-
On-sky results for the novel integrated micro-lens ring tip-tilt sensor
Authors:
Philipp Hottinger,
Robert J. Harris,
Jonathan Crass,
Philipp-Immanuel Dietrich,
Matthias Blaicher,
Andrew Bechter,
Brian Sands,
Tim J. Morris,
Alastair G. Basden,
Nazim Ali Bharmal,
Jochen Heidt,
Theodoros Anagnos,
Philip L. Neureuther,
Martin Glück,
Jennifer Power,
Jörg-Uwe Pott,
Christian Koos,
Oliver Sawodny,
Andreas Quirrenbach
Abstract:
We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with…
▽ More
We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with the iLocater acquisition camera at the Large Binocular Telescope in November 2019. The limit on the maximum achieved root mean square reconstruction accuracy was found to be 0.19 $λ$/D in both tip and tilt, of which approximately 50% of the power originates at frequencies below 10 Hz. We show the reconstruction accuracy is highly dependent on the estimated Strehl ratio and simulations support the assumption that residual adaptive optics aberrations are the main limit to the reconstruction accuracy. We conclude that this sensor is ideally suited to remove post-adaptive optics non-common path tip tilt residuals. We discuss the next steps for the concept development, including optimizations of the lens and fiber, tuning of the correction algorithm and selection of optimal science cases.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
3D-M3: High-spatial resolution spectroscopy with extreme AO and 3D printed micro-lenslets
Authors:
Theodoros Anagnos,
Mareike Trappen,
Blaise C. Kuo Tiong,
Tobias Feger,
Stephanos Yerolatsitis,
Robert J. Harris,
Julien Lozi,
Nemanja Jovanovic,
Tim A. Birks,
Sébastien Vievard,
Olivier Guyon,
Itandehui Gris-Sánchez,
Sergio G. Leon-Saval,
Barnaby Norris,
Sebastiaan Y. Haffert,
Phillip Hottinger,
Matthias Blaicher,
Yilin Xu,
Christopher H. Betters,
Christian Koos,
David W. Coutts,
Christian Schwab,
Andreas Quirrenbach
Abstract:
By combining IFS with ExAO we are now able to resolve objects close to the diffraction-limit of large telescopes, exploring new science cases. We introduce an IFU designed to couple light with a minimal platescale from the SCExAO facility at NIR wavelengths to a SM spectrograph. The IFU has a 3D-printed MLA on top of a custom SM MCF, to optimize the coupling of light into the fiber cores. We demon…
▽ More
By combining IFS with ExAO we are now able to resolve objects close to the diffraction-limit of large telescopes, exploring new science cases. We introduce an IFU designed to couple light with a minimal platescale from the SCExAO facility at NIR wavelengths to a SM spectrograph. The IFU has a 3D-printed MLA on top of a custom SM MCF, to optimize the coupling of light into the fiber cores. We demonstrate the potential of the instrument via initial results from the first on-sky runs at the 8.2 m Subaru Telescope with a spectrograph using off-the-shelf optics, allowing for rapid development with low cost.
△ Less
Submitted 14 June, 2021; v1 submitted 12 May, 2021;
originally announced May 2021.
-
An innovative integral field unit upgrade with 3D-printed micro-lenses for the RHEA at Subaru
Authors:
Theodoros Anagnos,
Pascal Maier,
Philipp Hottinger,
Chris Betters,
Tobias Feger,
Sergio G. Leon-Saval,
Itandehui Gris-Sánchez,
Stephanos Yerolatsitis,
Julien Lozi,
Tim A. Birks,
Sebastian Vievard,
Nemanja Jovanovic,
Adam D. Rains,
Michael J. Ireland,
Robert J. Harris,
Blaise C. Kuo Tiong,
Olivier Guyon,
Barnaby Norris,
Sebastiaan Y. Haffert,
Matthias Blaicher,
Yilin Xu,
Moritz Straub,
Jörg-Uwe Pott,
Oliver Sawodny,
Philip L. Neureuther
, et al. (4 additional authors not shown)
Abstract:
In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom bu…
▽ More
In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom built injection fiber system with 3D-printed micro-lenses on top of it for the replicable high-resolution exoplanet and asteroseismology spectrograph at Subaru in combination with extreme adaptive optics of SCExAO, proved its high efficiency in a lab environment, manifesting up to ~77% of the theoretical predicted performance.
△ Less
Submitted 24 January, 2021;
originally announced January 2021.
-
Diffraction-limited integral-field spectroscopy for extreme adaptive optics systems with the Multi-Core fiber-fed Integral-Field Unit
Authors:
Sebastiaan Y. Haffert,
Robert J. Harris,
Alessio Zanutta,
Fraser A. Pike,
Andrea Bianco,
Eduardo Redaelli,
Aurélien Benoît,
David G. MacLachlan,
Calum A. Ross,
Itandehui Gris-Sánchez,
Mareike D. Trappen,
Yilin Xu,
Matthias Blaicher,
Pascal Maier,
Giulio Riva,
Baptiste Sinquin,
Caroline Kulcsár,
Nazim Ali Bharmal,
Eric Gendron,
Lazar Staykov,
Tim J. Morris,
Santiago Barboza,
Norbert Muench,
Lisa Bardou,
Léonard Prengère
, et al. (9 additional authors not shown)
Abstract:
Direct imaging instruments have the spatial resolution to resolve exoplanets from their host star. This enables direct characterization of the exoplanets atmosphere, but most direct imaging instruments do not have spectrographs with high enough resolving power for detailed atmospheric characterization. We investigate the use of a single-mode diffraction-limited integral-field unit that is compact…
▽ More
Direct imaging instruments have the spatial resolution to resolve exoplanets from their host star. This enables direct characterization of the exoplanets atmosphere, but most direct imaging instruments do not have spectrographs with high enough resolving power for detailed atmospheric characterization. We investigate the use of a single-mode diffraction-limited integral-field unit that is compact and easy to integrate into current and future direct imaging instruments for exoplanet characterization. This achieved by making use of recent progress in photonic manufacturing to create a single-mode fiber-fed image reformatter. The fiber-link is created with 3D printed lenses on top of a single-mode multi-core fiber that feeds an ultrafast laser inscribed photonic chip that reformats the fiber into a pseudo-slit. We then couple it to a first-order spectrograph with a triple stacked volume phase holographic grating for a high efficiency over a large bandwidth. The prototype system has had a successful first-light observing run at the 4.2 meter William Herschel Telescope. The measured on-sky resolving power is between 2500 and 3000, depending on the wavelength. With our observations we show that single-mode integral-field spectroscopy is a viable option for current and future exoplanet imaging instruments.
△ Less
Submitted 8 September, 2020;
originally announced September 2020.
-
Focal Plane Tip-Tilt Sensing for Improved Single-Mode Fiber Coupling using a 3D-printed Microlens-Ring
Authors:
Philipp Hottinger,
Robert J. Harris,
Philipp-Immanuel Dietrich,
Matthias Blaicher,
Andrew Bechter,
Jonathan Crass,
Martin Glück,
Jörg-Uwe Pott,
Nazim A. Bharmal,
Alastair Basden,
Tim J. Morris,
Christian Koos,
Oliver Sawodny,
Andreas Quirrenbach
Abstract:
Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to couple light into single-mode fibers (SMFs). However, due to their small size, efficient coupling is very sensitive to the quality of the fiber alignment, beam d…
▽ More
Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to couple light into single-mode fibers (SMFs). However, due to their small size, efficient coupling is very sensitive to the quality of the fiber alignment, beam drifts and higher-frequency tip-tilt aberrations caused by telescope mechanics and vibrations. These residual aberrations are not always sensed and corrected by the AO system, leading to unacceptable losses. This is particularly severe for the Extremely Large Telescopes, where their huge structure will mean vibrations increase and optimal AO solutions are even more difficult to implement. We have created a focal plane sensor to correct for residual aberrations by surrounding the SMF with six Multi-mode fibers (MMFs). On each of the MMFs sits a printed freeform lens, making up a six-element micro-lens ring to refract the light into these surrounding MMFs and thus minimizing light loss in the gap between the fiber cores. This means when the beam is near diffraction limited and centered almost all light couples to the SMF. When the beam is misaligned, it couples to the surrounding cores, which are read out by a detector and processed by the DARC software driving a tip-tilt mirror. Currently we are aiming to detect and correct only tip-tilt aberrations. However, choosing to surround the central fiber with six sensing locations potentially allows us to investigate higher order correction modes. Here we present the design and performance our prototype system. This has been designed for use with the iLocater fiber injection system at the LBT and can easily be scaled to larger telescopes. We present test results from the KOOL laboratory and initial integration with the iLocater instrument.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
Micro-lens array as tip-tilt sensor for single-mode fiber coupling
Authors:
Philipp Hottinger,
Robert J. Harris,
Philipp-Immanuel Dietrich,
Matthias Blaicher,
Martin Glück,
Andrew Bechter,
Jonathan Crass,
Jörg-Uwe Pott,
Christian Koos,
Oliver Sawodny,
Andreas Quirrenbach
Abstract:
We introduce a design for a tip-tilt sensor with integrated single-mode fiber coupling for use with the front-end prototype of the iLocater spectrograph at the Large Binocular Telescope to detect vibrations that occur within the optical train. This sensor is made up of a micro-lens array printed on top of a fiber bundle consisting of a central single-mode fiber and six surrounding multi-mode fiber…
▽ More
We introduce a design for a tip-tilt sensor with integrated single-mode fiber coupling for use with the front-end prototype of the iLocater spectrograph at the Large Binocular Telescope to detect vibrations that occur within the optical train. This sensor is made up of a micro-lens array printed on top of a fiber bundle consisting of a central single-mode fiber and six surrounding multi-mode fibers. The design in based on a previous prototype that utilized a multi-core fiber with seven single-mode fibers. With this updated design, we are able to achieve a better sensing throughput. We report on the modeled performance: if the beam is perfectly aligned, 69% light is coupled into the central single-mode fiber feeding the scientific instrument. When the beam is not aligned, some of the light will be coupled into the outer sensing fibers, providing the position of the beam for tip-tilt correction. For this design we show that there is a linear response in the sensing fibers when the beam is subject to tip-tilt movement. Furthermore we introduce an adaptive optics testbed, which we call the Koenigstuhl Observatory Opto-mechatronics Laboratory (KOOL), this testbed currently simulates vibrations at the Large Binocular Telescope, and in collaboration we have extended it to allow single-mode fiber coupling tests.
△ Less
Submitted 9 August, 2018;
originally announced August 2018.