-
Progress on FORS-Up: the first instrument using ELT technologies
Authors:
H. M. J. Boffin,
V. Baldini,
S. Bertocco,
G. Calderone,
R. Cirami,
R. D. Conzelmann,
I. Coretti,
C. Cumani,
D. Del Valle,
F. Derie,
P. A. Fuerte Rodríguez,
P. Gutierrez Cheetham,
J. Kosmalski,
A. R. Manescau,
P. Di Marcantonio,
A. Modigliani,
S. Moehler,
C. Moins,
D. Popovic,
M. Porru,
J. Reyes,
R. Siebenmorgen,
V. Strazzullo,
A. Sulich
Abstract:
ESO is in the process of upgrading one of the two FORS (FOcal Reducer/low dispersion Spectrograph) instruments - a multi-mode (imaging, polarimetry, long-slit, and multi-object spectroscopy) optical instrument mounted on the Cassegrain focus of Unit Telescope 1 of ESO's Very Large Telescope. FORS1 was moved from Chile to Trieste, and is undergoing complete refurbishment, including the exchange of…
▽ More
ESO is in the process of upgrading one of the two FORS (FOcal Reducer/low dispersion Spectrograph) instruments - a multi-mode (imaging, polarimetry, long-slit, and multi-object spectroscopy) optical instrument mounted on the Cassegrain focus of Unit Telescope 1 of ESO's Very Large Telescope. FORS1 was moved from Chile to Trieste, and is undergoing complete refurbishment, including the exchange of all motorised parts. In addition, new software is developed, based on the Extremely Large Telescope Instrument Control Software Framework, as the upgraded FORS1 will be the first instrument in operations to use this framework. The new Teledyne e2V CCD has now been procured and is undergoing testing with the New Generation Controller at ESO. In addition, a new set of grisms have been developed, and a new set of filters will be purchased. A new internal calibration unit has been designed, making the operations more efficient.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Adaptive Data Reduction Workflows for Astronomy -- The ESO Data Processing System (EDPS)
Authors:
Wolfram Freudling,
Stefano Zampieri,
Lodovico Coccato,
Stanislaw Podgorski,
Martino Romaniello,
Andrea Modigliani,
John Pritchard
Abstract:
Astronomical data reduction is usually done with processing pipelines that consist of a series of individual processing steps that can be executed stand-alone. These processing steps are then strung together into workflows and fed with data to address a particular processing goal. In this paper, we propose a data processing system that automatically derives processing workflows for different use c…
▽ More
Astronomical data reduction is usually done with processing pipelines that consist of a series of individual processing steps that can be executed stand-alone. These processing steps are then strung together into workflows and fed with data to address a particular processing goal. In this paper, we propose a data processing system that automatically derives processing workflows for different use cases from a single specification of a cascade of processing steps. The system works by using formalized descriptions of data processing pipelines that specify the input and output of each processing step. Inputs can be existing data or the output of a previous step. Rules to select the most appropriate input data are directly attached to the description. A version of the proposed system has been implemented as the ESO Data Processing System (EDPS) in the Python language. The specification of processing cascades and data organisation rules use a restrictive set of Python classes, attributes and functions. The EDPS implementation of the proposed system was used to demonstrate that it is possible to automatically derive from a single specification of a pipeline processing cascade the workflows that the European Southern Observatory uses for quality control, archive production, and specialized science reduction. The EDPS will be used to replace all data reduction systems using different workflow specifications that are currently used at the European Southern Observatory.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
The Enhanced Resolution Imager and Spectrograph for the VLT
Authors:
R. Davies,
O. Absil,
G. Agapito,
A. Agudo Berbel,
A. Baruffolo,
V. Biliotti,
M. Bonaglia,
M. Bonse,
R. Briguglio,
P. Campana,
Y. Cao,
L. Carbonaro,
A. Cortes,
G. Cresci,
Y. Dallilar,
F. Dannert,
R. J. De Rosa,
M. Deysenroth,
I. Di Antonio,
A. Di Cianno,
G. Di Rico,
D. Doelman,
M. Dolci,
R. Dorn,
F. Eisenhauer
, et al. (59 additional authors not shown)
Abstract:
ERIS, the Enhanced Resolution Imager and Spectrograph, is an instrument that both extends and enhances the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It replaces two instruments that were being maintained beyond their operational lifetimes, combines their functionality on a single focus, provides a new wavefront sensing module for natural and laser guide stars…
▽ More
ERIS, the Enhanced Resolution Imager and Spectrograph, is an instrument that both extends and enhances the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It replaces two instruments that were being maintained beyond their operational lifetimes, combines their functionality on a single focus, provides a new wavefront sensing module for natural and laser guide stars that makes use of the Adaptive Optics Facility, and considerably improves on their performance. The observational modes ERIS provides are integral field spectroscopy at 1-2.5 μm, imaging at 1-5 μm with several options for high contrast imaging, and longslit spectroscopy at 3-4 μm, The instrument is installed at the Cassegrain focus of UT4 at the VLT and, following its commissioning during 2022, has been made available to the community.
△ Less
Submitted 26 April, 2023; v1 submitted 5 April, 2023;
originally announced April 2023.
-
CUBES: a UV spectrograph for the future
Authors:
S. Covino,
S. Cristiani,
J. M. Alcala',
S. H. P. Alencar,
S. A. Balashev,
B. Barbuy,
N. Bastian,
U. Battino,
L. Bissell,
P. Bristow,
A. Calcines,
G. Calderone,
P. Cambianica,
R. Carini,
B. Carter,
S. Cassisi,
B. V. Castilho,
G. Cescutti,
N. Christlieb,
R. Cirami,
R. Conzelmann,
I. Coretti,
R. Cooke,
G. Cremonese,
K. Cunha
, et al. (64 additional authors not shown)
Abstract:
In spite of the advent of extremely large telescopes in the UV/optical/NIR range, the current generation of 8-10m facilities is likely to remain competitive at ground-UV wavelengths for the foreseeable future. The Cassegrain U-Band Efficient Spectrograph (CUBES) has been designed to provide high-efficiency (>40%) observations in the near UV (305-400 nm requirement, 300-420 nm goal) at a spectral r…
▽ More
In spite of the advent of extremely large telescopes in the UV/optical/NIR range, the current generation of 8-10m facilities is likely to remain competitive at ground-UV wavelengths for the foreseeable future. The Cassegrain U-Band Efficient Spectrograph (CUBES) has been designed to provide high-efficiency (>40%) observations in the near UV (305-400 nm requirement, 300-420 nm goal) at a spectral resolving power of R>20,000, although a lower-resolution, sky-limited mode of R ~ 7,000 is also planned.
CUBES will offer new possibilities in many fields of astrophysics, providing access to key lines of stellar spectra: a tremendous diversity of iron-peak and heavy elements, lighter elements (in particular Beryllium) and light-element molecules (CO, CN, OH), as well as Balmer lines and the Balmer jump (particularly important for young stellar objects). The UV range is also critical in extragalactic studies: the circumgalactic medium of distant galaxies, the contribution of different types of sources to the cosmic UV background, the measurement of H2 and primordial Deuterium in a regime of relatively transparent intergalactic medium, and follow-up of explosive transients.
The CUBES project completed a Phase A conceptual design in June 2021 and has now entered the Phase B dedicated to detailed design and construction. First science operations are planned for 2028. In this paper, we briefly describe the CUBES project development and goals, the main science cases, the instrument design and the project organization and management.
△ Less
Submitted 24 December, 2022;
originally announced December 2022.
-
Chemical Composition of a Palomar 12 Blue Straggler
Authors:
L. Pasquini,
P. Bonifacio,
L. Pulone,
A. Modigliani,
E. Brocato,
L. Sbordone,
S. Randich,
G. Cupani
Abstract:
With the equivalent area of a 16m telescope, ESPRESSO in 4UT mode allows to inaugurate high resolution spectroscopy for solar-type stars belonging to extragalactic globular clusters. We determine the chemical composition of an extragalactic blue straggler. The star has a G magnitude of 19.01 and belongs to the globular cluster Pal12, that is associated to the Sagittarius dwarf galaxy. Abundances a…
▽ More
With the equivalent area of a 16m telescope, ESPRESSO in 4UT mode allows to inaugurate high resolution spectroscopy for solar-type stars belonging to extragalactic globular clusters. We determine the chemical composition of an extragalactic blue straggler. The star has a G magnitude of 19.01 and belongs to the globular cluster Pal12, that is associated to the Sagittarius dwarf galaxy. Abundances are computed by using high resolution spectroscopy and LTE analysis. Two 50 minutes ESPRESSO spectra, co-added, provide a Signal to Noise Ratio of 25 with a resolving power R=70000. This allows us to measure with good precision abundance of several (13) elements. Li could help to distinguish between formation models of Blue Stragglers; we are able to set a 3 sigma upper limit of Li=3.1, which is still too high to discriminate between competing models. The abundances we retrieve for the BS are compatible with those of giant stars of Pal 12 published in literature, re-analyzed by us using the same procedure and line list. Small differences are present, that can be ascribed to NLTE effects, but for Mg the BS shows a large under-abundance. The most likely explanation is that the BS atmosphere is dominated by gas processed through the Mg-Al cycle, but we have no suitable Al or Na lines to confirm this hypothesis. We show that ESPRESSO with 4UT can be used to derive precise abundances for solar-type stars fainter than magnitude 19. At these magnitudes a proper sky subtraction is needed and in crowded field the targets must be chosen with outmost care, to avoid contamination of the sky fibre from nearby stars.
△ Less
Submitted 28 March, 2022;
originally announced March 2022.
-
Fundamental physics with Espresso: Towards an accurate wavelength calibration for a precision test of the fine-structure constant
Authors:
Tobias M. Schmidt,
Paolo Molaro,
Michael T. Murphy,
Christophe Lovis,
Guido Cupani,
Stefano Cristiani,
Francesco A. Pepe,
Rafael Rebolo,
Nuno C. Santos,
Manuel Abreu,
Vardan Adibekyan,
Yann Alibert,
Matteo Aliverti,
Romain Allart,
Carlos Allende Prieto,
David Alves,
Veronica Baldini,
Christopher Broeg,
Alexandre Cabral,
Giorgio Calderone,
Roberto Cirami,
João Coelho,
Igor Coretti,
Valentina D'Odorico,
Paolo Di Marcantonio
, et al. (34 additional authors not shown)
Abstract:
Observations of metal absorption systems in the spectra of distant quasars allow to constrain a possible variation of the fine-structure constant throughout the history of the Universe. Such a test poses utmost demands on the wavelength accuracy and previous studies were limited by systematics in the spectrograph wavelength calibration. A substantial advance in the field is therefore expected from…
▽ More
Observations of metal absorption systems in the spectra of distant quasars allow to constrain a possible variation of the fine-structure constant throughout the history of the Universe. Such a test poses utmost demands on the wavelength accuracy and previous studies were limited by systematics in the spectrograph wavelength calibration. A substantial advance in the field is therefore expected from the new ultra-stable high-resolution spectrograph Espresso, recently installed at the VLT. In preparation of the fundamental physics related part of the Espresso GTO program, we present a thorough assessment of the Espresso wavelength accuracy and identify possible systematics at each of the different steps involved in the wavelength calibration process. Most importantly, we compare the default wavelength solution, based on the combination of Thorium-Argon arc lamp spectra and a Fabry-Pérot interferometer, to the fully independent calibration obtained from a laser frequency comb. We find wavelength-dependent discrepancies of up to 24m/s. This substantially exceeds the photon noise and highlights the presence of different sources of systematics, which we characterize in detail as part of this study. Nevertheless, our study demonstrates the outstanding accuracy of Espresso with respect to previously used spectrographs and we show that constraints of a relative change of the fine-structure constant at the $10^{-6}$ level can be obtained with Espresso without being limited by wavelength calibration systematics.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
ESPRESSO high resolution transmission spectroscopy of WASP-76b
Authors:
H. M. Tabernero,
M. R. Zapatero Osorio,
R. Allart,
F. Borsa,
N. Casasayas-Barris,
O. Demangeon,
D. Ehrenreich,
J. Lillo-Box,
C. Lovis,
E. Pallé,
S. G. Sousa,
R. Rebolo,
N. C. Santos,
F. Pepe,
S. Cristiani,
V. Adibekyan,
C. Allende Prieto,
Yann Alibert,
S. C. C. Barros,
F. Bouchy,
V. Bourrier,
V. D'Odorico,
X. Dumusque,
J. P. Faria,
P. Figueira
, et al. (66 additional authors not shown)
Abstract:
Aims. We report on ESPRESSO high-resolution transmission spectroscopic observations of two primary transits of the highly-irradiated, ultra-hot Jupiter-size planet WASP-76b. We investigate the presence of several key atomic and molecular features of interest that may reveal the atmospheric properties of the planet. Methods. We extracted two transmission spectra of WASP-76b with R approx 140,000 us…
▽ More
Aims. We report on ESPRESSO high-resolution transmission spectroscopic observations of two primary transits of the highly-irradiated, ultra-hot Jupiter-size planet WASP-76b. We investigate the presence of several key atomic and molecular features of interest that may reveal the atmospheric properties of the planet. Methods. We extracted two transmission spectra of WASP-76b with R approx 140,000 using a procedure that allowed us to process the full ESPRESSO wavelength range (3800-7880 A) simultaneously. We observed that at a high signal-to-noise ratio, the continuum of ESPRESSO spectra shows wiggles that are likely caused by an interference pattern outside the spectrograph. To search for the planetary features, we visually analysed the extracted transmission spectra and cross-correlated the observations against theoretical spectra of different atomic and molecular species. Results. The following atomic features are detected: Li I, Na I, Mg I, Ca II, Mn I, K I, and Fe I. All are detected with a confidence level between 9.2 sigma (Na I) and 2.8 sigma (Mg I). We did not detect the following species: Ti I, Cr I, Ni I, TiO, VO, and ZrO. We impose the following 1 sigma upper limits on their detectability: 60, 77, 122, 6, 8, and 8 ppm, respectively. Conclusions. We report the detection of Li I on WASP-76b for the first time. In addition, we found the presence of Na I and Fe I as previously reported in the literature. We show that the procedure employed in this work can detect features down to the level of ~ 0.1 % in the transmission spectrum and ~ 10 ppm by means of a cross-correlation method. We discuss the presence of neutral and singly ionised features in the atmosphere of WASP-76b.
△ Less
Submitted 24 November, 2020;
originally announced November 2020.
-
ESPRESSO@VLT -- On-sky performance and first results
Authors:
F. Pepe,
S. Cristiani,
R. Rebolo,
N. C. Santos,
H. Dekker,
A. Cabral,
P. Di Marcantonio,
P. Figueira,
G. Lo Curto,
C. Lovis,
M. Mayor,
D. Mégevand,
P. Molaro,
M. Riva,
M. R. Zapatero Osorio,
M. Amate,
A. Manescau,
L. Pasquini,
F. M. Zerbi,
V. Adibekyan,
M. Abreu,
M. Affolter,
Y. Alibert,
M. Aliverti,
R. Allart
, et al. (75 additional authors not shown)
Abstract:
ESPRESSO is the new high-resolution spectrograph of ESO's Very-Large Telescope (VLT). It was designed for ultra-high radial-velocity precision and extreme spectral fidelity with the aim of performing exoplanet research and fundamental astrophysical experiments with unprecedented precision and accuracy. It is able to observe with any of the four Unit Telescopes (UT) of the VLT at a spectral resolvi…
▽ More
ESPRESSO is the new high-resolution spectrograph of ESO's Very-Large Telescope (VLT). It was designed for ultra-high radial-velocity precision and extreme spectral fidelity with the aim of performing exoplanet research and fundamental astrophysical experiments with unprecedented precision and accuracy. It is able to observe with any of the four Unit Telescopes (UT) of the VLT at a spectral resolving power of 140,000 or 190,000 over the 378.2 to 788.7 nm wavelength range, or with all UTs together, turning the VLT into a 16-m diameter equivalent telescope in terms of collecting area, while still providing a resolving power of 70,000. We provide a general description of the ESPRESSO instrument, report on the actual on-sky performance, and present our Guaranteed-Time Observation (GTO) program with its first results. ESPRESSO was installed on the Paranal Observatory in fall 2017. Commissioning (on-sky testing) was conducted between December 2017 and September 2018. The instrument saw its official start of operations on October 1st, 2018, but improvements to the instrument and re-commissioning runs were conducted until July 2019. The measured overall optical throughput of ESPRESSO at 550 nm and a seeing of 0.65 arcsec exceeds the 10% mark under nominal astro-climatic conditions. We demonstrate a radial-velocity precision of better than 25 cm/s during one night and 50 cm/s over several months. These values being limited by photon noise and stellar jitter show that the performanceis compatible with an instrumental precision of 10 cm/s. No difference has been measured across the UTs neither in throughput nor RV precision. The combination of the large collecting telescope area with the efficiency and the exquisite spectral fidelity of ESPRESSO opens a new parameter space in RV measurements, the study of planetary atmospheres, fundamental constants, stellar characterisation and many other fields.
△ Less
Submitted 1 October, 2020;
originally announced October 2020.
-
A precise architecture characterization of the $π$ Men planetary system
Authors:
M. Damasso,
A. Sozzetti,
C. Lovis,
S. C. C. Barros,
S. G. Sousa,
O. D. S. Demangeon,
J. P. Faria,
J. Lillo-Box,
S. Cristiani,
F. Pepe,
R. Rebolo,
N. C. Santos,
M. R. Zapatero Osorio,
J. I. González Hernández,
M. Amate,
L. Pasquini,
F. M. Zerbi,
V. Adibekyan,
M. Abreu,
M. Affolter,
Y. Alibert,
M. Aliverti,
R. Allart,
C. Allende Prieto,
D. Álvarez
, et al. (75 additional authors not shown)
Abstract:
The bright star $π$ Men was chosen as the first target for a radial velocity follow-up to test the performance of ESPRESSO, the new high-resolution spectrograph at the ESO's Very-Large Telescope (VLT). The star hosts a multi-planet system (a transiting 4 M$_\oplus$ planet at $\sim$0.07 au, and a sub-stellar companion on a $\sim$2100-day eccentric orbit) which is particularly appealing for a precis…
▽ More
The bright star $π$ Men was chosen as the first target for a radial velocity follow-up to test the performance of ESPRESSO, the new high-resolution spectrograph at the ESO's Very-Large Telescope (VLT). The star hosts a multi-planet system (a transiting 4 M$_\oplus$ planet at $\sim$0.07 au, and a sub-stellar companion on a $\sim$2100-day eccentric orbit) which is particularly appealing for a precise multi-technique characterization. With the new ESPRESSO observations, that cover a time span of 200 days, we aim to improve the precision and accuracy of the planet parameters and search for additional low-mass companions. We also take advantage of new photometric transits of $π$ Men c observed by TESS over a time span that overlaps with that of the ESPRESSO follow-up campaign. We analyse the enlarged spectroscopic and photometric datasets and compare the results to those in the literature. We further characterize the system by means of absolute astrometry with Hipparcos and Gaia. We used the spectra of ESPRESSO for an independent determination of the stellar fundamental parameters. We present a precise characterization of the planetary system around $π$ Men. The ESPRESSO radial velocities alone (with typical uncertainty of 10 cm/s) allow for a precise retrieval of the Doppler signal induced by $π$ Men c. The residuals show an RMS of 1.2 m/s, and we can exclude companions with a minimum mass less than $\sim$2 M$_\oplus$ within the orbit of $π$ Men c). We improve the ephemeris of $π$ Men c using 18 additional TESS transits, and in combination with the astrometric measurements, we determine the inclination of the orbital plane of $π$ Men b with high precision ($i_{b}=45.8^{+1.4}_{-1.1}$ deg). This leads to the precise measurement of its absolute mass $m_{b}=14.1^{+0.5}_{-0.4}$ M$_{Jup}$, and shows that the planetary orbital planes are highly misaligned.
△ Less
Submitted 13 July, 2020;
originally announced July 2020.
-
Characterization of the K2-38 planetary system. Unraveling one of the densest planets known to date
Authors:
B. Toledo-Padrón,
C. Lovis,
A. Suárez Mascareño,
S. C. C. Barros,
J. I. González Hernández,
A. Sozzetti,
F. Bouchy,
M. R. Zapatero Osorio,
R. Rebolo,
S. Cristiani,
F. A. Pepe,
N. C. Santos,
S. G. Sousa,
H. M. Tabernero,
J. Lillo-Box,
D. Bossini,
V. Adibekyan,
R. Allart,
M. Damasso,
V. D'Odorico,
P. Figueira,
B. Lavie,
G. Lo Curto,
A. Mehner,
G. Micela
, et al. (68 additional authors not shown)
Abstract:
We characterized the transiting planetary system orbiting the G2V star K2-38 using the new-generation echelle spectrograph ESPRESSO. We carried out a photometric analysis of the available K2 photometric light curve of this star to measure the radius of its two known planets. Using 43 ESPRESSO high-precision radial velocity measurements taken over the course of 8 months along with the 14 previously…
▽ More
We characterized the transiting planetary system orbiting the G2V star K2-38 using the new-generation echelle spectrograph ESPRESSO. We carried out a photometric analysis of the available K2 photometric light curve of this star to measure the radius of its two known planets. Using 43 ESPRESSO high-precision radial velocity measurements taken over the course of 8 months along with the 14 previously published HIRES RV measurements, we modeled the orbits of the two planets through a MCMC analysis, significantly improving their mass measurements. Using ESPRESSO spectra, we derived the stellar parameters, $T_{\rm eff}$=5731$\pm$66, $\log g$=4.38$\pm$0.11~dex, and $[Fe/H]$=0.26$\pm$0.05~dex, and thus the mass and radius of K2-38, $M_{\star}$=1.03 $^{+0.04}_{-0.02}$~M$_{\oplus}$ and $R_{\star}$=1.06 $^{+0.09}_{-0.06}$~R$_{\oplus}$. We determine new values for the planetary properties of both planets. We characterize K2-38b as a super-Earth with $R_{\rm P}$=1.54$\pm$0.14~R$_{\rm \oplus}$ and $M_{\rm p}$=7.3$^{+1.1}_{-1.0}$~M$_{\oplus}$, and K2-38c as a sub-Neptune with $R_{\rm P}$=2.29$\pm$0.26~R$_{\rm \oplus}$ and $M_{\rm p}$=8.3$^{+1.3}_{-1.3}$~M$_{\oplus}$. We derived a mean density of $ρ_{\rm p}$=11.0$^{+4.1}_{-2.8}$~g cm$^{-3}$ for K2-38b and $ρ_{\rm p}$=3.8$^{+1.8}_{-1.1}$~g~cm$^{-3}$ for K2-38c, confirming K2-38b as one of the densest planets known to date. The best description for the composition of K2-38b comes from an iron-rich Mercury-like model, while K2-38c is better described by a rocky model with a H2 envelope. The maximum collision stripping boundary shows how giant impacts could be the cause for the high density of K2-38b. The irradiation received by each planet places them on opposite sides of the radius valley. We find evidence of a long-period signal in the radial velocity time-series whose origin could be linked to a 0.25-3~M$_{\rm J}$ planet or stellar activity.
△ Less
Submitted 1 October, 2020; v1 submitted 2 July, 2020;
originally announced July 2020.
-
Revisiting Proxima with ESPRESSO
Authors:
A. Suárez Mascareño,
J. P. Faria,
P. Figueira,
C. Lovis,
M. Damasso,
J. I. González Hernández,
R. Rebolo,
S. Cristiano,
F. Pepe,
N. C. Santos,
M. R. Zapatero Osorio,
V. Adibekyan,
S. Hojjatpanah,
A. Sozzetti,
F. Murgas,
M. Abreo,
M. Affolter,
Y. Alibert,
M. Aliverti,
R. Allart,
C. Allende Prieto,
D. Alves,
M. Amate,
G. Avila,
V. Baldini
, et al. (66 additional authors not shown)
Abstract:
We aim to confirm the presence of Proxima b using independent measurements obtained with the new ESPRESSO spectrograph, and refine the planetary parameters taking advantage of its improved precision. We analysed 63 spectroscopic ESPRESSO observations of Proxima taken during 2019. We obtained radial velocity measurements with a typical radial velocity photon noise of 26 cm/s. We ran a joint MCMC an…
▽ More
We aim to confirm the presence of Proxima b using independent measurements obtained with the new ESPRESSO spectrograph, and refine the planetary parameters taking advantage of its improved precision. We analysed 63 spectroscopic ESPRESSO observations of Proxima taken during 2019. We obtained radial velocity measurements with a typical radial velocity photon noise of 26 cm/s. We ran a joint MCMC analysis on the time series of the radial velocity and full-width half maximum of the cross-correlation function to model the planetary and stellar signals present in the data, applying Gaussian process regression to deal with stellar activity. We confirm the presence of Proxima b independently in the ESPRESSO data. The ESPRESSO data on its own shows Proxima b at a period of 11.218 $\pm$ 0.029 days, with a minimum mass of 1.29 $\pm$ 0.13 Me. In the combined dataset we measure a period of 11.18427 $\pm$ 0.00070 days with a minimum mass of 1.173 $\pm$ 0.086 Me. We find no evidence of stellar activity as a potential cause for the 11.2 days signal. We find some evidence for the presence of a second short-period signal, at 5.15 days with a semi-amplitude of merely 40 cm/s. If caused by a planetary companion, it would correspond to a minimum mass of 0.29 $\pm$ 0.08 Me. We find that the FWHM of the CCF can be used as a proxy for the brightness changes and that its gradient with time can be used to successfully detrend the radial velocity data from part of the influence of stellar activity. The activity-induced radial velocity signal in the ESPRESSO data shows a trend in amplitude towards redder wavelengths. Velocities measured using the red end of the spectrograph are less affected by activity, suggesting that the stellar activity is spot-dominated. The data collected excludes the presence of extra companions with masses above 0.6 Me at periods shorter than 50 days.
△ Less
Submitted 26 May, 2020; v1 submitted 25 May, 2020;
originally announced May 2020.
-
Nightside condensation of iron in an ultra-hot giant exoplanet
Authors:
David Ehrenreich,
Christophe Lovis,
Romain Allart,
María Rosa Zapatero Osorio,
Francesco Pepe,
Stefano Cristiani,
Rafael Rebolo,
Nuno C. Santos,
Francesco Borsa,
Olivier Demangeon,
Xavier Dumusque,
Jonay I. González Hernández,
Núria Casasayas-Barris,
Damien Ségransan,
Sérgio Sousa,
Manuel Abreu,
Vardan Adibekyan,
Michael Affolter,
Carlos Allende Prieto,
Yann Alibert,
Matteo Aliverti,
David Alves,
Manuel Amate,
Gerardo Avila,
Veronica Baldini
, et al. (72 additional authors not shown)
Abstract:
Ultra-hot giant exoplanets receive thousands of times Earth's insolation. Their high-temperature atmospheres (>2,000 K) are ideal laboratories for studying extreme planetary climates and chemistry. Daysides are predicted to be cloud-free, dominated by atomic species and substantially hotter than nightsides. Atoms are expected to recombine into molecules over the nightside, resulting in different d…
▽ More
Ultra-hot giant exoplanets receive thousands of times Earth's insolation. Their high-temperature atmospheres (>2,000 K) are ideal laboratories for studying extreme planetary climates and chemistry. Daysides are predicted to be cloud-free, dominated by atomic species and substantially hotter than nightsides. Atoms are expected to recombine into molecules over the nightside, resulting in different day-night chemistry. While metallic elements and a large temperature contrast have been observed, no chemical gradient has been measured across the surface of such an exoplanet. Different atmospheric chemistry between the day-to-night ("evening") and night-to-day ("morning") terminators could, however, be revealed as an asymmetric absorption signature during transit. Here, we report the detection of an asymmetric atmospheric signature in the ultra-hot exoplanet WASP-76b. We spectrally and temporally resolve this signature thanks to the combination of high-dispersion spectroscopy with a large photon-collecting area. The absorption signal, attributed to neutral iron, is blueshifted by -11+/-0.7 km s-1 on the trailing limb, which can be explained by a combination of planetary rotation and wind blowing from the hot dayside. In contrast, no signal arises from the nightside close to the morning terminator, showing that atomic iron is not absorbing starlight there. Iron must thus condense during its journey across the nightside.
△ Less
Submitted 11 March, 2020;
originally announced March 2020.
-
Making SPIFFI SPIFFIER: Upgrade of the SPIFFI instrument for use in ERIS and performance analysis from re-commissioning
Authors:
E. M. George,
D. Gräff,
H. Feuchtgruber,
M. Hartl,
F. Eisenhauer,
A. Buron,
R. Davies,
R. Genzel,
H. Huber,
C. Rau,
M. Plattner,
E. Wiezorrek,
H. Weisz,
P. Amico,
A. Glindeman,
G. Hau,
H. Kuntschner,
A. Modigliani
Abstract:
SPIFFI is an AO-fed integral field spectrograph operating as part of SINFONI on the VLT, which will be upgraded and reused as SPIFFIER in the new VLT instrument ERIS. In January 2016, we used new technology developments to perform an early upgrade to optical subsystems in the SPIFFI instrument so ongoing scientific programs can make use of enhanced performance before ERIS arrives in 2020. We repor…
▽ More
SPIFFI is an AO-fed integral field spectrograph operating as part of SINFONI on the VLT, which will be upgraded and reused as SPIFFIER in the new VLT instrument ERIS. In January 2016, we used new technology developments to perform an early upgrade to optical subsystems in the SPIFFI instrument so ongoing scientific programs can make use of enhanced performance before ERIS arrives in 2020. We report on the upgraded components and the performance of SPIFFI after the upgrade, including gains in throughput and spatial and spectral resolution. We show results from re-commissioning, highlighting the potential for scientific programs to use the capabilities of the upgraded SPIFFI. Finally, we discuss the additional upgrades for SPIFFIER which will be implemented before it is integrated into ERIS.
△ Less
Submitted 2 November, 2016; v1 submitted 8 August, 2016;
originally announced August 2016.
-
A Flexible and Modular Data Reduction Library for Fiber-fed Echelle Spectrographs
Authors:
Danuta Sosnowska,
Christophe Lovis,
Pedro Figueira,
Andrea Modigliani,
Paolo Di Marcantonio,
Denis Megevand,
Francesco Pepe
Abstract:
Within the ESPRESSO project a new flexible data reduction library is being built. ESPRESSO, the Echelle SPectrograph for Rocky Exoplanets and Stable Spectral Observations is a fiber-fed, high-resolution, cross-dispersed echelle spectrograph. One of its main scientific goals is to search for terrestrial exoplanets using the radial velocity technique. A dedicated pipeline is being developed. It is d…
▽ More
Within the ESPRESSO project a new flexible data reduction library is being built. ESPRESSO, the Echelle SPectrograph for Rocky Exoplanets and Stable Spectral Observations is a fiber-fed, high-resolution, cross-dispersed echelle spectrograph. One of its main scientific goals is to search for terrestrial exoplanets using the radial velocity technique. A dedicated pipeline is being developed. It is designed to be able to reduce data from different similar spectrographs: not only ESPRESSO, but also HARPS, HARPS-N and possibly others. Instrument specifics are configurable through an input static configuration table. The first written recipes are already tested on HARPS and HARPS-N real data and ESPRESSO simulated data. The final scientific products of the pipeline will be the extracted 1-dim and 2-dim spectra. Using these products the radial velocity of the observed object can be computed with high accuracy. The library is developed within the standard ESO pipeline environment. It is being written in ANSI C and makes use of the Common Pipeline Library (CPL). It can be used in conjunction with the ESO tools Esorex, Gasgano and Reflex in the usual way.
△ Less
Submitted 18 September, 2015;
originally announced September 2015.
-
Flux calibration of medium-resolution spectra from 300 nm to 2500 nm: Model reference spectra and telluric correction
Authors:
S. Moehler,
A. Modigliani,
W. Freudling,
N. Giammichele,
A. Gianninas,
A. Gonneau,
W. Kausch,
A. Lancon,
S. Noll,
T. Rauch,
J. Vinther
Abstract:
While the near-infrared wavelength regime is becoming more and more important for astrophysics there is a marked lack of spectrophotometric standard star data that would allow the flux calibration of such data. Furthermore, flux calibrating medium- to high-resolution échelle spectroscopy data is challenging even in the optical wavelength range, because the available flux standard data are often to…
▽ More
While the near-infrared wavelength regime is becoming more and more important for astrophysics there is a marked lack of spectrophotometric standard star data that would allow the flux calibration of such data. Furthermore, flux calibrating medium- to high-resolution échelle spectroscopy data is challenging even in the optical wavelength range, because the available flux standard data are often too coarsely sampled. We will provide standard star reference data that allow users to derive response curves from 300nm to 2500nm for spectroscopic data of medium to high resolution, including those taken with échelle spectrographs. In addition we describe a method to correct for moderate telluric absorption without the need of observing telluric standard stars. As reference data for the flux standard stars we use theoretical spectra derived from stellar model atmospheres. We verify that they provide an appropriate description of the observed standard star spectra by checking for residuals in line cores and line overlap regions in the ratios of observed (X-shooter) spectra to model spectra. The finally selected model spectra are then corrected for remaining mismatches and photometrically calibrated using independent observations. The correction of telluric absorption is performed with the help of telluric model spectra.We provide new, finely sampled reference spectra without telluric absorption for six southern flux standard stars that allow the users to flux calibrate their data from 300 nm to 2500 nm, and a method to correct for telluric absorption using atmospheric models.
△ Less
Submitted 8 August, 2014;
originally announced August 2014.
-
Skycorr: A general tool for spectroscopic sky subtraction
Authors:
S. Noll,
W. Kausch,
S. Kimeswenger,
M. Barden,
A. M. Jones,
A. Modigliani,
C. Szyszka,
J. Taylor
Abstract:
Airglow emission lines, which dominate the optical-to-near-IR sky radiation, show strong, line-dependent variability on various time scales. Therefore, the subtraction of the sky background in the affected wavelength regime becomes a problem if plain sky spectra have to be taken at a different time as the astronomical data. A solution of this issue is the physically motivated scaling of the airglo…
▽ More
Airglow emission lines, which dominate the optical-to-near-IR sky radiation, show strong, line-dependent variability on various time scales. Therefore, the subtraction of the sky background in the affected wavelength regime becomes a problem if plain sky spectra have to be taken at a different time as the astronomical data. A solution of this issue is the physically motivated scaling of the airglow lines in the plain sky data to fit the sky lines in the object spectrum. We have developed a corresponding instrument-independent approach based on one-dimensional spectra. Our code skycorr separates sky lines and sky/object continuum by an iterative approach involving a line finder and airglow line data. The sky lines are grouped according to their expected variability. The line groups in the sky data are then scaled to fit the sky in the science data. Required pixel-specific weights for overlapping groups are taken from a comprehensive airglow model. Deviations in the wavelength calibration are corrected by fitting Chebyshev polynomials and rebinning via asymmetric damped sinc kernels. The scaled sky lines and the sky continuum are subtracted separately. VLT X-Shooter data covering time intervals from two minutes to about one year were selected to illustrate the performance. Except for short time intervals of a few minutes, the sky line residuals were several times weaker than for sky subtraction without fitting. Further tests show that skycorr performs consistently better than the method of Davies (2007) developed for VLT SINFONI data.
△ Less
Submitted 14 May, 2014;
originally announced May 2014.
-
The Gaia-ESO Survey: processing of the FLAMES-UVES spectra
Authors:
G. G. Sacco,
L. Morbidelli,
E. Franciosini,
E. Maiorca,
S. Randich,
A. Modigliani,
G. Gilmore,
M. Asplund,
J. Binney,
P. Bonifacio,
J. Drew,
S. Feltzing,
A. Ferguson,
R. Jeffries,
G. Micela,
I. Negueruela,
T. Prusti,
H. -W. Rix,
A. Vallenari,
E. Alfaro,
C. Allende Prieto,
C. Babusiaux,
T. Bensby,
R. Blomme,
A. Bragaglia
, et al. (27 additional authors not shown)
Abstract:
The Gaia-ESO Survey is a large public spectroscopic survey that aims to derive radial velocities and fundamental parameters of about 10^5 Milky Way stars in the field and in clusters. Observations are carried out with the multi-object optical spectrograph FLAMES, using simultaneously the medium resolution (R~20,000) GIRAFFE spectrograph and the high resolution (R~47,000) UVES spectrograph. In this…
▽ More
The Gaia-ESO Survey is a large public spectroscopic survey that aims to derive radial velocities and fundamental parameters of about 10^5 Milky Way stars in the field and in clusters. Observations are carried out with the multi-object optical spectrograph FLAMES, using simultaneously the medium resolution (R~20,000) GIRAFFE spectrograph and the high resolution (R~47,000) UVES spectrograph. In this paper, we describe the methods and the software used for the data reduction, the derivation of the radial velocities, and the quality control of the FLAMES-UVES spectra. Data reduction has been performed using a workflow specifically developed for this project. This workflow runs the ESO public pipeline optimizing the data reduction for the Gaia-ESO Survey, performs automatically sky subtraction, barycentric correction and normalisation, and calculates radial velocities and a first guess of the rotational velocities. The quality control is performed using the output parameters from the ESO pipeline, by a visual inspection of the spectra and by the analysis of the signal-to-noise ratio of the spectra.
Using the observations of the first 18 months, specifically targets observed multiple times at different epochs, stars observed with both GIRAFFE and UVES, and observations of radial velocity standards, we estimated the precision and the accuracy of the radial velocities. The statistical error on the radial velocities is sigma~0.4 km s^-1 and is mainly due to uncertainties in the zero point of the wavelength calibration. However, we found a systematic bias with respect to the GIRAFFE spectra (~0.9 km s^-1) and to the radial velocities of the standard stars (~0.5 kms^-1) retrieved from the literature. This bias will be corrected in the future data releases, when a common zero point for all the setups and instruments used for the survey will be established.
△ Less
Submitted 19 March, 2014;
originally announced March 2014.
-
The Be-test in the Li-rich star \#1657 of NGC 6397: evidence for Li-flash in RGB stars?
Authors:
L. Pasquini,
A. Koch,
R. Smiljanic,
P. Bonifacio,
A. Modigliani
Abstract:
The Li-rich turn-off star in the globular cluster NGC 6397 could represent the smoking gun for some very rare episode of Li enrichment in globular clusters. We aim to understand the nature of the Li enrichment by performing a spectroscopic analysis of the star, in particular of its beryllium (Be) abundance, and by investigating its binary nature. We observe the near UV region where the Beii resona…
▽ More
The Li-rich turn-off star in the globular cluster NGC 6397 could represent the smoking gun for some very rare episode of Li enrichment in globular clusters. We aim to understand the nature of the Li enrichment by performing a spectroscopic analysis of the star, in particular of its beryllium (Be) abundance, and by investigating its binary nature. We observe the near UV region where the Beii resonance doublet and the NH bands are located. We could not detect the Beii lines and derive an upper limit of log (Be/H)< -12.2, that is consistent with the Be observed in other stars of the cluster. We could detect a weak G-band, which implies a mild carbon enhancement [C/Fe]$+0.4\pm0.2$. We could not detect the UV NH band, and we derive an upper limit [N/Fe]$< 0.0$. For oxygen we could notdetect any of the near UV OH lines, which implies that oxygen cannot be strongly enhanced in this star. This is consistent with the detection of the Oi triplet at 777nm, which is consistent with [O/Fe]~0.5. Combining the UVES and Mike data, we could not detect any variation in the radial velocity greater than 0.95 kms$^{-1}$ over 8 years. The chemical composition of the star strongly resembles that of `first generation' NGC6397 stars, with the huge Li as the only deviating abundance. Not detecting Be rules out two possible explanations of the Li overabundance: capture of a substellar body and spallation caused by a nearby type II SNe. Discrepancies are also found with respect to other accretion scenarios,except for contamination by the ejecta of a star that has undergone the RGB Li-flash.
△ Less
Submitted 30 January, 2014;
originally announced January 2014.
-
X-shooter, the new wide band intermediate resolution spectrograph at the ESO Very Large Telescope
Authors:
Joel Vernet,
H. Dekker,
S. D'Odorico,
L. Kaper,
P. Kjaergaard,
F. Hammer,
S. Randich,
F. Zerbi,
P. M. Groot,
J. Hjorth,
I. Guinouard,
R. Navarro,
T. Adolfse,
P. W. Albers,
J. -P. Amans,
J. J. Andersen,
M. I. Andersen,
P. Binetruy,
P. Bristow,
R. Castillo,
F. Chemla,
L. Christensen,
P. Conconi,
R. Conzelmann,
J. Dam
, et al. (65 additional authors not shown)
Abstract:
X-shooter is the first 2nd generation instrument of the ESO Very Large Telescope(VLT). It is a very efficient, single-target, intermediate-resolution spectrograph that was installed at the Cassegrain focus of UT2 in 2009. The instrument covers, in a single exposure, the spectral range from 300 to 2500 nm. It is designed to maximize the sensitivity in this spectral range through dichroic splitting…
▽ More
X-shooter is the first 2nd generation instrument of the ESO Very Large Telescope(VLT). It is a very efficient, single-target, intermediate-resolution spectrograph that was installed at the Cassegrain focus of UT2 in 2009. The instrument covers, in a single exposure, the spectral range from 300 to 2500 nm. It is designed to maximize the sensitivity in this spectral range through dichroic splitting in three arms with optimized optics, coatings, dispersive elements and detectors. It operates at intermediate spectral resolution (R~4,000 - 17,000, depending on wavelength and slit width) with fixed echelle spectral format (prism cross-dispersers) in the three arms. It includes a 1.8"x4" Integral Field Unit as an alternative to the 11" long slits. A dedicated data reduction package delivers fully calibrated two-dimensional and extracted spectra over the full wavelength range. We describe the main characteristics of the instrument and present its performance as measured during commissioning, science verification and the first months of science operations.
△ Less
Submitted 10 October, 2011;
originally announced October 2011.
-
Reflex: Scientific Workflows for the ESO Pipelines
Authors:
Pascal Ballester,
Daniel Bramich,
Vincenzo Forchi,
Wolfram Freudling,
Cesar Enrique Garcia-Dabo,
Maurice klein Gebbinck,
Andrea Modigliani,
Martino Romaniello
Abstract:
The recently released Reflex scientific workflow environment supports the interactive execution of ESO VLT data reduction pipelines. Reflex is based upon the Kepler workflow engine, and provides components for organising the data, executing pipeline recipes based on the ESO Common Pipeline Library, invoking Python scripts, and constructing interaction loops. Reflex will greatly enhance the quick v…
▽ More
The recently released Reflex scientific workflow environment supports the interactive execution of ESO VLT data reduction pipelines. Reflex is based upon the Kepler workflow engine, and provides components for organising the data, executing pipeline recipes based on the ESO Common Pipeline Library, invoking Python scripts, and constructing interaction loops. Reflex will greatly enhance the quick validation and reduction of the scientific data. In this paper we summarize the main features of Reflex, and demonstrate as an example its application to the reduction of echelle UVES data.
△ Less
Submitted 10 February, 2011;
originally announced February 2011.
-
The Physical Model in Action: Quality Control for X-Shooter
Authors:
Sabine Moehler,
Paul Bristow,
Florian Kerber,
Andrea Modigliani,
Joel Vernet
Abstract:
The data reduction pipeline for the VLT 2nd generation instrument X-Shooter uses a physical model to determine the optical distortion and derive the wavelength calibration. The parameters of this model describe the positions, orientations, and other physical properties of the optical components in the spectrograph. They are updated by an optimisation process that ensures the best possible fit to a…
▽ More
The data reduction pipeline for the VLT 2nd generation instrument X-Shooter uses a physical model to determine the optical distortion and derive the wavelength calibration. The parameters of this model describe the positions, orientations, and other physical properties of the optical components in the spectrograph. They are updated by an optimisation process that ensures the best possible fit to arc lamp line positions. ESO Quality Control monitors these parameters along with all of the usual diagnostics. This enables us to look for correlations between inferred physical changes in the instrument and, for example, instrument temperature sensor readings.
△ Less
Submitted 29 September, 2010;
originally announced September 2010.
-
Rest-frame ultraviolet spectrum of the gravitationally lensed galaxy `the 8 o'clock arc': stellar and interstellar medium properties
Authors:
M. Dessauges-Zavadsky,
S. D'Odorico,
D. Schaerer,
A. Modigliani,
C. Tapken,
J. Vernet
Abstract:
We present the first detailed analysis of the rest-frame UV spectrum of the gravitationally lensed Lyman break galaxy (LBG), the `8 o'clock arc'. The spectrum of the 8 o'clock arc is rich in stellar and interstellar medium (ISM) features, and presents several similarities to the well-known MS1512-cB58 LBG. The stellar photospheric absorption lines allowed us to constrain the systemic redshift, z…
▽ More
We present the first detailed analysis of the rest-frame UV spectrum of the gravitationally lensed Lyman break galaxy (LBG), the `8 o'clock arc'. The spectrum of the 8 o'clock arc is rich in stellar and interstellar medium (ISM) features, and presents several similarities to the well-known MS1512-cB58 LBG. The stellar photospheric absorption lines allowed us to constrain the systemic redshift, z_sys = 2.7350+/-0.0003, of the galaxy, and derive its stellar metallicity, Z=0.82 Z_sol. With a total stellar mass of ~4.2x10^{11} M_sol, the 8 o'clock arc agrees with the mass-metallicity relation found for z>2 star-forming galaxies. The 31 ISM absorption lines detected led to the abundance measurements of 9 elements. The metallicity of the ISM, Z=0.65 Z_sol (Si), is very comparable to the metallicity of stars and ionized gas, and suggests that the ISM of the 8 o'clock arc has been rapidly polluted and enriched by ejecta of OB stars. The ISM lines extend over ~1000 km/s and have their peak optical depth blueshifted relative to the stars, implying gas outflows of about -120 km/s. The Ly-alpha line is dominated by a damped absorption profile on top of which is superposed a weak emission, redshifted relative to the ISM lines by about +690 km/s and resulting from multiply backscattered Ly-alpha photons emitted in the HII region surrounded by the cold, expanding ISM shell. A homogeneous spherical radiation transfer shell model with a constant outflow velocity, determined by the observations, is able to reproduce the observed Ly-alpha line profile and dust content. These results fully support the scenario proposed earlier, where the diversity of Ly-alpha line profiles in LBGs and Ly-alpha emitters, from absorption to emission, is mostly due to variations of HI column density and dust content (abridged).
△ Less
Submitted 22 December, 2009;
originally announced December 2009.
-
The SINFONI pipeline
Authors:
Andrea Modigliani,
Wolfgang Hummel,
Roberto Abuter,
Paola Amico,
Pascal Ballester,
Richard Davies,
Christophe Dumas,
Mattew Horrobin,
Mark Neeser,
Markus Kissler-Patig,
Michele Peron,
Juha Rehunanen,
Juergen Schreiber,
Thomas Szeifert
Abstract:
The SINFONI data reduction pipeline, as part of the ESO-VLT Data Flow System, provides recipes for Paranal Science Operations, and for Data Flow Operations at Garching headquarters. At Paranal, it is used for the quick-look data evaluation. For Data Flow Operations, it fulfills several functions: creating master calibrations; monitoring instrument health and data quality; and reducing science da…
▽ More
The SINFONI data reduction pipeline, as part of the ESO-VLT Data Flow System, provides recipes for Paranal Science Operations, and for Data Flow Operations at Garching headquarters. At Paranal, it is used for the quick-look data evaluation. For Data Flow Operations, it fulfills several functions: creating master calibrations; monitoring instrument health and data quality; and reducing science data for delivery to service mode users. The pipeline is available to the science community for reprocessing data with personalised reduction strategies and parameters. The pipeline recipes can be executed either with EsoRex at the command line level or through the Gasgano graphical user interface. The recipes are implemented with the ESO Common Pipeline Library (CPL).
SINFONI is the Spectrograph for INtegral Field Observations in the Near Infrared (1.1-2.45 um) at the ESO-VLT. SINFONI was developed and build by ESO and MPE in collaboration with NOVA. It consists of the SPIFFI integral field spectrograph and an adaptive optics module which allows diffraction limited and seeing limited observations. The image slicer of SPIFFI chops the SINFONI field of view on the sky in 32 slices which are re-arranged to a pseudo slit. The latter is dispersed by one of the four possible gratings (J, H, K, H+K). The detector thus sees a spatial dimension (along the pseudo-slit) and a spectral dimension.
We describe in this paper the main data reduction procedures of the SINFONI pipeline, which is based on SPRED - the SPIFFI data reduction software developed by MPE, and the most recent developments after more than a year of SINFONI operations.
△ Less
Submitted 5 February, 2007; v1 submitted 10 January, 2007;
originally announced January 2007.
