Showing 1–50 of 121 results for author: Watanabe, S

Microscale Hydrogen, Carbon, and Nitrogen Isotopic Diversity of Organic Matter in Asteroid Ryugu

Authors: Larry R Nittler, Jens Barosch, Katherine Burgess, Rhonda M Stroud, Jianhua Wang, Hikaru Yabuta, Yuma Enokido, Megumi Matsumoto, Tomoki Nakamura, Yoko Kebukawa, Shohei Yamashita, Yoshio Takahashi, Laure Bejach, Lydie Bonal, George D Cody, Emmanuel Dartois, Alexandre Dazzi, Bradley De Gregorio, Ariane Deniset-Besseau, Jean Duprat, Cécile Engrand, Minako Hashiguchi, A. L. David Kilcoyne, Mutsumi Komatsu, Zita Martins , et al. (35 additional authors not shown)

Abstract: We report the H, C, and N isotopic compositions of microscale (0.2 to 2$μ$m) organic matter in samples of asteroid Ryugu and the Orgueil CI carbonaceous chondrite. Three regolith particles of asteroid Ryugu, returned by the Hayabusa2 spacecraft, and several fragments of Orgueil were analyzed by NanoSIMS isotopic imaging. The isotopic distributions of the Ryugu samples from two different collection… ▽ More We report the H, C, and N isotopic compositions of microscale (0.2 to 2$μ$m) organic matter in samples of asteroid Ryugu and the Orgueil CI carbonaceous chondrite. Three regolith particles of asteroid Ryugu, returned by the Hayabusa2 spacecraft, and several fragments of Orgueil were analyzed by NanoSIMS isotopic imaging. The isotopic distributions of the Ryugu samples from two different collection spots are closely similar to each other and to the Orgueil samples, strengthening the proposed Ryugu-CI chondrite connection. Most individual sub-$μ$m organic grains have isotopic compositions within error of bulk values, but 2-8% of them are outliers exhibiting large isotopic enrichments or depletions in D, $^{15}$N, and/or $^{13}$C. The H, C and N isotopic compositions of the outliers are not correlated with each other: while some C-rich grains are both D- and $^{15}$N-enriched, many are enriched or depleted in one or the other system. This most likely points to a diversity in isotopic fractionation pathways and thus diversity in the local formation environments for the individual outlier grains. The observation of a relatively small population of isotopic outlier grains can be explained either by escape from nebular and/or parent body homogenization of carbonaceous precursor material or addition of later isotopic outlier grains. The strong chemical similarity of isotopically typical and isotopically outlying grains, as reflected by synchrotron x-ray absorption spectra, suggests a genetic connection and thus favors the former, homogenization scenario. However, the fact that even the least altered meteorites show the same pattern of a small population of outliers on top of a larger population of homogenized grains indicates that some or most of the homogenization occurred prior to accretion of the macromolecular organic grains into asteroidal parent bodies. △ Less

Submitted 12 April, 2024; originally announced April 2024.

Comments: Accepted for publication in Earth and Planetary Science Letters. 8 figures (plus 3 supplementary figs), two tables

Development of a data overflow protection system for Super-Kamiokande to maximize data from nearby supernovae

Authors: M. Mori, K. Abe, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nakano, M. Nakahata, S. Nakayama, Y. Noguchi, K. Okamoto, K. Sato, H. Sekiya, H. Shiba, K. Shimizu , et al. (230 additional authors not shown)

Abstract: Neutrinos from very nearby supernovae, such as Betelgeuse, are expected to generate more than ten million events over 10\,s in Super-Kamokande (SK). At such large event rates, the buffers of the SK analog-to-digital conversion board (QBEE) will overflow, causing random loss of data that is critical for understanding the dynamics of the supernova explosion mechanism. In order to solve this problem,… ▽ More Neutrinos from very nearby supernovae, such as Betelgeuse, are expected to generate more than ten million events over 10\,s in Super-Kamokande (SK). At such large event rates, the buffers of the SK analog-to-digital conversion board (QBEE) will overflow, causing random loss of data that is critical for understanding the dynamics of the supernova explosion mechanism. In order to solve this problem, two new DAQ modules were developed to aid in the observation of very nearby supernovae. The first of these, the SN module, is designed to save only the number of hit PMTs during a supernova burst and the second, the Veto module, prescales the high rate neutrino events to prevent the QBEE from overflowing based on information from the SN module. In the event of a very nearby supernova, these modules allow SK to reconstruct the time evolution of the neutrino event rate from beginning to end using both QBEE and SN module data. This paper presents the development and testing of these modules together with an analysis of supernova-like data generated with a flashing laser diode. We demonstrate that the Veto module successfully prevents DAQ overflows for Betelgeuse-like supernovae as well as the long-term stability of the new modules. During normal running the Veto module is found to issue DAQ vetos a few times per month resulting in a total dead time less than 1\,ms, and does not influence ordinary operations. Additionally, using simulation data we find that supernovae closer than 800~pc will trigger Veto module resulting in a prescaling of the observed neutrino data. △ Less

Submitted 12 April, 2024; originally announced April 2024.

Comments: 28 pages, 18 figures. Submitted to PTEP

Measurements of the charge ratio and polarization of cosmic-ray muons with the Super-Kamiokande detector

Authors: H. Kitagawa, T. Tada, K. Abe, C. Bronner, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nakano, M. Nakahata, S. Nakayama, Y. Noguchi, K. Okamoto, K. Sato, H. Sekiya , et al. (231 additional authors not shown)

Abstract: We present the results of the charge ratio ($R$) and polarization ($P^μ_{0}$) measurements using the decay electron events collected from 2008 September to 2022 June by the Super-Kamiokande detector. Because of its underground location and long operation, we performed high precision measurements by accumulating cosmic-ray muons. We measured the muon charge ratio to be $R=1.32 \pm 0.02$… ▽ More We present the results of the charge ratio ($R$) and polarization ($P^μ_{0}$) measurements using the decay electron events collected from 2008 September to 2022 June by the Super-Kamiokande detector. Because of its underground location and long operation, we performed high precision measurements by accumulating cosmic-ray muons. We measured the muon charge ratio to be $R=1.32 \pm 0.02$ $(\mathrm{stat.}{+}\mathrm{syst.})$ at $E_μ\cos θ_{\mathrm{Zenith}}=0.7^{+0.3}_{-0.2}$ $\mathrm{TeV}$, where $E_μ$ is the muon energy and $θ_{\mathrm{Zenith}}$ is the zenith angle of incoming cosmic-ray muons. This result is consistent with the Honda flux model while this suggests a tension with the $πK$ model of $1.9σ$. We also measured the muon polarization at the production location to be $P^μ_{0}=0.52 \pm 0.02$ $(\mathrm{stat.}{+}\mathrm{syst.})$ at the muon momentum of $0.9^{+0.6}_{-0.1}$ $\mathrm{TeV}/c$ at the surface of the mountain; this also suggests a tension with the Honda flux model of $1.5σ$. This is the most precise measurement ever to experimentally determine the cosmic-ray muon polarization near $1~\mathrm{TeV}/c$. These measurement results are useful to improve the atmospheric neutrino simulations. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 29 pages, 45 figures

FOXSI-2: Upgrades of the Focusing Optics X-ray Solar Imager for its Second Flight

Authors: Steven Christe, Lindsay Glesener, Camilo Buitrago-Casas, Shin-Nosuke Ishikawa, Brian Ramsey, Mikhail Gubarev, Kiranmayee Kilaru, Jeffery J. Kolodziejczak, Shin Watanabe, Tadayuki Takahashi, Hiroyasu Tajima, Paul Turin, Van Shourt, Natalie Foster, Sam Krucker

Abstract: The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket payload flew for the second time on 2014 December 11. To enable direct Hard X-Ray (HXR) imaging spectroscopy, FOXSI makes use of grazing-incidence replicated focusing optics combined with fine-pitch solid-state detectors. FOXSI's first flight provided the first HXR focused images of the Sun. For FOXSI's second flight several updates we… ▽ More The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket payload flew for the second time on 2014 December 11. To enable direct Hard X-Ray (HXR) imaging spectroscopy, FOXSI makes use of grazing-incidence replicated focusing optics combined with fine-pitch solid-state detectors. FOXSI's first flight provided the first HXR focused images of the Sun. For FOXSI's second flight several updates were made to the instrument including updating the optics and detectors as well as adding a new Solar Aspect and Alignment System (SAAS). This paper provides an overview of these updates as well as a discussion of their measured performance. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Comments: 12 pages, 10 figures, 3 tables

Report number: Vol. 5, No. 1 (2016) 1640005 (12 pages)

Journal ref: Journal of Astronomical Instrumentation, 2016, Volume 05, Number 01, 1640005

Demonstration of nuclear gamma-ray polarimetry based on a multi-layer CdTe Compton Camera

Authors: S. Go, Y. Tsuzuki, H. Yoneda, Y. Ichikawa, T. Ikeda, N. Imai, K. Imamura, M. Niikura, D. Nishimura, R. Mizuno, S. Takeda, H. Ueno, S. Watanabe, T. Y. Saito, S. Shimoura, S. Sugawara, A. Takamine, T. Takahashi

Abstract: To detect and track structural changes in atomic nuclei, the systematic study of nuclear levels with firm spin-parity assignments is important. While linear polarization measurements have been applied to determine the electromagnetic character of gamma-ray transitions, the applicable range is strongly limited due to the low efficiency of the detection system. The multi-layer Cadmium-Telluride (CdT… ▽ More To detect and track structural changes in atomic nuclei, the systematic study of nuclear levels with firm spin-parity assignments is important. While linear polarization measurements have been applied to determine the electromagnetic character of gamma-ray transitions, the applicable range is strongly limited due to the low efficiency of the detection system. The multi-layer Cadmium-Telluride (CdTe) Compton camera can be a state-of-the-art gamma-ray polarimeter for nuclear spectroscopy with the high position sensitivity and the detection efficiency. We demonstrated the capability to operate this detector as a reliable gamma-ray polarimeter by using polarized 847-keV gamma rays produced by the $^{56}\rm{Fe}({\it p},{\it p'}γ)$ reaction. By combining the experimental data and simulated calculations, the modulation curve for the gamma ray was successfully obtained. A remarkably high polarization sensitivity was achieved, compatible with a reasonable detection efficiency. Based on the obtained results, a possible future gamma-ray polarimetery is discussed. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Journal ref: Scientific Reports volume 14, Article number: 2573 (2024)

2-mm-Thick Large-Area CdTe Double-sided Strip Detectors for High-Resolution Spectroscopic Imaging of X-ray and Gamma-ray with Depth-Of-Interaction Sensing

Authors: Takahiro Minami, Miho Katsuragawa, Shunsaku Nagasawa, Shin'ichiro Takeda, Shin Watanabe, Yutaka Tsuzuki, Tadayuki Takahashi

Abstract: We developed a 2-mm-thick CdTe double-sided strip detector (CdTe-DSD) with a 250 um strip pitch, which has high spatial resolution with a uniform large imaging area of 10 cm$^2$ and high energy resolution with high detection efficiency in tens to hundreds keV. The detector can be employed in a wide variety of fields for quantitative observations of hard X-ray and soft gamma-ray with spectroscopic… ▽ More We developed a 2-mm-thick CdTe double-sided strip detector (CdTe-DSD) with a 250 um strip pitch, which has high spatial resolution with a uniform large imaging area of 10 cm$^2$ and high energy resolution with high detection efficiency in tens to hundreds keV. The detector can be employed in a wide variety of fields for quantitative observations of hard X-ray and soft gamma-ray with spectroscopic imaging, for example, space observation, nuclear medicine, and non-destructive elemental analysis. This detector is thicker than the 0.75-mm-thick one previously developed by a factor of $\sim$2.7, thus providing better detection efficiency for hard X-rays and soft gamma rays. The increased thickness could potentially enhance bias-induced polarization if we do not apply sufficient bias and if we do not operate at a low temperature, but the polarization is not evident in our detector when a high voltage of 500 V is applied to the CdTe diode and the temperature is maintained at -20 $^\circ$C during one-day experiments. The ''Depth Of Interaction'' (DOI) dependence due to the CdTe diode's poor carrier-transport property is also more significant, resulting in much DOI information while complicated detector responses such as charge sharings or low-energy tails that exacerbate the loss in the energy resolution. In this paper, we developed 2-mm-thick CdTe-DSDs, studied their response, and evaluated their energy resolution, spatial resolution, and uniformity. We also constructed a theoretical model to understand the detector response theoretically, resulting in reconstructing the DOI with an accuracy of 100 um while estimating the carrier-transport property. We realized the detector that has high energy resolution and high 3D spatial resolution with a uniform large imaging area. △ Less

Submitted 17 December, 2023; v1 submitted 13 December, 2023; originally announced December 2023.

Comments: 13 pages, 11 figures, 1 table, Accepted for publication in NIM A

Search for astrophysical electron antineutrinos in Super-Kamiokande with 0.01wt% gadolinium-loaded water

Authors: M. Harada, K. Abe, C. Bronner, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nakano, M. Nakahata, S. Nakayama, Y. Noguchi, K. Okamoto, K. Sato, H. Sekiya, H. Shiba , et al. (216 additional authors not shown)

Abstract: We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay w… ▽ More We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay with efficient background rejection and higher signal efficiency thanks to the high efficiency of the neutron tagging technique. In this paper, we report the result for the initial stage of SK-Gd with a $22.5\times552$ $\rm kton\cdot day$ exposure at 0.01% Gd mass concentration. No significant excess over the expected background in the observed events is found for the neutrino energies below 31.3 MeV. Thus, the flux upper limits are placed at the 90% confidence level. The limits and sensitivities are already comparable with the previous SK result with pure-water ($22.5 \times 2970 \rm kton\cdot day$) owing to the enhanced neutron tagging. △ Less

Submitted 30 May, 2023; v1 submitted 8 May, 2023; originally announced May 2023.

Gas selection for Xe-based LCP-GEM detectors onboard the CubeSat X-ray observatory NinjaSat

Authors: T. Takeda, T. Tamagawa, T. Enoto, T. Kitaguchi, Y. Kato, T. Mihara, W. Iwakiri, M. Numazawa, Y. Zhou, K. Uchiyama, Y. Yoshida, N. Ota, S. Hayashi, S. Watanabe, A. Jujo, H. Sato, C. P. Hu, H. Takahashi, H. Odaka, T. Tamba, K. Taniguchi

Abstract: We present a gas selection for Xe-based gas electron multiplier (GEM) detectors, Gas Multiplier Counters (GMCs) onboard the CubeSat X-ray observatory NinjaSat. To achieve an energy bandpass of 2-50 keV, we decided to use a Xe-based gas mixture at a pressure of 1.2 atm that is sensitive to high-energy X-rays. In addition, an effective gain of over 300 is required for a single GEM so that the 2 keV… ▽ More We present a gas selection for Xe-based gas electron multiplier (GEM) detectors, Gas Multiplier Counters (GMCs) onboard the CubeSat X-ray observatory NinjaSat. To achieve an energy bandpass of 2-50 keV, we decided to use a Xe-based gas mixture at a pressure of 1.2 atm that is sensitive to high-energy X-rays. In addition, an effective gain of over 300 is required for a single GEM so that the 2 keV X-ray signal can be sufficiently larger than the electrical noise. At first, we measured the effective gains of GEM in nine Xe-based gas mixtures (combinations of Xe, Ar, CO2, CH4, and dimethyl ether; DME) at 1.0 atm. The highest gains were obtained with Xe/Ar/DME mixtures, while relatively lower gains were obtained with Xe/Ar/CO2, Xe/Ar/CH4, and Xe+quencher mixtures. Based on these results, we selected the Xe/Ar/DME (75%/24%/1%) mixture at 1.2 atm as the sealed gas for GMC. Then we investigated the dependence of an effective gain on the electric fields in the drift and induction gaps ranging from 100-650 V cm$^{-1}$ and 500-5000 V cm$^{-1}$, respectively, in the selected gas mixture. The effective gain weakly depended on the drift field while it was almost linearly proportional to the induction field: 2.4 times higher at 5000 V cm$^{-1}$ than at 1000 V cm$^{-1}$. With the optimal induction and drift fields, the flight model GMC achieves an effective gain of 460 with an applied GEM voltage of 590 V. △ Less

Submitted 19 June, 2023; v1 submitted 17 April, 2023; originally announced April 2023.

Comments: 7th international conference on Micro Pattern Gaseous Detectors 2022 - MPGD2022, 3 pages, 2 figures

A broadband X-ray imaging spectroscopy in the 2030s: the FORCE mission

Authors: Koji Mori, Takeshi G. Tsuru, Kazuhiro Nakazawa, Yoshihiro Ueda, Shin Watanabe, Takaaki Tanaka, Manabu Ishida, Hironori Matsumoto, Hisamitsu Awaki, Hiroshi Murakami, Masayoshi Nobukawa, Ayaki Takeda, Yasushi Fukazawa, Hiroshi Tsunemi, Tadayuki Takahashi, Ann Hornschemeier, Takashi Okajima, William W. Zhang, Brian J. Williams, Tonia Venters, Kristin Madsen, Mihoko Yukita, Hiroki Akamatsu, Aya Bamba, Teruaki Enoto , et al. (27 additional authors not shown)

Abstract: In this multi-messenger astronomy era, all the observational probes are improving their sensitivities and overall performance. The Focusing on Relativistic universe and Cosmic Evolution (FORCE) mission, the product of a JAXA/NASA collaboration, will reach a 10 times higher sensitivity in the hard X-ray band ($E >$ 10~keV) in comparison with any previous hard X-ray missions, and provide simultaneou… ▽ More In this multi-messenger astronomy era, all the observational probes are improving their sensitivities and overall performance. The Focusing on Relativistic universe and Cosmic Evolution (FORCE) mission, the product of a JAXA/NASA collaboration, will reach a 10 times higher sensitivity in the hard X-ray band ($E >$ 10~keV) in comparison with any previous hard X-ray missions, and provide simultaneous soft X-ray coverage. FORCE aims to be launched in the early 2030s, providing a perfect hard X-ray complement to the ESA flagship mission Athena. FORCE will be the most powerful X-ray probe for discovering obscured/hidden black holes and studying high energy particle acceleration in our Universe and will address how relativistic processes in the universe are realized and how these affect cosmic evolution. FORCE, which will operate over 1--79 keV, is equipped with two identical pairs of supermirrors and wideband X-ray imagers. The mirror and imager are connected by a high mechanical stiffness extensible optical bench with alignment monitor systems with a focal length of 12~m. A light-weight silicon mirror with multi-layer coating realizes a high angular resolution of $<15''$ in half-power diameter in the broad bandpass. The imager is a hybrid of a brand-new SOI-CMOS silicon-pixel detector and a CdTe detector responsible for the softer and harder energy bands, respectively. FORCE will play an essential role in the multi-messenger astronomy in the 2030s with its broadband X-ray sensitivity. △ Less

Submitted 13 March, 2023; originally announced March 2023.

Comments: 12 pages, 8 figures. Proceedings of SPIE Astronomical Telescopes and Instrumentation 2022

Journal ref: Proc. of SPIE vol. 12181, 1218122 (2022)

Wide-gap CdTe Strip Detectors for High-Resolution Imaging in Hard X-rays

Authors: Shunsaku Nagasawa, Takahiro Minami, Shin Watanabe, Tadayuki Takahashi

Abstract: We propose a new strip configuration for CdTe X-ray detectors, named "Wide-gap CdTe strip detector", in which the gap between adjacent strips is much wider than the width of each strip. It has been known that the observed energies of an incoming photon in adjacent strips can be utilized to achieve a position resolution finer than the strip pitch, if and only if the charge cloud induced by an incom… ▽ More We propose a new strip configuration for CdTe X-ray detectors, named "Wide-gap CdTe strip detector", in which the gap between adjacent strips is much wider than the width of each strip. It has been known that the observed energies of an incoming photon in adjacent strips can be utilized to achieve a position resolution finer than the strip pitch, if and only if the charge cloud induced by an incoming X-ray photon is split into multiple strips and their energies are accurately measured. However, with existing CdTe strip detectors, the ratio of such charge-sharing events is limited. An idea for a potential breakthrough to greatly enhance the ratio of charge-sharing events is to widen the gaps between strips on the detector. To test the concept, we developed a wide-gap CdTe strip detector, which has 64 platinum strip electrodes on the cathode side with some variations in strip pitches from 60 um (30 um strip and 30 um gap width) to 80 um (30 um strip and 50 um gap width). We evaluated the performance depending on the strip pitches by irradiating X-rays from Am-241 on the detector. The charge loss due to the wider gaps on the detector was found to be significant to the extent that the assumption that the energy of an incoming photon for a charge-sharing event was the simple sum of the energies detected in adjacent strips lead to a significant degradation in the energy resolution in the accumulated spectrum, compared with those obtained with its predecessor having standard gap-widths. We then developed a new energy-reconstruction method to compensate for the charge loss. Application of the method to the data yielded a spectrum with a comparable spectral resolution with that of the predecessor. The ratio of the charge-sharing events for 17.8 keV events was doubled from that of the predecessor, from 24.3 to 49.9 percent. △ Less

Submitted 2 March, 2023; v1 submitted 28 February, 2023; originally announced February 2023.

Comments: 10 pages, 8 figures, 2 tables. Accepted for publication in NIMA

The Venus' Cloud Discontinuity in 2022

Authors: J. Peralta, A. Cidadão, L. Morrone, C. Foster, M. Bullock, E. F. Young, I. Garate-Lopez, A. Sánchez-Lavega, T. Horinouchi, T. Imamura, E. Kardasis, A. Yamazaki, S. Watanabe

Abstract: First identified in 2016 by JAXA's Akatsuki mission, the discontinuity/disruption is a recurrent wave observed to propagate during decades at the deeper clouds of Venus (47--56 km above the surface), while its absence at the clouds' top ($\sim$70 km) suggests that it dissipates at the upper clouds and contributes in the maintenance of the puzzling atmospheric superrotation of Venus through wave-me… ▽ More First identified in 2016 by JAXA's Akatsuki mission, the discontinuity/disruption is a recurrent wave observed to propagate during decades at the deeper clouds of Venus (47--56 km above the surface), while its absence at the clouds' top ($\sim$70 km) suggests that it dissipates at the upper clouds and contributes in the maintenance of the puzzling atmospheric superrotation of Venus through wave-mean flow interaction. Taking advantage of the campaign of ground-based observations undertaken in coordination with the Akatsuki mission since December 2021 until July 2022, we aimed to undertake the longest uninterrupted monitoring of the cloud discontinuity up to date to obtain a pioneering long-term characterization of its main properties and better constrain its recurrence and lifetime. The dayside upper, middle and nightside lower clouds were studied with images with suitable filters acquired by Akatsuki/UVI, amateur observers and NASA's IRTF/SpeX, respectively. Hundreds of images were inspected in search of manifestations of the discontinuity events and to measure key properties like its dimensions, orientation or rotation period. We succeeded in tracking the discontinuity at the middle clouds during 109 days without interruption. The discontinuity exhibited properties nearly identical to measurements in 2016 and 2020, with an orientation of $91^{\circ}\pm 8^{\circ}$, length/width of $4100\pm 800$ / $500\pm 100$ km and a rotation period of $5.11\pm 0.09$ days. Ultraviolet images during 13-14 June 2022 suggest that the discontinuity may have manifested at the top of the clouds during $\sim$21 hours as a result of an altitude change in the critical level for this wave due to slower zonal winds. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Comments: 8 pages, 4 figures, 2 animated figures, 1 table

Journal ref: A&A 672, L2 (2023)

Searching for neutrinos from solar flares across solar cycles 23 and 24 with the Super-Kamiokande detector

Authors: K. Okamoto, K. Abe, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, Y. Kaneshima, Y. Kataoka, Y. Kashiwagi, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nagao, M. Nakahata, Y. Nakano, S. Nakayama, Y. Noguchi, K. Sato, H. Sekiya, K. Shimizu, M. Shiozawa , et al. (220 additional authors not shown)

Abstract: Neutrinos associated with solar flares (solar-flare neutrinos) provide information on particle acceleration mechanisms during the impulsive phase of solar flares. We searched using the Super-Kamiokande detector for neutrinos from solar flares that occurred during solar cycles $23$ and $24$, including the largest solar flare (X28.0) on November 4th, 2003. In order to minimize the background rate we… ▽ More Neutrinos associated with solar flares (solar-flare neutrinos) provide information on particle acceleration mechanisms during the impulsive phase of solar flares. We searched using the Super-Kamiokande detector for neutrinos from solar flares that occurred during solar cycles $23$ and $24$, including the largest solar flare (X28.0) on November 4th, 2003. In order to minimize the background rate we searched for neutrino interactions within narrow time windows coincident with $γ$-rays and soft X-rays recorded by satellites. In addition, we performed the first attempt to search for solar-flare neutrinos from solar flares on the invisible side of the Sun by using the emission time of coronal mass ejections (CMEs). By selecting twenty powerful solar flares above X5.0 on the visible side and eight CMEs whose emission speed exceeds $2000$ $\mathrm{km \, s^{-1}}$ on the invisible side from 1996 to 2018, we found two (six) neutrino events coincident with solar flares occurring on the visible (invisible) side of the Sun, with a typical background rate of $0.10$ ($0.62$) events per flare in the MeV-GeV energy range. No significant solar-flare neutrino signal above the estimated background rate was observed. As a result we set the following upper limit on neutrino fluence at the Earth $\mathitΦ<1.1\times10^{6}$ $\mathrm{cm^{-2}}$ at the $90\%$ confidence level for the largest solar flare. The resulting fluence limits allow us to constrain some of the theoretical models for solar-flare neutrino emission. △ Less

Submitted 26 October, 2022; v1 submitted 24 October, 2022; originally announced October 2022.

Comments: 36 pages, 18 figures, 9 tables (Figure 12 was replaced because it was incorrect in version 1.)

Neutron Tagging following Atmospheric Neutrino Events in a Water Cherenkov Detector

Authors: K. Abe, Y. Haga, Y. Hayato, K. Hiraide, K. Ieki, M. Ikeda, S. Imaizumi, K. Iyogi, J. Kameda, Y. Kanemura, Y. Kataoka, Y. Kato, Y. Kishimoto, S. Miki, S. Mine, M. Miura, T. Mochizuki, S. Moriyama, Y. Nagao, M. Nakahata, T. Nakajima, Y. Nakano, S. Nakayama, T. Okada, K. Okamoto , et al. (281 additional authors not shown)

Abstract: We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agr… ▽ More We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agrees with this value within 10%. The tagging procedure was performed on 3,244.4 days of SK-IV atmospheric neutrino data, identifying 18,091 neutrons in 26,473 neutrino events. The fitted neutron capture lifetime was measured as 218 \pm 9 μs. △ Less

Submitted 20 September, 2022; v1 submitted 18 September, 2022; originally announced September 2022.

Journal ref: JINST 17 P10029 (2022)

Presolar stardust in asteroid Ryugu

Authors: Jens Barosch, Larry R. Nittler, Jianhua Wang, Conel M. O'D. Alexander, Bradley T. De Gregorio, Cécile Engrand, Yoko Kebukawa, Kazuhide Nagashima, Rhonda M. Stroud, Hikaru Yabuta, Yoshinari Abe, Jérôme Aléon, Sachiko Amari, Yuri Amelin, Ken-ichi Bajo, Laure Bejach, Martin Bizzarro, Lydie Bonal, Audrey Bouvier, Richard W. Carlson, Marc Chaussidon, Byeon-Gak Choi, George D. Cody, Emmanuel Dartois, Nicolas Dauphas , et al. (99 additional authors not shown)

Abstract: We have conducted a NanoSIMS-based search for presolar material in samples recently returned from C-type asteroid Ryugu as part of JAXA's Hayabusa2 mission. We report the detection of all major presolar grain types with O- and C-anomalous isotopic compositions typically identified in carbonaceous chondrite meteorites: 1 silicate, 1 oxide, 1 O-anomalous supernova grain of ambiguous phase, 38 SiC, a… ▽ More We have conducted a NanoSIMS-based search for presolar material in samples recently returned from C-type asteroid Ryugu as part of JAXA's Hayabusa2 mission. We report the detection of all major presolar grain types with O- and C-anomalous isotopic compositions typically identified in carbonaceous chondrite meteorites: 1 silicate, 1 oxide, 1 O-anomalous supernova grain of ambiguous phase, 38 SiC, and 16 carbonaceous grains. At least two of the carbonaceous grains are presolar graphites, whereas several grains with moderate C isotopic anomalies are probably organics. The presolar silicate was located in a clast with a less altered lithology than the typical extensively aqueously altered Ryugu matrix. The matrix-normalized presolar grain abundances in Ryugu are 4.8$^{+4.7}_{-2.6}$ ppm for O-anomalous grains, 25$^{+6}_{-5}$ ppm for SiC grains and 11$^{+5}_{-3}$ ppm for carbonaceous grains. Ryugu is isotopically and petrologically similar to carbonaceous Ivuna-type (CI) chondrites. To compare the in situ presolar grain abundances of Ryugu with CI chondrites, we also mapped Ivuna and Orgueil samples and found a total of SiC grains and 6 carbonaceous grains. No O-anomalous grains were detected. The matrix-normalized presolar grain abundances in the CI chondrites are similar to those in Ryugu: 23 $^{+7}_{-6}$ ppm SiC and 9.0$^{+5.3}_{-4.6}$ ppm carbonaceous grains. Thus, our results provide further evidence in support of the Ryugu-CI connection. They also reveal intriguing hints of small-scale heterogeneities in the Ryugu samples, such as locally distinct degrees of alteration that allowed the preservation of delicate presolar material. △ Less

Submitted 16 August, 2022; originally announced August 2022.

Comments: 12 pages, 3 figures, 2 tables. Published in ApJL

Journal ref: 2022, The Astrophysical Journal Letters, 935, L3 (12pp)

Reflectivity of Venus' dayside disk during the 2020 observation campaign: outcomes and future perspectives

Authors: Yeon Joo Lee, Antonio García Muñoz, Atsushi Yamazaki, Eric Quémerais, Stefano Mottola, Stephan Hellmich, Thomas Granzer, Gilles Bergond, Martin Roth, Eulalia Gallego-Cano, Jean-Yves Chaufray, Rozenn Robidel, Go Murakami, Kei Masunaga, Murat Kaplan, Orhan Erece, Ricardo Hueso, Petr Kabáth, Magdaléna Špoková, Agustín Sánchez-Lavega, Myung-Jin Kim, Valeria Mangano, Kandis-Lea Jessup, Thomas Widemann, Ko-ichiro Sugiyama , et al. (6 additional authors not shown)

Abstract: We performed a unique Venus observation campaign to measure the disk brightness of Venus over a broad range of wavelengths in August and September 2020. The primary goal of the campaign is to investigate the absorption properties of the unknown absorber in the clouds. The secondary goal is to extract a disk mean SO$_2$ gas abundance, whose absorption spectral feature is entangled with that of the… ▽ More We performed a unique Venus observation campaign to measure the disk brightness of Venus over a broad range of wavelengths in August and September 2020. The primary goal of the campaign is to investigate the absorption properties of the unknown absorber in the clouds. The secondary goal is to extract a disk mean SO$_2$ gas abundance, whose absorption spectral feature is entangled with that of the unknown absorber at the ultraviolet (UV) wavelengths. A total of 3 spacecraft and 6 ground-based telescopes participated in this campaign, covering the 52 to 1700~nm wavelength range. After careful evaluation of the observational data, we focused on the data sets acquired by 4 facilities. We accomplished our primary goal by analyzing the reflectivity spectrum of the Venus disk over the 283-800 nm wavelengths. Considerable absorption is present in the 350-450 nm range, for which we retrieved the corresponding optical depth by the unknown absorber. The result shows a consistent wavelength dependence of the relative optical depth with that at low latitudes during the Venus flyby by MESSENGER in 2007 (Pérez-Hoyos et al. 2018), which was expected because the overall disk reflectivity is dominated by low latitudes. Last, we summarize the experience obtained during this first campaign that should enable us to accomplish our second goal in future campaigns. △ Less

Submitted 27 July, 2022; originally announced July 2022.

Comments: Accepted for publication in PSJ, 45 pages, 13 figures

Search for supernova bursts in Super-Kamiokande IV

Authors: The Super-Kamiokande collaboration, :, M. Mori, K. Abe, Y. Hayato, K. Hiraide, K. Ieki, M. Ikeda, S. Imaizumi, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nagao, M. Nakahata, Y. Nakano, S. Nakayama, Y. Noguchi, T. Okada, K. Okamoto , et al. (223 additional authors not shown)

Abstract: Super-Kamiokande has been searching for neutrino bursts characteristic of core-collapse supernovae continuously, in real time, since the start of operations in 1996. The present work focuses on detecting more distant supernovae whose event rate may be too small to trigger in real time, but may be identified using an offline approach. The analysis of data collected from 2008 to 2018 found no eviden… ▽ More Super-Kamiokande has been searching for neutrino bursts characteristic of core-collapse supernovae continuously, in real time, since the start of operations in 1996. The present work focuses on detecting more distant supernovae whose event rate may be too small to trigger in real time, but may be identified using an offline approach. The analysis of data collected from 2008 to 2018 found no evidence of distant supernovae bursts. This establishes an upper limit of 0.29 year$^{-1}$ on the rate of core-collapse supernovae out to 100 kpc at 90% C.L.. For supernovae that fail to explode and collapse directly to black holes the limit reaches to 300 kpc. △ Less

Submitted 2 June, 2022; originally announced June 2022.

Pre-Supernova Alert System for Super-Kamiokande

Authors: Super-Kamiokande Collaboration, :, L. N. Machado, K. Abe, Y. Hayato, K. Hiraide, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nakano, M. Nakahata, S. Nakayama, Y. Noguchi, K. Okamoto, K. Sato, H. Sekiya, H. Shiba , et al. (202 additional authors not shown)

Abstract: In 2020, the Super-Kamiokande (SK) experiment moved to a new stage (SK-Gd) in which gadolinium (Gd) sulfate octahydrate was added to the water in the detector, enhancing the efficiency to detect thermal neutrons and consequently improving the sensitivity to low energy electron anti-neutrinos from inverse beta decay (IBD) interactions. SK-Gd has the potential to provide early alerts of incipient co… ▽ More In 2020, the Super-Kamiokande (SK) experiment moved to a new stage (SK-Gd) in which gadolinium (Gd) sulfate octahydrate was added to the water in the detector, enhancing the efficiency to detect thermal neutrons and consequently improving the sensitivity to low energy electron anti-neutrinos from inverse beta decay (IBD) interactions. SK-Gd has the potential to provide early alerts of incipient core-collapse supernovae through detection of electron anti-neutrinos from thermal and nuclear processes responsible for the cooling of massive stars before the gravitational collapse of their cores. These pre-supernova neutrinos emitted during the silicon burning phase can exceed the energy threshold for IBD reactions. We present the sensitivity of SK-Gd to pre-supernova stars and the techniques used for the development of a pre-supernova alarm based on the detection of these neutrinos in SK, as well as prospects for future SK-Gd phases with higher concentrations of Gd. For the current SK-Gd phase, high-confidence alerts for Betelgeuse could be issued up to nine hours in advance of the core-collapse itself. △ Less

Submitted 17 August, 2022; v1 submitted 19 May, 2022; originally announced May 2022.

Comments: 20 pages

Journal ref: The Astrophysical Journal, Volume 935, Number 1 (2022)

The spatial distribution of impact craters on Ryugu

Authors: Naoyuki Hirata, Tomokatsu Morota, Yuichiro Cho, Masanori Kanamaru, Sei-ichiro Watanabe, Seiji Sugita, Naru Hirata, Yukio Yamamoto, Rina Noguchi, Yuri Shimaki, Eri Tatsumi, Kazuo Yoshioka, Hirotaka Sawada, Yasuhiro Yokota, Naoya Sakatani, Masahiko Hayakawa, Moe Matsuoka, Rie Honda, Shingo Kameda, Mamabu Yamada, Toru Kouyama, Hidehiko Suzuki, Chikatoshi Honda, Kazunori Ogawa, Yuichi Tsuda , et al. (18 additional authors not shown)

Abstract: Asteroid 162173 Ryugu has numerous craters. The initial measurement of impact craters on Ryugu, by Sugita et al. (2019), is based on Hayabusa2 ONC images obtained during the first month after the arrival of Hayabusa2 in June 2018. Utilizing new images taken until February 2019, we constructed a global impact crater catalogue of Ryugu, which includes all craters larger than 20 m in diameter on the… ▽ More Asteroid 162173 Ryugu has numerous craters. The initial measurement of impact craters on Ryugu, by Sugita et al. (2019), is based on Hayabusa2 ONC images obtained during the first month after the arrival of Hayabusa2 in June 2018. Utilizing new images taken until February 2019, we constructed a global impact crater catalogue of Ryugu, which includes all craters larger than 20 m in diameter on the surface of Ryugu. As a result, we identified 77 craters on the surface of Ryugu. Ryugu shows variation in crater density which cannot be explained by the randomness of cratering; there are more craters at lower latitudes and fewer at higher latitudes, and fewer craters in the western bulge (160 E - 290 E) than in the region around the meridian (300 E - 30 E). This variation implies a complicated geologic history for Ryugu. It seems that the longitudinal variation in crater density simply indicates variation in the crater ages; the cratered terrain around the meridian seems to be geologically old while the western bulge is relatively young. The latitudinal variation in crater density suggests that the equatorial ridge of Ryugu is a geologically old structure; however, this could be alternatively explained by a collision with many fission fragments during a short rotational period of Ryugu in the past. △ Less

Submitted 11 May, 2022; originally announced May 2022.

Comments: 18 pages 3 figures

Journal ref: Icarus Volume 338, 1 March 2020, 113527

Rotational effect as the possible cause of the east-west asymmetric crater rims on Ryugu observed by LIDAR data

Authors: Naoyuki Hirata, Noriyuki Namiki, Fumi Yoshida, Koji Matsumoto, Hirotomo Noda, Hiroki Senshu, Takahide Mizuno, Fuyuto Terui, Yoshiaki Ishihara, Ryuhei Yamada, Keiko Yamamoto, Shinsuke Abe, Rina Noguchi, Naru Hirata, Yuichi Tsuda, Sei-ichiro Watanabe

Abstract: Asteroid 162173 Ryugu is a rubble-pile asteroid, whose top-shape is compatible with models of deformation by spin up. Rims of major craters on Ryugu have an east-west asymmetric profile; their western crater rims are sharp and tall, while their eastern crater rims are rounded and low. Although there are various possible explanations, we theoretically assess the effect of asteroid rotation as the p… ▽ More Asteroid 162173 Ryugu is a rubble-pile asteroid, whose top-shape is compatible with models of deformation by spin up. Rims of major craters on Ryugu have an east-west asymmetric profile; their western crater rims are sharp and tall, while their eastern crater rims are rounded and low. Although there are various possible explanations, we theoretically assess the effect of asteroid rotation as the possible reason for this east-west asymmetry. It is known that the trajectories and fates of ejecta are affected by the rotation. The Coriolis force and the inertial speed of the rotating surface are the factors altering the ejecta trajectories. Consequently, we found that the east-west asymmetric crater rims might be formed as a result of rotation, when the inertial speed of the rotating surface is nearly equal to the first cosmic velocity of the body. In other words, it is possible that the observed east-west asymmetric rims of the Urashima, Cendrillon, and Kolobok craters were formed when Ryugu's rotation period was ~3.6 h. △ Less

Submitted 10 May, 2022; originally announced May 2022.

Comments: 30 pages 13 figures

Journal ref: Icarus Volume 354, 15 January 2021, 114073

On the faintest solar coronal hard X-rays observed with FOXSI

Authors: Juan Camilo Buitrago-Casas, Lindsay Glesener, Steven Christe, Säm Krucker, Juliana Vievering, P. S. Athiray, Sophie Musset, Lance Davis, Sasha Courtade, Gregory Dalton, Paul Turin, Zoe Turin, Brian Ramsey, Stephen Bongiorno, Daniel Ryan, Tadayuki Takahashi, Kento Furukawa, Shin Watanabe, Noriyuki Narukage, Shin-nosuke Ishikawa, Ikuyuki Mitsuishi, Kouichi Hagino, Van Shourt, Jessie Duncan, Yixian Zhang , et al. (1 additional authors not shown)

Abstract: Solar nanoflares are small eruptive events releasing magnetic energy in the quiet corona. If nanoflares follow the same physics as their larger counterparts, they should emit hard X-rays (HXRs) but with a rather faint intensity. A copious and continuous presence of nanoflares would deliver enormous amounts of energy into the solar corona, possibly accounting for its high temperatures. To date, the… ▽ More Solar nanoflares are small eruptive events releasing magnetic energy in the quiet corona. If nanoflares follow the same physics as their larger counterparts, they should emit hard X-rays (HXRs) but with a rather faint intensity. A copious and continuous presence of nanoflares would deliver enormous amounts of energy into the solar corona, possibly accounting for its high temperatures. To date, there has not been any direct observation of such sustained and persistent HXRs from the quiescent Sun. However, Hannah et al. in 2010 constrained the quiet Sun HXR emission using almost 12 days of quiescent solar-off-pointing observations by RHESSI. These observations set upper limits at $3.4\times 10^{-2}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ and $9.5\times 10^{-4}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ for the 3-6 keV and 6-12 keV energy ranges, respectively. Observing feeble HXRs is challenging because it demands high sensitivity and dynamic range instruments in HXRs. The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment excels in these two attributes. Particularly, FOXSI completed its third successful flight (FOXSI-3) on September 7th, 2018. During FOXSI-3's flight, the Sun exhibited a fairly quiet configuration, displaying only one aged non-flaring active region. Using the entire $\sim$6.5 minutes of FOXSI-3 data, we constrained the quiet Sun emission in HXRs. We found $2σ$ upper limits in the order of $\sim 10^{-3}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ for the 5-10 keV energy range. FOXSI-3's upper limit is consistent with what was reported by Hannah et al., 2010, but FOXSI-3 achieved this result using $\sim$1/2640 less time than RHESSI. A possible future spacecraft using FOXSI's concept would allow enough observation time to constrain the current HXR quiet Sun limits further or perhaps even make direct detections. △ Less

Submitted 9 May, 2022; originally announced May 2022.

Journal ref: A&A 665, A103 (2022)

Testing Non-Standard Interactions Between Solar Neutrinos and Quarks with Super-Kamiokande

Authors: Super-Kamiokande Collaboration, :, P. Weatherly, K. Abe, C. Bronner, Y. Hayato, K. Hiraide, M. Ikeda, K. Iyogi, J. Kameda, Y. Kanemura, Y. Kataoka, Y. Kato, Y. Kishimoto, S. Miki, M. Miura, S. Moriyama, T. Mochizuki, M. Nakahata, Y. Nakano, S. Nakayama, T. Okada, K. Okamoto, A. Orii, G. Pronost , et al. (248 additional authors not shown)

Abstract: Non-Standard Interactions (NSI) between neutrinos and matter affect the neutrino flavor oscillations. Due to the high matter density in the core of the Sun, solar neutrinos are suited to probe these interactions. Using the $277$ kton-yr exposure of Super-Kamiokande to $^{8}$B solar neutrinos, we search for the presence of NSI. Our data favors the presence of NSI with down quarks at 1.8$σ$, and wit… ▽ More Non-Standard Interactions (NSI) between neutrinos and matter affect the neutrino flavor oscillations. Due to the high matter density in the core of the Sun, solar neutrinos are suited to probe these interactions. Using the $277$ kton-yr exposure of Super-Kamiokande to $^{8}$B solar neutrinos, we search for the presence of NSI. Our data favors the presence of NSI with down quarks at 1.8$σ$, and with up quarks at 1.6$σ$, with the best fit NSI parameters being ($ε_{11}^{d},ε_{12}^{d}$) = (-3.3, -3.1) for $d$-quarks and ($ε_{11}^{u},ε_{12}^{u}$) = (-2.5, -3.1) for $u$-quarks. After combining with data from the Sudbury Neutrino Observatory and Borexino, the significance increases by 0.1$σ$. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Comments: Author: Pierce Weatherly 25 pages. To be submitted to Physical Review D

Deformation of a rotated granular pile governed by body-force-dependent friction

Authors: T. Irie, R. Yamaguchi, S. Watanabe, H. Katsuragi

Abstract: Although the gravity dependence of granular friction is crucial to understand various natural phenomena, its precise characterization is difficult. We propose a method to characterize granular friction under various gravity (body force) conditions controlled by centrifugal force; specifically, the deformation of a rotated granular pile was measured. To understand the mechanics governing the observ… ▽ More Although the gravity dependence of granular friction is crucial to understand various natural phenomena, its precise characterization is difficult. We propose a method to characterize granular friction under various gravity (body force) conditions controlled by centrifugal force; specifically, the deformation of a rotated granular pile was measured. To understand the mechanics governing the observed nontrivial deformation of this pile, we introduced an analytic model considering local force balance. The excellent agreement between the experimental data and theoretical model suggests that the deformation is simply governed by the net body force (sum of gravity and centrifugal force) and friction angle. The body-force dependence of granular friction was precisely measured from the experimental results. The results reveal that the grain shape affects the degree of body-force dependence of the granular friction. △ Less

Submitted 5 December, 2021; originally announced December 2021.

Comments: 10 pages, 5 figures

Diffuse Supernova Neutrino Background Search at Super-Kamiokande

Authors: Super-Kamiokande Collaboration, :, K. Abe, C. Bronner, Y. Hayato, K. Hiraide, M. Ikeda, S. Imaizumi, J. Kameda, Y. Kanemura, Y. Kataoka, S. Miki, M. Miura, S. Moriyama, Y. Nagao, M. Nakahata, S. Nakayama, T. Okada, K. Okamoto, A. Orii, G. Pronost, H. Sekiya, M. Shiozawa, Y. Sonoda, Y. Suzuki , et al. (197 additional authors not shown)

Abstract: A new search for the diffuse supernova neutrino background (DSNB) flux has been conducted at Super-Kamiokande (SK), with a $22.5\times2970$-kton$\cdot$day exposure from its fourth operational phase IV. The new analysis improves on the existing background reduction techniques and systematic uncertainties and takes advantage of an improved neutron tagging algorithm to lower the energy threshold comp… ▽ More A new search for the diffuse supernova neutrino background (DSNB) flux has been conducted at Super-Kamiokande (SK), with a $22.5\times2970$-kton$\cdot$day exposure from its fourth operational phase IV. The new analysis improves on the existing background reduction techniques and systematic uncertainties and takes advantage of an improved neutron tagging algorithm to lower the energy threshold compared to the previous phases of SK. This allows for setting the world's most stringent upper limit on the extraterrestrial $\barν_e$ flux, for neutrino energies below 31.3 MeV. The SK-IV results are combined with the ones from the first three phases of SK to perform a joint analysis using $22.5\times5823$ kton$\cdot$days of data. This analysis has the world's best sensitivity to the DSNB $\barν_e$ flux, comparable to the predictions from various models. For neutrino energies larger than 17.3 MeV, the new combined $90\%$ C.L. upper limits on the DSNB $\barν_e$ flux lie around $2.7$ cm$^{-2}$$\cdot$$\text{sec}^{-1}$, strongly disfavoring the most optimistic predictions. Finally, potentialities of the gadolinium phase of SK and the future Hyper-Kamiokande experiment are discussed. △ Less

Submitted 2 November, 2021; v1 submitted 23 September, 2021; originally announced September 2021.

Comments: 42 pages, 37 figures, 14 tables

First Gadolinium Loading to Super-Kamiokande

Authors: K. Abe, C. Bronner, Y. Hayato, K. Hiraide, M. Ikeda, S. Imaizumi, J. Kameda, Y. Kanemura, Y. Kataoka, S. Miki, M. Miura, S. Moriyama, Y. Nagao, M. Nakahata, S. Nakayama, T. Okada, K. Okamoto, A. Orii, G. Pronost, H. Sekiya, M. Shiozawa, Y. Sonoda, Y. Suzuki, A. Takeda, Y. Takemoto , et al. (192 additional authors not shown)

Abstract: In order to improve Super-Kamiokande's neutron detection efficiency and to thereby increase its sensitivity to the diffuse supernova neutrino background flux, 13 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ (gadolinium sulfate octahydrate) was dissolved into the detector's otherwise ultrapure water from July 14 to August 17, 2020, marking the start of the SK-Gd phase of operations. During the loa… ▽ More In order to improve Super-Kamiokande's neutron detection efficiency and to thereby increase its sensitivity to the diffuse supernova neutrino background flux, 13 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ (gadolinium sulfate octahydrate) was dissolved into the detector's otherwise ultrapure water from July 14 to August 17, 2020, marking the start of the SK-Gd phase of operations. During the loading, water was continuously recirculated at a rate of 60 m$^3$/h, extracting water from the top of the detector and mixing it with concentrated $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ solution to create a 0.02% solution of the Gd compound before injecting it into the bottom of the detector. A clear boundary between the Gd-loaded and pure water was maintained through the loading, enabling monitoring of the loading itself and the spatial uniformity of the Gd concentration over the 35 days it took to reach the top of the detector. During the subsequent commissioning the recirculation rate was increased to 120 m$^3$/h, resulting in a constant and uniform distribution of Gd throughout the detector and water transparency equivalent to that of previous pure-water operation periods. Using an Am-Be neutron calibration source the mean neutron capture time was measured to be $115\pm1$ $μ$s, which corresponds to a Gd concentration of $111\pm2$ ppm, as expected for this level of Gd loading. This paper describes changes made to the water circulation system for this detector upgrade, the Gd loading procedure, detector commissioning, and the first neutron calibration measurements in SK-Gd. △ Less

Submitted 15 December, 2021; v1 submitted 1 September, 2021; originally announced September 2021.

Comments: 37 pages, 19 Figures, Accepted for publication in Nucl. Instrum. Meth. A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1027 (2022) 166248

Tomographic Imaging by a Si/CdTe Compton Camera for In-111 and I-131 Radionuclides

Authors: Goro Yabu, Hiroki Yoneda, Tadashi Orita, Shin'ichiro Takeda, Pietro Caradonna, Tadayuki Takahashi, Shin Watanabe, Fumiki Moriyama

Abstract: Tomographic imaging with radionuclides commonly used in nuclear medicine, such as $^{111}$In (171 and 245 keV) and $^{131}$I (364 keV), is in high demand for medical applications and small animal imaging. The Si/CdTe Compton camera with its high angular and high energy resolutions is an especially promising detector to extend the energy coverage for imaging to the range that covers gamma-ray emitt… ▽ More Tomographic imaging with radionuclides commonly used in nuclear medicine, such as $^{111}$In (171 and 245 keV) and $^{131}$I (364 keV), is in high demand for medical applications and small animal imaging. The Si/CdTe Compton camera with its high angular and high energy resolutions is an especially promising detector to extend the energy coverage for imaging to the range that covers gamma-ray emitted from these radionuclides. Here, we take the first steps towards short-distance imaging by conducting experiments using three-dimensional phantoms composed of multiple sphere-like solutions of $^{111}$In and $^{131}$I with a diameter of 2.7 mm, placed at a distance of 41 mm. Using simple back-projection methods, the positions of the sources are reproduced with a spatial resolution of 11.5 mm and 9.0 mm (FWHM) for $^{111}$In and $^{131}$I, respectively. We found that a LM-MLEM method gives a better resolution of 4.0 mm and 2.7 mm (FWHM). We resolve source positions of a tetrahedron structure with a source-to-source separation of 28 mm. These findings demonstrate that Compton Cameras have the potential of close-distance imaging of radioisotopes distributions in the energy range below 400 keV. △ Less

Submitted 19 August, 2021; originally announced August 2021.

Detailed Design of the Science Operations for the XRISM mission

Authors: Yukikatsu Terada, Matt Holland, Michael Loewenstein, Makoto Tashiro, Hiromitsu Takahashi, Masayoshi Nobukawa, Tsunefumi Mizuno, Takayuki Tamura, Shin'ichiro Uno, Shin Watanabe, Chris Baluta, Laura Burns, Ken Ebisawa, Satoshi Eguchi, Yasushi Fukazawa, Katsuhiro Hayashi, Ryo Iizuka, Satoru Katsuda, Takao Kitaguchi, Aya Kubota, Eric Miller, Koji Mukai, Shinya Nakashima, Kazuhiro Nakazawa, Hirokazu Odaka , et al. (14 additional authors not shown)

Abstract: XRISM is an X-ray astronomical mission by the JAXA, NASA, ESA and other international participants, that is planned for launch in 2022 (Japanese fiscal year), to quickly restore high-resolution X-ray spectroscopy of astrophysical objects. To enhance the scientific outputs of the mission, the Science Operations Team (SOT) is structured independently from the instrument teams and the Mission Operati… ▽ More XRISM is an X-ray astronomical mission by the JAXA, NASA, ESA and other international participants, that is planned for launch in 2022 (Japanese fiscal year), to quickly restore high-resolution X-ray spectroscopy of astrophysical objects. To enhance the scientific outputs of the mission, the Science Operations Team (SOT) is structured independently from the instrument teams and the Mission Operations Team. The responsibilities of the SOT are divided into four categories: 1) guest observer program and data distributions, 2) distribution of analysis software and the calibration database, 3) guest observer support activities, and 4) performance verification and optimization activities. As the first step, lessons on the science operations learned from past Japanese X-ray missions are reviewed, and 15 kinds of lessons are identified. Among them, a) the importance of early preparation of the operations from the ground stage, b) construction of an independent team for science operations separate from the instrument development, and c) operations with well-defined duties by appointed members are recognized as key lessons. Then, the team structure and the task division between the mission and science operations are defined; the tasks are shared among Japan, US, and Europe and are performed by three centers, the SOC, SDC, and ESAC, respectively. The SOC is designed to perform tasks close to the spacecraft operations, such as spacecraft planning, quick-look health checks, pre-pipeline processing, etc., and the SDC covers tasks regarding data calibration processing, maintenance of analysis tools, etc. The data-archive and user-support activities are covered both by the SOC and SDC. Finally, the science-operations tasks and tools are defined and prepared before launch. △ Less

Submitted 15 June, 2021; v1 submitted 3 June, 2021; originally announced June 2021.

Comments: 42 pages, 7 figures, 8 table, Accepted for Publication in JATIS (SPIE)

Journal ref: SPIE JATIS, 7(3), 037001 (2021)

An application of a Si/CdTe Compton camera for the polarization measurement of hard x-rays from highly charged heavy ions

Authors: Yutaka Tsuzuki, Shin Watanabe, Shimpei Oishi, Nobuyuki Nakamura, Naoki Numadate, Hirokazu Odaka, Yuusuke Uchida, Hiroki Yoneda, Tadayuki Takahashi

Abstract: The methods to measure the polarization of the x-rays from highly charged heavy ions with a significantly higher accuracy than the existing technology is needed to explore relativistic and quantum electrodynamics (QED) effects including the Breit interaction. We developed the Electron Beam Ion Trap Compton Camera (EBIT-CC), a new Compton polarimeter with pixelated multi-layer silicon and cadmium t… ▽ More The methods to measure the polarization of the x-rays from highly charged heavy ions with a significantly higher accuracy than the existing technology is needed to explore relativistic and quantum electrodynamics (QED) effects including the Breit interaction. We developed the Electron Beam Ion Trap Compton Camera (EBIT-CC), a new Compton polarimeter with pixelated multi-layer silicon and cadmium telluride counters. The EBIT-CC detects the three-dimensional position of Compton scattering and photoelectric absorption, and thus the degree of polarization of incoming x-rays can be evaluated. We attached the EBIT-CC on the Tokyo Electron Beam Ion Trap (Tokyo-EBIT) in the University of Electro-Communications. An experiment was performed to evaluate its polarimetric capability through an observation of radiative recombination x-rays emitted from highly charged krypton ions, which were generated by the Tokyo-EBIT. The Compton camera of the EBIT-CC was calibrated for the 75 keV x-rays. We developed event reconstruction and selection procedures and applied them to every registered event. As a result, we successfully obtained the polarization degree with an absolute uncertainty of 0.02. This uncertainty is small enough to probe the difference between the zero-frequency approximation and full-frequency-dependent calculation for the Breit interaction, which is expected for dielectronic recombination x-rays of highly charged heavy ions. △ Less

Submitted 29 May, 2021; originally announced May 2021.

Comments: 11 pages, 15 figures

SPH Simulations for Shape Deformation of Rubble-Pile Asteroids Through Spinup: The Challenge for Making Top-Shaped Asteroids Ryugu and Bennu

Authors: Keisuke Sugiura, Hiroshi Kobayashi, Sei-ichiro Watanabe, Hidenori Genda, Ryuki Hyodo, Shu-ichiro Inutsuka

Abstract: Asteroid Ryugu and asteroid Bennu, which were recently visited by spacecraft Hayabusa2 and OSIRIS-REx, respectively, are spinning top-shaped rubble piles. Other axisymmetric top-shaped near-Earth asteroids have been observed with ground-based radar, most of which rotate near breakup rotation periods of ~ 3 hours. This suggests that rotation-induced deformation of asteroids through rotational spinu… ▽ More Asteroid Ryugu and asteroid Bennu, which were recently visited by spacecraft Hayabusa2 and OSIRIS-REx, respectively, are spinning top-shaped rubble piles. Other axisymmetric top-shaped near-Earth asteroids have been observed with ground-based radar, most of which rotate near breakup rotation periods of ~ 3 hours. This suggests that rotation-induced deformation of asteroids through rotational spinup produces top shapes. Although some previous simulations using the Discrete Element Method showed that spinup of rubble piles may produce oblate top shapes, it is still unclear what kinds of conditions such as friction angles of constituent materials and spinup timescales are required for top-shape formation. Here we show, through Smoothed Particle Hydrodynamics simulations of granular bodies spinning-up at different rates, that the rotation-induced deformation of spherical rubble piles before breakup can be classified into three modes according to the friction angle φ_{d}: quasi-static and internal deformation for φ_{d} < 40 degrees, dynamical and internal deformation for 50 degrees < φ_{d} < 60 degrees, and surface landslides for φ_{d} > 70 degrees. Note that these apparent large values of friction angle can be acceptable if we consider the effect of cohesion among blocks of a rubble pile under weak gravity. Bodies with φ_{d} < 60 degrees evolve into oblate spheroids through internal deformation, but never form pronounced equators defining a top shape. In contrast, bodies with φ_{d} > 70 degrees deform into axisymmetric top shapes through an axisymmetric surface landslides if spinup timescales are < a few days. In addition, through slow spinups with timescales > 1 month, bodies with φ_{d} > 70 degrees deform into non-axisymmetric shapes via localized landslides. We suggest that rapid spinup mechanisms are preferable for the formation of axisymmetric top shapes. △ Less

Submitted 27 April, 2021; originally announced April 2021.

Comments: 29 pages, 11 figures, accepted for publication in Icarus

Search for neutrinos in coincidence with gravitational wave events from the LIGO-Virgo O3a Observing Run with the Super-Kamiokande detector

Authors: The Super-Kamiokande collaboration, :, K. Abe, C. Bronner, Y. Hayato, M. Ikeda, S. Imaizumi, J. Kameda, Y. Kanemura, Y. Kataoka, S. Miki, M. Miura, S. Moriyama, Y. Nagao, M. Nakahata, S. Nakayama, T. Okada, K. Okamoto, A. Orii, G. Pronost, H. Sekiya, M. Shiozawa, Y. Sonoda, Y. Suzuki, A. Takeda , et al. (189 additional authors not shown)

Abstract: The Super-Kamiokande detector can be used to search for neutrinos in time coincidence with gravitational waves detected by the LIGO-Virgo Collaboration (LVC). Both low-energy ($7-100$ MeV) and high-energy ($0.1-10^5$ GeV) samples were analyzed in order to cover a very wide neutrino spectrum. Follow-ups of 36 (out of 39) gravitational waves reported in the GWTC-2 catalog were examined; no significa… ▽ More The Super-Kamiokande detector can be used to search for neutrinos in time coincidence with gravitational waves detected by the LIGO-Virgo Collaboration (LVC). Both low-energy ($7-100$ MeV) and high-energy ($0.1-10^5$ GeV) samples were analyzed in order to cover a very wide neutrino spectrum. Follow-ups of 36 (out of 39) gravitational waves reported in the GWTC-2 catalog were examined; no significant excess above the background was observed, with 10 (24) observed neutrinos compared with 4.8 (25.0) expected events in the high-energy (low-energy) samples. A statistical approach was used to compute the significance of potential coincidences. For each observation, p-values were estimated using neutrino direction and LVC sky map ; the most significant event (GW190602_175927) is associated with a post-trial p-value of $7.8\%$ ($1.4σ$). Additionally, flux limits were computed independently for each sample and by combining the samples. The energy emitted as neutrinos by the identified gravitational wave sources was constrained, both for given flavors and for all-flavors assuming equipartition between the different flavors, independently for each trigger and by combining sources of the same nature. △ Less

Submitted 13 September, 2021; v1 submitted 19 April, 2021; originally announced April 2021.

Comments: 16 pages, 5 figures. v2: adding corrections from The Astrophysical Journal review

Journal ref: The Astrophysical Journal, Volume 918, Number 2 (2021)

Hayabusa2 Extended Mission: New Voyage to Rendezvous with a Small Asteroid Rotating with a Short Period

Authors: M. Hirabayashi, Y. Mimasu, N. Sakatani, S. Watanabe, Y. Tsuda, T. Saiki, S. Kikuchi, T. Kouyama, M. Yoshikawa, S. Tanaka, S. Nakazawa, Y. Takei, F. Terui, H. Takeuchi, A. Fujii, T. Iwata, K. Tsumura, S. Matsuura, Y. Shimaki, S. Urakawa, Y. Ishibashi, S. Hasegawa, M. Ishiguro, D. Kuroda, S. Okumura , et al. (19 additional authors not shown)

Abstract: Hayabusa2 is the Japanese Asteroid Return Mission and targeted the carbonaceous asteroid Ryugu, conducted by the Japan Aerospace Exploration Agency (JAXA). The goal of this mission was to conduct proximity operations including remote sensing observations, material sampling, and a Small Carry-On Impact experiment, as well as sample analyses. As of September 2020, the spacecraft is on the way back t… ▽ More Hayabusa2 is the Japanese Asteroid Return Mission and targeted the carbonaceous asteroid Ryugu, conducted by the Japan Aerospace Exploration Agency (JAXA). The goal of this mission was to conduct proximity operations including remote sensing observations, material sampling, and a Small Carry-On Impact experiment, as well as sample analyses. As of September 2020, the spacecraft is on the way back to Earth with samples from Ryugu with no critical issues after the successful departure in November 2019. Here, we propose an extended mission in which the spacecraft will rendezvous with a small asteroid with ~30 m - ~40 m in diameter that is rotating at a spin period of ~10 min after an additional ~10-year cruise phase. We introduce that two scenarios are suitable for the extended mission. In the first scenario, the spacecraft will perform swing-by maneuvers at Venus once and Earth twice to arrive at asteroid 2001 AV43. In the second scenario, it will perform swing-by maneuvers at Earth twice to reach asteroid 1998 KY26. In both scenarios, the mission will continue until the early 2030s. JAXA recently released the decision that the spacecraft will rendezvous with 1998 KY26. This paper focuses on our scientific assessments of the two scenarios but leaves the decision process to go to 1998 KY26 for future reports. Rendezvous operations will be planned to detail the physical properties and surrounding environments of the target, one of the smallest elements of small planetary bodies. By achieving the planned operations, the mission will provide critical hints on the violent histories of collisions and accumulations of small bodies in the solar system. Furthermore, the established scientific knowledge and techniques will advance key technologies for planetary defense. △ Less

Submitted 17 April, 2021; originally announced April 2021.

Comments: 51 pages, 9 figures, and 10 tables. The article is in press in Advances in Space Research

Investigation of UV absorbers on Venus using the 283 and 365 nm phase curves obtained from Akatsuki

Authors: Y. J. Lee, A. García Muñoz, A. Yamazaki, M. Yamada, S. Watanabe, T. Encrenaz

Abstract: The so-called unknown absorber in the clouds of Venus is an important absorber of solar energy, but its vertical distribution remains poorly quantified. We analyze the 283 and 365-nm phase curves of the disk-integrated albedo measured by Akatsuki. Based on our models, we find that the unknown absorber can exist either well-mixed over the entire upper cloud or within a thin layer. The necessary con… ▽ More The so-called unknown absorber in the clouds of Venus is an important absorber of solar energy, but its vertical distribution remains poorly quantified. We analyze the 283 and 365-nm phase curves of the disk-integrated albedo measured by Akatsuki. Based on our models, we find that the unknown absorber can exist either well-mixed over the entire upper cloud or within a thin layer. The necessary condition to explain the 365-nm phase curve is that the unknown absorber must absorb efficiently within the cloud scale height immediately below the cloud top. Using this constraint, we attempt to extract the SO$_2$ abundance from the 283-nm phase curve. However we cannot disentangle the absorption by SO$_2$ and by the unknown absorber. Considering previous SO$_2$ abundance measurements at mid-infrared wavelengths, the required absorption coefficient of the unknown absorber at 283~nm must be more than twice that at 365~nm. △ Less

Submitted 9 April, 2021; v1 submitted 16 March, 2021; originally announced March 2021.

Comments: Supplementary Information is available https://agupubs.onlinelibrary.wiley.com/action/downloadSupplement?doi=10.1029%2F2020GL090577&file=2020GL090577-sup-0001-Supporting+Information+SI-S01.pdf

Journal ref: Geophysical Research Letters, 48, e2020GL090577

Origin of the in-orbit instrumental background of the Hard X-ray Imager onboard Hitomi

Authors: Kouichi Hagino, Hirokazu Odaka, Goro Sato, Tamotsu Sato, Hiromasa Suzuki, Tsunefumi Mizuno, Madoka Kawaharada, Masanori Ohno, Kazuhiro Nakazawa, Shogo B. Kobayashi, Hiroaki Murakami, Katsuma Miyake, Makoto Asai, Tatsumi Koi, Greg Madejski, Shinya Saito, Dennis H. Wright, Teruaki Enoto, Yasushi Fukazawa, Katsuhiro Hayashi, Jun Kataoka, Junichiro Katsuta, Motohide Kokubun, Philippe Laurent, Francois Lebrun , et al. (21 additional authors not shown)

Abstract: Understanding and reducing the in-orbit instrumental backgrounds are essential to achieving high sensitivity in hard X-ray astronomical observations. The observational data of the Hard X-ray Imager (HXI) on board the Hitomi satellite provides useful information on the background components, owing to its multi-layer configuration with different atomic numbers: the HXI consists of a stack of four la… ▽ More Understanding and reducing the in-orbit instrumental backgrounds are essential to achieving high sensitivity in hard X-ray astronomical observations. The observational data of the Hard X-ray Imager (HXI) on board the Hitomi satellite provides useful information on the background components, owing to its multi-layer configuration with different atomic numbers: the HXI consists of a stack of four layers of Si (Z = 14) detectors and one layer of CdTe (Z = 48, 52) detector surrounded by well-type BGO (Bi4Ge3O12) active shields. Based on the observational data, the backgrounds of top Si layer, the three underlying Si layers, and the CdTe layer are inferred to be dominated by different components, namely, low-energy electrons, albedo neutrons, and proton-induced radioactivation, respectively. Monte Carlo simulations of the in-orbit background of the HXI reproduce the observed background spectrum of each layer well, thereby verifying the above hypothesis quantitatively. In addition, we suggest the inclusion of an electron shield to reduce the background. △ Less

Submitted 20 November, 2020; originally announced November 2020.

Comments: 12 pages, 8 figures, accepted for publication in JATIS

Brightness modulations of our nearest terrestrial planet Venus reveal atmospheric super-rotation rather than surface features

Authors: Y. J. Lee, A. García Muñoz, T. Imamura, M. Yamada, T. Satoh, A. Yamazaki, S. Watanabe

Abstract: Terrestrial exoplanets orbiting within or near their host stars' habitable zone are potentially apt for life. It has been proposed that time-series measurements of reflected starlight from such planets will reveal their rotational period, main surface features and some atmospheric information. From imagery obtained with the Akatsuki spacecraft, here we show that Venus' brightness at 283, 365, and… ▽ More Terrestrial exoplanets orbiting within or near their host stars' habitable zone are potentially apt for life. It has been proposed that time-series measurements of reflected starlight from such planets will reveal their rotational period, main surface features and some atmospheric information. From imagery obtained with the Akatsuki spacecraft, here we show that Venus' brightness at 283, 365, and 2020 nm is modulated by one or both of two periods of 3.7 and 4.6 days, and typical amplitudes <10% but occasional events of 20-40%. The modulations are unrelated to the solid-body rotation; they are caused by planetary-scale waves superimposed on the super-rotating winds. Here we propose that two modulation periods whose ratio of large-to-small values is not an integer number imply the existence of an atmosphere if detected at an exoplanet, but it remains ambiguous whether the atmosphere is optically thin or thick, as for Earth or Venus respectively. Multi-wavelength and long temporal baseline observations may be required to decide between these scenarios. Ultimately, Venus represents a false positive for interpretations of brightness modulations of terrestrial exoplanets in terms of surface features. △ Less

Submitted 24 November, 2020; v1 submitted 18 November, 2020; originally announced November 2020.

Journal ref: Nature Communications 11 (2020) 5720

Development of a Low-noise Front-end ASIC for CdTe Detectors

Authors: Tenyo Kawamura, Tadashi Orita, Shin'ichiro Takeda, Shin Watanabe, Hirokazu Ikeda, Tadayuki Takahashi

Abstract: We present our latest ASIC, which is used for the readout of Cadmium Telluride double-sided strip detectors (CdTe DSDs) and high spectroscopic imaging. It is implemented in a 0.35 um CMOS technology (X-Fab XH035), consists of 64 readout channels, and has a function that performs simultaneous AD conversion for each channel. The equivalent noise charge of 54.9 e- +/- 11.3 e- (rms) is measured withou… ▽ More We present our latest ASIC, which is used for the readout of Cadmium Telluride double-sided strip detectors (CdTe DSDs) and high spectroscopic imaging. It is implemented in a 0.35 um CMOS technology (X-Fab XH035), consists of 64 readout channels, and has a function that performs simultaneous AD conversion for each channel. The equivalent noise charge of 54.9 e- +/- 11.3 e- (rms) is measured without connecting the ASIC to any detectors. From the spectroscopy measurements using a CdTe single-sided strip detector, the energy resolution of 1.12 keV (FWHM) is obtained at 13.9 keV, and photons within the energy from 6.4 keV to 122.1 keV are detected. Based on the experimental results, we propose a new low-noise readout architecture making use of a slew-rate limited mode at the shaper followed by a peak detector circuit. △ Less

Submitted 31 August, 2020; originally announced September 2020.

Comments: 6 pages, 10 figures, accepted for publication in Nuclear Inst. and Methods in Physics Research, A

Spin-driven evolution of asteroids' top-shapes at fast and slow spins seen from (101955) Bennu and (162173) Ryugu

Authors: Masatoshi Hirabayashi, Ryota Nakano, Eri Tatsumi, Kevin J. Walsh, Olivier S. Barnouin, Patrick Michel, Christine M. Hartzell, Daniel T. Britt, Seiji Sugita, Sei-ichiro Watanabe, William F. Bottke, Daniel J. Scheeres, Ronald-Louis Ballouz, Yuichiro Cho, Tomokatsu Morota, Ellen S. Howell, Dante S. Lauretta

Abstract: Proximity observations by OSIRIS-REx and Hayabusa2 provided clues on the shape evolution processes of the target asteroids, (101955) Bennu and (162173) Ryugu. Their oblate shapes with equatorial ridges, or the so-called top shapes, may have evolved due to their rotational conditions at present and in the past. Different shape evolution scenarios were previously proposed; Bennu's top shape may have… ▽ More Proximity observations by OSIRIS-REx and Hayabusa2 provided clues on the shape evolution processes of the target asteroids, (101955) Bennu and (162173) Ryugu. Their oblate shapes with equatorial ridges, or the so-called top shapes, may have evolved due to their rotational conditions at present and in the past. Different shape evolution scenarios were previously proposed; Bennu's top shape may have been driven by surface processing, while Ryugu's may have been developed due to large deformation. These two scenarios seem to be inconsistent. Here, we revisit the structural analyses in earlier works and fill a gap to connect these explanations. We also apply a semi-analytical technique for computing the cohesive strength distribution in a uniformly rotating triaxial ellipsoid to characterize the global failure of top-shaped bodies. Assuming that the structure is uniform, our semi-analytical approach describes the spatial variations in failed regions at different spin periods; surface regions are the most sensitive at longer spin periods, while interiors fail structurally at shorter spin periods. This finding suggests that the shape evolution of a top shape may vary due to rotation and internal structure, which can explain the different evolution scenarios of Bennu's and Ryugu's top shapes. We interpret our results as the indications of top shapes' various evolution processes. △ Less

Submitted 10 August, 2020; originally announced August 2020.

Comments: 27 pages, 1 table, 7 figures, In Press in Icarus (2020)

Journal ref: Icarus, Volume 352, 113946 (2020)

Imaging and Spectral Performance of a 60 μm Pitch CdTe Double-Sided Strip Detector

Authors: Kento Furukawa, Shunsaku Nagasawa, Lindsay Glesener, Miho Katsuragawa, Shin'ichiro Takeda, Shin Watanabe, Tadayuki Takahashi

Abstract: We have evaluated the performance of a fine pitch CdTe Double-sided Strip Detector (CdTe-DSD), which was originally developed for the focal plane detector of a hard X-ray telescope to observe the Sun. The detector has a thickness of 750 um and has 128 strip electrodes with a 60 um strip pitch orthogonally placed on both sides of the detector and covers an energy range 4 keV to 80 keV. The study of… ▽ More We have evaluated the performance of a fine pitch CdTe Double-sided Strip Detector (CdTe-DSD), which was originally developed for the focal plane detector of a hard X-ray telescope to observe the Sun. The detector has a thickness of 750 um and has 128 strip electrodes with a 60 um strip pitch orthogonally placed on both sides of the detector and covers an energy range 4 keV to 80 keV. The study of the depth of photon interaction and charge sharing effects are of importance in order to provide good spectroscopic and imaging performance. We study the tail structure observed in the spectra caused by charge trapping and develop a new method to reconstruct the spectra based on induced charge information from both anode and cathode strips. By applying this method, energy resolutions (FWHM) of 0.76 keV and 1.0 keV can be obtained at photon energies of 14 keV and 60 keV, respectively, if the energy difference between the anode and cathode is within 1 keV. Furthermore, the tail component at 60 keV is reduced, and the energy resolution of the 60 keV peak is improved from 2.4 keV to 1.5 keV (FWHM) if the energy difference is greater than 1 keV. In order to study the imaging performance, we constructed a simple imaging system using a 5 mm thick tungsten plate that has a pinhole with a diameter of 100 um. We utilize a Ba-133 radioisotope of 1 mm in diameter as a target source in combination with a 100 um slit made from 0.5 mm thickness tungsten. We imaged the Ba-133 source behind the 100 um slit using a 30 keV peak, with a 100 um pinhole placed at the center of the source-detector distance. By applying a charge sharing correction between strips, we have succeeded in obtaining a position resolution better than the strip pitch of 60 um. △ Less

Submitted 10 June, 2020; originally announced June 2020.

Comments: 7 pages, 13 figures, accepted for publication in Nuclear Inst. and Methods in Physics Research, A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 978 (2020) 164378

Planetary-scale variations in winds and UV brightness at the Venusian cloud top: Periodicity and temporal evolution

Authors: Masataka Imai, Toru Kouyama, Yukihiro Takahashi, Atsushi Yamazaki, Shigeto Watanabe, Manabu Yamada, Takeshi Imamura, Takehiko Satoh, Masato Nakamura, Shin-ya Murakami, Kazunori Ogohara, Takeshi Horinouchi

Abstract: Planetary-scale waves at the Venusian cloud-top cause periodic variations in both winds and ultraviolet (UV) brightness. While the wave candidates are the 4-day Kelvin wave and 5-day Rossby wave with zonal wavenumber 1, their temporal evolutions are poorly understood. Here we conducted a time series analysis of the 365-nm brightness and cloud-tracking wind variations, obtained by the UV Imager onb… ▽ More Planetary-scale waves at the Venusian cloud-top cause periodic variations in both winds and ultraviolet (UV) brightness. While the wave candidates are the 4-day Kelvin wave and 5-day Rossby wave with zonal wavenumber 1, their temporal evolutions are poorly understood. Here we conducted a time series analysis of the 365-nm brightness and cloud-tracking wind variations, obtained by the UV Imager onboard the Japanese Venus Climate Orbiter Akatsuki from June to October 2017, revealing a dramatic evolution of planetary-scale waves and corresponding changes in planetary-scale UV features. We identified a prominent 5-day periodicity in both the winds and brightness variations, whose phase velocities were slower than the dayside mean zonal winds (or the super-rotation) by >35 m s$^{-1}$. The reconstructed planetary-scale vortices were nearly equatorially symmetric and centered at ~35° latitude in both hemispheres, which indicated that they were part of a Rossby wave. The amplitude of winds variation associated with the observed Rossby wave packet were amplified gradually over ~20 days and attenuated over ~50 days. Following the formation of the Rossby wave vortices, brightness variation emerges to form rippling white cloud belts in the 45°-60° latitudes of both hemispheres. ~3.8-day periodic signals were observed in the zonal wind and brightness variations in the equatorial region before the Rossby wave amplification. Although the amplitude and significance of the 3.8-day mode were relatively low in the observation season, this feature is consistent with a Kelvin wave, which may be the cause of the dark clusters in the equatorial region. △ Less

Submitted 18 September, 2019; v1 submitted 22 August, 2019; originally announced August 2019.

Comments: 44 pages, 19 figures

Characterization of diffuse X-ray emission from IGR~J17448-3232: an implication of a line of sight merging activity

Authors: Shoko Watanabe, Shigeo Yamauchi, Kumiko K. Nobukawa, Hiroki Akamatsu

Abstract: Results of the spectral analysis for the galaxy cluster IGR J17448-3232 are presented. The intracluster medium (ICM) in the central region (r<300", 320 kpc) has a high electron temperature plasma of kTe~13-15 keV and an ionization temperature estimated from an intensity ratio of Fe XXVI Ly alpha/Fe XXV He alpha lines is lower than the electron temperature, which suggests that the ICM is in the non… ▽ More Results of the spectral analysis for the galaxy cluster IGR J17448-3232 are presented. The intracluster medium (ICM) in the central region (r<300", 320 kpc) has a high electron temperature plasma of kTe~13-15 keV and an ionization temperature estimated from an intensity ratio of Fe XXVI Ly alpha/Fe XXV He alpha lines is lower than the electron temperature, which suggests that the ICM is in the non-ionization equilibrium (NEI) state. The spectrum in the central region can be also fitted with a two-component model: a two-temperature plasma model in a collisional ionization equilibrium (CIE) with temperatures of 7.9 keV and >34 keV or a CIE+power law model with a temperature of 9.4 keV and a photon index of 1.1. The two component models can represent the intensity ratio of Fe XXVI Ly alpha/Fe XXV He alpha lines. On the other hand, the spectrum in the outer region (r>300'') can be explained by a single CIE plasma model with a temperature of 5-8 keV. Based on the spectral feature and its circular structure, we propose that the NEI plasma was produced by merging along the line-of-sight direction. △ Less

Submitted 18 August, 2019; originally announced August 2019.

Comments: Accepted for publication in PASJ

Long-term variations of Venus' 365-nm albedo observed by Venus Express, Akatsuki, MESSENGER, and Hubble Space Telescope

Authors: Yeon Joo Lee, Kandis-Lea Jessup, Santiago Perez-Hoyos, Dmitrij V. Titov, Sebastien Lebonnois, Javier Peralta, Takeshi Horinouchi, Takeshi Imamura, Sanjay Limaye, Emmanuel Marcq, Masahiro Takagi, Atsushi Yamazaki, Manabu Yamada, Shigeto Watanabe, Shin-ya Murakami, Kazunori Ogohara, William M. McClintock, Gregory Holsclaw, Anthony Roman

Abstract: An unknown absorber near the cloud top level of Venus generates a broad absorption feature from the ultraviolet (UV) to visible, peaking around 360 nm, and therefore plays a critical role in the solar energy absorption. We present a quantitative study on the variability of the cloud albedo at 365 nm and its impact on Venus' solar heating rates based on an analysis of Venus Express and Akatsuki's U… ▽ More An unknown absorber near the cloud top level of Venus generates a broad absorption feature from the ultraviolet (UV) to visible, peaking around 360 nm, and therefore plays a critical role in the solar energy absorption. We present a quantitative study on the variability of the cloud albedo at 365 nm and its impact on Venus' solar heating rates based on an analysis of Venus Express and Akatsuki's UV images, and Hubble Space Telescope and MESSENGER's UV spectral data; in this analysis the calibration correction factor of the UV images of Venus Express (VMC) is updated relative to the Hubble and MESSENGER albedo measurements. Our results indicate that the 365-nm albedo varied by a factor of 2 from 2006 to 2017 over the entire planet, producing a 25-40% change in the low latitude solar heating rate according to our radiative transfer calculations. Thus, the cloud top level atmosphere should have experienced considerable solar heating variations over this period. Our global circulation model calculations show that this variable solar heating rate may explain the observed variations of zonal wind from 2006 to 2017. Overlaps in the timescale of the long-term UV albedo and the solar activity variations make it plausible that solar extreme UV intensity and cosmic-ray variations influenced the observed albedo trends. The albedo variations might also be linked with temporal variations of the upper cloud SO2 gas abundance, which affects the H2SO4-H2O aerosol formation. △ Less

Submitted 22 July, 2019; originally announced July 2019.

Comments: 22 pages, 16 figures, accepted

The Western Bulge of 162173 Ryugu Formed as a Result of a Rotationally Driven Deformation Process

Authors: Masatoshi Hirabayashi, Eri Tatsumi, Hideaki Miyamoto, Goro Komatsu, Seiji Sugita, Sei-ichiro Watanabe, Daniel J. Scheeres, Olivier S. Barnouin, Patrick Michel, Chikatoshi Honda, Tatsuhiro Michikami, Yuichiro Cho, Tomokatsu Morota, Naru Hirata, Naoyuki Hirata, Naoya Sakatani, Stephen R. Schwartz, Rie Honda, Yasuhiro Yokota, Shingo Kameda, Hidehiko Suzuki, Toru Kouyama, Masahiko Hayakawa, Moe Matsuoka, Kazuo Yoshioka , et al. (4 additional authors not shown)

Abstract: 162173 Ryugu, the target of Hayabusa2, has a round shape with an equatorial ridge, which is known as a spinning top-shape. A strong centrifugal force is a likely contributor to Ryugu's top-shaped features. Observations by Optical Navigation Camera onboard Hayabusa2 show a unique longitudinal variation in geomorphology; the western side of this asteroid, later called the western bulge, has a smooth… ▽ More 162173 Ryugu, the target of Hayabusa2, has a round shape with an equatorial ridge, which is known as a spinning top-shape. A strong centrifugal force is a likely contributor to Ryugu's top-shaped features. Observations by Optical Navigation Camera onboard Hayabusa2 show a unique longitudinal variation in geomorphology; the western side of this asteroid, later called the western bulge, has a smooth surface and a sharp equatorial ridge, compared to the other side. Here, we propose a structural deformation process that generated the western bulge. Applying the mission-derived shape model, we employ a finite element model technique to analyze the locations that experience structural failure within the present shape. Assuming that materials are uniformly distributed, our model shows the longitudinal variation in structurally failed regions when the spin period is shorter than ~3.75 h. Ryugu is structurally intact in the subsurface region of the western bulge while other regions are sensitive to structural failure. We infer that this variation is indicative of the deformation process that occurred in the past, and the western bulge is more relaxed structurally than the other region. Our analysis also shows that this deformation process might occur at a spin period between ~3.5 h and ~3.0 h, providing the cohesive strength ranging between ~4 Pa and ~10 Pa. △ Less

Submitted 6 April, 2019; originally announced April 2019.

Comments: 8 pages, 5 figures, published in the Astrophysical Journal Letters, 874, 1, L10

Detection of polarized gamma-ray emission from the Crab nebula with Hitomi Soft Gamma-ray Detector

Authors: Hitomi Collaboration, Felix Aharonian, Hiroki Akamatsu, Fumie Akimoto, Steven W. Allen, Lorella Angelini, Marc Audard, Hisamitsu Awaki, Magnus Axelsson, Aya Bamba, Marshall W. Bautz, Roger Blandford, Laura W. Brenneman, Gregory V. Brown, Esra Bulbul, Edward M. Cackett, Maria Chernyakova, Meng P. Chiao, Paolo S. Coppi, Elisa Costantini, Jelle de Plaa, Cor P. de Vries, Jan-Willem den Herder, Chris Done, Tadayasu Dotani , et al. (169 additional authors not shown)

Abstract: We present the results from the Hitomi Soft Gamma-ray Detector (SGD) observation of the Crab nebula. The main part of SGD is a Compton camera, which in addition to being a spectrometer, is capable of measuring polarization of gamma-ray photons. The Crab nebula is one of the brightest X-ray / gamma-ray sources on the sky, and, the only source from which polarized X-ray photons have been detected. S… ▽ More We present the results from the Hitomi Soft Gamma-ray Detector (SGD) observation of the Crab nebula. The main part of SGD is a Compton camera, which in addition to being a spectrometer, is capable of measuring polarization of gamma-ray photons. The Crab nebula is one of the brightest X-ray / gamma-ray sources on the sky, and, the only source from which polarized X-ray photons have been detected. SGD observed the Crab nebula during the initial test observation phase of Hitomi. We performed the data analysis of the SGD observation, the SGD background estimation and the SGD Monte Carlo simulations, and, successfully detected polarized gamma-ray emission from the Crab nebula with only about 5 ks exposure time. The obtained polarization fraction of the phase-integrated Crab emission (sum of pulsar and nebula emissions) is (22.1 $\pm$ 10.6)% and, the polarization angle is 110.7$^o$ + 13.2 / $-$13.0$^o$ in the energy range of 60--160 keV (The errors correspond to the 1 sigma deviation). The confidence level of the polarization detection was 99.3%. The polarization angle measured by SGD is about one sigma deviation with the projected spin axis of the pulsar, 124.0$^o$ $\pm$0.1$^o$. △ Less

Submitted 1 October, 2018; originally announced October 2018.

Comments: 19 pages, 18 figures, 6 tables. Accepted for publication in PASJ

In-orbit performance and calibration of the Hard X-ray Imager onboard Hitomi (ASTRO-H)

Authors: Kouichi Hagino, Kazuhiro Nakazawa, Goro Sato, Motohide Kokubun, Teruaki Enoto, Yasushi Fukazawa, Katsuhiro Hayashi, Jun Kataoka, Junichiro Katsuta, Shogo B. Kobayashi, Philippe Laurent, Francois Lebrun, Olivier Limousin, Daniel Maier, Kazuo Makishima, Taketo Mimura, Katsuma Miyake, Tsunefumi Mizuno, Kunishiro Mori, Hiroaki Murakami, Takeshi Nakamori, Toshio Nakano, Hirofumi Noda, Hirokazu Odaka, Masanori Ohno , et al. (15 additional authors not shown)

Abstract: The Hard X-ray Imager (HXI) onboard Hitomi (ASTRO-H) is an imaging spectrometer covering hard X-ray energies of 5-80 keV. Combined with the hard X-ray telescope, it enables imaging spectroscopy with an angular resolution of $1^\prime.7$ half-power diameter, in a field of view of $9^\prime\times9^\prime$. The main imager is composed of 4 layers of Si detectors and 1 layer of CdTe detector, stacked… ▽ More The Hard X-ray Imager (HXI) onboard Hitomi (ASTRO-H) is an imaging spectrometer covering hard X-ray energies of 5-80 keV. Combined with the hard X-ray telescope, it enables imaging spectroscopy with an angular resolution of $1^\prime.7$ half-power diameter, in a field of view of $9^\prime\times9^\prime$. The main imager is composed of 4 layers of Si detectors and 1 layer of CdTe detector, stacked to cover wide energy band up to 80 keV, surrounded by an active shield made of BGO scintillator to reduce the background. The HXI started observations 12 days before the Hitomi loss, and successfully obtained data from G21.5$-$0.9, Crab and blank sky. Utilizing these data, we calibrate the detector response and study properties of in-orbit background. The observed Crab spectra agree well with a powerlaw model convolved with the detector response, within 5% accuracy. We find that albedo electrons in specified orbit strongly affect the background of Si top layer, and establish a screening method to reduce it. The background level over the full field of view after all the processing and screening is as low as the pre-flight requirement of $1$-$3\times10^{-4}$ counts s$^{-1}$ cm$^{-2}$ keV$^{-1}$. △ Less

Submitted 21 May, 2018; originally announced May 2018.

Comments: 46 pages, 18 figures, published in Journal of Astronomical Telescopes, Instruments, and Systems

Imaging and spectral performance of CdTe double-sided strip detectors for the Hard X-ray Imager onboard ASTRO-H

Authors: Kouichi Hagino, Hirokazu Odaka, Goro Sato, Shin Watanabe, Shin'ichiro Takeda, Motohide Kokubun, Taro Fukuyama, Shinya Saito, Tamotsu Sato, Yuto Ichinohe, Tadayuki Takahashi, Toshio Nakano, Kazuhiro Nakazawa, Kazuo Makishima, Hiroyasu Tajima, Takaaki Tanaka, Kazunori Ishibashi, Takuya Miyazawa, Michito Sakai, Karin Sakanobe, Hiroyoshi Kato, Shunya Takizawa, Kentaro Uesugi

Abstract: The imaging and spectral performance of CdTe double-sided strip detectors (CdTe-DSDs) was evaluated for the ASTRO-H mission. The charcterized CdTe-DSDs have a strip pitch of 0.25 mm, an imaging area of 3.2 cm$\times$3.2 cm and a thickness of 0.75 mm. The detector was successfully operated at a temperature of $-20^\circ$C and with an applied bias voltage of 250 V. By using two-strip events as well… ▽ More The imaging and spectral performance of CdTe double-sided strip detectors (CdTe-DSDs) was evaluated for the ASTRO-H mission. The charcterized CdTe-DSDs have a strip pitch of 0.25 mm, an imaging area of 3.2 cm$\times$3.2 cm and a thickness of 0.75 mm. The detector was successfully operated at a temperature of $-20^\circ$C and with an applied bias voltage of 250 V. By using two-strip events as well as one-strip events for the event reconstruction, a good energy resolution of 2.0 keV at 59.5 keV and a sub-strip spatial resolution was achieved. The hard X-ray and gamma-ray response of CdTe-DSDs is complex due to the properties of CdTe and the small pixel effect. Therefore, one of the issues to investigate is the response of the CdTe-DSD. In order to investigate the spatial dependence of the detector response, we performed fine beam scan experiments at SPring-8, a synchrotron radiation facility. From these experiments, the depth structure of the electric field was determined as well as properties of carriers in the detector and successfully reproduced the experimental data with simulated spectra. △ Less

Submitted 20 May, 2018; originally announced May 2018.

Comments: 11 pages, 11 figures, published in proceedings for SPIE Astronomical Telescopes + Instrumentation in 2012

Modeling of proton-induced radioactivation background in hard X-ray telescopes: Geant4-based simulation and its demonstration by Hitomi's measurement in a low Earth orbit

Authors: Hirokazu Odaka, Makoto Asai, Kouichi Hagino, Tatsumi Koi, Greg Madejski, Tsunefumi Mizuno, Masanori Ohno, Shinya Saito, Tamotsu Sato, Dennis H. Wright, Teruaki Enoto, Yasushi Fukazawa, Katsuhiro Hayashi, Jun Kataoka, Junichiro Katsuta, Madoka Kawaharada, Shogo B. Kobayashi, Motohide Kokubun, Philippe Laurent, Francois Lebrun, Olivier Limousin, Daniel Maier, Kazuo Makishima, Taketo Mimura, Katsuma Miyake , et al. (25 additional authors not shown)

Abstract: Hard X-ray astronomical observatories in orbit suffer from a significant amount of background due to radioactivation induced by cosmic-ray protons and/or geomagnetically trapped protons. Within the framework of a full Monte Carlo simulation, we present modeling of in-orbit instrumental background dominated by radioactivation. To reduce the computation time required by straightforward simulations o… ▽ More Hard X-ray astronomical observatories in orbit suffer from a significant amount of background due to radioactivation induced by cosmic-ray protons and/or geomagnetically trapped protons. Within the framework of a full Monte Carlo simulation, we present modeling of in-orbit instrumental background dominated by radioactivation. To reduce the computation time required by straightforward simulations of delayed emissions from activated isotopes, we insert a semi-analytical calculation that converts production probabilities of radioactive isotopes by interaction of the primary protons into decay rates at measurement time of all secondary isotopes. Therefore, our simulation method is separated into three steps: (1) simulation of isotope production, (2) semi-analytical conversion to decay rates, and (3) simulation of decays of the isotopes at measurement time. This method is verified by a simple setup that has a CdTe semiconductor detector, and shows a 100-fold improvement in efficiency over the straightforward simulation. The simulation framework was tested against data measured with a CdTe sensor in the Hard X-ray Imager onboard the Hitomi X-ray Astronomy Satellite, which was put into a low Earth orbit with an altitude of 570 km and an inclination of 31 degrees, and thus experienced a large amount of irradiation from geomagnetically trapped protons during its passages through the South Atlantic Anomaly. The simulation is able to treat full histories of the proton irradiation and multiple measurement windows. The simulation results agree very well with the measured data, showing that the measured background is well described by the combination of proton-induced radioactivation of the CdTe detector itself and thick Bi4Ge3O12 scintillator shields, leakage of cosmic X-ray background and albedo gamma-ray radiation, and emissions from naturally contaminated isotopes in the detector system. △ Less

Submitted 3 April, 2018; originally announced April 2018.

Comments: 18 pages, 13 figures

Journal ref: Nuclear Instruments and Methods in Physics Research Section A, 891, 92-105 (2018)

Monte-Carlo simulations of the detailed iron absorption line profiles from thermal winds in X-ray binaries

Authors: Ryota Tomaru, Chris Done, Hirokazu Odaka, Shin Watanabe, Tadayuki Takahashi

Abstract: Blue shifted absorption lines from highly ionised iron are seen in some high inclination X-ray binary systems, indicating the presence of an equatorial disc wind. This launch mechanism is under debate, but thermal driving should be ubiquitous. X-ray irradiation from the central source heats disc surface, forming a wind from the outer disc where the local escape velocity is lower than the sound spe… ▽ More Blue shifted absorption lines from highly ionised iron are seen in some high inclination X-ray binary systems, indicating the presence of an equatorial disc wind. This launch mechanism is under debate, but thermal driving should be ubiquitous. X-ray irradiation from the central source heats disc surface, forming a wind from the outer disc where the local escape velocity is lower than the sound speed. The mass loss rate from each part of the disc is determined by the luminosity and spectral shape of the central source. We use these together with an assumed density and velocity structure of the wind to predict the column density and ionisation state, then combine this with a Monte Carlo radiation transfer to predict the detailed shape of the absorption (and emission) line profiles. We test this on the persistent wind seen in the bright neutron star binary GX 13+1, with luminosity L/LEdd ~ 0.5. We approximately include the effect of radiation pressure because of high luminosity, and compute line features. We compare these to the highest resolution data, the Chandra third order grating spectra, which we show here for the first time. This is the first physical model for the wind in this system, and it succeeds in reproducing many of the features seen in the data, showing that the wind in GX13+1 is most likely a thermal-radiation driven wind. This approach, combined with better streamline structures derived from full radiation hydrodynamic simulations, will allow future calorimeter data to explore the detail wind structure. △ Less

Submitted 20 February, 2018; originally announced February 2018.

Comments: 10 pages, 13 figures , Accepted by MNRAS

Hitomi X-ray Observation of the Pulsar Wind Nebula G21.5$-$0.9

Authors: Hitomi Collaboration, Felix Aharonian, Hiroki Akamatsu, Fumie Akimoto, Steven W. Allen, Lorella Angelini, Marc Audard, Hisamitsu Awaki, Magnus Axelsson, Aya Bamba, Marshall W. Bautz, Roger Blandford, Laura W. Brenneman, Gregory V. Brown, Esra Bulbul, Edward M. Cackett, Maria Chernyakova, Meng P. Chiao, Paolo S. Coppi, Elisa Costantini, Jelle de Plaa, Cor P. de Vries, Jan-Willem den Herder, Chris Done, Tadayasu Dotani , et al. (173 additional authors not shown)

Abstract: We present results from the Hitomi X-ray observation of a young composite-type supernova remnant (SNR) G21.5$-$0.9, whose emission is dominated by the pulsar wind nebula (PWN) contribution. The X-ray spectra in the 0.8-80 keV range obtained with the Soft X-ray Spectrometer (SXS), Soft X-ray Imager (SXI) and Hard X-ray Imager (HXI) show a significant break in the continuum as previously found with… ▽ More We present results from the Hitomi X-ray observation of a young composite-type supernova remnant (SNR) G21.5$-$0.9, whose emission is dominated by the pulsar wind nebula (PWN) contribution. The X-ray spectra in the 0.8-80 keV range obtained with the Soft X-ray Spectrometer (SXS), Soft X-ray Imager (SXI) and Hard X-ray Imager (HXI) show a significant break in the continuum as previously found with the NuSTAR observation. After taking into account all known emissions from the SNR other than the PWN itself, we find that the Hitomi spectra can be fitted with a broken power law with photon indices of $Γ_1=1.74\pm0.02$ and $Γ_2=2.14\pm0.01$ below and above the break at $7.1\pm0.3$ keV, which is significantly lower than the NuSTAR result ($\sim9.0$ keV). The spectral break cannot be reproduced by time-dependent particle injection one-zone spectral energy distribution models, which strongly indicates that a more complex emission model is needed, as suggested by recent theoretical models. We also search for narrow emission or absorption lines with the SXS, and perform a timing analysis of PSR J1833$-$1034 with the HXI and SGD. No significant pulsation is found from the pulsar. However, unexpectedly, narrow absorption line features are detected in the SXS data at 4.2345 keV and 9.296 keV with a significance of 3.65 $σ$. While the origin of these features is not understood, their mere detection opens up a new field of research and was only possible with the high resolution, sensitivity and ability to measure extended sources provided by an X-ray microcalorimeter. △ Less

Submitted 14 February, 2018; originally announced February 2018.

Comments: 16 pages, 8 figures, 4 tables. Accepted for publication in PASJ

Search For Gravitational Redshifted Absorption Lines In LMXB Serpens X-1

Authors: Hiroki Yoneda, Chris Done, Frits Paerels, Tadayuki Takahashi, Shin Watanabe

Abstract: The equation of state for ultra-dense matter can be tested from observations of the ratio of mass to radius of neutron stars. This could be measured precisely from the redshift of a narrow line produced on the surface. X-rays bursts have been intensively searched for such features, but so far without detection. Here instead we search for redshifted lines in the persistent emission, where the accre… ▽ More The equation of state for ultra-dense matter can be tested from observations of the ratio of mass to radius of neutron stars. This could be measured precisely from the redshift of a narrow line produced on the surface. X-rays bursts have been intensively searched for such features, but so far without detection. Here instead we search for redshifted lines in the persistent emission, where the accretion flow dominates over the surface emission. We discuss the requirements for narrow lines to be produced, and show that narrow absorption lines from highly ionized iron can potentially be observable in accreting low mass X-ray binaries (low B field) which have either low spin or low inclination so that Doppler broadening is small. This selects Serpens X-1 as the only potential candidate persistent LMXB due to its low inclination. Including surface models in the broad band accretion flow model predicts that the absorption line from He-like iron at 6.7 keV should be redshifted to $\sim$ 5.1 - 5.7 keV (10 - 15 km for $1.4\mathrm{M_\odot}$) and have an equivalent width of 0.8 - 8.0 eV for surface temperatures of 7 - 10 $\times$ 10$^6$ K. We use the high resolution Chandra grating data to give a firm upper limit of 2 - 3 eV for an absorption line at $\sim 5$ keV. We discuss possible reasons for this lack of detection (the surface temperature and the geometry of the boundary layer etc.). Future instruments with better sensitivity are required in order to explore the existence of such features. △ Less

Submitted 24 December, 2017; originally announced December 2017.

Comments: 11 pages, 12 figures, accepted for publication in MNRAS

Temperature Structure in the Perseus Cluster Core Observed with Hitomi

Authors: Hitomi Collaboration, Felix Aharonian, Hiroki Akamatsu, Fumie Akimoto, Steven W. Allen, Lorella Angelini, Marc Audard, Hisamitsu Awaki, Magnus Axelsson, Aya Bamba, Marshall W. Bautz, Roger Blandford, Laura W. Brenneman, Gregory V. Brown, Esra Bulbul, Edward M. Cackett, Maria Chernyakova, Meng P. Chiao, Paolo S. Coppi, Elisa Costantini, Jelle de Plaa, Cor P. de Vries, Jan-Willem den Herder, Chris Done, Tadayasu Dotani , et al. (170 additional authors not shown)

Abstract: The present paper investigates the temperature structure of the X-ray emitting plasma in the core of the Perseus cluster using the 1.8--20.0 keV data obtained with the Soft X-ray Spectrometer (SXS) onboard the Hitomi Observatory. A series of four observations were carried out, with a total effective exposure time of 338 ks and covering a central region $\sim7'$ in diameter. The SXS was operated wi… ▽ More The present paper investigates the temperature structure of the X-ray emitting plasma in the core of the Perseus cluster using the 1.8--20.0 keV data obtained with the Soft X-ray Spectrometer (SXS) onboard the Hitomi Observatory. A series of four observations were carried out, with a total effective exposure time of 338 ks and covering a central region $\sim7'$ in diameter. The SXS was operated with an energy resolution of $\sim$5 eV (full width at half maximum) at 5.9 keV. Not only fine structures of K-shell lines in He-like ions but also transitions from higher principal quantum numbers are clearly resolved from Si through Fe. This enables us to perform temperature diagnostics using the line ratios of Si, S, Ar, Ca, and Fe, and to provide the first direct measurement of the excitation temperature and ionization temperature in the Perseus cluster. The observed spectrum is roughly reproduced by a single temperature thermal plasma model in collisional ionization equilibrium, but detailed line ratio diagnostics reveal slight deviations from this approximation. In particular, the data exhibit an apparent trend of increasing ionization temperature with increasing atomic mass, as well as small differences between the ionization and excitation temperatures for Fe, the only element for which both temperatures can be measured. The best-fit two-temperature models suggest a combination of 3 and 5 keV gas, which is consistent with the idea that the observed small deviations from a single temperature approximation are due to the effects of projection of the known radial temperature gradient in the cluster core along the line of sight. Comparison with the Chandra/ACIS and the XMM-Newton/RGS results on the other hand suggests that additional lower-temperature components are present in the ICM but not detectable by Hitomi SXS given its 1.8--20 keV energy band. △ Less

Submitted 18 December, 2017; originally announced December 2017.

Comments: 29 pages, 19 figures, 9 tables. Accepted for publication in PASJ

Atomic data and spectral modeling constraints from high-resolution X-ray observations of the Perseus cluster with Hitomi

Authors: Hitomi Collaboration, Felix Aharonian, Hiroki Akamatsu, Fumie Akimoto, Steven W. Allen, Lorella Angelini, Marc Audard, Hisamitsu Awaki, Magnus Axelsson, Aya Bamba, Marshall W. Bautz, Roger Blandford, Laura W. Brenneman, Gregory V. Brown, Esra Bulbul, Edward M. Cackett, Maria Chernyakova, Meng P. Chiao, Paolo S. Coppi, Elisa Costantini, Jelle de Plaa, Cor P. de Vries, Jan-Willem den Herder, Chris Done, Tadayasu Dotani , et al. (170 additional authors not shown)

Abstract: The Hitomi SXS spectrum of the Perseus cluster, with $\sim$5 eV resolution in the 2-9 keV band, offers an unprecedented benchmark of the atomic modeling and database for hot collisional plasmas. It reveals both successes and challenges of the current atomic codes. The latest versions of AtomDB/APEC (3.0.8), SPEX (3.03.00), and CHIANTI (8.0) all provide reasonable fits to the broad-band spectrum, a… ▽ More The Hitomi SXS spectrum of the Perseus cluster, with $\sim$5 eV resolution in the 2-9 keV band, offers an unprecedented benchmark of the atomic modeling and database for hot collisional plasmas. It reveals both successes and challenges of the current atomic codes. The latest versions of AtomDB/APEC (3.0.8), SPEX (3.03.00), and CHIANTI (8.0) all provide reasonable fits to the broad-band spectrum, and are in close agreement on best-fit temperature, emission measure, and abundances of a few elements such as Ni. For the Fe abundance, the APEC and SPEX measurements differ by 16%, which is 17 times higher than the statistical uncertainty. This is mostly attributed to the differences in adopted collisional excitation and dielectronic recombination rates of the strongest emission lines. We further investigate and compare the sensitivity of the derived physical parameters to the astrophysical source modeling and instrumental effects. The Hitomi results show that an accurate atomic code is as important as the astrophysical modeling and instrumental calibration aspects. Substantial updates of atomic databases and targeted laboratory measurements are needed to get the current codes ready for the data from the next Hitomi-level mission. △ Less

Submitted 14 December, 2017; originally announced December 2017.

Comments: 46 pages, 25 figures, 11 tables. Accepted for publication in PASJ

Hitomi Observations of the LMC SNR N132D: Highly Redshifted X-ray Emission from Iron Ejecta

Authors: Hitomi Collaboration, Felix Aharonian, Hiroki Akamatsu, Fumie Akimoto, Steven W. Allen, Lorella Angelini, Marc Audard, Hisamitsu Awaki, Magnus Axelsson, Aya Bamba, Marshall W. Bautz, Roger Blandford, Laura W. Brenneman, Gregory V. Brown, Esra Bulbul, Edward M. Cackett, Maria Chernyakova, Meng P. Chiao, Paolo S. Coppi, Elisa Costantini, Jelle de Plaa, Cor P. de Vries, Jan-Willem den Herder, Chris Done, Tadayasu Dotani , et al. (169 additional authors not shown)

Abstract: We present Hitomi observations of N132D, a young, X-ray bright, O-rich core-collapse supernova remnant in the Large Magellanic Cloud (LMC). Despite a very short observation of only 3.7 ks, the Soft X-ray Spectrometer (SXS) easily detects the line complexes of highly ionized S K and Fe K with 16-17 counts in each. The Fe feature is measured for the first time at high spectral resolution. Based on t… ▽ More We present Hitomi observations of N132D, a young, X-ray bright, O-rich core-collapse supernova remnant in the Large Magellanic Cloud (LMC). Despite a very short observation of only 3.7 ks, the Soft X-ray Spectrometer (SXS) easily detects the line complexes of highly ionized S K and Fe K with 16-17 counts in each. The Fe feature is measured for the first time at high spectral resolution. Based on the plausible assumption that the Fe K emission is dominated by He-like ions, we find that the material responsible for this Fe emission is highly redshifted at ~800 km/s compared to the local LMC interstellar medium (ISM), with a 90% credible interval of 50-1500 km/s if a weakly informative prior is placed on possible line broadening. This indicates (1) that the Fe emission arises from the supernova ejecta, and (2) that these ejecta are highly asymmetric, since no blue-shifted component is found. The S K velocity is consistent with the local LMC ISM, and is likely from swept-up ISM material. These results are consistent with spatial mapping that shows the He-like Fe concentrated in the interior of the remnant and the S tracing the outer shell. The results also show that even with a very small number of counts, direct velocity measurements from Doppler-shifted lines detected in extended objects like supernova remnants are now possible. Thanks to the very low SXS background of ~1 event per spectral resolution element per 100 ks, such results are obtainable during short pointed or slew observations with similar instruments. This highlights the power of high-spectral-resolution imaging observations, and demonstrates the new window that has been opened with Hitomi and will be greatly widened with future missions such as the X-ray Astronomy Recovery Mission (XARM) and Athena. △ Less

Submitted 6 December, 2017; originally announced December 2017.

Comments: 18 pages, 15 figures, 1 table. Accepted for publication by PASJ