and a set of spectrographs through optical fibers cables as part of PFS instrument for Subaru telescope. The optical fiber cable will be segmented in 3 parts along the route, cable A, cable B and cable C, connected by a set of multi-fiber connectors. The company USCONEC produces the multi-fi…
▽ More
The Fiber Optical Cable and Connector System (FOCCoS), provides optical connection between 2400 positioners and a set of spectrographs through optical fibers cables as part of PFS instrument for Subaru telescope. The optical fiber cable will be segmented in 3 parts along the route, cable A, cable B and cable C, connected by a set of multi-fiber connectors. The company USCONEC produces the multi-fiber connector under study. The USCONEC 32F model can connect 32 optical fibers in a 4 x 8 matrix arrangement. The ferrules are made of a durable composite, Polyphenylene Sulfide (PPS) based thermoplastic. The connections are held in place by a push-on/pull-off latch, and the connector can also be distinguished by a pair of metal guide pins that protrude from the front of the connector. Two fibers per connector will be used for monitoring the connection procedure. It was found to be easy to polish and it is small enough to be mounted in groups. Highly multiplexed instruments like PFS require a fiber connector system that can deliver excellent optical performance and reliability. PFS requires two different types of structures to organize the connectors. The Tower Connector system, with 80 multi-fiber connectors, will be a group of connectors for connecting cable B (Telescope Structure) with cable C (Positioners Plate). The Gang Connector system is a group of 8 gang connectors, each one with 12 multi-fibers connectors, for connecting cable B (Telescope Structure) with cable A (Spectrograph). The bench tests with these connector systems and the chosen fibers should measure the throughput of light and the stability after many connections and disconnections. In this paper we describe tests and procedures to evaluate the throughput and FRD increment. The lifetime of the ferrules is also in evaluation.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Slit device for FOCCoS, PFS, Subaru
Authors:
Antonio Cesar de Oliveira,
James E. Gunn,
Ligia Souza de Oliveira,
Marcio Vital de Arruda,
Lucas Souza Marrara,
Leandro Henrique dos Santos,
Décio Ferreira,
Jesulino Bispo dos Santos,
Josimar Aparecido Rosa,
Flavio Felipe Ribeiro,
Rodrigo de Paiva Vilaça,
Orlando Verducci Junior,
Laerte Sodré Junior,
Claudia Mendes de Oliveira
Abstract:
The Fiber Optical Cable and Connector System, FOCCoS, subsystem of the Prime Focus Spectrograph, PFS, for Subaru telescope, is responsible to feed four spectrographs with a set of optical fibers cables. The light injection for each spectrograph is assured by a convex curved slit with a linear array of 616 optical fibers. In this paper we present a design of a slit that ensures the right direction…
▽ More
The Fiber Optical Cable and Connector System, FOCCoS, subsystem of the Prime Focus Spectrograph, PFS, for Subaru telescope, is responsible to feed four spectrographs with a set of optical fibers cables. The light injection for each spectrograph is assured by a convex curved slit with a linear array of 616 optical fibers. In this paper we present a design of a slit that ensures the right direction of the fibers by using masks of micro holes. This kind of mask is made by a technique called electroforming, which is able to produce a nickel plate with holes in a linear sequence. The precision error is around 1micron in the diameter and 1 micron in the positions of the holes. This nickel plate may be produced with a thickness between 50 and 200 microns, so it may be very flexible. This flexibility allows the mask to be bent into the shape necessary for a curved slit. The concept requires two masks, which we call Front Mask, and Rear Mask, separated by a gap that defines the thickness of the slit. The pitch and the diameter of the holes define the linear geometry of the slit; the curvature of each mask defines the angular geometry of the slit. Obviously, this assembly must be mounted inside a structure rigid and strong enough to be supported inside the spectrograph. This structure must have a CTE optimized to avoid displacement of the fibers or increased FRD of the fibers when the device is submitted to temperatures around 3 degrees Celsius, the temperature of operation of the spectrograph. We have produced two models. Both are mounted inside a very compact Invar case, and both have their front surfaces covered by a dark composite, to reduce stray light. Furthermore, we have conducted experiments with two different internal structures to minimize effects caused by temperature gradients.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Fiber Optical Cable and Connector System (FOCCoS) for PFS/Subaru
Authors:
Antonio Cesar de Oliveira,
Lígia Souza de Oliveira,
Márcio V. de Arruda,
Lucas Souza Marrara,
Leandro H. dos Santos,
Décio Ferreira,
Jesulino B. dos Santos,
Josimar A. Rosa,
Orlando V. Junior,
Jeferson M. Pereira,
Bruno Castilho,
Clemens Gneiding,
Laerte S. Junior,
Claudia M. de Oliveira,
James E. Gunn,
Akitoshi Ueda,
Naruhisa Takato,
Atsushi Shimono,
Hajime Sugai,
Hiroshi Karoji,
Masahiko Kimura,
Naoyuki Tamura,
Shiang-Yu Wang,
Graham Murray,
David Le Mignant
, et al. (7 additional authors not shown)
Abstract:
FOCCoS, Fiber Optical Cable and Connector System, has the main function of capturing the direct light from the focal plane of Subaru Telescope using optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi…
▽ More
FOCCoS, Fiber Optical Cable and Connector System, has the main function of capturing the direct light from the focal plane of Subaru Telescope using optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi-fibers connectors assure precise connection among all optical fibers of the segments, providing flexibility for instrument changes. To assure strong and accurate connection, these sets are arranged inside two types of assemblies: the Tower Connector, for connection between Cable C and Cable B; and the Gang Connector, for connection between Cable B and Cable A. Throughput tests were made to evaluate the efficiency of the connections. A lifetime test connection is in progress. Cable C is installed inside the PFI, Prime Focus Instrument, where each fiber tip with a microlens is bonded to the end of the shaft of a 2-stage piezo-electric rotatory motor positioner; this assembly allows each fiber to be placed anywhere within its patrol region, which is 9.5mm diameter.. Each positioner uses a fiber arm to support the ferrule, the microlens, and the optical fiber. 2400 of these assemblies are arranged on a motor bench plate in a hexagonal-closed-packed disposition.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Volume phase holographic gratings for the Subaru Prime Focus Spectrograph: performance measurements of the prototype grating set
Authors:
Robert Barkhouser,
James Arns,
James E. Gunn
Abstract:
The Prime Focus Spectrograph (PFS) is a major instrument under development for the 8.2 m Subaru telescope. Four identical spectrograph modules are located in a room above one Nasmyth focus. A 55~m fiber optic cable feeds light to the spectrographs from a robotic positioner at the prime focus, behind the wide-field corrector developed for Hyper Suprime-Cam. The positioner contains 2400 fibers and c…
▽ More
The Prime Focus Spectrograph (PFS) is a major instrument under development for the 8.2 m Subaru telescope. Four identical spectrograph modules are located in a room above one Nasmyth focus. A 55~m fiber optic cable feeds light to the spectrographs from a robotic positioner at the prime focus, behind the wide-field corrector developed for Hyper Suprime-Cam. The positioner contains 2400 fibers and covers a 1.3~degree hexagonal field of view.
The spectrograph optical design consists of a Schmidt collimator, two dichroic beamsplitters to split the light into three channels, and for each channel a volume phase holographic (VPH) grating and a dual-corrector, modified Schmidt reimaging camera. This design provides a 275~mm collimated beam diameter, wide simultaneous wavelength coverage from 380~nm to 1.26~\textmu m, and good imaging performance at the fast f/1.05 focal ratio required from the cameras to avoid oversampling the fibers. The three channels are designated as the blue, red, and near-infrared (NIR), and cover the bandpasses 380--650~nm (blue), 630--970~nm (red), and 0.94--1.26~\textmu m (NIR). A mosaic of two Hamamatsu 2k$\times$4k, 15~\textmu m pixel CCDs records the spectra in the blue and red channels, while the NIR channel employs a 4k$\times$4k, substrate-removed HAWAII-4RG array from Teledyne, with 15~\textmu m pixels and a 1.7~\textmu m wavelength cutoff.
VPH gratings were an obvious choice for PFS and a set of three prototype VPH gratings (one each of the blue, red, and NIR designs) was ordered and has been recently delivered. In this paper we present the design and specifications for the PFS gratings, the plan and setups used for testing both the prototype and final gratings, and results from recent optical testing of the prototype grating set.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Current status of the Spectrograph System for the SuMIRe/PFS
Authors:
S. Vives,
D. Le Mignant,
J. E. Gunn,
S. Smee,
L. Souza de Oliveira,
N. Tamura,
H. Sugai,
R. Barkhouser,
A. Bozier,
M. A. Carr,
A. Cesar de Oliveira,
D. Ferrand,
M. Golebiowski,
M. Hart,
S. Hope,
M. Jaquet,
F. Madec,
S. Pascal,
T. Pegot-Ogier,
M. Vittal de Arruda
Abstract:
The Prime Focus Spectrograph (PFS) is a new facility instrument for Subaru Telescope which will be installed in around 2017. It is a multi-object spectrograph fed by about 2400 fibers placed at the prime focus covering a hexagonal field-of-view with 1.35 deg diagonals and capable of simultaneously obtaining data of spectra with wavelengths ranging from 0.38 um to 1.26 um. The spectrograph system i…
▽ More
The Prime Focus Spectrograph (PFS) is a new facility instrument for Subaru Telescope which will be installed in around 2017. It is a multi-object spectrograph fed by about 2400 fibers placed at the prime focus covering a hexagonal field-of-view with 1.35 deg diagonals and capable of simultaneously obtaining data of spectra with wavelengths ranging from 0.38 um to 1.26 um. The spectrograph system is composed of four identical modules each receiving the light from 600 fibers. Each module incorporates three channels covering the wavelength ranges 0.38-0.65 mu ("Blue"), 0.63-0.97 mu ("Red"), and 0.94-1.26 mu ("NIR") respectively; with resolving power which progresses fairly smoothly from about 2000 in the blue to about 4000 in the infrared. An additional spectral mode allows reaching a spectral resolution of 5000 at 0.8mu (red). The proposed optical design is based on a Schmidt collimator facing three Schmidt cameras (one per spectral channel). This architecture is very robust, well known and documented. It allows for high image quality with only few simple elements (high throughput) at the expense of the central obscuration, which leads to larger optics. Each module has to be modular in its design to allow for integration and tests and for its safe transport up to the telescope: this is the main driver for the mechanical design. In particular, each module will be firstly fully integrated and validated at LAM (France) before it is shipped to Hawaii. All sub-assemblies will be indexed on the bench to allow for their accurate repositioning. This paper will give an overview of the spectrograph system which has successfully passed the Critical Design Review (CDR) in 2014 March and which is now in the construction phase.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Progress with the Prime Focus Spectrograph for the Subaru Telescope: a massively multiplexed optical and near-infrared fiber spectrograph
Authors:
Hajime Sugai,
Naoyuki Tamura,
Hiroshi Karoji,
Atsushi Shimono,
Naruhisa Takato,
Masahiko Kimura,
Youichi Ohyama,
Akitoshi Ueda,
Hrand Aghazarian,
Marcio Vital de Arruda,
Robert H. Barkhouser,
Charles L. Bennett,
Steve Bickerton,
Alexandre Bozier,
David F. Braun,
Khanh Bui,
Christopher M. Capocasale,
Michael A. Carr,
Bruno Castilho,
Yin-Chang Chang,
Hsin-Yo Chen,
Richard C. Y. Chou,
Olivia R. Dawson,
Richard G. Dekany,
Eric M. Ek
, et al. (59 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology,…
▽ More
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology, and galaxy/AGN evolution. A medium resolution mode with resolving power of 5000 for 0.71 um to 0.89 um also will be available by simply exchanging dispersers. PFS takes the role for the spectroscopic part of the Subaru Measurement of Images and Redshifts project, while Hyper Suprime-Cam works on the imaging part. To transform the telescope plus WFC focal ratio, a 3-mm thick broad-band coated glass-molded microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of cable system, while one with a better FRD performance is selected for the fiber-positioner and fiber-slit components, given the more frequent fiber movements and tightly curved structure. Each Fiber positioner consists of two stages of piezo-electric rotary motors. Its engineering model has been produced and tested. Fiber positioning will be performed iteratively by taking an image of artificially back-illuminated fibers with the Metrology camera located in the Cassegrain container. The camera is carefully designed so that fiber position measurements are unaffected by small amounts of high special-frequency inaccuracies in WFC lens surface shapes. Target light carried through the fiber system reaches one of four identical fast-Schmidt spectrograph modules, each with three arms. Prototype VPH gratings have been optically tested. CCD production is complete, with standard fully-depleted CCDs for red arms and more-challenging thinner fully-depleted CCDs with blue-optimized coating for blue arms.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Focal Plane Alignment and Detector Characterization for the Subaru Prime Focus Spectrograph
Authors:
Murdock Hart,
Robert H. Barkhouser,
Michael Carr,
Mirek Golebiowski,
James E. Gunn,
Stephen C. Hope,
Stephen A. Smee
Abstract:
We describe the infrastructure being developed to align and characterize the detectors for the Subaru Measurement of Images and Redshifts (SuMIRe) Prime Focus Spectrograph (PFS). PFS will employ four three-channel spectrographs with an operating wavelength range of 3800 $Å$ to 12600 $Å$. Each spectrograph will be comprised of two visible channels and one near infrared (NIR) channel, where each cha…
▽ More
We describe the infrastructure being developed to align and characterize the detectors for the Subaru Measurement of Images and Redshifts (SuMIRe) Prime Focus Spectrograph (PFS). PFS will employ four three-channel spectrographs with an operating wavelength range of 3800 $Å$ to 12600 $Å$. Each spectrograph will be comprised of two visible channels and one near infrared (NIR) channel, where each channel will use a separate Schmidt camera to image the captured spectra onto their respective detectors. In the visible channels, Hamamatsu 2k x 4k CCDs will be mounted in pairs to create a single 4k x 4k detector, while the NIR channel will use a single Teledyne 4k x 4k H4RG HgCdTe device.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
The clustering of galaxies in the SDSS-III Baryon Oscillation Spectroscopic Survey: Baryon Acoustic Oscillations in the Data Release 10 and 11 galaxy samples
Authors:
Lauren Anderson,
Eric Aubourg,
Stephen Bailey,
Florian Beutler,
Vaishali Bhardwaj,
Michael Blanton,
Adam S. Bolton,
J. Brinkmann,
Joel R. Brownstein,
Angela Burden,
Chia-Hsun Chuang,
Antonio J. Cuesta,
Kyle S. Dawson,
Daniel J. Eisenstein,
Stephanie Escoffier,
James E. Gunn,
Hong Guo,
Shirley Ho,
Klaus Honscheid,
Cullan Howlett,
David Kirkby,
Robert H. Lupton,
Marc Manera,
Claudia Maraston,
Cameron K. McBride
, et al. (40 additional authors not shown)
Abstract:
We present a one per cent measurement of the cosmic distance scale from the detections of the baryon acoustic oscillations in the clustering of galaxies from the Baryon Oscillation Spectroscopic Survey (BOSS), which is part of the Sloan Digital Sky Survey III (SDSS-III). Our results come from the Data Release 11 (DR11) sample, containing nearly one million galaxies and covering approximately…
▽ More
We present a one per cent measurement of the cosmic distance scale from the detections of the baryon acoustic oscillations in the clustering of galaxies from the Baryon Oscillation Spectroscopic Survey (BOSS), which is part of the Sloan Digital Sky Survey III (SDSS-III). Our results come from the Data Release 11 (DR11) sample, containing nearly one million galaxies and covering approximately $8\,500$ square degrees and the redshift range $0.2<z<0.7$. We also compare these results with those from the publicly released DR9 and DR10 samples. Assuming a concordance $Λ$CDM cosmological model, the DR11 sample covers a volume of 13\,Gpc${}^3$ and is the largest region of the Universe ever surveyed at this density. We measure the correlation function and power spectrum, including density-field reconstruction of the baryon acoustic oscillation (BAO) feature. The acoustic features are detected at a significance of over $7\,σ$ in both the correlation function and power spectrum. Fitting for the position of the acoustic features measures the distance relative to the sound horizon at the drag epoch, $r_d$, which has a value of $r_{d,{\rm fid}}=149.28\,$Mpc in our fiducial cosmology. We find $D_V=(1264\pm25\,{\rm Mpc})(r_d/r_{d,{\rm fid}})$ at $z=0.32$ and $D_V=(2056\pm20\,{\rm Mpc})(r_d/r_{d,{\rm fid}})$ at $z=0.57$. At 1.0 per cent, this latter measure is the most precise distance constraint ever obtained from a galaxy survey. Separating the clustering along and transverse to the line-of-sight yields measurements at $z=0.57$ of $D_A=(1421\pm20\,{\rm Mpc})(r_d/r_{d,{\rm fid}})$ and $H=(96.8\pm3.4\,{\rm km/s/Mpc})(r_{d,{\rm fid}}/r_d)$. Our measurements of the distance scale are in good agreement with previous BAO measurements and with the predictions from cosmic microwave background data for a spatially flat cold dark matter model with a cosmological constant.
△ Less
Submitted 3 June, 2014; v1 submitted 17 December, 2013;
originally announced December 2013.
-
The Stellar Halos of Massive Elliptical Galaxies II: Detailed Abundance Ratios at Large Radius
Authors:
Jenny E Greene,
Jeremy D Murphy,
Genevieve J Graves,
James E Gunn,
Sudhir Raskutti,
Julia M Comerford,
Karl Gebhardt
Abstract:
We study the radial dependence in stellar populations of 33 nearby early-type galaxies with central stellar velocity dispersions sigma* > 150 km/s. We measure stellar population properties in composite spectra, and use ratios of these composites to highlight the largest spectral changes as a function of radius. Based on stellar population modeling, the typical star at 2 R_e is old (~10 Gyr), relat…
▽ More
We study the radial dependence in stellar populations of 33 nearby early-type galaxies with central stellar velocity dispersions sigma* > 150 km/s. We measure stellar population properties in composite spectra, and use ratios of these composites to highlight the largest spectral changes as a function of radius. Based on stellar population modeling, the typical star at 2 R_e is old (~10 Gyr), relatively metal poor ([Fe/H] -0.5), and alpha-enhanced ([Mg/Fe]~0.3). The stars were made rapidly at z~1.5-2 in shallow potential wells. Declining radial gradients in [C/Fe], which follow [Fe/H], also arise from rapid star formation timescales due to declining carbon yields from low-metallicity massive stars. In contrast, [N/Fe] remains high at large radius. Stars at large radius have different abundance ratio patterns from stars in the center of any present-day galaxy, but are similar to Milky Way thick disk stars. Our observations are thus consistent with a picture in which the stellar outskirts are built up through minor mergers with disky galaxies whose star formation is truncated early (z~1.5-2).
△ Less
Submitted 12 August, 2013;
originally announced August 2013.