-
Current laboratory performance of starlight suppression systems, and potential pathways to desired Habitable Worlds Observatory exoplanet science capabilities
Authors:
Bertrand Mennesson,
Ruslan Belikov,
Emiel Por,
Eugene Serabyn,
Garreth Ruane,
A. J. Eldorado Riggs,
Dan Sirbu,
Laurent Pueyo,
Remi Soummer,
Jeremy Kasdin,
Stuart Shaklan,
Byoung-Joon Seo,
Christopher Stark,
Eric Cady,
Pin Chen,
Brendan Crill,
Kevin Fogarty,
Alexandra Greenbaum,
Olivier Guyon,
Roser Juanola-Parramon,
Brian Kern,
John Krist,
Bruce Macintosh,
David Marx,
Dimitri Mawet
, et al. (12 additional authors not shown)
Abstract:
We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis t…
▽ More
We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis telescopes, either monolithic or segmented. For a given angular separation and spectral bandwidth, the performance of each starlight suppression system is characterized by the values of raw contrast (before image processing), off-axis (exoplanet) core throughput, and post-calibration contrast (the final 1 sigma detection limit of off-axis point sources, after image processing). To place the current laboratory results in the perspective of the future Habitable Worlds Observatory (HWO) mission, we simulate visible observations of a fiducial Earth/Sun twin system at 12 pc, assuming a 6m (inscribed diameter) collecting aperture and a realistic end-to-end optical throughput. The exposure times required for broadband exoearth detection (20% bandwidth around a wavelength of 0.55 microns) and visible spectroscopic observations (R=70) are then computed assuming various levels of starlight suppression performance, including the values currently demonstrated in the laboratory. Using spectroscopic exposure time as a simple metric, our results point to key starlight suppression system design performance improvements and trades to be conducted in support of HWO exoplanet science capabilities. These trades may be explored via numerical studies, lab experiments, as well as high contrast space-based observations and demonstrations.
△ Less
Submitted 27 April, 2024;
originally announced April 2024.
-
Mitigating Worst-Case Exozodiacal Dust Structure in High-contrast Images of Earth-like Exoplanets
Authors:
Miles H. Currie,
Christopher C. Stark,
Jens Kammerer,
Roser Juanola-Parramon,
Victoria S. Meadows
Abstract:
Detecting Earth-like exoplanets in direct images of nearby Sun-like systems brings a unique set of challenges that must be addressed in the early phases of designing a space-based direct imaging mission. In particular, these systems may contain exozodiacal dust, which is expected to be the dominant source of astrophysical noise. Previous work has shown that it may be feasible to subtract smooth, s…
▽ More
Detecting Earth-like exoplanets in direct images of nearby Sun-like systems brings a unique set of challenges that must be addressed in the early phases of designing a space-based direct imaging mission. In particular, these systems may contain exozodiacal dust, which is expected to be the dominant source of astrophysical noise. Previous work has shown that it may be feasible to subtract smooth, symmetric dust from observations; however, we do not expect exozodiacal dust to be perfectly smooth. Exozodiacal dust can be trapped into mean motion resonances with planetary bodies, producing large-scale structures that orbit in lock with the planet. This dust can obscure the planet, complicate noise estimation, or be mistaken for a planetary body. Our ability to subtract these structures from high-contrast images of Earth-like exoplanets is not well understood. In this work, we investigate exozodi mitigation for Earth--Sun-like systems with significant mean motion resonant disk structures. We find that applying a simple high-pass filter allows us to remove structured exozodi to the Poisson noise limit for systems with inclinations $< 60^\circ$ and up to 100 zodis. However, subtracting exozodiacal disk structures from edge-on systems may be challenging, except for cases with densities $<5$ zodis. For systems with three times the dust of the Solar System, which is the median of the best fit to survey data in the habitable zones of nearby Sun-like stars, this method shows promising results for mitigating exozodiacal dust in future HWO observations, even if the dust exhibits significant mean-motion resonance structure.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
Integrated photonic-based coronagraphic systems for future space telescopes
Authors:
Niyati Desai,
Lorenzo König,
Emiel Por,
Roser Juanola-Parramon,
Ruslan Belikov,
Iva Laginja,
Olivier Guyon,
Laurent Pueyo,
Kevin Fogarty,
Olivier Absil,
Lisa Altinier,
Pierre Baudoz,
Alexis Bidot,
Markus Johannes Bonse,
Kimberly Bott,
Bernhard Brandl,
Alexis Carlotti,
Sarah L. Casewell,
Elodie Choquet,
Nicolas B. Cowan,
David Doelman,
J. Fowler,
Timothy D. Gebhard,
Yann Gutierrez,
Sebastiaan Y. Haffert
, et al. (16 additional authors not shown)
Abstract:
The detection and characterization of Earth-like exoplanets around Sun-like stars is a primary science motivation for the Habitable Worlds Observatory. However, the current best technology is not yet advanced enough to reach the 10^-10 contrasts at close angular separations and at the same time remain insensitive to low-order aberrations, as would be required to achieve high-contrast imaging of ex…
▽ More
The detection and characterization of Earth-like exoplanets around Sun-like stars is a primary science motivation for the Habitable Worlds Observatory. However, the current best technology is not yet advanced enough to reach the 10^-10 contrasts at close angular separations and at the same time remain insensitive to low-order aberrations, as would be required to achieve high-contrast imaging of exo-Earths. Photonic technologies could fill this gap, potentially doubling exo-Earth yield. We review current work on photonic coronagraphs and investigate the potential of hybridized designs which combine both classical coronagraph designs and photonic technologies into a single optical system. We present two possible systems. First, a hybrid solution which splits the field of view spatially such that the photonics handle light within the inner working angle and a conventional coronagraph that suppresses starlight outside it. Second, a hybrid solution where the conventional coronagraph and photonics operate in series, complementing each other and thereby loosening requirements on each subsystem. As photonic technologies continue to advance, a hybrid or fully photonic coronagraph holds great potential for future exoplanet imaging from space.
△ Less
Submitted 9 September, 2023;
originally announced September 2023.
-
Visible extreme adaptive optics on extremely large telescopes: Towards detecting oxygen in Proxima Centauri b and analogs
Authors:
J. Fowler,
Sebastiaan Y. Haffert,
Maaike A. M. van Kooten,
Rico Landman,
Alexis Bidot,
Adrien Hours,
Mamadou N'Diaye,
Olivier Absil,
Lisa Altinier,
Pierre Baudoz,
Ruslan Belikov,
Markus Johannes Bonse,
Kimberly Bott,
Bernhard Brandl,
Alexis Carlotti,
Sarah L. Casewell,
Elodie Choquet,
Nicolas B. Cowan,
Niyati Desai,
David Doelman,
Kevin Fogarty,
Timothy D. Gebhard,
Yann Gutierrez,
Olivier Guyon,
Olivier Herscovici-Schiller
, et al. (16 additional authors not shown)
Abstract:
Looking to the future of exo-Earth imaging from the ground, core technology developments are required in visible extreme adaptive optics (ExAO) to enable the observation of atmospheric features such as oxygen on rocky planets in visible light. UNDERGROUND (Ultra-fast AO techNology Determination for Exoplanet imageRs from the GROUND), a collaboration built in Feb. 2023 at the Optimal Exoplanet Imag…
▽ More
Looking to the future of exo-Earth imaging from the ground, core technology developments are required in visible extreme adaptive optics (ExAO) to enable the observation of atmospheric features such as oxygen on rocky planets in visible light. UNDERGROUND (Ultra-fast AO techNology Determination for Exoplanet imageRs from the GROUND), a collaboration built in Feb. 2023 at the Optimal Exoplanet Imagers Lorentz Workshop, aims to (1) motivate oxygen detection in Proxima Centauri b and analogs as an informative science case for high-contrast imaging and direct spectroscopy, (2) overview the state of the field with respect to visible exoplanet imagers, and (3) set the instrumental requirements to achieve this goal and identify what key technologies require further development.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
Chasing rainbows and ocean glints: Inner working angle constraints for the Habitable Worlds Observatory
Authors:
Sophia R. Vaughan,
Timothy D. Gebhard,
Kimberly Bott,
Sarah L. Casewell,
Nicolas B. Cowan,
David S. Doelman,
Matthew Kenworthy,
Johan Mazoyer,
Maxwell A. Millar-Blanchaer,
Victor J. H. Trees,
Daphne M. Stam,
Olivier Absil,
Lisa Altinier,
Pierre Baudoz,
Ruslan Belikov,
Alexis Bidot,
Jayne L. Birkby,
Markus J. Bonse,
Bernhard Brandl,
Alexis Carlotti,
Elodie Choquet,
Dirk van Dam,
Niyati Desai,
Kevin Fogarty,
J. Fowler
, et al. (19 additional authors not shown)
Abstract:
NASA is engaged in planning for a Habitable Worlds Observatory (HabWorlds), a coronagraphic space mission to detect rocky planets in habitable zones and establish their habitability. Surface liquid water is central to the definition of planetary habitability. Photometric and polarimetric phase curves of starlight reflected by an exoplanet can reveal ocean glint, rainbows and other phenomena caused…
▽ More
NASA is engaged in planning for a Habitable Worlds Observatory (HabWorlds), a coronagraphic space mission to detect rocky planets in habitable zones and establish their habitability. Surface liquid water is central to the definition of planetary habitability. Photometric and polarimetric phase curves of starlight reflected by an exoplanet can reveal ocean glint, rainbows and other phenomena caused by scattering by clouds or atmospheric gas. Direct imaging missions are optimised for planets near quadrature, but HabWorlds' coronagraph may obscure the phase angles where such optical features are strongest. The range of accessible phase angles for a given exoplanet will depend on the planet's orbital inclination and/or the coronagraph's inner working angle (IWA). We use a recently-created catalog relevant to HabWorlds of 164 stars to estimate the number of exo-Earths that could be searched for ocean glint, rainbows, and polarization effects due to Rayleigh scattering. We find that the polarimetric Rayleigh scattering peak is accessible in most of the exo-Earth planetary systems. The rainbow due to water clouds at phase angles of ${\sim}20-60^\circ$ would be accessible with HabWorlds for a planet with an Earth equivalent instellation in ${\sim}{46}$ systems, while the ocean glint signature at phase angles of ${\sim}130-170^\circ$ would be accessible in ${\sim}{16}$ systems, assuming an IWA${=}62$ mas ($3λ/D$). Improving the IWA${=}41$ mas ($2λ/D$) increases accessibility to rainbows and glints by factors of approximately 2 and 3, respectively. By observing these scattering features, HabWorlds could detect a surface ocean and water cycle, key indicators of habitability.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
Simulating reflected light coronagraphy of Earth-like exoplanets with a large IR/O/UV space telescope: impact and calibration of smooth exozodiacal dust
Authors:
Jens Kammerer,
Christopher C. Stark,
Kevin J. Ludwick,
Roser Juanola-Parramon,
Bijan Nemati
Abstract:
Observing Earth-like exoplanets orbiting within the habitable zone of Sun-like stars and studying their atmospheres in reflected starlight requires contrasts of $\sim1\mathrm{e}{-10}$ in the visible. At such high contrast, starlight reflected by exozodiacal dust is expected to be a significant source of contamination. Here, we present high-fidelity simulations of coronagraphic observations of a sy…
▽ More
Observing Earth-like exoplanets orbiting within the habitable zone of Sun-like stars and studying their atmospheres in reflected starlight requires contrasts of $\sim1\mathrm{e}{-10}$ in the visible. At such high contrast, starlight reflected by exozodiacal dust is expected to be a significant source of contamination. Here, we present high-fidelity simulations of coronagraphic observations of a synthetic Solar System located at a distance of 10 pc and observed with a 12 m and an 8 m circumscribed aperture diameter space telescope operating at 500 nm wavelength. We explore different techniques to subtract the exozodi and stellar speckles from the simulated images in the face-on, the 30 deg inclined, and the 60 deg inclined case and quantify the remaining systematic noise as a function of the exozodiacal dust level of the system. We find that in the face-on case, the exozodi can be subtracted down to the photon noise limit for exozodi levels up to $\sim1000$ zodi using a simple toy model for the exozodiacal disk, whereas in the 60 deg inclined case this only works up to $\sim50$ zodi. We also investigate the impact of larger wavefront errors and larger system distance, finding that while the former have no significant impact, the latter has a strong (negative) impact. Ultimately, we derive a penalty factor as a function of the exozodi level and system inclination that should be considered in exoplanet yield studies as a realistic estimate for the excess systematic noise from the exozodi.
△ Less
Submitted 6 October, 2022;
originally announced October 2022.
-
Adaptive optics performance of a simulated coronagraph instrument on a large, segmented space telescope in steady state
Authors:
Axel Potier,
Garreth Ruane,
Christopher C. Stark,
Pin Chen,
Ankur Chopra,
Larry D. Dewell,
Roser Juanola-Parramon,
Alison A. Nordt,
Laurent A. Pueyo,
David C. Redding,
A J Eldorado Riggs,
Dan Sirbu
Abstract:
Directly imaging Earth-like exoplanets (``exoEarths'') with a coronagraph instrument on a space telescope requires a stable wavefront with optical path differences limited to tens of picometers RMS during exposure times of a few hours. While the structural dynamics of a segmented mirror can be directly stabilized with telescope metrology, another possibility is to use a closed-loop wavefront sensi…
▽ More
Directly imaging Earth-like exoplanets (``exoEarths'') with a coronagraph instrument on a space telescope requires a stable wavefront with optical path differences limited to tens of picometers RMS during exposure times of a few hours. While the structural dynamics of a segmented mirror can be directly stabilized with telescope metrology, another possibility is to use a closed-loop wavefront sensing and control system in the coronagraph instrument that operates during the science exposures to actively correct the wavefront and relax the constraints on the stability of the telescope. In this paper, we present simulations of the temporal filtering provided using the example of LUVOIR-A, a 15~m segmented telescope concept. Assuming steady-state aberrations based on a finite element model of the telescope structure, we (1)~optimize the system to minimize the wavefront residuals, (2)~ use an end-to-end numerical propagation model to estimate the residual starlight intensity at the science detector, and (3)~predict the number of exoEarth candidates detected during the mission. We show that telescope dynamic errors of 100~pm~RMS can be reduced down to 30~pm~RMS with a magnitude 0 star, improving the contrast performance by a factor of 15. In scenarios where vibration frequencies are too fast for a system that uses natural guide stars, laser sources can increase the flux at the wavefront sensor to increase the servo-loop frequency and mitigate the high temporal frequency wavefront errors. For example, an external laser with an effective magnitude of -4 allows the wavefront from a telescope with 100~pm~RMS dynamic errors and strong vibrations as fast as 16~Hz to be stabilized with residual errors of 10~pm~RMS thereby increasing the number of detected planets by at least a factor of 4.
△ Less
Submitted 29 September, 2022;
originally announced September 2022.
-
Contrast performance of an 8m off-axis, segmented space telescope equipped with an adaptive optics system
Authors:
Axel Potier,
Garreth Ruane,
Kiarash Tajdaran,
Chris Stark,
Pin Chen,
Larry Dewell,
Roser Juanola-Parramon,
Alison Nordt,
Laurent Pueyo,
David Redding,
A J Eldorado Riggs,
Dan Sirbu
Abstract:
The Astro2020 decadal survey recommended an infrared, optical, ultra-violet (IR/O/UV) telescope with a $\sim$6~m inscribed diameter and equipped with a coronagraph instrument to directly image exoEarths in the habitable zone of their host star. A telescope of such size may need to be segmented to be folded and then carried by current launch vehicles. However, a segmented primary mirror introduces…
▽ More
The Astro2020 decadal survey recommended an infrared, optical, ultra-violet (IR/O/UV) telescope with a $\sim$6~m inscribed diameter and equipped with a coronagraph instrument to directly image exoEarths in the habitable zone of their host star. A telescope of such size may need to be segmented to be folded and then carried by current launch vehicles. However, a segmented primary mirror introduces the potential for additional mid spatial frequency optical wavefront instabilities during the science operations that would degrade the coronagraph performance. A coronagraph instrument with a wavefront sensing and control (WS\&C) system can stabilize the wavefront with a picometer precision at high temporal frequencies ($>$1Hz). In this work, we study a realistic set of aberrations based on a finite element model of a slightly larger (8m circumscribed, 6.7m inscribed diameter) segmented telescope with its payload. We model an adaptive optics (AO) system numerically to compute the post-AO residuals. The residuals then feed an end-to-end model of a vortex coronagraph instrument. We report the long exposure contrast and discuss the overall benefits of the adaptive optics system in the flagship mission success.
△ Less
Submitted 17 August, 2022;
originally announced August 2022.
-
LUVOIR-ECLIPS closed-loop adaptive optics performance and contrast predictions
Authors:
Axel Potier,
Garreth Ruane,
Pin Chen,
Ankur Chopra,
Larry Dewell,
Roser Juanola-Parramon,
Alison Nordt,
Laurent Pueyo,
David Redding,
A. J. Eldorado Riggs,
Dan Sirbu
Abstract:
One of the primary science goals of the Large UV/Optical/Infrared Surveyor (LUVOIR) mission concept is to detect and characterize Earth-like exoplanets orbiting nearby stars with direct imaging. The success of its coronagraph instrument ECLIPS (Extreme Coronagraph for Living Planetary Systems) depends on the ability to stabilize the wavefront from a large segmented mirror such that optical path di…
▽ More
One of the primary science goals of the Large UV/Optical/Infrared Surveyor (LUVOIR) mission concept is to detect and characterize Earth-like exoplanets orbiting nearby stars with direct imaging. The success of its coronagraph instrument ECLIPS (Extreme Coronagraph for Living Planetary Systems) depends on the ability to stabilize the wavefront from a large segmented mirror such that optical path differences are limited to tens of picometers RMS during an exposure time of a few hours. In order to relax the constraints on the mechanical stability, ECLIPS will be equipped with a wavefront sensing and control (WS&C) architecture to correct wavefront errors up to temporal frequencies >~1 Hz. These errors may be dominated by spacecraft structural dynamics exciting vibrations at the segmented primary mirror. In this work, we present detailed simulations of the WS&C system within the ECLIPS instrument and the resulting contrast performance. This study assumes wavefront aberrations based on a finite element model of a simulated telescope with spacecraft structural dynamics. Wavefront residuals are then computed according to a model of the adaptive optics system that includes numerical propagation to simulate a realistic wavefront sensor and an analytical model of the temporal performance. An end-to-end numerical propagation model of ECLIPS is then used to estimate the residual starlight intensity distribution at the science detector. We show that the contrast performance depends strongly on the target star magnitude and the spatio-temporal distribution of wavefront errors from the telescope. In cases with significant vibration, we advocate for the use of laser metrology to mitigate high temporal frequency wavefront errors and increase the mission yield.
△ Less
Submitted 13 August, 2021;
originally announced August 2021.
-
Paving the Way to Future Missions: the Roman Space Telescope Coronagraph Technology Demonstration
Authors:
B. Mennesson,
R. Juanola-Parramon,
B. Nemati,
G. Ruane,
V. P. Bailey,
M. Bolcar,
S. Martin,
N. Zimmerman,
C. Stark,
L. Pueyo,
D. Benford,
E. Cady,
B. Crill,
E. Douglas,
B. S. Gaudi,
J. Kasdin,
B. Kern,
J. Krist,
J. Kruk,
T. Luchik,
B. Macintosh,
A. Mandell,
D. Mawet,
J. McEnery,
T. Meshkat
, et al. (11 additional authors not shown)
Abstract:
This document summarizes how far the Nancy Grace Roman Space Telescope Coronagraph Instrument (Roman CGI) will go toward demonstrating high-contrast imaging and spectroscopic requirements for potential future exoplanet direct imaging missions, illustrated by the HabEx and LUVOIR concepts. The assessment is made for two levels of assumed CGI performance: (i) current best estimate (CBE) as of August…
▽ More
This document summarizes how far the Nancy Grace Roman Space Telescope Coronagraph Instrument (Roman CGI) will go toward demonstrating high-contrast imaging and spectroscopic requirements for potential future exoplanet direct imaging missions, illustrated by the HabEx and LUVOIR concepts. The assessment is made for two levels of assumed CGI performance: (i) current best estimate (CBE) as of August 2020, based on laboratory results and realistic end-to-end simulations with JPL-standard Model Uncertainty Factors (MUFs); (ii) CGI design specifications inherited from Phase B requirements. We find that the predicted performance (CBE) of many CGI subsystems compares favorably with the needs of future missions, despite providing more modest point source detection limits than future missions. This is essentially due to the challenging pupil of the Roman Space Telescope; this pupil pushes the coronagraph masks sensitivities to misalignments to be commensurate with future missions. In particular, CGI will demonstrate active low-order wavefront control and photon counting capabilities at levels of performance either higher than, or comparable to, the needs of future missions.
△ Less
Submitted 24 September, 2020; v1 submitted 12 August, 2020;
originally announced August 2020.
-
High-Contrast Testbeds for Future Space-Based Direct Imaging Exoplanet Missions
Authors:
Johan Mazoyer,
Pierre Baudoz,
Ruslan Belikov,
Brendan Crill,
Kevin Fogarty,
Raphael Galicher,
Tyler Groff,
Olivier Guyon,
Roser Juanola-Parramon,
Jeremy Kasdin,
Lucie Leboulleux,
Jorge Llop Sayson,
Dimitri Mawet,
Camilo Mejia Prada,
Bertrand Mennesson,
Mamadou N'Diaye,
Marshall Perrin,
Laurent Pueyo,
Aki Roberge,
Garreth Ruane,
Eugene Serabyn,
Stuart Shaklan,
Nicholas Siegler,
Dan Sirbu,
Remi Soummer
, et al. (3 additional authors not shown)
Abstract:
Instrumentation techniques in the field of direct imaging of exoplanets have greatly advanced over the last two decades. Two of the four NASA-commissioned large concept studies involve a high-contrast instrument for the imaging and spectral characterization of exo-Earths from space: LUVOIR and HabEx. This whitepaper describes the status of 8 optical testbeds in the US and France currently in opera…
▽ More
Instrumentation techniques in the field of direct imaging of exoplanets have greatly advanced over the last two decades. Two of the four NASA-commissioned large concept studies involve a high-contrast instrument for the imaging and spectral characterization of exo-Earths from space: LUVOIR and HabEx. This whitepaper describes the status of 8 optical testbeds in the US and France currently in operation to experimentally validate the necessary technologies to image exo-Earths from space. They explore two complementary axes of research: (i) coronagraph designs and manufacturing and (ii) active wavefront correction methods and technologies. Several instrument architectures are currently being analyzed in parallel to provide more degrees of freedom for designing the future coronagraphic instruments. The necessary level of performance has already been demonstrated in-laboratory for clear off-axis telescopes (HabEx-like) and important efforts are currently in development to reproduce this accomplishment on segmented and/or on-axis telescopes (LUVOIR-like) over the next two years.
△ Less
Submitted 22 July, 2019;
originally announced July 2019.
-
Exploring the composition of icy bodies at the fringes of the Solar System with next generation space telescopes
Authors:
Richard J. Cartwright,
Bryan Holler,
Susan Benecchi,
Roser Juanola-Parramon,
Giada Arney,
Aki Roberge,
Heidi Hammel
Abstract:
Determining the distribution and spectral signature of volatile ices and organics exposed on icy body surfaces can provide crucial clues for deciphering how the outer solar system formed and evolved. Over the past few decades, ground- and space-based telescope observations have probed the compositions of a wide range of icy objects with primordial and processed surfaces, revealing the presence of…
▽ More
Determining the distribution and spectral signature of volatile ices and organics exposed on icy body surfaces can provide crucial clues for deciphering how the outer solar system formed and evolved. Over the past few decades, ground- and space-based telescope observations have probed the compositions of a wide range of icy objects with primordial and processed surfaces, revealing the presence of numerous volatile ices and organic residues. Although these telescope observations have advanced our understanding of icy bodies beyond Saturn, the sensitivity and spatial resolution of collected datasets are limited by the large heliocentric distances of these far-flung objects. Furthermore, most observations have focused on the visible (VIS, 0.4 - 0.7 microns) and near-infrared (NIR, 0.7 - 2.5 microns), with fewer observations at longer NIR wavelengths (2.5 - 5.0 microns) and in the far to near ultraviolet (UV, 0.1 - 0.4 microns), which represents a critical wavelength region for investigating modification of ices and organics by UV photolysis and charged particle radiolysis. Thus, our understanding of icy bodies beyond Saturn is limited by the capabilities of available facilities, and key questions regarding their surface compositions remain to be explored. Next generation space telescopes (NGSTs) with greater sensitivity and angular resolution in the UV, VIS, and longer NIR are therefore needed to help unveil the surface compositions of icy bodies residing at the fringes of our solar system.
△ Less
Submitted 18 March, 2019;
originally announced March 2019.
-
Far-Infrared double-Fourier interferometers and their spectral sensitivity
Authors:
Maxime J. Rizzo,
Lee G. Mundy,
Stephen A. Rinehart,
Arnab Dhabal,
Dale J. Fixsen,
Roser Juanola-Parramon,
Dominic J. Benford,
David T. Leisawitz,
Robert F. Silverberg,
Todd J. Veach
Abstract:
Double-Fourier interferometry is the most viable path to sub-arcsecond spatial resolution for future astronomical instruments that will observe the universe at far-infrared wavelengths. The double transform spatio-spectral interferometry couples pupil plane beam combination with detector arrays to enable imaging spectroscopy of wide fields, that will be key to accomplishing top-level science goals…
▽ More
Double-Fourier interferometry is the most viable path to sub-arcsecond spatial resolution for future astronomical instruments that will observe the universe at far-infrared wavelengths. The double transform spatio-spectral interferometry couples pupil plane beam combination with detector arrays to enable imaging spectroscopy of wide fields, that will be key to accomplishing top-level science goals. The wide field of view and the necessity for these instruments to fly above the opaque atmosphere create unique characteristics and requirements compared to instruments on ground-based telescopes. In this paper, we discuss some characteristics of single-baseline spatio-spectral interferometers. We investigate the impact of intensity and optical path difference noise on the interferogram and the spectral signal-to-noise ratio. We apply our findings to the special case of the Balloon Experimental Twin Telescope for Infrared Interferometry (BETTII), a balloon payload that will be a first application of this technique at far-infrared wavelengths on a flying platform.
△ Less
Submitted 14 July, 2015;
originally announced July 2015.
-
A Demonstration of Spectral and Spatial Interferometry at THz Frequencies
Authors:
William F. Grainger,
Roser Juanola-Parramon,
Peter A. R. Ade,
Matt Griffin,
Flo Liggins,
Enzo Pascale,
Giorgio Savini,
Bruce Swinyard
Abstract:
A laboratory prototype spectral/spatial interferometer has been constructed to demonstrate the feasibility of the double Fourier technique at Far Infrared (FIR) wavelengths (0.15 - 1 THz). It is planned to use this demonstrator to investigate and validate important design features and data processing methods for future astronomical FIR interferometer instruments. In building this prototype we have…
▽ More
A laboratory prototype spectral/spatial interferometer has been constructed to demonstrate the feasibility of the double Fourier technique at Far Infrared (FIR) wavelengths (0.15 - 1 THz). It is planned to use this demonstrator to investigate and validate important design features and data processing methods for future astronomical FIR interferometer instruments. In building this prototype we have had to address several key technologies to provide an end-end system demonstration of this double Fourier interferometer. We report on the first results taken when viewing single slit and double slit sources at the focus of a large collimator used to simulate real sources at infinity. The performance of the prototype instrument for these specific field geometries is analyzed to compare with the observed interferometric fringes and to demonstrate image reconstruction capabilities.
△ Less
Submitted 9 March, 2012;
originally announced March 2012.
