-
High Efficiency Echelle Gratings for the Far Ultraviolet
Authors:
Nicholas Kruczek,
Drew M. Miles,
Brian Fleming,
Randall McEntaffer,
Kevin France,
Fabien Grisé,
Stephan McCandliss
Abstract:
Modern grating manufacturing techniques suffer from inherent issues that limit their peak efficiencies. The anisotropic etching of silicon facilitates the creation of custom gratings that have sharp and atomically smooth facets, directly addressing these issues. We describe work to fabricate and characterize etched silicon echelles optimized for the far ultraviolet (FUV; 90 - 180 nm) bandpass. We…
▽ More
Modern grating manufacturing techniques suffer from inherent issues that limit their peak efficiencies. The anisotropic etching of silicon facilitates the creation of custom gratings that have sharp and atomically smooth facets, directly addressing these issues. We describe work to fabricate and characterize etched silicon echelles optimized for the far ultraviolet (FUV; 90 - 180 nm) bandpass. We fabricate two echelles that have similar parameters to the mechanically ruled grating flown on the CHESS sounding rocket. We demonstrate a 42% increase in peak order efficiency and an 83% decrease in interorder scatter using these gratings. We also present analysis on where the remaining efficiency resides. These demonstrated FUV echelle improvements benefit the faint source sensitivity and high-resolution performance of future UV observatories.
△ Less
Submitted 15 July, 2022;
originally announced July 2022.
-
A Primer for Telemetry Interfacing in Accordance with NASA Standards Using Low Cost FPGAs
Authors:
Jake A. McCoy,
Ted B. Schultz,
James H. Tutt,
Thomas Rogers,
Drew M. Miles,
Randall L. McEntaffer
Abstract:
Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost alternatives including custom hardware, microcontrollers and field-programmable gate arrays (FPGAs). This paper outlines how a TM interface (TMIF) for detector…
▽ More
Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost alternatives including custom hardware, microcontrollers and field-programmable gate arrays (FPGAs). This paper outlines how a TM interface (TMIF) for detectors on a sounding rocket with asynchronous parallel digital output can be implemented using low cost FPGAs and minimal custom hardware. Low power consumption and high speed FPGAs are available as commercial off-the-shelf (COTS) products and can be used to develop the main component of the TMIF. Then, only a small amount of additional hardware is required for signal buffering and level translating. This paper also discusses how this system can be tested with a simulated TM chain in the small laboratory setting using FPGAs and COTS specialized data acquisition products.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Generating Electron Beam Lithography Write Parameters from the FORTIS Holographic Grating Solution
Authors:
Mackenzie Carlson,
Stephan McCandliss,
Randall McEntaffer,
Fabien Grisé,
Nicholas Kruczek,
Brian Fleming
Abstract:
The Far-UV Off Rowland-circle Telescope for Imaging and Spectroscopy (FORTIS) has been successful in maturing technologies for carrying out multi-object spectroscopy in the far-UV, including: the successful implementation of the Next Generation of Microshutter Arrays; large-area microchannel plate detectors; and an aspheric "dual-order" holographically ruled diffraction grating with curved, variab…
▽ More
The Far-UV Off Rowland-circle Telescope for Imaging and Spectroscopy (FORTIS) has been successful in maturing technologies for carrying out multi-object spectroscopy in the far-UV, including: the successful implementation of the Next Generation of Microshutter Arrays; large-area microchannel plate detectors; and an aspheric "dual-order" holographically ruled diffraction grating with curved, variably-spaced grooves with a laminar (rectangular) profile. These optical elements were used to construct an efficient and minimalist "two-bounce" spectro-telescope in a Gregorian configuration. However, the susceptibility to Lyman alpha (Ly$α$) scatter inherent to the dual order design has been found to be intractably problematic, motivating our move to an "Off-Axis" design. OAxFORTIS will mitigate its susceptibility to Ly$α$ by enclosing the optical path, so the detector only receives light from the grating. The new design reduces the collecting area by a factor of 2, but the overall effective area can be regained and improved through the use of new high efficiency reflective coatings, and with the use of a blazed diffraction grating. This latter key technology has been enabled by recent advancements in creating very high efficiency blazed gratings with impressive smoothness using electron beam lithography and chemical etching to create grooves in crystalline silicon. Here we discuss the derivation for the OAxFORTIS grating solution as well as methods used to transform the FORTIS holographic grating recording parameters (following the formalism of Noda et al.1974a,b), into curved and variably-spaced rulings required to drive the electron beam lithography write-head in three dimensions. We will also discuss the process for selecting silicon wafers with the proper orientation of the crystalline planes and give an update on our fabrication preparations.
△ Less
Submitted 20 August, 2021;
originally announced August 2021.
-
Metrology for Measuring Custom Periodicities on Diffraction Gratings
Authors:
Ningxiao Zhang,
Randall McEntaffer,
Ross McCurdy,
Casey DeRoo
Abstract:
We present a new, inexpensive, bench-top method for measuring groove period over large areas with high mapping resolution and high measurement accuracy, dubbed the grating mapper for accurate period (GMAP). The GMAP has the ability to measure large groove period changes and non-parallel grooves, both of which cannot be measured via optical interferometry. In this paper, we detail the calibration a…
▽ More
We present a new, inexpensive, bench-top method for measuring groove period over large areas with high mapping resolution and high measurement accuracy, dubbed the grating mapper for accurate period (GMAP). The GMAP has the ability to measure large groove period changes and non-parallel grooves, both of which cannot be measured via optical interferometry. In this paper, we detail the calibration and setup of the GMAP, and employ the instrument to measure three distinct gratings. Two of these measured gratings have customized groove patterns that prevent them from being measured via other traditional methods, such as optical interferometry. Our implementation of this tool achieves a spatial resolution of 0.1 mm$\times$0.1 mm and a period error of 1.7 nm for a 3 $μ$m size groove period.
△ Less
Submitted 22 April, 2021;
originally announced April 2021.
-
Fabrication of astronomical x-ray reflection gratings using thermally activated selective topography equilibration
Authors:
Jake A. McCoy,
Randall L. McEntaffer,
Chad M. Eichfeld
Abstract:
Thermally activated selective topography equilibration (TASTE) enables the creation of 3D structures in resist using grayscale electron-beam lithography followed by a thermal treatment to induce a selective polymer reflow. A blazed grating topography can be created by reflowing repeating staircase patterns in resist into wedge-like structures. Motivated by astronomical applications, such patterns…
▽ More
Thermally activated selective topography equilibration (TASTE) enables the creation of 3D structures in resist using grayscale electron-beam lithography followed by a thermal treatment to induce a selective polymer reflow. A blazed grating topography can be created by reflowing repeating staircase patterns in resist into wedge-like structures. Motivated by astronomical applications, such patterns with periodicities 840 nm and 400 nm have been fabricated in 130 nm-thick PMMA using TASTE to provide a base for X-ray reflection gratings. A path forward to integrate this alternative blazing technique into grating fabrication recipes is discussed.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
A Comprehensive Line-Spread Function Error Budget for the Off-Plane Grating Rocket Experiment
Authors:
Benjamin D. Donovan,
Randall L. McEntaffer,
James H. Tutt,
Bridget C. O'Meara,
Fabien Grisé,
William W. Zhang,
Michael P. Biskach,
Timo T. Saha,
Andrew D. Holland,
Daniel Evan,
Matthew R. Lewis,
Matthew R. Soman,
Karen Holland,
David Colebrook,
Fraser Cooper,
David Farn
Abstract:
The Off-plane Grating Rocket Experiment (OGRE) is a soft X-ray grating spectrometer to be flown on a suborbital rocket. The payload is designed to obtain the highest-resolution soft X-ray spectrum of Capella to date with a resolution goal of $R(λ/Δλ)>2000$ at select wavelengths in its 10--55 Angstrom bandpass of interest. The optical design of the spectrometer realizes a theoretical maximum resolu…
▽ More
The Off-plane Grating Rocket Experiment (OGRE) is a soft X-ray grating spectrometer to be flown on a suborbital rocket. The payload is designed to obtain the highest-resolution soft X-ray spectrum of Capella to date with a resolution goal of $R(λ/Δλ)>2000$ at select wavelengths in its 10--55 Angstrom bandpass of interest. The optical design of the spectrometer realizes a theoretical maximum resolution of $R\approx5000$, but this performance does not consider the finite performance of the individual spectrometer components, misalignments between components, and in-flight pointing errors. These errors all degrade the performance of the spectrometer from its theoretical maximum. A comprehensive line-spread function (LSF) error budget has been constructed for the OGRE spectrometer to identify contributions to the LSF, to determine how each of these affects the LSF, and to inform performance requirements and alignment tolerances for the spectrometer. In this document, the comprehensive LSF error budget for the OGRE spectrometer is presented, the resulting errors are validated via raytrace simulations, and the implications of these results are discussed.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
X-ray verification of sol-gel resist shrinkage in substrate-conformal imprint lithography for a replicated blazed reflection grating
Authors:
Jake A. McCoy,
Marc A. Verschuuren,
Drew M. Miles,
Randall L. McEntaffer
Abstract:
Surface-relief gratings fabricated through nanoimprint lithography (NIL) are prone to topographic distortion induced by resist shrinkage. Characterizing the impact of this effect on blazed diffraction efficiency is particularly important for applications in astrophysical spectroscopy at soft x-ray wavelengths ($λ\approx 0.5 - 5$~nm) that call for the mass-production of large-area grating replicas…
▽ More
Surface-relief gratings fabricated through nanoimprint lithography (NIL) are prone to topographic distortion induced by resist shrinkage. Characterizing the impact of this effect on blazed diffraction efficiency is particularly important for applications in astrophysical spectroscopy at soft x-ray wavelengths ($λ\approx 0.5 - 5$~nm) that call for the mass-production of large-area grating replicas with sub-micron, sawtooth surface-relief profiles. A variant of NIL that lends itself well for this task is substrate-conformal imprint lithography (SCIL), which uses a flexible, composite stamp formed from a rigid master template to imprint nanoscale features in an inorganic resist that cures thermodynamically through a silica sol-gel process. While SCIL enables the production of several hundred imprints before stamp degradation and avoids many of the detriments associated with large-area imprinting in NIL, the sol-gel resist suffers shrinkage dependent on the post-imprint cure temperature. Through atomic force microscopy and diffraction-efficiency testing at beamline 6.3.2 of the Advanced Light Source, the impact of this effect on blaze response is constrained for a $\sim$160-nm-period grating replica cured at 90$^{\circ}$C. Results demonstrate a $\sim$2$^{\circ}$ reduction in blaze angle relative to the master grating, which was fabricated by anisotropic wet etching in $\langle 311 \rangle$-oriented silicon to yield a facet angle close to 30$^{\circ}$.
△ Less
Submitted 27 October, 2020;
originally announced November 2020.
-
REX: X-ray experiment on the Water Recovery Rocket
Authors:
Martin Urban,
Ondrej Nentvich,
Tomas Baca,
Ivo Vertat,
Veronika Marsikova,
Daniela Doubravova,
Vladimir Daniel,
Adolf Inneman,
Ladisla Pina,
Randall L. McEntaffer,
Ted B. Schultz,
Drew M. Miles,
James H. Tutt
Abstract:
This paper presents Rocket Experiment (REX) that was part of a dual payload rocket campaign for NASA's sounding rocket Black Brant IX with water recovery technology. This mission was a suborbital sounding rocket flight that was launched and recovered on April 4, 2018 and targeted the Vela supernova remnant. The purpose of REX was to classify the Technology Readiness Level of onboard devices design…
▽ More
This paper presents Rocket Experiment (REX) that was part of a dual payload rocket campaign for NASA's sounding rocket Black Brant IX with water recovery technology. This mission was a suborbital sounding rocket flight that was launched and recovered on April 4, 2018 and targeted the Vela supernova remnant. The purpose of REX was to classify the Technology Readiness Level of onboard devices designed for space applications. The devices were two wide-field X-ray telescopes consisting of a combination of Lobster-Eye (LE) optics with an uncooled Timepix detector (256 x 256 px @ 55 um), and additional sensors. The first telescope uses a two-dimensional combination of LE modules with a focal length of 1 m and a Field of View (FOV) of 1.0 x 1.2 deg and operates in the energy range of 3 - 60 keV. The second telescope was a one-dimensional LE with a focal length of 250 mm and a FOV of 2.7 x 8.0 deg for the energy range 3 - 40 keV. The X-ray telescopes were supplemented by a camera in the visible spectrum with 1,280 x 1,024 px resolution, which was used to obtain images of the observed sources and to verify the resulting pointing of the rocket carrier. Other devices also include infrared array sensors and inertial measurement units tested for future small satellite missions. The data handler and communication system were built using the Robot Operating System, and both the system and the electronics were deployed and operated in flight. The hardware was successfully recovered after the launch and the data were extracted.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Performance Testing of a Large-Format Reflection Grating Prototype for a Suborbital Rocket Payload
Authors:
Benjamin D. Donovan,
Randall L. McEntaffer,
Casey T. DeRoo,
James H. Tutt,
Fabien Grisé,
Chad M. Eichfel,
Oren Z. Gall,
Vadim Burwitz,
Gisela Hartner,
Carlo Pelliciari,
Marlis-Madeleine La Caria
Abstract:
The soft X-ray grating spectrometer on board the Off-plane Grating Rocket Experiment (OGRE) hopes to achieve the highest resolution soft X-ray spectrum of an astrophysical object when it is launched via suborbital rocket. Paramount to the success of the spectrometer are the performance of the $>250$ reflection gratings populating its reflection grating assembly. To test current grating fabrication…
▽ More
The soft X-ray grating spectrometer on board the Off-plane Grating Rocket Experiment (OGRE) hopes to achieve the highest resolution soft X-ray spectrum of an astrophysical object when it is launched via suborbital rocket. Paramount to the success of the spectrometer are the performance of the $>250$ reflection gratings populating its reflection grating assembly. To test current grating fabrication capabilities, a grating prototype for the payload was fabricated via electron-beam lithography at The Pennsylvania State University's Materials Research Institute and was subsequently tested for performance at Max Planck Institute for Extraterrestrial Physics' PANTER X-ray Test Facility. Bayesian modeling of the resulting data via Markov chain Monte Carlo (MCMC) sampling indicated that the grating achieved the OGRE single-grating resolution requirement of $R_{g}(λ/Δλ)>4500$ at the 94% confidence level. The resulting $R_g$ posterior probability distribution suggests that this confidence level is likely a conservative estimate though, since only a finite $R_g$ parameter space was sampled and the model could not constrain the upper bound of $R_g$ to less than infinity. Raytrace simulations of the system found that the observed data can be reproduced with a grating performing at $R_g=\infty$. It is therefore postulated that the behavior of the obtained $R_g$ posterior probability distribution can be explained by a finite measurement limit of the system and not a finite limit on $R_g$. Implications of these results and improvements to the test setup are discussed.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
Limiting Spectral Resolution of a Reflection Grating Made via Electron-Beam Lithography
Authors:
Casey T. DeRoo,
Jared Termini,
Fabien Grise,
Randall L. McEntaffer,
Benjamin D. Donovan,
Chad Eichfeld
Abstract:
Gratings enable dispersive spectroscopy from the X-ray to the optical, and feature prominently in proposed flagships and SmallSats alike. The exacting performance requirements of these future missions necessitate assessing whether the present state-of-the-art in grating manufacture will limit spectrometer performance. In this work, we manufacture a 1.5 mm thick, 1000 nm period at grating using ele…
▽ More
Gratings enable dispersive spectroscopy from the X-ray to the optical, and feature prominently in proposed flagships and SmallSats alike. The exacting performance requirements of these future missions necessitate assessing whether the present state-of-the-art in grating manufacture will limit spectrometer performance. In this work, we manufacture a 1.5 mm thick, 1000 nm period at grating using electron-beam lithography (EBL), a promising lithographic technique for patterning gratings for future astronomical observatories. We assess the limiting spectral resolution of this grating by interferometrically measuring the diffracted wavefronts produced in +/-1st order. Our measurements show this grating has a performance of at least R ~ 14,600, and that our assessment is bounded by the error of our interferometric measurement. The impact of EBL stitching error on grating performance is quantifed, and a path to measuring the period error of customized, curved gratings is presented.
△ Less
Submitted 14 September, 2020;
originally announced September 2020.
-
Extreme Ultraviolet and Soft X-Ray Diffraction Efficiency of a Blazed Reflection Grating Fabricated by Thermally Activated Selective Topography Equilibration
Authors:
Jake A. McCoy,
Randall L. McEntaffer,
Drew M. Miles
Abstract:
Future observatories utilizing reflection grating spectrometers for extreme ultraviolet (EUV) and soft X-ray (SXR) spectroscopy require high-fidelity gratings with both blazed groove facets and custom groove layouts that are often fanned or feature a slight curvature. While fabrication procedures centering on wet anisotropic etching in monocrystalline silicon produce highly efficient blazed gratin…
▽ More
Future observatories utilizing reflection grating spectrometers for extreme ultraviolet (EUV) and soft X-ray (SXR) spectroscopy require high-fidelity gratings with both blazed groove facets and custom groove layouts that are often fanned or feature a slight curvature. While fabrication procedures centering on wet anisotropic etching in monocrystalline silicon produce highly efficient blazed gratings, the precision of a nonparallel groove layout is limited by the cubic structure of the silicon crystal. This motivates the pursuit of alternative techniques to grating manufacture, namely thermally activated selective topography equilibration (TASTE), which uses gray-scale electron-beam lithography to pattern multilevel structures in resist followed by an optimized polymer thermal reflow to smooth the 3D patterns into continuous surface relief profiles. Using TASTE, a mold for a reflection grating with a periodicity of 400 nm and grooves resembling an asymmetric sawtooth was patterned in 130 nm thick poly(methyl methacrylate) resist on a silicon substrate over a 50 mm by 7.5 mm area. This structure was coated with 15 nm of gold by electron-beam physical vapor deposition using titanium as an adhesion layer and then tested for EUV and SXR diffraction efficiency at beamline 6.3.2 of the Advanced Light Source synchrotron facility. Results demonstrate a quasi-blaze response characteristic of a 27 degree blaze angle with groove facets smooth to 1.5 nm rms. Absolute peak-order efficiency ranges from 75% to 25%, while total relative efficiency measures gap90% across the measured bandpass of 15.5 nm > lambda > 1.55 nm.
△ Less
Submitted 13 March, 2020;
originally announced March 2020.
-
Line Spread Functions of Blazed Off-Plane Gratings Operated in the Littrow Mounting
Authors:
Casey T. DeRoo,
Randall L. McEntaffer,
Drew M. Miles,
Thomas J. Peterson,
Hannah Marlowe,
James H. Tutt,
Benjamin D. Donovan,
Benedikt Menz,
Vadim Burwitz,
Gisela Hartner,
Ryan Allured,
Randall K. Smith,
Ramses Gunther,
Alex Yanson,
Giuseppe Vacanti,
Marcelo Ackermann
Abstract:
Future soft X-ray (10 - 50 Angstrom) spectroscopy missions require higher effective areas and resolutions to perform critical science that cannot be done by instruments on current missions. An X-ray grating spectrometer employing off-plane reflection gratings would be capable of meeting these performance criteria. Off-plane gratings with blazed groove facets operated in the Littrow mounting can be…
▽ More
Future soft X-ray (10 - 50 Angstrom) spectroscopy missions require higher effective areas and resolutions to perform critical science that cannot be done by instruments on current missions. An X-ray grating spectrometer employing off-plane reflection gratings would be capable of meeting these performance criteria. Off-plane gratings with blazed groove facets operated in the Littrow mounting can be used to achieve excellent throughput into orders achieving high resolutions. We have fabricated two off-plane gratings with blazed groove profiles via a technique which uses commonly available microfabrication processes, is easily scaled for mass production, and yields gratings customized for a given mission architecture. Both fabricated gratings were tested in the Littrow mounting at the Max-Planck-Institute for extraterrestrial Physics PANTER X-ray test facility to assess their performance. The line spread functions of diffracted orders were measured, and a maximum resolution of 800 $\pm$ 20 is reported. In addition, we also observe evidence of a `blaze' effect from measurements of relative efficiencies of the diffracted orders.
△ Less
Submitted 15 March, 2016;
originally announced March 2016.
-
Performance Testing of a Novel Off-plane Reflection Grating and Silicon Pore Optic Spectrograph at PANTER
Authors:
Hannah Marlowe,
Randall L. McEntaffer,
Ryan Allured,
Casey DeRoo,
Drew M. Miles,
Benjamin D. Donovan,
James H. Tutt,
Vadim Burwitz,
Benedikt Menz,
Gisela D. Hartner,
Randall K. Smith,
Ramses Günther,
Alex Yanson,
Giuseppe Vacanti,
Marcelo Ackermann
Abstract:
An X-ray spectrograph consisting of radially ruled off-plane reflection gratings and silicon pore optics was tested at the Max Planck Institute for extraterrestrial Physics PANTER X-ray test facility. The silicon pore optic (SPO) stack used is a test module for the Arcus small explorer mission, which will also feature aligned off-plane reflection gratings. This test is the first time two off-plane…
▽ More
An X-ray spectrograph consisting of radially ruled off-plane reflection gratings and silicon pore optics was tested at the Max Planck Institute for extraterrestrial Physics PANTER X-ray test facility. The silicon pore optic (SPO) stack used is a test module for the Arcus small explorer mission, which will also feature aligned off-plane reflection gratings. This test is the first time two off-plane gratings were actively aligned to each other and with a SPO to produce an overlapped spectrum. The gratings were aligned using an active alignment module which allows for the independent manipulation of subsequent gratings to a reference grating in three degrees of freedom using picomotor actuators which are controllable external to the test chamber. We report the line spread functions of the spectrograph and the actively aligned gratings, and plans for future development.
△ Less
Submitted 19 March, 2015;
originally announced March 2015.
-
HFPK 334: An unusual Supernova Remnant in the Small Magellanic Cloud
Authors:
E. J. Crawford,
M. D. Filipović,
R. L. McEntaffer,
T. Brantseg,
K. Heitritter,
Q. Roper,
F. Haberl,
D. Urosević
Abstract:
We present new Australia Telescope Compact Array (ATCA) radio-continuum and XMM-Newton/Chandra X-ray Observatory (CXO) observations of the unusual supernova remnant HFPK 334 in the Small Magellanic Cloud (SMC). The remnant follows a shell type morphology in the radio-continuum and has a size of $\sim$20~pc at the SMC distance. The X-ray morphology is similar, however, we detect a prominent point s…
▽ More
We present new Australia Telescope Compact Array (ATCA) radio-continuum and XMM-Newton/Chandra X-ray Observatory (CXO) observations of the unusual supernova remnant HFPK 334 in the Small Magellanic Cloud (SMC). The remnant follows a shell type morphology in the radio-continuum and has a size of $\sim$20~pc at the SMC distance. The X-ray morphology is similar, however, we detect a prominent point source close to the center of the SNR exhibiting a spectrum with a best fit powerlaw with a photon index of $Γ= 2.7 \pm 0.5$. This central point source is most likely a background object and cannot be directly associated with the remnant. The high temperature, nonequilibrium conditions in the diffuse region suggest that this gas has been recently shocked and point toward a younger SNR with an age of $\lesssim 1800$ years. With an average radio spectral index of $α=-0.59\pm0.09$ we find that an equipartition magnetic field for the remnant is $\sim$90~$μ$G, a value typical of younger SNRs in low-density environments. Also, we report detection of scattered radio polarisation across the remnant at 20~cm, with a peak fractional polarisation level of 25$\pm$5\%.
△ Less
Submitted 30 May, 2014;
originally announced May 2014.
-
A multi-wavelength look at the young plerionic supernova remnant 0540-69.3
Authors:
Thomas Brantseg,
Randall L. McEntaffer,
Luke M. Bozzetto,
Miroslav Filipovic,
Nolan Grieves
Abstract:
We present a study of the plerionic supernova remnant 0540-69.3 in the LMC in X-ray, radio, optical, and infrared. We find that the shell of 0540-69.3 is characterized in the X-ray by thermal nonequilibrium plasma with depleted Mg and Si abundances and a temperature of kT ~ 0.7 keV. This thermal emission is superimposed with synchrotron emission in several regions. Based on X-ray spectra and on mo…
▽ More
We present a study of the plerionic supernova remnant 0540-69.3 in the LMC in X-ray, radio, optical, and infrared. We find that the shell of 0540-69.3 is characterized in the X-ray by thermal nonequilibrium plasma with depleted Mg and Si abundances and a temperature of kT ~ 0.7 keV. This thermal emission is superimposed with synchrotron emission in several regions. Based on X-ray spectra and on morphological considerations in all surveyed wavebands, we conclude that the shell is expanding into a clumpy and highly inhomogeneous medium. In one region of the shell we find an overabundance of Ne, suggesting the presence of ejecta near the edge of the remnant. We also see evidence for reheating of material via a reverse shock originating from the interaction of the supernova blast wave with a particularly dense cloud in the surrounding medium. Finally, we perform the first detailed study of the "halo" region extending 1.2-2.2 pc from the central pulsar. We detect the presence of thermal and nonthermal spectral components but do not find evidence for mixing or ejecta. We conclude that the thermal component is not a counterpart to similar optical and infrared halos and that it is most likely due to the projection of shell material along the line of sight.
△ Less
Submitted 17 December, 2013;
originally announced December 2013.
-
Analytical Alignment Tolerances for Off-Plane Reflection Grating Spectroscopy
Authors:
Ryan Allured,
Randall L. McEntaffer
Abstract:
Future NASA X-ray Observatories will shed light on a variety of high-energy astrophysical phenomena. Off-plane reflection gratings can be used to provide high throughput and spectral resolution in the 0.3--1.5 keV band, allowing for unprecedented diagnostics of energetic astrophysical processes. A grating spectrometer consists of multiple aligned gratings intersecting the converging beam of a Wolt…
▽ More
Future NASA X-ray Observatories will shed light on a variety of high-energy astrophysical phenomena. Off-plane reflection gratings can be used to provide high throughput and spectral resolution in the 0.3--1.5 keV band, allowing for unprecedented diagnostics of energetic astrophysical processes. A grating spectrometer consists of multiple aligned gratings intersecting the converging beam of a Wolter-I telescope. Each grating will be aligned such that the diffracted spectra overlap at the focal plane. Misalignments will degrade both spectral resolution and effective area. In this paper we present an analytical formulation of alignment tolerances that define grating orientations in all six degrees of freedom. We verify our analytical results with raytrace simulations to fully explore the alignment parameter space. We also investigate the effect of misalignments on diffraction efficiency.
△ Less
Submitted 24 August, 2013;
originally announced August 2013.
-
First results from a next-generation off-plane X-ray diffraction grating
Authors:
Randall McEntaffer,
Casey DeRoo,
Ted Schultz,
Brennan Gantner,
James Tutt,
Andrew Holland,
Stephen O'Dell,
Jessica Gaskin,
Jeffrey Kolodziejczak,
William W. Zhang,
Kai-Wing Chan,
Michael Biskach,
Ryan McClelland,
Dmitri Iazikov,
Xinpeng Wang,
Larry Koecher
Abstract:
Future NASA X-ray spectroscopy missions will require high throughput, high resolution grating spectrometers. Off-plane reflection gratings are capable of meeting the performance requirements needed to realize the scientific goals of these missions. We have identified a novel grating fabrication method that utilizes common lithographic and microfabrication techniques to produce the high fidelity gr…
▽ More
Future NASA X-ray spectroscopy missions will require high throughput, high resolution grating spectrometers. Off-plane reflection gratings are capable of meeting the performance requirements needed to realize the scientific goals of these missions. We have identified a novel grating fabrication method that utilizes common lithographic and microfabrication techniques to produce the high fidelity groove profile necessary to achieve this performance. Application of this process has produced an initial pre-master that exhibits a radial (variable line spacing along the groove dimension), high density (>6000 grooves/mm), laminar profile. This pre-master has been tested for diffraction efficiency at the BESSY II synchrotron light facility and diffracts up to 55% of incident light into usable spectral orders. Furthermore, tests of spectral resolving power show that these gratings are capable of obtaining resolutions well above 1300 ($λ/Δλ$) with limitations due to the test apparatus, not the gratings. Obtaining these results has provided confidence that this fabrication process is capable of producing off-plane reflection gratings for the next generation of X-ray observatories.
△ Less
Submitted 23 January, 2013;
originally announced January 2013.
-
X-ray Emission from the Galactic Supernova Remnant G272.2-3.2
Authors:
Randall L. McEntaffer,
Nolan Grieves,
Thomas Brantseg
Abstract:
We present analysis of Chandra X-ray Observatory data detailing a galactic supernova remnant, G272.2-3.2. A clear shell of emission has been resolved for the first time as a series of filaments and knots around the entire rim of the remnant. Spectral analysis of these features show that they are consistent with shock heating of interstellar material in a clumpy medium. Spatially separated from thi…
▽ More
We present analysis of Chandra X-ray Observatory data detailing a galactic supernova remnant, G272.2-3.2. A clear shell of emission has been resolved for the first time as a series of filaments and knots around the entire rim of the remnant. Spectral analysis of these features show that they are consistent with shock heating of interstellar material in a clumpy medium. Spatially separated from this shell we see a central diffuse region dominated by harder, hotter emission. Spatial spectroscopy shows a clear enhancement of metals consistent with a Type Ia explosion, namely S, Si, and Fe. We find no clear evidence for a compact object or pulsar wind nebula and argue for a Type Ia origin. Consideration of the ionization timescales suggest an age of 8700 years for G272.2-3.2.
△ Less
Submitted 4 January, 2013;
originally announced January 2013.
-
SNR 0453-68.5: An Asymmetric Remnant and its Plerion in the Large Magellanic Cloud
Authors:
Randall L. McEntaffer,
Thomas Brantseg,
Morgan Presley
Abstract:
We present a comprehensive study of the X-ray emission from SNR 0453-68.5 in the Large Magellanic Cloud (LMC) as seen from the \textit{Chandra} X-ray Observatory. This object is in a class of composite remnants that exhibit a shell of emission surrounding a central plerion, more commonly known as a pulsar wind nebula (PWN). This is one of only five remnants in the LMC with an identified PWN. We fi…
▽ More
We present a comprehensive study of the X-ray emission from SNR 0453-68.5 in the Large Magellanic Cloud (LMC) as seen from the \textit{Chandra} X-ray Observatory. This object is in a class of composite remnants that exhibit a shell of emission surrounding a central plerion, more commonly known as a pulsar wind nebula (PWN). This is one of only five remnants in the LMC with an identified PWN. We find that the shell of emission is not ejecta dominated, but rather due to shocked ISM that has been swept up by the supernova blast wave or located in a precursor cavity wall. This is supported by the morphology of the local molecular cloud as seen with the \textit{Spitzer} Space Telescope. The spectral properties are consistent with a middle-aged remnant $>$17000 years old. A point source detected within the central knot is determined to be the pulsar powering the synchrotron emission of the PWN. Spectral fits show the nebula is well characterized by a power law with photon index $Γ=2.0$. This index is constant over a spatial scale of 0.4-1.2 pc, which is inconsistent with younger PWN containing remnants such as the Crab Nebula and SNR 0540-69.3. These fits also contain significant contributions from an ejecta dominated thermal plasma which we interpret as evidence of mixing during an evolved interaction of the PWN with the reverse shock of the SNR. We observe no evidence that the central pulsar contains a significant velocity transverse to the line of sight and argue that despite the asymmetric surface brightness distribution the SN explosion giving birth to this remnant may have been quite symmetric.
△ Less
Submitted 25 July, 2012; v1 submitted 8 February, 2012;
originally announced February 2012.
-
A Suborbital Payload for Soft X-ray Spectroscopy of Extended Sources
Authors:
Phillip H. H. Oakley,
Randall L. McEntaffer,
Webster Cash
Abstract:
We present a suborbital rocket payload capable of performing soft X-ray spectroscopy on extended sources. The payload can reach resolutions of ~100(lambda/dlambda) over sources as large as 3.25 degrees in diameter in the 17-107 angstrom bandpass. This permits analysis of the overall energy balance of nearby supernova remnants and the detailed nature of the diffuse soft X-ray background. The main c…
▽ More
We present a suborbital rocket payload capable of performing soft X-ray spectroscopy on extended sources. The payload can reach resolutions of ~100(lambda/dlambda) over sources as large as 3.25 degrees in diameter in the 17-107 angstrom bandpass. This permits analysis of the overall energy balance of nearby supernova remnants and the detailed nature of the diffuse soft X-ray background. The main components of the instrument are: wire grid collimators, off-plane grating arrays and gaseous electron multiplier detectors. This payload is adaptable to longer duration orbital rockets given its comparatively simple pointing and telemetry requirements and an abundance of potential science targets.
△ Less
Submitted 18 April, 2011;
originally announced April 2011.
-
Chandra Imaging and Spectroscopy of the Eastern XA Region of the Cygnus Loop Supernova Remnant
Authors:
Randall L. McEntaffer,
Thomas Brantseg
Abstract:
The XA region of the Cygnus Loop is a bright knot of X-ray emission on the eastern edge of the supernova remnant resulting from the interaction of the supernova blast wave with density enhancements at the edge of a precursor formed cavity. To study the nature and origin of the X-ray emission we use high spatial resolution images from Chandra. Our goal is to probe the density of various spectral ex…
▽ More
The XA region of the Cygnus Loop is a bright knot of X-ray emission on the eastern edge of the supernova remnant resulting from the interaction of the supernova blast wave with density enhancements at the edge of a precursor formed cavity. To study the nature and origin of the X-ray emission we use high spatial resolution images from Chandra. Our goal is to probe the density of various spectral extraction regions to form a picture of the cavity wall and characterize the interaction between this supernova and the local interstellar medium. We find that a series of regions along the edge of the X-ray emission appears to trace out the location of the cavity wall. The best fit plasma models result in two temperature component equilibrium models for each region. The low temperature components have densities that are an order of magnitude higher than the high temperature components. The high density plasma may exist in the cavity wall where it equilibrates rapidly and cools efficiently. The low density plasma is interior to the enhancement and heated further by a reverse shock from the wall. Calculations of shock velocities and timescales since shock heating are consistent with this interpretation. Furthermore, we find a bright knot of emission indicative of a discrete interaction of the blast wave with a high density cloud in the cavity wall with a size scale ~0.1 pc. Aside from this, other extractions made interior to the X-ray edge are confused by line of sight projection of various components. Some of these regions show evidence of detecting the cavity wall but their location makes the interpretation difficult. In general, the softer plasmas are well fit at temperatures kT~0.11 keV, with harder plasmas at temperatures of kT~0.27 keV. All regions display consistent metal depletions most notably in N, O, and Ne at an average of 0.54, 0.55, and 0.36 times solar.
△ Less
Submitted 29 March, 2011;
originally announced March 2011.
-
Soft X-ray Spectroscopy of the Cygnus Loop Supernova Remnant
Authors:
Randall L. McEntaffer,
Webster Cash
Abstract:
The Cygnus X-ray Emission Spectroscopic Survey (CyXESS) sounding rocket payload was launched from White Sands Missile Range on 2006 November 20 and obtained a high resolution spectrum of the Cygnus Loop supernova remnant in the soft X-rays. The novel X-ray spectrograph incorporated a wire-grid collimator feeding an array of gratings in the extreme off-plane mount which ultimately dispersed the s…
▽ More
The Cygnus X-ray Emission Spectroscopic Survey (CyXESS) sounding rocket payload was launched from White Sands Missile Range on 2006 November 20 and obtained a high resolution spectrum of the Cygnus Loop supernova remnant in the soft X-rays. The novel X-ray spectrograph incorporated a wire-grid collimator feeding an array of gratings in the extreme off-plane mount which ultimately dispersed the spectrum onto Gaseous Electron Multiplier (GEM) detectors. This instrument recorded 65 seconds of usable data between 43-49.5 Åin two prominent features. The first feature near 45 Åis dominated by the He-like triplet of \ion{O}{7} in second order with contributions from \ion{Mg}{10} and \ion{Si}{9}-\ion{Si}{12} in first order, while the second feature near 47.5 Åis first order \ion{S}{9} and \ion{S}{10}. Fits to the spectra give an equilibrium plasma at $\log(T)=6.2$ ($kT_e=0.14$ keV) and near cosmic abundances. This is consistent with previous observations, which demonstrated that the soft x-ray emission from the Cygnus Loop is dominated by interactions between the initial blast wave with the walls of a precursor formed cavity surrounding the Cygnus Loop and that this interaction can be described using equilibrium conditions.
△ Less
Submitted 29 January, 2008;
originally announced January 2008.
-
The Relationship Between Baryons and Dark Matter in Extended Galaxy Halos
Authors:
M. E. Putman,
J. L. Rosenberg,
J. T. Stocke,
R. McEntaffer
Abstract:
The relationship between gas-rich galaxies and Ly-alpha absorbers is addressed in this paper in the context of the baryonic content of galaxy halos. Deep Arecibo HI observations are presented of two gas-rich spiral galaxies within 125 kpc projected distance of a Ly-alpha absorber at a similar velocity. The galaxies investigated are close to edge-on and the absorbers lie almost along their major…
▽ More
The relationship between gas-rich galaxies and Ly-alpha absorbers is addressed in this paper in the context of the baryonic content of galaxy halos. Deep Arecibo HI observations are presented of two gas-rich spiral galaxies within 125 kpc projected distance of a Ly-alpha absorber at a similar velocity. The galaxies investigated are close to edge-on and the absorbers lie almost along their major axes, allowing for a comparison of the Ly-alpha absorber velocities with galactic rotation. This comparison is used to examine whether the absorbers are diffuse gas rotating with the galaxies' halos, outflow material from the galaxies, or intergalactic gas in the low redshift cosmic web. The results indicate that if the gas resides in the galaxies' halos it is not rotating with the system and possibly counter-rotating. In addition, simple geometry indicates the gas was not ejected from the galaxies and there are no gas-rich satellites detected down to 3.6 - 7.5 x 10^6 Msun, or remnants of satellites to 5-6 x 10^{18} cm^{-2}. The gas could potentially be infalling from large radii, but the velocities and distances are rather high compared to the high velocity clouds around the Milky Way. The most likely explanation is the galaxies and absorbers are not directly associated, despite the vicinity of the spiral galaxies to the absorbers (58-77 kpc from the HI edge). The spiral galaxies reside in a filament of intergalactic gas, and the gas detected by the absorber has not yet come into equilibrium with the galaxy. These results also indicate that the massive, extended dark matter halos of spiral galaxies do not commonly have an associated diffuse baryonic component at large radii.
△ Less
Submitted 11 October, 2005;
originally announced October 2005.
