-
Current laboratory performance of starlight suppression systems, and potential pathways to desired Habitable Worlds Observatory exoplanet science capabilities
Authors:
Bertrand Mennesson,
Ruslan Belikov,
Emiel Por,
Eugene Serabyn,
Garreth Ruane,
A. J. Eldorado Riggs,
Dan Sirbu,
Laurent Pueyo,
Remi Soummer,
Jeremy Kasdin,
Stuart Shaklan,
Byoung-Joon Seo,
Christopher Stark,
Eric Cady,
Pin Chen,
Brendan Crill,
Kevin Fogarty,
Alexandra Greenbaum,
Olivier Guyon,
Roser Juanola-Parramon,
Brian Kern,
John Krist,
Bruce Macintosh,
David Marx,
Dimitri Mawet
, et al. (12 additional authors not shown)
Abstract:
We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis t…
▽ More
We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis telescopes, either monolithic or segmented. For a given angular separation and spectral bandwidth, the performance of each starlight suppression system is characterized by the values of raw contrast (before image processing), off-axis (exoplanet) core throughput, and post-calibration contrast (the final 1 sigma detection limit of off-axis point sources, after image processing). To place the current laboratory results in the perspective of the future Habitable Worlds Observatory (HWO) mission, we simulate visible observations of a fiducial Earth/Sun twin system at 12 pc, assuming a 6m (inscribed diameter) collecting aperture and a realistic end-to-end optical throughput. The exposure times required for broadband exoearth detection (20% bandwidth around a wavelength of 0.55 microns) and visible spectroscopic observations (R=70) are then computed assuming various levels of starlight suppression performance, including the values currently demonstrated in the laboratory. Using spectroscopic exposure time as a simple metric, our results point to key starlight suppression system design performance improvements and trades to be conducted in support of HWO exoplanet science capabilities. These trades may be explored via numerical studies, lab experiments, as well as high contrast space-based observations and demonstrations.
△ Less
Submitted 27 April, 2024;
originally announced April 2024.
-
End-to-end numerical modeling of the Roman Space Telescope coronagraph
Authors:
John E. Krist,
John B. Steeves,
Brandon D. Dube,
A. J. Eldorado Riggs,
Brian D. Kern,
David S. Marx,
Eric J. Cady,
Hanying Zhou,
Ilya Y. Poberezhskiy,
Caleb W. Baker,
James P. McGuire,
Bijan Nemati,
Gary M. Kuan,
Bertrand Mennesson,
John T. Trauger,
Navtej S. Saini,
Sergi Hildebrandt Rafels
Abstract:
The Roman Space Telescope will have the first advanced coronagraph in space, with deformable mirrors for wavefront control, low-order wavefront sensing and maintenance, and a photon-counting detector. It is expected to be able to detect and characterize mature, giant exoplanets in reflected visible light. Over the past decade the performance of the coronagraph in its flight environment has been si…
▽ More
The Roman Space Telescope will have the first advanced coronagraph in space, with deformable mirrors for wavefront control, low-order wavefront sensing and maintenance, and a photon-counting detector. It is expected to be able to detect and characterize mature, giant exoplanets in reflected visible light. Over the past decade the performance of the coronagraph in its flight environment has been simulated with increasingly detailed diffraction and structural/thermal finite element modeling. With the instrument now being integrated in preparation for launch within the next few years, the present state of the end-to-end modeling is described, including the measured flight components such as deformable mirrors. The coronagraphic modes are thoroughly described, including characteristics most readily derived from modeling. The methods for diffraction propagation, wavefront control, and structural and thermal finite-element modeling are detailed. The techniques and procedures developed for the instrument will serve as a foundation for future coronagraphic missions such as the Habitable Worlds Observatory.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
Wavefront sensing and control in space-based coronagraph instruments using Zernike's phase-contrast method
Authors:
Garreth Ruane,
J. Kent Wallace,
John Steeves,
Camilo Mejia Prada,
Byoung-Joon Seo,
Eduardo Bendek,
Carl Coker,
Pin Chen,
Brendan Crill,
Jeff Jewell,
Brian Kern,
David Marx,
Phillip K. Poon,
David Redding,
A J Eldorado Riggs,
Nicholas Siegler,
Robert Zimmer
Abstract:
Future space telescopes with coronagraph instruments will use a wavefront sensor (WFS) to measure and correct for phase errors and stabilize the stellar intensity in high-contrast images. The HabEx and LUVOIR mission concepts baseline a Zernike wavefront sensor (ZWFS), which uses Zernike's phase contrast method to convert phase in the pupil into intensity at the WFS detector. In preparation for th…
▽ More
Future space telescopes with coronagraph instruments will use a wavefront sensor (WFS) to measure and correct for phase errors and stabilize the stellar intensity in high-contrast images. The HabEx and LUVOIR mission concepts baseline a Zernike wavefront sensor (ZWFS), which uses Zernike's phase contrast method to convert phase in the pupil into intensity at the WFS detector. In preparation for these potential future missions, we experimentally demonstrate a ZWFS in a coronagraph instrument on the Decadal Survey Testbed in the High Contrast Imaging Testbed facility at NASA's Jet Propulsion Laboratory. We validate that the ZWFS can measure low- and mid-spatial frequency aberrations up to the control limit of the deformable mirror, with surface height sensitivity as small as 1 pm, using a configuration similar to the HabEx and LUVOIR concepts. Furthermore, we demonstrate closed-loop control, resolving an individual DM actuator, with residuals consistent with theoretical models. In addition, we predict the expected performance of a ZWFS on future space telescopes using natural starlight from a variety of spectral types. The most challenging scenarios require ~1 hr of integration time to achieve picometer sensitivity. This timescale may be drastically reduced by using internal or external laser sources for sensing purposes. The experimental results and theoretical predictions presented here advance the WFS technology in the context of the next generation of space telescopes with coronagraph instruments.
△ Less
Submitted 3 November, 2020; v1 submitted 20 October, 2020;
originally announced October 2020.
-
Microelectromechanical deformable mirror development for high-contrast imaging, part 2: the impact of quantization errors on coronagraph image contrast
Authors:
Garreth Ruane,
Daniel Echeverri,
Eduardo Bendek,
Brian D. Kern,
David Marx,
Dimitri Mawet,
Camilo Mejia Prada,
A J Eldorado Riggs,
Byoung-Joon Seo,
Eugene Serabyn,
Stuart Shaklan
Abstract:
Stellar coronagraphs rely on deformable mirrors (DMs) to correct wavefront errors and create high contrast images. Imperfect control of the DM limits the achievable contrast and, therefore, the DM control electronics must provide fine surface height resolution and low noise. Here, we study the impact of quantization errors due to the DM electronics on the image contrast using experimental data fro…
▽ More
Stellar coronagraphs rely on deformable mirrors (DMs) to correct wavefront errors and create high contrast images. Imperfect control of the DM limits the achievable contrast and, therefore, the DM control electronics must provide fine surface height resolution and low noise. Here, we study the impact of quantization errors due to the DM electronics on the image contrast using experimental data from the High Contrast Imaging Testbed (HCIT) facility at NASA's Jet Propulsion Laboratory (JPL). We find that the simplest analytical model gives optimistic predictions compared to real cases, with contrast up to 3 times better, which leads to DM surface height resolution requirements that are incorrectly relaxed by 70%. We show that taking into account the DM actuator shape, or influence function, improves the analytical predictions. However, we also find that end-to-end numerical simulations of the wavefront sensing and control process provide the most accurate predictions and recommend such an approach for setting robust requirements on the DM control electronics. From our experimental and numerical results, we conclude that a surface height resolution of approximately 6pm is required for imaging temperate terrestrial exoplanets around Solar-type stars at wavelengths as small as 450nm with coronagraph instruments on future space telescopes. Finally, we list the recognizable characteristics of quantization errors that may help determine if they are a limiting factor.
△ Less
Submitted 7 October, 2020;
originally announced October 2020.