Showing 1–33 of 33 results for author: Walter, B

The Morphology of Asteroidal Dust Around White Dwarf Stars: Optical and Near-infrared Pulsations in G29-38

Authors: T. von Hippel, J. Farihi, J. L. Provencal, S. J. Kleinman, J. E. Pringle, A. Swan, G. Fontaine, J. J. Hermes, J. Sargent, Z. Savery, W. Cooper, V. Kim, V. Kozyreva, M. Krugov, A. Kusakin, A. Moss, W. Ogloza, E. Pakstiene, A. Serebryanskiy, E. Sonbas, B. Walter, M. Zejmo, S. Zola

Abstract: More than 36 years have passed since the discovery of the infrared excess from circumstellar dust orbiting the white dwarf G29-38, which at 17.5 pc it is the nearest and brightest of its class. The precise morphology of the orbiting dust remains only marginally constrained by existing data, subject to model-dependent inferences, and thus fundamental questions of its dynamical origin and evolution… ▽ More More than 36 years have passed since the discovery of the infrared excess from circumstellar dust orbiting the white dwarf G29-38, which at 17.5 pc it is the nearest and brightest of its class. The precise morphology of the orbiting dust remains only marginally constrained by existing data, subject to model-dependent inferences, and thus fundamental questions of its dynamical origin and evolution persist. This study presents a means to constrain the geometric distribution of the emitting dust using stellar pulsations measured at optical wavelengths as a variable illumination source of the dust, which re-radiates primarily in the infrared. By combining optical photometry from the Whole Earth Telescope with 0.7-2.5 micron spectroscopy obtained with SpeX at NASA's Infrared Telescope Facility, we detect luminosity variations at all observed wavelengths, with variations at most wavelengths corresponding to the behavior of the pulsating stellar photosphere, but towards the longest wavelengths the light curves probe the corresponding time-variability of the circumstellar dust. In addition to developing methodology, we find pulsation amplitudes decrease with increasing wavelength for principal pulsation modes, yet increase beyond approximately 2 microns for nonlinear combination frequencies. We interpret these results as combination modes deriving from principal modes of identical l values and discuss the implications for the morphology of the warm dust. We also draw attention to some discrepancies between our findings and theoretical expectations for the results of the non-linearity imposed by the surface convection zone on mode--mode interactions and on the behavior of the first harmonic of the highest-amplitude pulsation mode. △ Less

Submitted 4 January, 2024; originally announced January 2024.

Comments: 12 pages, 6 figures, to be published in The Astrophysical Journal

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Authors: Nemanja Jovanovic, Pradip Gatkine, Narsireddy Anugu, Rodrigo Amezcua-Correa, Ritoban Basu Thakur, Charles Beichman, Chad Bender, Jean-Philippe Berger, Azzurra Bigioli, Joss Bland-Hawthorn, Guillaume Bourdarot, Charles M. Bradford, Ronald Broeke, Julia Bryant, Kevin Bundy, Ross Cheriton, Nick Cvetojevic, Momen Diab, Scott A. Diddams, Aline N. Dinkelaker, Jeroen Duis, Stephen Eikenberry, Simon Ellis, Akira Endo, Donald F. Figer , et al. (55 additional authors not shown)

Abstract: Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio… ▽ More Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Comments: 191 pages, 47 figures. This is the version of the article before peer review or editing, as submitted by an author to J. Phys. Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://iopscience.iop.org/article/10.1088/2515-7647/ace869/meta

Journal ref: J. Phys. Photonics 5 042501 (2023)

Experimental demonstration of spectral linear dark field control at NASA's high contrast imaging testbeds

Authors: Phillip K. Poon, Axel Potier, Garreth Ruane, Alex B. Walter, A J Eldorado Riggs, Matthew Noyes, Camilo Mejia Prada, Kyohoon Ahn, Olivier Guyon

Abstract: Due to the low flux of exoEarths, long exposure times are required to spectrally characterize them. During these long exposures, the contrast in the dark hole will degrade as the the optical system drifts from its initial DH state. To prevent such contrast drift, a wavefront sensing and control (WFSC) algorithm running in parallel to the science acquisition can stabilize the contrast. However, pai… ▽ More Due to the low flux of exoEarths, long exposure times are required to spectrally characterize them. During these long exposures, the contrast in the dark hole will degrade as the the optical system drifts from its initial DH state. To prevent such contrast drift, a wavefront sensing and control (WFSC) algorithm running in parallel to the science acquisition can stabilize the contrast. However, pairwise probing (PWP) cannot be reused to efficiently stabilize the contrast since it relies on strong temporal modulation of the intensity in the image plane, which would interrupt the science acquisition. The use of small amplitude probes has been demonstrated but requires multiple measurements from each science sub-band to converge. Conversely, spectral linear dark field control (LDFC) takes advantage of the linear relationship between the change in intensity of the post-coronagraph out-of-band image and small changes in wavefront in the science band to preserve the DH region during science exposures. In this paper, we show experimental results that demonstrate spectral LDFC stabilizes the contrast to levels of a few $10^{-9}$ on a Lyot coronagraph testbed which is housed in a vacuum chamber. Promising results show that spectral LDFC is able to correct for disturbances that degrade the contrast by more than 100$\times$. To our knowledge, this is the first experimental demonstration of spectral LDFC and the first demonstration of spatial or spectral LDFC on a vacuum coronagraph testbed and at contrast levels less than $10^{-8}$. △ Less

Submitted 29 September, 2023; originally announced September 2023.

Comments: 14 pages, 10 figures, Techniques and Instrumentation for Detection of Exoplanets XI

Report number: URS318828

Dual Purpose Lyot Coronagraph Masks for Simultaneous High-Contrast Imaging and High-Resolution Wavefront Sensing

Authors: Garreth Ruane, J. Kent Wallace, A J Eldorado Riggs, Tobias Wenger, Mahmood Bagheri, Jeffrey Jewell, Nasrat Raouf, Gregory Allan, Camilo Mejia Prada, Matthew Noyes, Alex B. Walter

Abstract: Directly imaging Earth-sized exoplanets with a visible-light coronagraph instrument on a space telescope will require a system that can achieve $\sim10^{-10}$ raw contrast and maintain it for the duration of observations (on the order of hours or more). We are designing, manufacturing, and testing Dual Purpose Lyot coronagraph (DPLC) masks that allow for simultaneous wavefront sensing and control… ▽ More Directly imaging Earth-sized exoplanets with a visible-light coronagraph instrument on a space telescope will require a system that can achieve $\sim10^{-10}$ raw contrast and maintain it for the duration of observations (on the order of hours or more). We are designing, manufacturing, and testing Dual Purpose Lyot coronagraph (DPLC) masks that allow for simultaneous wavefront sensing and control using out-of-band light to maintain high contrast in the science focal plane. Our initial design uses a tiered metallic focal plane occulter to suppress starlight in the transmitted coronagraph channel and a dichroic-coated substrate to reflect out-of-band light to a wavefront sensing camera. The occulter design introduces a phase shift such that the reflected channel is a Zernike wavefront sensor. The dichroic coating allows higher-order wavefront errors to be detected which is especially critical for compensating for residual drifts from an actively-controlled segmented primary mirror. A second-generation design concept includes a metasurface to create polarization-dependent phase shifts in the reflected beam, which has several advantages including an extended dynamic range. We will present the focal plane mask designs, characterization, and initial testing at NASA's High Contrast Imaging Testbed (HCIT) facility. △ Less

Submitted 20 August, 2023; originally announced August 2023.

Comments: To appear in the Proceedings of the SPIE, Techniques and Instrumentation for Detection of Exoplanets XI

Probing Photon Statistics in Adaptive Optics Images with SCExAO/MEC

Authors: Sarah Steiger, Timothy D. Brandt, Olivier Guyon, Noah Swimmer, Alexander B. Walter, Clinton Bockstiegel, Julien Lozi, Vincent Deo, Sebastien Vievard, Nour Skaf, Kyohoon Ahn, Nemanja Jovanovic, Frantz Martinache, Benjamin A. Mazin

Abstract: We present an experimental study of photon statistics for high-contrast imaging with the Microwave Kinetic Inductance Detector (MKID) Exoplanet Camera (MEC) located behind the Subaru Coronagraphic Extreme Adaptive Optics System (SCExAO) at the Subaru Telescope. We show that MEC measures the expected distributions for both on-axis companion intensity and off-axis intensity which manifests as quasi-… ▽ More We present an experimental study of photon statistics for high-contrast imaging with the Microwave Kinetic Inductance Detector (MKID) Exoplanet Camera (MEC) located behind the Subaru Coronagraphic Extreme Adaptive Optics System (SCExAO) at the Subaru Telescope. We show that MEC measures the expected distributions for both on-axis companion intensity and off-axis intensity which manifests as quasi-static speckles in the image plane and currently limits high-contrast imaging performance. These statistics can be probed by any MEC observation due to the photon-counting capabilities of MKID detectors. Photon arrival time statistics can also be used to directly distinguish companions from speckles using a post-processing technique called Stochastic Speckle Discrimination (SSD). Here, we we give an overview of the SSD technique and highlight the first demonstration of SSD on an extended source -- the protoplanetary disk AB Aurigae. We then present simulations that provide an in-depth exploration as to the current limitations of an extension of the SSD technique called Photon-Counting SSD (PCSSD) to provide a path forward for transitioning PCSSD from simulations to on-sky results. We end with a discussion of how to further improve the efficacy of such arrival time based post-processing techniques applicable to both MKIDs, as well as other high speed astronomical cameras. △ Less

Submitted 13 September, 2022; originally announced September 2022.

Comments: 11 pages, 9 figures, accepted for publication in AJ

SCExAO and Keck Direct Imaging Discovery of a Low-Mass Companion Around the Accelerating F5 Star HIP 5319

Authors: Noah Swimmer, Thayne Currie, Sarah Steiger, Gregory Mirek Brandt, Timothy D. Brandt, Olivier Guyon, Masayuki Kuzuhara, Jeffrey Chilcote, Taylor Tobin, Tyler D. Groff, Julien Lozi, John I. Bailey III, Alexander B. Walter, Neelay Fruitwala, Nicholas Zobrist, Jennifer Pearl Smith, Gregoire Coiffard, Rupert Dodkins, Kristina K. Davis, Miguel Daal, Bruce Bumble, Sebastien Vievard, Nour Skaf, Vincent Deo, Nemanja Jovanovic , et al. (4 additional authors not shown)

Abstract: We present the direct imaging discovery of a low-mass companion to the nearby accelerating F star, HIP 5319, using SCExAO coupled with the CHARIS, VAMPIRES, and MEC instruments in addition to Keck/NIRC2 imaging. CHARIS $JHK$ (1.1-2.4 $μ$m) spectroscopic data combined with VAMPIRES 750 nm, MEC $Y$, and NIRC2 $L_{\rm p}$ photometry is best matched by an M3--M7 object with an effective temperature of… ▽ More We present the direct imaging discovery of a low-mass companion to the nearby accelerating F star, HIP 5319, using SCExAO coupled with the CHARIS, VAMPIRES, and MEC instruments in addition to Keck/NIRC2 imaging. CHARIS $JHK$ (1.1-2.4 $μ$m) spectroscopic data combined with VAMPIRES 750 nm, MEC $Y$, and NIRC2 $L_{\rm p}$ photometry is best matched by an M3--M7 object with an effective temperature of T=3200 K and surface gravity log($g$)=5.5. Using the relative astrometry for HIP 5319 B from CHARIS and NIRC2 and absolute astrometry for the primary from $Gaia$ and $Hipparcos$ and adopting a log-normal prior assumption for the companion mass, we measure a dynamical mass for HIP 5319 B of $31^{+35}_{-11}M_{\rm J}$, a semimajor axis of $18.6^{+10}_{-4.1}$ au, an inclination of $69.4^{+5.6}_{-15}$ degrees, and an eccentricity of $0.42^{+0.39}_{-0.29}$. However, using an alternate prior for our dynamical model yields a much higher mass of 128$^{+127}_{-88}M_{\rm J}$. Using data taken with the LCOGT NRES instrument we also show that the primary HIP 5319 A is a single star in contrast to previous characterizations of the system as a spectroscopic binary. This work underscores the importance of assumed priors in dynamical models for companions detected with imaging and astrometry and the need to have an updated inventory of system measurements. △ Less

Submitted 30 July, 2022; originally announced August 2022.

Comments: 19 pages, 9 figuresm 5 tables

Validation of 13 Hot and Potentially Terrestrial TESS Planets

Authors: Steven Giacalone, Courtney D. Dressing, Christina Hedges, Veselin B. Kostov, Karen A. Collins, Eric L. N. Jensen, Daniel A. Yahalomi, Allyson Bieryla, David R. Ciardi, Steve B. Howell, Jorge Lillo-Box, Khalid Barkaoui, Jennifer G. Winters, Elisabeth Matthews, John H. Livingston, Samuel N. Quinn, Boris S. Safonov, Charles Cadieux, E. Furlan, Ian J. M. Crossfield, Avi M. Mandell, Emily A. Gilbert, Ethan Kruse, Elisa V. Quintana, George R. Ricker , et al. (86 additional authors not shown)

Abstract: The James Webb Space Telescope (JWST) will be able to probe the atmospheres and surface properties of hot, terrestrial planets via emission spectroscopy. We identify 18 potentially terrestrial planet candidates detected by the Transiting Exoplanet Survey Satellite (TESS) that would make ideal targets for these observations. These planet candidates cover a broad range of planet radii (… ▽ More The James Webb Space Telescope (JWST) will be able to probe the atmospheres and surface properties of hot, terrestrial planets via emission spectroscopy. We identify 18 potentially terrestrial planet candidates detected by the Transiting Exoplanet Survey Satellite (TESS) that would make ideal targets for these observations. These planet candidates cover a broad range of planet radii ($R_{\rm p} \sim 0.6 - 2.0 R_\oplus$) and orbit stars of various magnitudes ($K_s = 5.78 - 10.78$, $V = 8.4 - 15.69$) and effective temperatures ($T_{\rm eff }\sim 3000 - 6000$ K). We use ground-based observations collected through the TESS Follow-up Observing Program (TFOP) and two vetting tools -- DAVE and TRICERATOPS -- to assess the reliabilities of these candidates as planets. We validate 13 planets: TOI-206 b, TOI-500 b, TOI-544 b, TOI-833 b, TOI-1075 b, TOI-1411 b, TOI-1442 b, TOI-1693 b, TOI-1860 b, TOI-2260 b, TOI-2411 b, TOI-2427 b, and TOI-2445 b. Seven of these planets (TOI-206 b, TOI-500 b, TOI-1075 b, TOI-1442 b, TOI-2260 b, TOI-2411 b, and TOI-2445 b) are ultra-short-period planets. TOI-1860 is the youngest ($133 \pm 26$ Myr) solar twin with a known planet to date. TOI-2260 is a young ($321 \pm 96$ Myr) G dwarf that is among the most metal-rich ([Fe/H] = $0.22 \pm 0.06$ dex) stars to host an ultra-short-period planet. With an estimated equilibrium temperature of $\sim 2600$ K, TOI-2260 b is also the fourth hottest known planet with $R_{\rm p} < 2 \, R_\oplus$. △ Less

Submitted 11 February, 2022; v1 submitted 29 January, 2022; originally announced January 2022.

Journal ref: AJ 163 99 (2022)

TIC 172900988: A Transiting Circumbinary Planet Detected in One Sector of TESS Data

Authors: Veselin B. Kostov, Brian P. Powell, Jerome A. Orosz, William F. Welsh, William Cochran, Karen A. Collins, Michael Endl, Coel Hellier, David W. Latham, Phillip MacQueen, Joshua Pepper, Billy Quarles, Lalitha Sairam, Guillermo Torres, Robert F. Wilson, Serge Bergeron, Pat Boyce, Allyson Bieryla, Robert Buchheim, Caleb Ben Christiansen, David R. Ciardi, Kevin I. Collins, Dennis M. Conti, Scott Dixon, Pere Guerra , et al. (64 additional authors not shown)

Abstract: We report the first discovery of a transiting circumbinary planet detected from a single sector of TESS data. During Sector 21, the planet TIC 172900988b transited the primary star and then 5 days later it transited the secondary star. The binary is itself eclipsing, with a period of P = 19.7 days and an eccentricity of e = 0.45. Archival data from ASAS-SN, Evryscope, KELT, and SuperWASP reveal a… ▽ More We report the first discovery of a transiting circumbinary planet detected from a single sector of TESS data. During Sector 21, the planet TIC 172900988b transited the primary star and then 5 days later it transited the secondary star. The binary is itself eclipsing, with a period of P = 19.7 days and an eccentricity of e = 0.45. Archival data from ASAS-SN, Evryscope, KELT, and SuperWASP reveal a prominent apsidal motion of the binary orbit, caused by the dynamical interactions between the binary and the planet. A comprehensive photodynamical analysis of the TESS, archival and follow-up data yields stellar masses and radii of M1 = 1.2384 +/- 0.0007 MSun and R1 = 1.3827 +/- 0.0016 RSun for the primary and M2 = 1.2019 +/- 0.0007 MSun and R2 = 1.3124 +/- 0.0012 RSun for the secondary. The radius of the planet is R3 = 11.25 +/- 0.44 REarth (1.004 +/- 0.039 RJup). The planet's mass and orbital properties are not uniquely determined - there are six solutions with nearly equal likelihood. Specifically, we find that the planet's mass is in the range of 824 < M3 < 981 MEarth (2.65 < M3 < 3.09 MJup), its orbital period could be 188.8, 190.4, 194.0, 199.0, 200.4, or 204.1 days, and the eccentricity is between 0.02 and 0.09. At a V = 10.141 mag, the system is accessible for high-resolution spectroscopic observations, e.g. Rossiter-McLaughlin effect and transit spectroscopy. △ Less

Submitted 27 August, 2021; v1 submitted 18 May, 2021; originally announced May 2021.

Comments: 57 pages, 30 figures, 25 tables; Accepted AJ

End-to-end Deep Learning Pipeline for Microwave Kinetic Inductance Detector (MKID) Resonator Identification and Tuning

Authors: Neelay Fruitwala, Alex B Walter, John I Bailey III, Rupert Dodkins, Benjamin A Mazin

Abstract: We present the development of a machine learning based pipeline to fully automate the calibration of the frequency comb used to read out optical/IR Microwave Kinetic Inductance Detector (MKID) arrays. This process involves determining the resonant frequency and optimal drive power of every pixel (i.e. resonator) in the array, which is typically done manually. Modern optical/IR MKID arrays, such as… ▽ More We present the development of a machine learning based pipeline to fully automate the calibration of the frequency comb used to read out optical/IR Microwave Kinetic Inductance Detector (MKID) arrays. This process involves determining the resonant frequency and optimal drive power of every pixel (i.e. resonator) in the array, which is typically done manually. Modern optical/IR MKID arrays, such as DARKNESS (DARK-speckle Near-infrared Energy-resolving Superconducting Spectrophotometer) and MEC (MKID Exoplanet Camera), contain 10-20,000 pixels, making the calibration process extremely time consuming; each 2000 pixel feedline requires 4-6 hours of manual tuning. Here we present a pipeline which uses a single convolutional neural network (CNN) to perform both resonator identification and tuning simultaneously. We find that our pipeline has performance equal to that of the manual tuning process, and requires just twelve minutes of computational time per feedline. △ Less

Submitted 2 April, 2021; originally announced April 2021.

Comments: 28 pages, 13 figures

SCExAO/MEC and CHARIS Discovery of a Low Mass, 6 AU-Separation Companion to HIP 109427 using Stochastic Speckle Discrimination and High-Contrast Spectroscopy

Authors: Sarah Steiger, Thayne Currie, Timothy D. Brandt, Olivier Guyon, Masayuki Kuzuhara, Jeffrey Chilcote, Tyler D. Groff, Julien Lozi, Alexander B. Walter, Neelay Fruitwala, John I. Bailey III, Nicholas Zobrist, Noah Swimmer, Isabel Lipartito, Jennifer Pearl Smith, Clint Bockstiegel, Seth R. Meeker, Gregoire Coiffard, Rupert Dodkins, Paul Szypryt, Kristina K. Davis, Miguel Daal, Bruce Bumble, Sebastien Vievard, Ananya Sahoo , et al. (6 additional authors not shown)

Abstract: We report the direct imaging discovery of a low-mass companion to the nearby accelerating A star, HIP 109427, with the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument coupled with the MKID Exoplanet Camera (MEC) and CHARIS integral field spectrograph. CHARIS data reduced with reference star PSF subtraction yield 1.1-2.4 $μ$m spectra. MEC reveals the companion in $Y$ and $J$ band a… ▽ More We report the direct imaging discovery of a low-mass companion to the nearby accelerating A star, HIP 109427, with the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument coupled with the MKID Exoplanet Camera (MEC) and CHARIS integral field spectrograph. CHARIS data reduced with reference star PSF subtraction yield 1.1-2.4 $μ$m spectra. MEC reveals the companion in $Y$ and $J$ band at a comparable signal-to-noise ratio using stochastic speckle discrimination, with no PSF subtraction techniques. Combined with complementary follow-up $L_{\rm p}$ photometry from Keck/NIRC2, the SCExAO data favors a spectral type, effective temperature, and luminosity of M4-M5.5, 3000-3200 $K$, and $\log_{10}(L/L_{\rm \odot}) = -2.28^{+0.04}_{-0.04}$, respectively. Relative astrometry of HIP 109427 B from SCExAO/CHARIS and Keck/NIRC2, and complementary Gaia-Hipparcos absolute astrometry of the primary favor a semimajor axis of $6.55^{+3.0}_{-0.48}$ au, an eccentricity of $0.54^{+0.28}_{-0.15}$, an inclination of $66.7^{+8.5}_{-14}$ degrees, and a dynamical mass of $0.280^{+0.18}_{-0.059}$ $M_{\odot}$. This work shows the potential for extreme AO systems to utilize speckle statistics in addition to widely-used post-processing methods to directly image faint companions to nearby stars near the telescope diffraction limit. △ Less

Submitted 12 July, 2021; v1 submitted 11 March, 2021; originally announced March 2021.

Comments: 13 pages, 7 figures, 3 tables

Journal ref: The Astronomical Journal, Volume 162, Number 2, 2021

Second Generation Readout For Large Format Photon Counting Microwave Kinetic Inductance Detectors

Authors: Neelay Fruitwala, Paschal Strader, Gustavo Cancelo, Ted Zmuda, Ken Treptow, Neal Wilcer, Chris Stoughton, Alex B. Walter, Nicholas Zobrist, Giulia Collura, Isabel Lipartito, John I. Bailey III, Benjamin A. Mazin

Abstract: We present the development of a second generation digital readout system for photon counting microwave kinetic inductance detector (MKID) arrays operating in the optical and near-IR wavelength bands. Our system retains much of the core signal processing architecture from the first generation system, but with a significantly higher bandwidth, enabling readout of kilopixel MKID arrays. Each set of r… ▽ More We present the development of a second generation digital readout system for photon counting microwave kinetic inductance detector (MKID) arrays operating in the optical and near-IR wavelength bands. Our system retains much of the core signal processing architecture from the first generation system, but with a significantly higher bandwidth, enabling readout of kilopixel MKID arrays. Each set of readout boards is capable of reading out 1024 MKID pixels multiplexed over 2 GHz of bandwidth; two such units can be placed in parallel to read out a full 2048 pixel microwave feedline over a 4 -- 8 GHz band. As in the first generation readout, our system is capable of identifying, analyzing, and recording photon detection events in real time with a time resolution of order a few microseconds. Here, we describe the hardware and firmware, and present an analysis of the noise properties of the system. We also present a novel algorithm for efficiently suppressing IQ mixer sidebands to below -30 dBc. △ Less

Submitted 12 November, 2020; originally announced November 2020.

Comments: 12 pages, 12 figures

The MKID Exoplanet Camera for Subaru SCExAO

Authors: Alexander B. Walter, Neelay Fruitwala, Sarah Steiger, John I. Bailey III, Nicholas Zobrist, Noah Swimmer, Isabel Lipartito, Jennifer Pearl Smith, Seth R. Meeker, Clint Bockstiegel, Gregoire Coiffard, Rupert Dodkins, Paul Szypryt, Kristina K. Davis, Miguel Daal, Bruce Bumble, Giulia Collura, Olivier Guyon, Julien Lozi, Sebastien Vievard, Nemanja Jovanovic, Frantz Martinache, Thayne Currie, Benjamin A. Mazin

Abstract: We present the MKID Exoplanet Camera (MEC), a z through J band (800 - 1400 nm) integral field spectrograph located behind The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) at the Subaru Telescope on Maunakea that utilizes Microwave Kinetic Inductance Detectors (MKIDs) as the enabling technology for high contrast imaging. MEC is the first permanently deployed near-infrared MKID instrument a… ▽ More We present the MKID Exoplanet Camera (MEC), a z through J band (800 - 1400 nm) integral field spectrograph located behind The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) at the Subaru Telescope on Maunakea that utilizes Microwave Kinetic Inductance Detectors (MKIDs) as the enabling technology for high contrast imaging. MEC is the first permanently deployed near-infrared MKID instrument and is designed to operate both as an IFU, and as a focal plane wavefront sensor in a multi-kHz feedback loop with SCExAO. The read noise free, fast time domain information attainable by MKIDs allows for the direct probing of fast speckle fluctuations that currently limit the performance of most high contrast imaging systems on the ground and will help MEC achieve its ultimate goal of reaching contrasts of $10^{-7}$ at 2$λ/ D$. Here we outline the instrument details of MEC including the hardware, firmware, and data reduction and analysis pipeline. We then discuss MEC's current on-sky performance and end with future upgrades and plans. △ Less

Submitted 23 October, 2020; originally announced October 2020.

Comments: To be published in Publications of the Astronomical Society of the Pacific

GJ 3470 c: A Saturn-like Exoplanet Candidate in the Habitable Zone of GJ 3470

Authors: Phillip Scott, Bradley Walter, Quanzhi Ye, David Mitchell, Leo Heiland, Xing Gao, Alejandro Palado, Burkhonov Otabek, Jesus Delgado Casal, Colin Hill, Alberto Garcia, Kevin B. Alton, Yenal Ogmen, Vikrant Kumar Agnihotri, Alberto Caballero

Abstract: We report the discovery of a new exoplanet candidate orbiting the star GJ 3470. A total of three transits were detected by OKSky Observatory: the first one on December 23, 2019, the second one on February 27, 2020, and the third one on May 3, 2020. We estimate an average transit depth of 0.84 percent and duration of 1 hour and 2 minutes. Based on this parameter, we calculate a radius of 9.2 Earth… ▽ More We report the discovery of a new exoplanet candidate orbiting the star GJ 3470. A total of three transits were detected by OKSky Observatory: the first one on December 23, 2019, the second one on February 27, 2020, and the third one on May 3, 2020. We estimate an average transit depth of 0.84 percent and duration of 1 hour and 2 minutes. Based on this parameter, we calculate a radius of 9.2 Earth radii, which would correspond to the size of a Saturn-like exoplanet. We also estimate an orbital period of 66 days that places the exoplanet inside the habitable zone, near the orbital distance at Earths equivalent radiation. Another twelve potential transits that do not belong to GJ 3470 b are also reported. Despite our candidate for GJ 3470 c still has to be confirmed by the scientific community, the discovery represents a turning point in exoplanet research for being the first candidate discovered through an international project managed by amateur astronomers. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Flexible Coaxial Ribbon Cable for High-Density Superconducting Microwave Device Arrays

Authors: Jennifer Pearl Smith, Benjamin A. Mazin, Alex B. Walter, Miguel Daal, J. I. Bailey, III, Clinton Bockstiegel, Nicholas Zobrist, Noah Swimmer, Sarah Steiger, Neelay Fruitwala

Abstract: Superconducting electronics often require high-density microwave interconnects capable of transporting signals between temperature stages with minimal loss, cross talk, and heat conduction. We report the design and fabrication of superconducting 53 wt% Nb-47 wt% Ti (Nb47Ti) FLexible coAXial ribbon cables (FLAX). The ten traces each consist of a 0.076 mm O.D. NbTi inner conductor insulated with PFA… ▽ More Superconducting electronics often require high-density microwave interconnects capable of transporting signals between temperature stages with minimal loss, cross talk, and heat conduction. We report the design and fabrication of superconducting 53 wt% Nb-47 wt% Ti (Nb47Ti) FLexible coAXial ribbon cables (FLAX). The ten traces each consist of a 0.076 mm O.D. NbTi inner conductor insulated with PFA (0.28 mm O.D.) and sheathed in a shared 0.025 mm thick Nb47Ti outer conductor. The cable is terminated with G3PO coaxial push-on connectors via stainless steel capillary tubing (1.6 mm O.D., 0.13 mm thick) soldered to a coplanar wave guide transition board. The 30 cm long cable has 1 dB of loss at 8 GHz with -60 dB nearest-neighbor forward cross talk. The loss is 0.5 dB more than commercially available superconducting coax likely due to impedance mismatches caused by manufacturing imperfections in the cable. The reported cross talk is 30 dB lower than previously developed laminated NbTi-onKapton microstrip cables. We estimate the heat load from 1 K to 90 mK to be 20 nW per trace, approximately half the computed load from the smallest commercially available superconducting coax from CryoCoax △ Less

Submitted 13 July, 2020; originally announced July 2020.

Comments: in IEEE Transactions on Applied Superconductivity

Design and Performance of Hafnium Optical and Near-IR Kinetic Inductance Detectors

Authors: Nicholas Zobrist, Grégoire Coiffard, Bruce Bumble, Noah Swimmer, Sarah Steiger, Miguel Daal, Giulia Collura, Alex B. Walter, Clint Bockstiegel, Neelay Fruitwala, Isabel Lipartito, Benjamin A. Mazin

Abstract: We report on the design and performance of Microwave Kinetic Inductance Detectors (MKIDs) sensitive to single photons in the optical to near-infrared range using hafnium as the sensor material. Our test device had a superconducting transition temperature of 395 mK and a room temperature normal state resistivity of 97 $μΩ$ cm with an RRR = 1.6. Resonators on the device displayed internal quality fa… ▽ More We report on the design and performance of Microwave Kinetic Inductance Detectors (MKIDs) sensitive to single photons in the optical to near-infrared range using hafnium as the sensor material. Our test device had a superconducting transition temperature of 395 mK and a room temperature normal state resistivity of 97 $μΩ$ cm with an RRR = 1.6. Resonators on the device displayed internal quality factors of around 200,000. Similar to the analysis of MKIDs made from other highly resistive superconductors, we find that modeling the temperature response of the detector requires an extra broadening parameter in the superconducting density of states. Finally, we show that this material and design is compatible with a full-array fabrication process which resulted in pixels with decay times of about 40 $μ$s and resolving powers of ~9 at 800 nm. △ Less

Submitted 14 November, 2019; originally announced November 2019.

Optical and Near-IR Microwave Kinetic Inductance Detectors (MKIDs) in the 2020s

Authors: Benjamin A. Mazin, Jeb Bailey, Jo Bartlett, Clint Bockstiegel, Bruce Bumble, Gregoire Coiffard, Thayne Currie, Miguel Daal, Kristina Davis, Rupert Dodkins, Neelay Fruitwala, Nemanja Jovanovic, Isabel Lipartito, Julien Lozi, Jared Males, Dimitri Mawet, Seth Meeker, Kieran O'Brien, Michael Rich, Jenny Smith, Sarah Steiger, Noah Swimmer, Alex Walter, Nick Zobrist, Jonas Zmuidzinas

Abstract: Optical and near-IR Microwave Kinetic Inductance Detectors, or MKIDs, are superconducting photon counting detectors capable of measuring the energy and arrival time of individual OIR photons without read noise or dark current. In this whitepaper we will discuss the current status of OIR MKIDs and MKID-based instruments. Optical and near-IR Microwave Kinetic Inductance Detectors, or MKIDs, are superconducting photon counting detectors capable of measuring the energy and arrival time of individual OIR photons without read noise or dark current. In this whitepaper we will discuss the current status of OIR MKIDs and MKID-based instruments. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: Astro2020 APC Whitepaper. 16 pages, 10 figures

Stochastic Speckle Discrimination with Time-Tagged Photon Lists: Digging Below the Speckle Noise Floor

Authors: Alex B. Walter, Clinton Bockstiegel, Timothy D. Brandt, Benjamin A. Mazin

Abstract: We present an algorithm that uses the distribution of photon arrival times to distinguish speckles from incoherent sources, like planets and disks, in high contrast images. Using simulated data, we show that our approach can overcome the noise limit from fluctuating speckle intensity. The algorithm is likely to be most advantageous when a coronagraph limits the coherent diffraction pattern in the… ▽ More We present an algorithm that uses the distribution of photon arrival times to distinguish speckles from incoherent sources, like planets and disks, in high contrast images. Using simulated data, we show that our approach can overcome the noise limit from fluctuating speckle intensity. The algorithm is likely to be most advantageous when a coronagraph limits the coherent diffraction pattern in the image plane but the intensity is still strongly modulated by fast-timescale uncorrected stellar light, for example from atmospheric turbulence. These conditions are common at small inner working angles and will allow probing of exoplanet populations at smaller angular separations. The technique requires a fast science camera that can temporally resolve the speckle fluctuations, and the detection of many photons per speckle decorrelation time. Since the algorithm directly extracts the incoherent light, standard differential imaging post-processing techniques can be performed afterwards to further boost the signal. △ Less

Submitted 7 June, 2019; originally announced June 2019.

Journal ref: PASP, 131, 2019, 114506

SCExAO, an instrument with a dual purpose: perform cutting-edge science and develop new technologies

Authors: Julien Lozi, Olivier Guyon, Nemanja Jovanovic, Sean Goebel, Prashant Pathak, Nour Skaf, Ananya Sahoo, Barnaby Norris, Frantz Martinache, Mamadou N'Diaye, Ben Mazin, Alex B. Walter, Peter Tuthill, Tomoyuki Kudo, Hajime Kawahara, Takayuki Kotani, Michael Ireland, Nick Cvetojevic, Elsa Huby, Sylvestre Lacour, Sebastien Vievard, Tyler D. Groff, Jeffrey K. Chilcote, Jeremy Kasdin, Justin Knight , et al. (9 additional authors not shown)

Abstract: The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is an extremely modular high-contrast instrument installed on the Subaru telescope in Hawaii. SCExAO has a dual purpose. Its position in the northern hemisphere on a 8-meter telescope makes it a prime instrument for the detection and characterization of exoplanets and stellar environments over a large portion of the sky. In addit… ▽ More The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is an extremely modular high-contrast instrument installed on the Subaru telescope in Hawaii. SCExAO has a dual purpose. Its position in the northern hemisphere on a 8-meter telescope makes it a prime instrument for the detection and characterization of exoplanets and stellar environments over a large portion of the sky. In addition, SCExAO's unique design makes it the ideal instrument to test innovative technologies and algorithms quickly in a laboratory setup and subsequently deploy them on-sky. SCExAO benefits from a first stage of wavefront correction with the facility adaptive optics AO188, and splits the 600-2400 nm spectrum towards a variety of modules, in visible and near infrared, optimized for a large range of science cases. The integral field spectrograph CHARIS, with its J, H or K-band high-resolution mode or its broadband low-resolution mode, makes SCExAO a prime instrument for exoplanet detection and characterization. Here we report on the recent developments and scientific results of the SCExAO instrument. Recent upgrades were performed on a number of modules, like the visible polarimetric module VAMPIRES, the high-performance infrared coronagraphs, various wavefront control algorithms, as well as the real-time controller of AO188. The newest addition is the 20k-pixel Microwave Kinetic Inductance Detector (MKIDS) Exoplanet Camera (MEC) that will allow for previously unexplored science and technology developments. MEC, coupled with novel photon-counting speckle control, brings SCExAO closer to the final design of future high-contrast instruments optimized for Giant Segmented Mirror Telescopes (GSMTs). △ Less

Submitted 21 September, 2018; originally announced September 2018.

Comments: 12 pages, 9 figures, conference proceedings (SPIE Astronomical telescopes and instrumentation 2018)

Journal ref: Proceedings Volume 10703, Adaptive Optics Systems VI; 1070359 (2018)

DARKNESS: A Microwave Kinetic Inductance Detector Integral Field Spectrograph for High-Contrast Astronomy

Authors: Seth R. Meeker, Benjamin A. Mazin, Alex B. Walter, Paschal Strader, Neelay Fruitwala, Clint Bockstiegel, Paul Szypryt, Gerhard Ulbricht, Gregoire Coiffard, Bruce Bumble, Gustavo Cancelo, Ted Zmuda, Ken Treptow, Neal Wilcer, Giulia Collura, Rupert Dodkins, Isabel Lipartito, Nicholas Zobrist, Michael Bottom, J. Chris Shelton, Dimitri Mawet, Julian C. van Eyken, Gautam Vasisht, Eugene Serabyn

Abstract: We present DARKNESS (the DARK-speckle Near-infrared Energy-resolving Superconducting Spectrophotometer), the first of several planned integral field spectrographs to use optical/near-infrared Microwave Kinetic Inductance Detectors (MKIDs) for high-contrast imaging. The photon counting and simultaneous low-resolution spectroscopy provided by MKIDs will enable real-time speckle control techniques an… ▽ More We present DARKNESS (the DARK-speckle Near-infrared Energy-resolving Superconducting Spectrophotometer), the first of several planned integral field spectrographs to use optical/near-infrared Microwave Kinetic Inductance Detectors (MKIDs) for high-contrast imaging. The photon counting and simultaneous low-resolution spectroscopy provided by MKIDs will enable real-time speckle control techniques and post-processing speckle suppression at framerates capable of resolving the atmospheric speckles that currently limit high-contrast imaging from the ground. DARKNESS is now operational behind the PALM-3000 extreme adaptive optics system and the Stellar Double Coronagraph at Palomar Observatory. Here we describe the motivation, design, and characterization of the instrument, early on-sky results, and future prospects. △ Less

Submitted 16 April, 2018; v1 submitted 28 March, 2018; originally announced March 2018.

Comments: 17 pages, 17 figures. PASP Published

Journal ref: Publications of the Astronomical Society of the Pacific, Volume 130, Number 988, 065001 (2018)

Large-format platinum silicide microwave kinetic inductance detectors for optical to near-IR astronomy

Authors: P. Szypryt, S. R. Meeker, G. Coiffard, N. Fruitwala, B. Bumble, G. Ulbricht, A. B. Walter, M. Daal, C. Bockstiegel, G. Collura, N. Zobrist, I. Lipartito, B. A. Mazin

Abstract: We have fabricated and characterized 10,000 and 20,440 pixel Microwave Kinetic Inductance Detector (MKID) arrays for the Dark-speckle Near-IR Energy-resolved Superconducting Spectrophotometer (DARKNESS) and the MKID Exoplanet Camera (MEC). These instruments are designed to sit behind adaptive optics systems with the goal of directly imaging exoplanets in a 800-1400 nm band. Previous large optical… ▽ More We have fabricated and characterized 10,000 and 20,440 pixel Microwave Kinetic Inductance Detector (MKID) arrays for the Dark-speckle Near-IR Energy-resolved Superconducting Spectrophotometer (DARKNESS) and the MKID Exoplanet Camera (MEC). These instruments are designed to sit behind adaptive optics systems with the goal of directly imaging exoplanets in a 800-1400 nm band. Previous large optical and near-IR MKID arrays were fabricated using substoichiometric titanium nitride (TiN) on a silicon substrate. These arrays, however, suffered from severe non-uniformities in the TiN critical temperature, causing resonances to shift away from their designed values and lowering usable detector yield. We have begun fabricating DARKNESS and MEC arrays using platinum silicide (PtSi) on sapphire instead of TiN. Not only do these arrays have much higher uniformity than the TiN arrays, resulting in higher pixel yields, they have demonstrated better spectral resolution than TiN MKIDs of similar design. PtSi MKIDs also do not display the hot pixel effects seen when illuminating TiN on silicon MKIDs with photons with wavelengths shorter than 1 um. △ Less

Submitted 19 October, 2017; originally announced October 2017.

Comments: 16 pages, 8 figures, published in Optics Express

Journal ref: Opt. Express 25 (2017) 25894-25909

High Quality Factor Platinum Silicide Microwave Kinetic Inductance Detectors

Authors: P. Szypryt, B. A. Mazin, G. Ulbricht, B. Bumble, S. R. Meeker, C. Bockstiegel, A. B. Walter

Abstract: We report on the development of Microwave Kinetic Inductance Detectors (MKIDs) using platinum silicide as the sensor material. MKIDs are an emerging superconducting detector technology, capable of measuring the arrival times of single photons to better than two microseconds and their energies to around ten percent. Previously, MKIDs have been fabricated using either sub-stoichiometric titanium nit… ▽ More We report on the development of Microwave Kinetic Inductance Detectors (MKIDs) using platinum silicide as the sensor material. MKIDs are an emerging superconducting detector technology, capable of measuring the arrival times of single photons to better than two microseconds and their energies to around ten percent. Previously, MKIDs have been fabricated using either sub-stoichiometric titanium nitride or aluminum, but TiN suffers from spatial inhomogeneities in the superconducting critical temperature and Al has a low kinetic inductance fraction, causing low detector sensitivity. To address these issues, we have instead fabricated PtSi microresonators with superconducting critical temperatures of 944$\pm$12~mK and high internal quality factors ($Q_i \gtrsim 10^6$). These devices show typical quasiparticle lifetimes of $τ_{qp} \approx 30$--$40~μ$s and spectral resolution, $R = λ/ Δλ$, of 8 at 406.6~nm. We compare PtSi MKIDs to those fabricated with TiN and detail the substantial advantages that PtSi MKIDs have to offer. △ Less

Submitted 3 October, 2016; originally announced October 2016.

Comments: 5 pages, 5 figures, accepted by APL

Search for Optical Pulsations in PSR J0337+1715

Authors: M. J. Strader, A. M. Archibald, S. R. Meeker, P. Szypryt, A. B. Walter, J. C. van Eyken, G. Ulbricht, C. Stoughton, B. Bumble, D. L. Kaplan, B. A. Mazin

Abstract: We report on a search for optical pulsations from PSR J0337+1715 at its observed radio pulse period. PSR J0337+1715 is a millisecond pulsar (2.7 ms spin period) in a triple hierarchical system with two white dwarfs, and has a known optical counterpart with g-band magnitude 18. The observations were done with the Array Camera for Optical to Near-IR Spectrophotometry (ARCONS) at the 200" Hale telesc… ▽ More We report on a search for optical pulsations from PSR J0337+1715 at its observed radio pulse period. PSR J0337+1715 is a millisecond pulsar (2.7 ms spin period) in a triple hierarchical system with two white dwarfs, and has a known optical counterpart with g-band magnitude 18. The observations were done with the Array Camera for Optical to Near-IR Spectrophotometry (ARCONS) at the 200" Hale telescope at Palomar Observatory. No significant pulsations were found in the range 4000-11000 angstroms, and we can limit pulsed emission in g-band to be fainter than 25 mag. △ Less

Submitted 16 March, 2016; originally announced March 2016.

Comments: 4 pages, 2 figures, accepted to MNRAS

The ARCONS Pipeline: Data Reduction for MKID Arrays

Authors: J. C. van Eyken, M. J. Strader, A. B. Walter, S. R. Meeker, P. Szypryt, C. Stoughton, K. O'Brien, D. Marsden, N. K. Rice, Y. Lin, B. A. Mazin

Abstract: The Array Camera for Optical to Near-IR Spectrophotometry, or ARCONS, is a camera based on Microwave Kinetic Inductance Detectors (MKIDs), a new technology that has the potential for broad application in astronomy. Using an array of MKIDs, the instrument is able to produce time-resolved imaging and low-resolution spectroscopy constructed from detections of individual photons. The arrival time and… ▽ More The Array Camera for Optical to Near-IR Spectrophotometry, or ARCONS, is a camera based on Microwave Kinetic Inductance Detectors (MKIDs), a new technology that has the potential for broad application in astronomy. Using an array of MKIDs, the instrument is able to produce time-resolved imaging and low-resolution spectroscopy constructed from detections of individual photons. The arrival time and energy of each photon are recorded in a manner similar to X-ray calorimetry, but at higher photon fluxes. The technique works over a very large wavelength range, is free from fundamental read noise and dark-current limitations, and provides microsecond-level timing resolution. Since the instrument reads out all pixels continuously while exposing, there is no loss of active exposure time to readout. The technology requires a different approach to data reduction compared to conventional CCDs. We outline here the prototype data reduction pipeline developed for ARCONS, though many of the principles are also more broadly applicable to energy-resolved photon counting arrays (e.g., transition edge sensors, superconducting tunnel junctions). We describe the pipeline's current status, and the algorithms and techniques employed in taking data from the arrival of photons at the MKID array to the production of images, spectra, and time-resolved light curves. △ Less

Submitted 20 July, 2015; originally announced July 2015.

Comments: 16 pages, 19 figures, pdflatex, accepted for ApJS

Planck 2015 results. XXVI. The Second Planck Catalogue of Compact Sources

Authors: Planck Collaboration, P. A. R. Ade, N. Aghanim, F. Argüeso, M. Arnaud, M. Ashdown, J. Aumont, C. Baccigalupi, A. J. Banday, R. B. Barreiro, N. Bartolo, E. Battaner, C. Beichman, K. Benabed, A. Benoît, A. Benoit-Lévy, J. -P. Bernard, M. Bersanelli, P. Bielewicz, J. J. Bock, H. Böhringer, A. Bonaldi, L. Bonavera, J. R. Bond, J. Borrill , et al. (218 additional authors not shown)

Abstract: The Second Planck Catalogue of Compact Sources is a catalogue of sources detected in single-frequency maps from the full duration of the Planck mission and supersedes previous versions of the Planck compact source catalogues. It consists of compact sources, both Galactic and extragalactic, detected over the entire sky. Compact sources detected in the lower frequency channels are assigned to the PC… ▽ More The Second Planck Catalogue of Compact Sources is a catalogue of sources detected in single-frequency maps from the full duration of the Planck mission and supersedes previous versions of the Planck compact source catalogues. It consists of compact sources, both Galactic and extragalactic, detected over the entire sky. Compact sources detected in the lower frequency channels are assigned to the PCCS2, while at higher frequencies they are assigned to one of two sub-catalogues, the PCCS2 or PCCS2E, depending on their location on the sky. The first of these catalogues covers most of the sky and allows the user to produce subsamples at higher reliabilities than the target 80% integral reliability of the catalogue. The PCCS2E contains sources detected in sky regions where the diffuse emission makes it difficult to quantify the reliability of the detections. Both the PCCS2 and PCCS2E include polarization measurements, in the form of polarized flux densities, or upper limits, and orientation angles for all seven polarization-sensitive Planck channels. The improved data-processing of the full-mission maps and their reduced noise levels allow us to increase the number of objects in the catalogue, improving its completeness for the target 80 % reliability as compared with the previous versions, the PCCS and ERCSC catalogues. △ Less

Submitted 15 February, 2016; v1 submitted 8 July, 2015; originally announced July 2015.

Comments: 39 pages and 33 figures. This paper is one of a set associated with the 2015 data release from Planck. Version accepted by Astronomy and Astrophysics

Highly Multiplexible Thermal Kinetic Inductance Detectors for X-Ray Imaging Spectroscopy

Authors: Gerhard Ulbricht, Benjamin A. Mazin, Paul Szypryt, Alex B. Walter, Clint Bockstiegel, Bruce Bumble

Abstract: For X-ray imaging spectroscopy, high spatial resolution over a large field of view is often as important as high energy resolution, but current X-ray detectors do not provide both in the same device. Thermal Kinetic Inductance Detectors (TKIDs) are being developed as they offer a feasible way to combine the energy resolution of transition edge sensors with pixel counts approaching CCDs and thus pr… ▽ More For X-ray imaging spectroscopy, high spatial resolution over a large field of view is often as important as high energy resolution, but current X-ray detectors do not provide both in the same device. Thermal Kinetic Inductance Detectors (TKIDs) are being developed as they offer a feasible way to combine the energy resolution of transition edge sensors with pixel counts approaching CCDs and thus promise significant improvements for many X-ray spectroscopy applications. TKIDs are a variation of Microwave Kinetic Inductance Detectors (MKIDs) and share their multiplexibility: working MKID arrays with 2024 pixels have recently been demonstrated and much bigger arrays are under development. In this work, we present our first working TKID prototypes which are able to achieve an energy resolution of 75 eV at 5.9 keV, even though their general design still has to be optimized. We further describe TKID fabrication, characterization, multiplexing and working principle and demonstrate the necessity of a data fitting algorithm in order to extract photon energies. With further design optimizations we expect to be able to improve our TKID energy resolution to less than 10 eV at 5.9 keV. △ Less

Submitted 24 June, 2015; originally announced June 2015.

Comments: 7 pages, 4 figures, accepted for publication in Applied Physics Letters

Absolute Calibration of the Radio Astronomy Flux Density Scale at 22 to 43 GHz Using Planck

Authors: B. Partridge, M. López-Caniego, R. A. Perley, J. Stevens, B. J. Butler, G. Rocha, B. Walter, A. Zacchei

Abstract: The Planck mission detected thousands of extragalactic radio sources at frequencies from 28 to 857 GHz. Planck's calibration is absolute (in the sense that it is based on the satellite's annual motion around the Sun and the temperature of the cosmic microwave background), and its beams are well characterized at sub-percent levels. Thus Planck's flux density measurements of compact sources are abso… ▽ More The Planck mission detected thousands of extragalactic radio sources at frequencies from 28 to 857 GHz. Planck's calibration is absolute (in the sense that it is based on the satellite's annual motion around the Sun and the temperature of the cosmic microwave background), and its beams are well characterized at sub-percent levels. Thus Planck's flux density measurements of compact sources are absolute in the same sense. We have made coordinated VLA and ATCA observations of 65 strong, unresolved Planck sources in order to transfer Planck's calibration to ground-based instruments at 22, 28, and 43 GHz. The results are compared to microwave flux density scales currently based on planetary observations. Despite the scatter introduced by the variability of many of the sources, the flux density scales are determined to 1-2% accuracy. At 28 GHz, the flux density scale used by the VLA runs 3.6% +- 1.0% below Planck values; at 43 GHz, the discrepancy increases to 6.2% +- 1.4% for both ATCA and the VLA. △ Less

Submitted 15 February, 2016; v1 submitted 9 June, 2015; originally announced June 2015.

Comments: 16 pages, 4 figures and 4 tables

Planck 2015 results. I. Overview of products and scientific results

Authors: Planck Collaboration, R. Adam, P. A. R. Ade, N. Aghanim, Y. Akrami, M. I. R. Alves, M. Arnaud, F. Arroja, J. Aumont, C. Baccigalupi, M. Ballardini, A. J. Banday, R. B. Barreiro, J. G. Bartlett, N. Bartolo, S. Basak, P. Battaglia, E. Battaner, R. Battye, K. Benabed, A. Benoît, A. Benoit-Lévy, J. -P. Bernard, M. Bersanelli, B. Bertincourt , et al. (330 additional authors not shown)

Abstract: The European Space Agency's Planck satellite, dedicated to studying the early Universe and its subsequent evolution, was launched 14~May 2009 and scanned the microwave and submillimetre sky continuously between 12~August 2009 and 23~October 2013. In February~2015, ESA and the Planck Collaboration released the second set of cosmology products based on data from the entire Planck mission, including… ▽ More The European Space Agency's Planck satellite, dedicated to studying the early Universe and its subsequent evolution, was launched 14~May 2009 and scanned the microwave and submillimetre sky continuously between 12~August 2009 and 23~October 2013. In February~2015, ESA and the Planck Collaboration released the second set of cosmology products based on data from the entire Planck mission, including both temperature and polarization, along with a set of scientific and technical papers and a web-based explanatory supplement. This paper gives an overview of the main characteristics of the data and the data products in the release, as well as the associated cosmological and astrophysical science results and papers. The science products include maps of the cosmic microwave background (CMB), the thermal Sunyaev-Zeldovich effect, and diffuse foregrounds in temperature and polarization, catalogues of compact Galactic and extragalactic sources (including separate catalogues of Sunyaev-Zeldovich clusters and Galactic cold clumps), and extensive simulations of signals and noise used in assessing the performance of the analysis methods and assessment of uncertainties. The likelihood code used to assess cosmological models against the Planck data are described, as well as a CMB lensing likelihood. Scientific results include cosmological parameters deriving from CMB power spectra, gravitational lensing, and cluster counts, as well as constraints on inflation, non-Gaussianity, primordial magnetic fields, dark energy, and modified gravity. △ Less

Submitted 9 August, 2015; v1 submitted 5 February, 2015; originally announced February 2015.

Comments: 40 pages, 24 figures

The Atacama Cosmology Telescope: Cross Correlation with Planck maps

Authors: Thibaut Louis, Graeme E. Addison, Matthew Hasselfield, J Richard Bond, Erminia Calabrese, Sudeep Das, Mark J. Devlin, Joanna Dunkley, Rolando Dünner, Megan Gralla, Amir Hajian, Adam D. Hincks, Renée Hlozek, Kevin Huffenberger, Leopoldo Infante, Arthur Kosowsky, Tobias A. Marriage, Kavilan Moodley, Sigurd Næss, Michael D. Niemack, Michael R. Nolta, Lyman A. Page, Bruce Partridge, Neelima Sehgal, Jonathan L. Sievers , et al. (4 additional authors not shown)

Abstract: We present the temperature power spectrum of the Cosmic Microwave Background obtained by cross-correlating maps from the Atacama Cosmology Telescope (ACT) at 148 and 218 GHz with maps from the Planck satellite at 143 and 217 GHz, in two overlapping regions covering 592 square degrees. We find excellent agreement between the two datasets at both frequencies, quantified using the variance of the res… ▽ More We present the temperature power spectrum of the Cosmic Microwave Background obtained by cross-correlating maps from the Atacama Cosmology Telescope (ACT) at 148 and 218 GHz with maps from the Planck satellite at 143 and 217 GHz, in two overlapping regions covering 592 square degrees. We find excellent agreement between the two datasets at both frequencies, quantified using the variance of the residuals between the ACT power spectra and the ACTxPlanck cross-spectra. We use these cross-correlations to calibrate the ACT data at 148 and 218 GHz, to 0.7% and 2% precision respectively. We find no evidence for anisotropy in the calibration parameter. We compare the Planck 353 GHz power spectrum with the measured amplitudes of dust and cosmic infrared background (CIB) of ACT data at 148 and 218 GHz. We also compare planet and point source measurements from the two experiments. △ Less

Submitted 3 March, 2014; originally announced March 2014.

Comments: 9 pages, 8 figures

Direct Detection of SDSS J0926+3624 Orbital Expansion with ARCONS

Authors: P. Szypryt, G. E. Duggan, B. A. Mazin, S. R. Meeker, M. J. Strader, J. C. van Eyken, D. Marsden, K. O'Brien, A. B. Walter, G. Ulbricht, T. A. Prince, C. Stoughton, B. Bumble

Abstract: AM Canum Venaticorum (AM CVn) stars belong to a class of ultra-compact, short period binaries with spectra dominated largely by helium. SDSS J0926+3624 is of particular interest as it is the first observed eclipsing AM CVn system. We observed SDSS J0926+3624 with the \textbf{Ar}ray \textbf{C}amera for \textbf{O}ptical to \textbf{N}ear-IR \textbf{S}pectrophotometry (ARCONS) at the Palomar 200" tele… ▽ More AM Canum Venaticorum (AM CVn) stars belong to a class of ultra-compact, short period binaries with spectra dominated largely by helium. SDSS J0926+3624 is of particular interest as it is the first observed eclipsing AM CVn system. We observed SDSS J0926+3624 with the \textbf{Ar}ray \textbf{C}amera for \textbf{O}ptical to \textbf{N}ear-IR \textbf{S}pectrophotometry (ARCONS) at the Palomar 200" telescope. ARCONS uses a relatively new type of energy-resolved photon counters called Microwave Kinetic Inductance Detectors (MKIDs). ARCONS, sensitive to radiation from 350 to 1100 nm, has a time resolution of several microseconds and can measure the energy of a photon to $\sim10%$. We present the light curves for these observations and examine changes in orbital period from prior observations. Using a quadratic ephemeris model, we measure a period rate of change $\dot{P} = (3.07 \pm 0.56)\times 10^{-13}$. In addition, we use the high timing resolution of ARCONS to examine the system's high frequency variations and search for possible quasi-periodic oscillations (QPOs). Finally, we use the instrument's spectral resolution to examine the light curves in various wavelength bands. We do not find any high frequency QPOs or significant spectral variability throughout an eclipse. △ Less

Submitted 16 September, 2013; originally announced September 2013.

Comments: 8 pages, 7 figures, submitted to MNRAS

Excess Optical Enhancement Observed with ARCONS for Early Crab Giant Pulses

Authors: M. J. Strader, M. D. Johnson, B. A. Mazin, G. V. Spiro Jaeger, C. R. Gwinn, S. R. Meeker, P. Szypryt, J. C. van Eyken, D. Marsden, K. O'Brien, A. B. Walter, G. Ulbricht, C. Stoughton, B. Bumble

Abstract: We observe an extraordinary link in the Crab pulsar between the enhancement of an optical pulse and the timing of the corresponding giant radio pulse. At optical through infrared wavelengths, our observations use the high time resolution of ARCONS, a unique superconducting energy-resolving photon-counting array at the Palomar 200-inch telescope. At radio wavelengths, we observe with the Robert C.… ▽ More We observe an extraordinary link in the Crab pulsar between the enhancement of an optical pulse and the timing of the corresponding giant radio pulse. At optical through infrared wavelengths, our observations use the high time resolution of ARCONS, a unique superconducting energy-resolving photon-counting array at the Palomar 200-inch telescope. At radio wavelengths, we observe with the Robert C. Byrd Green Bank Telescope and the GUPPI backend. We see an $11.3\pm2.5\%$ increase in peak optical flux for pulses that have an accompanying giant radio pulse arriving near the peak of the optical main pulse, in contrast to a $3.2\pm0.5\%$ increase when an accompanying giant radio pulse arrives soon after the optical peak. We also observe that the peak of the optical main pulse is $2.8\pm0.8\%$ enhanced when there is a giant radio pulse accompanying the optical interpulse. We observe no statistically significant spectral differences between optical pulses accompanied by and not accompanied by giant radio pulses. Our results extend previous observations of optical-radio correlation to the time and spectral domains. Our refined temporal correlation suggests that optical and radio emission are indeed causally linked, and the lack of spectral differences suggests that the same mechanism is responsible for all optical emission. △ Less

Submitted 8 November, 2013; v1 submitted 12 September, 2013; originally announced September 2013.

Comments: 5 pages, 5 figures. Updated to match revised version, accepted to ApJL Nov 7, 2013. Several additions and improved DM in timing solution

Journal ref: Astrophys. J. Lett. 779, L12 (2013)

ARCONS: A 2024 Pixel Optical through Near-IR Cryogenic Imaging Spectrophotometer

Authors: B. A. Mazin, S. R. Meeker, M. J. Strader, B. Bumble, K. O'Brien, P. Szypryt, D. Marsden, J. C. van Eyken, G. E. Duggan, G. Ulbricht, C. Stoughton, M. Johnson

Abstract: We present the design, construction, and commissioning results of ARCONS, the Array Camera for Optical to Near-IR Spectrophotometry. ARCONS is the first ground-based instrument in the optical through near-IR wavelength range based on Microwave Kinetic Inductance Detectors (MKIDs). MKIDs are revolutionary cryogenic detectors, capable of detecting single photons and measuring their energy without fi… ▽ More We present the design, construction, and commissioning results of ARCONS, the Array Camera for Optical to Near-IR Spectrophotometry. ARCONS is the first ground-based instrument in the optical through near-IR wavelength range based on Microwave Kinetic Inductance Detectors (MKIDs). MKIDs are revolutionary cryogenic detectors, capable of detecting single photons and measuring their energy without filters or gratings, similar to an X-ray microcalorimeter. MKIDs are nearly ideal, noiseless photon detectors, as they do not suffer from read noise or dark current and have nearly perfect cosmic ray rejection. ARCONS is an Integral Field Spectrograph (IFS) containing a lens-coupled 2024 pixel MKID array yielding a 20"x20" field of view, and has been deployed on the Palomar 200" and Lick 120" telescopes for 24 nights of observing. We present initial results showing that ARCONS and its MKID arrays are now a fully operational and powerful tool for astronomical observations. △ Less

Submitted 19 June, 2013; originally announced June 2013.

Comments: 12 pages, 16 figures, submitted to PASP

Planck 2013 results. XXVIII. The Planck Catalogue of Compact Sources

Authors: Planck Collaboration, P. A. R. Ade, N. Aghanim, F. Argüeso, C. Armitage-Caplan, M. Arnaud, M. Ashdown, F. Atrio-Barandela, J. Aumont, C. Baccigalupi, A. J. Banday, R. B. Barreiro, J. G. Bartlett, E. Battaner, K. Benabed, A. Benoît, A. Benoit-Lévy, J. -P. Bernard, M. Bersanelli, P. Bielewicz, J. Bobin, J. J. Bock, A. Bonaldi, L. Bonavera, J. R. Bond , et al. (218 additional authors not shown)

Abstract: The Planck Catalogue of Compact Sources (PCCS) is the catalogue of sources detected in the first 15 months of Planck operations, the "nominal" mission. It consists of nine single-frequency catalogues of compact sources, both Galactic and extragalactic, detected over the entire sky. The PCCS covers the frequency range 30--857\,GHz with higher sensitivity (it is 90% complete at 180 mJy in the best c… ▽ More The Planck Catalogue of Compact Sources (PCCS) is the catalogue of sources detected in the first 15 months of Planck operations, the "nominal" mission. It consists of nine single-frequency catalogues of compact sources, both Galactic and extragalactic, detected over the entire sky. The PCCS covers the frequency range 30--857\,GHz with higher sensitivity (it is 90% complete at 180 mJy in the best channel) and better angular resolution (from ~33' to ~5') than previous all-sky surveys in this frequency band. By construction its reliability is >80% and more than 65% of the sources have been detected at least in two contiguous Planck channels. In this paper we present the construction and validation of the PCCS, its contents and its statistical characterization. △ Less

Submitted 25 November, 2013; v1 submitted 20 March, 2013; originally announced March 2013.

Comments: 21 pages, 20 figures, submitted to A&A. This work is one of the papers associated with the 2013 release of data from the Planck mission

Empirical Determination of Convection Parameters in White Dwarfs I : Whole Earth Telescope Observations of EC14012-1446

Authors: J. L. Provencal, M. H. Montgomery, A. Kanaan, S. E. Thompson, J. Dalessio, H. L. Shipman, D. Childers, J. C. Clemens, R. Rosen, P. Henrique, A. Bischoff-Kim, W. Strickland, D. Chandler, B. Walter, T. K. Watson, B. Castanheira, S. Wang, G. Handler, M. Wood, S. Vennes, P. Nemeth, S. O. Kepler, M. Reed, A. Nitta, S. J. Kleinman , et al. (33 additional authors not shown)

Abstract: We report on analysis of 308.3 hrs of high speed photometry targeting the pulsating DA white dwarf EC14012-1446. The data were acquired with the Whole Earth Telescope (WET) during the 2008 international observing run XCOV26. The Fourier transform of the light curve contains 19 independent frequencies and numerous combination frequencies. The dominant peaks are 1633.907, 1887.404, and 2504.897 micr… ▽ More We report on analysis of 308.3 hrs of high speed photometry targeting the pulsating DA white dwarf EC14012-1446. The data were acquired with the Whole Earth Telescope (WET) during the 2008 international observing run XCOV26. The Fourier transform of the light curve contains 19 independent frequencies and numerous combination frequencies. The dominant peaks are 1633.907, 1887.404, and 2504.897 microHz. Our analysis of the combination amplitudes reveals that the parent frequencies are consistent with modes of spherical degree l=1. The combination amplitudes also provide m identifications for the largest amplitude parent frequencies. Our seismology analysis, which includes 2004--2007 archival data, confirms these identifications, provides constraints on additional frequencies, and finds an average period spacing of 41 s. Building on this foundation, we present nonlinear fits to high signal-to-noise light curves from the SOAR 4.1m, McDonald 2.1m, and KPNO 2m telescopes. The fits indicate a time-averaged convective response timescale of 99.4 +/- 17 s, a temperature exponent 85 +/- 6.2 and an inclination angle of 32.9 +/- 3.2 degrees. We present our current empirical map of the convective response timescale across the DA instability strip. △ Less

Submitted 11 April, 2012; originally announced April 2012.

Comments: Accepted for publication in the Astrophysical Journal