A lead service line (LSL, also known as lead service pipe,[1] and lead connection pipe[2]) is a pipe made of lead which is used in potable water distribution to connect a water main to a user's premises.
![](http://178.128.105.246/cars-http-upload.wikimedia.org/wikipedia/commons/thumb/a/ae/DC_WASA_lead_water_main_-_cropped.jpg/220px-DC_WASA_lead_water_main_-_cropped.jpg)
This article may require cleanup to meet Wikipedia's quality standards. The specific problem is: Some content is more related to Plumbosolvency and should be moved or the articles merged. (June 2023) |
Lead exposure is a public health hazard as it causes developmental effects in fetuses, infants, and young children. It also has other health effects in adults. According to the World Health Organization, the presence of lead service lines is the most significant contributor of lead contamination in drinking water in many countries.[3]
The most certain way to eliminate lead exposure in drinking water from the lead service lines is to replace them with pipes made from other materials. However, replacement is time-consuming and costly. The difficulty is exacerbated in many locations by ownership structure with a shared responsibility between water utilities and property owners, which requires cooperation between the two entities. Some water utilities employ corrosion control as a short-term solution while working through long-term replacement projects. A potential issue with corrosion control is constant monitoring of its effectiveness. There have been widespread lead exposures resulting from failures of corrosion control, such as the Flint water crisis.
Background
editLead had been associated with plumbing since the ancient times. The chemical symbol for lead (Pb) is derived from the Latin word plumbum, which means 'waterworks' or 'plumbing' as lead was used to make water pipes.[4] Lead water lines have also been known to be harmful since ancient times, though this is contested by industry trade groups within the United States.[5][6] Lead pipes were preferred over iron pipes because they lasted longer and were more flexible.[7]
In modern times, lead was still widely used in water distribution systems and plumbing hardware before the early 20th century, including lead pipes, leaded solder and leaded alloys.[8] One part of the system is the connections between the water mains and the water user locations. A service line is a pipe that makes the connection, which was also made of lead in those days. The first portion of the service line is called a gooseneck, which connects to a valve at the water main and is required to be flexible to allow some movement. Lead goosenecks (also called lead service connections or LSCs) were commonly used in the past due to their durability and flexibility.[9][10] In colder-weather areas, the connection between the water main and the rest of the service line is subjected to expansion and contraction during temperature changes. When stiffer service lines made of galvanized steel pipe were used, lead goosenecks were installed to connect to the water main to reduce breakage from such expansion and contraction.[11]
From the mid-1800s to the early 1900s, many communities started to realize the health risks of lead and began to phase out some lead-containing products.[12] In Australia, the use of lead service lines was restricted in the 1930s, while other countries still continued the practice of using lead service lines decades later. An example is the United States, where lead service lines were allowed until the 1980s.[13] Not only they were allowed, some parts of the United States mandated the use of lead service lines until 1987, primarily due to lobbying by lead manufacturers and plumbing unions.[11][7][12][14] This resulted in as many as 3.3 million lead service lines and 6.4 million lead goosenecks in the country. In England and Wales, there were about 8.9 million homes with lead service lines as of 1997.[15]
In the 2010s, one-third of American communities still had lead service lines, with an estimate of up to six million. Elimination has been extremely difficult due to the high cost of identifying, locating, removing, and preventing the many potential sources of lead in various water distributions systems in the United States.[8]
Health effects
editLead exposure, even at low levels, can cause neurological effects, especially in young children, young women, and developing fetuses. In fetuses, lead in the mother's bones is released along with calcium during fetal bone formation. Lead can also cross the placental barrier into the fetus, which can cause premature birth, growth issues, and death of the fetus. Lead can be passed from the mother through breastfeeding. In children, the effects of lead exposure include learning problems, slow growth, and lower IQ. In adults, low-level exposure can cause hypertension, cognitive issues, and reproductive harm.[16]
Regulations
editThe World Health Organization (WHO) published the first edition of Guidelines for Drinking-water Quality (GDWQ) in 1984 to replace the 1970 European Standards for Drinking-Water and 1971 International Standards for Drinking-Water. The publication recommended the limits of contaminants in drinking water which set the value for lead to not more than 0.05 mg/L based on assumptions about various sources of lead intake and the provisional tolerable weekly intake of 3 mg of lead per adult that was established by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) in 1972. However, no safe levels had been defined.[17] In 1986, JECFA updated the provisional tolerable weekly intake level of lead for infants and children to be based on body weight, at 25 micrograms of lead per kilogram of body weight. JECFA reconfirmed this provisional tolerable value and extended the same value to all age groups in 1993. When WHO published the second edition of GDWQ in 1996, it based it on the new JECFA value assuming 50% of lead exposure from drinking water and a 5-kg infant consuming 0.75 liters of water from bottles per day, and infants are in the most sensitive subgroup. Therefore, WHO established the guideline value of lead concentration in drinking water not to exceed 0.01 mg/L.[18]
Argentina
editAs of early 2020 Argentina has set a standard of 0.05 mg/L based on Resolution no. 523/95-MTSS, which is an amendment of law 19587.[19]
Australia
editIn 2004, Australia lowered the lead exposure limit to 0.01 mg/L from 0.05 through the 2004 Australian Drinking Water Guidelines. However, this is a guideline, not a mandatory standard.[19]
European Union
editOn 3 November 1998, the European Union adopted Directive 98/83/EC to set standards for drinking water. This included a plan to lower the lead contamination in the water distribution systems of member states. The Directive sets the maximum lead concentration in drinking water at 0.025 mg/L by 2003, and 0.01 by 2013.[20]
A study in 1999 gave an estimate of the percentage of lead service lines in some European countries. Ireland, the United Kingdom, France, Portugal, and Belgium all had higher percentages of lead lines ranging between 15% and 51%. Germany, Spain, Italy, Luxembourg, and the Netherlands had between 3% and 9%, while Denmark and Greece had less than 1%.[21]
Approaches to reduce lead exposure in water distribution systems to meet that goal have also differed. For example, the United Kingdom took the short- and medium-term strategy of dosing the water with orthophosphate as a corrosion-control measure and considered lead service line replacement as the long-term strategy. By 2010 (three years before the new lower standard), 95% of public water supplies were treated with orthophosphate. The tests had 99.8% compliance with the 2003 0.025 mg/L standard and 99.0% compliance with the 2013 0.01 mg/L standard. However, many other European countries considered the practice of adding orthophosphate to the water supply to be undesirable, as it would result in sewage with higher concentrations of nutrient. That could potentially create problems of harmful algal blooms.[22] An example of a country that took another approach was Germany. The southern part of Germany had prohibited lead pipes since the early 1900s. However, northern Germany continued to use lead pipes until the 1970s. Germany's approach to meet the new standard was to focus on the removal of lead service lines. Water utilities in northern Germany had already been working on lead service line replacements since the adoption of the Directive in order to meet the 2003 standard.[23]
Canada
editIn 1992, the federal government set the guideline to have the Maximum Allowable Concentration (MAC) of lead in drinking water at 0.01 mg/L. On 8 March 2019, Health Canada updated the guideline to lower the MAC of lead to 0.005 mg/L, one of the lowest values in the world.[4] Regulation of these guidelines is performed at the provincial level, and is inconsistent.[24]
On 4 November 2019, Concordia University published a year-long study which found that one-third of water samples from 11 major Canadian cities tested higher for MAC of lead than the national guideline, with the highest levels recorded from samples in Montreal, Prince Rupert, and Regina.[24] It was also found that some municipalities only had estimates on the number of lead service lines still in use, with no exact data available.[24]
United States
editAs of 2019, federal regulations in the United States specify an "action level" for lead at 0.015 mg/L. A public water system is required to monitor its water supply at customer locations. If more than 10% of tap water samples exceed the lead action level (or the copper action level of 1.3 ppm), the supplier must take additional steps to control corrosion.[25] Other actions may include installation of treatment, checking of source water, removal of lead-containing plumbing, and public education. If corrosion control and monitoring of source water measures fail to keep lead exposure under the action level, water utilities must initiate a lead service line replacement program with at least 7% of total lead service lines identified at the beginning of the program to be replaced annually.[26][27]
Uruguay
editUruguay set the lead exposure of drinking water to 0.05 mg/L in 2000 through Decree 315/94, 2nd edition. It also banned lead water pipes and fittings in 2004. The country set new standards in 2011 through Decree 375/11 to lowered exposure level to 0.03 mg/L and to achieve 0.01 mg/L level by 2021.[19]
Replacements
editResponsibilities
editThere are two parts in a service line. The first part is the pipe that connects the water main to the curb stop which is a stop valve that is located around the street curb or the property line. That first section is called communication pipe. The second part is the pipe that connects the curb stop to the building inlet or a water meter. This part is called supply pipe. Depending on local water utilities, the meter may be located at the property line instead. When the water meter is located at that alternative position, the pipe section that connects the water main to the water meter is the communication pipe, and the section that connects the water meter to the building isolation valve is the supply pipe.[9][28] Lead service lines can exist in one of these scenarios: the communication pipe section can be made of lead, called the lead communication pipe; the supply pipe section can be made of lead, called the lead supply pipe; the entire length can be made out of lead; or only a small section of the communication pipe at the water main is made out of lead (lead gooseneck).[29][30][11]
The ownership structure of service lines varies among water utilities. Depending on localities, the entire length of a service line from the water main to the building inlet may be owned by the water utility, or the property owner. There can also be a partial ownership scenario where the water utility and the property owner share ownership of the service line, thus, replacing the entire lead service line requires a cooperation between the two entities. In the shared ownership, the water utility typically owns the communication pipe and the curb stop, and property owner owns the supply pipe.[31] In this scenario, when the water utility owned section of a lead service line is called public lead service line, and the section owned by the property owner is called private lead service line.[32] When only one part of a lead service line (either public or private) is replaced, it is called partial lead service line replacement. When both sides are replaced at the same time, it is called full lead service line replacement.[9]
Where there is involvement with private ownership, it complicates a full lead service line replacement. A major issue is the cost of the replacement. In the United States, a replacement can cost between $3,000 to $5,000 (2018 estimate) for the private side. This can be a major financial burden for homeowners. Even with incentives such as interest-free loans, or using ratepayer money to cover part of the cost, homeowners are still hesitant.[33] Using ratepayer money to fund private lead service line replacements in itself is a subject of debate. Those who advocate for it argue that the benefits to public health outweigh a small increase in water rates that impacts everyone. On the other side, there is a concern that the increased rates can cause hardship, and there is a public policy question on using ratepayer money to make private property improvements.[34]
Even in the case that private lead service line replacements are fully funded at no cost to property owners, some owners still refuse to allow their water utility to do work on their property for various reasons, such as fearing property damage or not wanting workers inside. For example, in Pittsburgh, 10% of property owners refused no-cost replacement of private lead service lines.[33] This problem is exacerbated in rental properties where tenants have no authority to accept the offer, and landlords do not see the value of the investment.[11] For cities with a large amount of renters, it is difficult to complete a full lead service line replacement program without any forms of mandate through a local ordinance. Alternately, some common law jurisdictions may have enough legal precedent in regard to public nuisance law. Courts may allow municipalities to access private property to address the public health threat without having to obtain permission from the property owner.[35]
Partial replacements
editA partial lead service line replacement involves replacing only one portion of a service line (whether the public or private portion) and leaving the other portion intact. This practice does not completely remove the lead source. Additionally, studies have found that a partial lead service line replacement can cause short-term elevation of lead concentration due to the disturbance during the replacement. An advisory board of the United States Environmental Protection Agency concluded in 2011 that they had enough data to show that such practice could pose a public health risk. An advisory committee of the Centers for Disease Control and Prevention agreed with that position. Therefore, partial lead service line replacement should be avoided.[11] In 2014, the American Water Works Association published a communication guideline with a definition of a partial lead service line replacement to include a repair and a reconnection to a lead service line. It recommended that the entire lead service line should be replaced. It also provided guidance on homeowner notification before partial replacements and water utilities' commitment to follow-up tests.[36] In 2017, a study of the Canadian House of Commons Standing Committee on Transport, Infrastructure and Communities concurred that partial replacements can aggravate the problem of lead exceedances.[37]
Full replacements
editA full lead service line replacement involves replacing the entire service line from the water main to the building inlet. This includes the public and the private portions of the line. A full lead service line replacement should be coordinated with the property owner as it may involve obstacles such as trees, driveways, and walls. Sometime, there is a need to break through the customer's basement wall.[36]
Although a full lead service line replacement is the preferred method, it is not risk-free. There is a short-term elevation of lead concentration, but it tends to release less lead and for a shorter period of time. Research has found that even with a full lead service line replacement, lead exposure can still exist in the home, particularly when the water source is rich in manganese and iron causing scale build-up in the home's pipes. The scale may have absorbed lead from prior to the replacement; when the scale crumbles after the replacement, lead can be carried to the tap in particulate form, which may continue for years. Therefore, flushing of internal plumbing is still required after a full lead service line replacement.[36][38]
Post-replacement flushing procedures
editAfter work done on or near a lead service line, whether a partial or full replacement or other disturbances, such as changing the water meter, the water utility should perform a flushing procedure to remove lead that has been lodged in the building's plumbing. The homeowner should not use any water filter devices, use hot water or ice makers, or consume tap water until the flushing procedure is completed. For the procedure, the water utility performs an initial flush after the work is done. Then the worker starts from the lowest floor and opens all cold-water taps, showers and bathtub faucets throughout the home. Faucet aerators are removed during the procedure. At the top floor where the last tap is open, the worker waits for 30 minutes, then starts turning off the tap and puts the faucet aerators back in place from the top floor on down.[36]
Replacement progress
editLead exposure in drinking water that is caused by lead service lines can be mitigated in the short term by using corrosion control techniques. However, the only long-term solution is to completely replace the lead lines with other materials.[39] Below is a partial list of replacement efforts by water utilities around the world:
Partial list of lead service line replacement efforts
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Mitigation
editWhile full lead service line replacement is the permanent solution, such undertaking takes years or decades. Water utilities and customers need to use other strategies to mitigate the lead exposure risks in the short term.
Internal corrosion control
editVarious techniques can be used by water utilities to control internal corrosion, for example, pH level adjustment, adjustment of carbonate and calcium to create calcium carbonate as a piping surface coating, and applying a corrosion inhibitor. Corrosion inhibitors include phosphate products, such as orthophosphate, used to form films over pipes. This reduces the chance of trace metals including lead leaching from the pipe materials into the water.[56] Another type of corrosion inhibitor includes silicate products. However, the mechanism of film forming and its effectiveness are not well understood.[57]
Flushing
editFor a home with a lead service line, the American Water Works Association recommends homeowners do a morning flush by running the water at the kitchen tap for 3–5 minutes. The amount of required flushing may be longer if the house is far back from the curb, which would have a longer lead service line. In order to conserve water, showering and flushing the toilet can also be used.[36] However, those alternative activities will not flush the line at the kitchen, where it is the main tap for water consumption. An additional flushing at the kitchen tap for 30–45 seconds is recommended.[29]
Filters
editIn certain cases when flushing is not practical, such as having a very long lead service line, using filters may be considered. When choosing filters, water consumers should select the products that remove total lead that includes filtering of dissolved lead and lead particles.[29] In United States, it is recommended that the filters are certified according to American National Standard Institute/National Science Foundation Standard 53.[36]
Widespread hazards and causes
editThere have been a number incidents, with various causes, of widespread lead contamination in drinking water related to lead service lines.
Changing of water source
editIn 2014, the Flint water crisis was caused by changing the water source from the Detroit Water and Sewerage Department's treated water to the Flint River, treated locally in Flint. The treated Flint River water changed the water properties in Flint's distribution system in three areas. First, corrosion inhibitor was not added to the treated water. Secondly, the pH level decreased over time. Thirdly, the chloride level was higher than treated Detroit's water. The combination of these factors contributed to the corrosiveness of the water, causing corrosion to lead and iron pipes.[58] The solution was to change the water source back to Detroit's water supply and replace 30,000 lead service lines.[59]
Changing of disinfection chemical
editIn 2000, lead contamination in Washington, D.C.'s drinking water was caused by changing the water treatment disinfection chemical from chlorine to monochloramine. This was done as a measure to limit disinfection byproducts according to a new regulation from the United States Environmental Protection Agency. The change inadvertently reduced the protective mineral coating properties in the water, causing the scaling – which had been covering the interior surface of the lead service lines for decades – to be reduced to the point that it allowed lead to leach into the water.[60] The solution was to replace all 23,000 lead service lines.[61] However, 15,000 of those were done as partial replacements, which was found to be ineffective.[62]
Changing of corrosion control chemical
editIn 2014, the Pittsburgh water crisis was caused by unauthorized switching of the anti-corrosion agent from soda ash to caustic soda. The city had been using soda ash for decades as a corrosion control chemical. Soda ash's alkalinity helps the metals to be less corrosive. It also leaves a solid residue which encourages mineral buildup as a protective layer within the interior surface of the pipes. Although caustic soda has similar alkalinity, it does not help in buildup creation. After switching the corrosion control chemical, the buildup in the city's distribution system started to disappear, causing leaching in the lead service lines.[63] The short-term solution was to use orthophosphate to create coating. The long-term solution was to do full lead service line replacements. The city started the replacements in 2016. By 2019, 4,200 lead service lines had been replaced. The same year, the city budgeted $49 million to replace another 4,400 public service lines and offer no-cost private line replacements at the same time.[64]
Adjustment of pH levels
editIn 2016, water in Newark, New Jersey, began to have elevated lead levels. A year earlier, the city tried to adjust the pH levels in order to control carcinogens in the system. The result of higher acidity caused the sodium silicate that was used successfully as a corrosion inhibitor for two decades to stop working. It took the city until 2018 to find a short-term solution, switching to using orthophosphate, but it would take another six months to become effective. Water bottles and water filters were distributed as a stop-gap.[65] The long-term solution was for the city to do 18,000 full lead service line replacements. The city took unprecedented steps by borrowing $120 million to shorten the replacement timeframe to three years from ten years, and working with legislators on a law allowing the city to replace the private portion of the lines free of charge and without any permission from property owners.[66]
Physical disturbances
editIn Chicago, after Mayor Rahm Emanuel took office in 2011, he initiated a $481 million water conservation initiative that included household water meter replacements. The work was carried out in a multi-year project. In 2013, a study by the United States Environmental Protection Agency (EPA) concluded that disturbances to lead service lines, including street work or water meter installation, could cause the leaching of lead to be elevated for months or years. During Mayor Emanuel's administration, the city consistently denied any widespread problems of lead in water, and continued the meter installation. In July 2019, Mayor Lori Lightfoot, who took office the same year, announced that the tests had shown elevated levels of lead in more than one in five metered homes, and she ordered the cessation of the meter installation program. The city also faced a lawsuit filed on behalf of the residents to force the city to solve the problem by replacing their lead service lines.[67]
Emanuel also borrowed $412 million from 2011 to 2016 with two-thirds of the money going to replacements of the 440-mile (710 km) water mains; however, the projects did not include lead service line replacements. The workers would reconnect lead service lines to the newly installed water mains. In 2016, the city claimed that there was no evidence of risks associated with that method. The claim contradicted the 2013 EPA report and another finding in 2015 by the City of Milwaukee that prompted Milwaukee to stop installing new water mains.[68] In addition to potential issues with reconnecting lead service lines back to water mains, there were also concerns about how the city repaired damages. During the projects, when the city damaged a lead service line, city workers would cut off the broken part of the lead service line and replace that short section with a copper line. A scientist who tested the water after the repair procedure was done on his home found an extremely high level of lead. However, the city did not perform any tests or notify any homeowners about such repairs, as that type of repair was not considered to be a partial lead service line replacement; therefore, follow-up tests were not required by regulations. An EPA advisory board concluded that the procedure could be more dangerous than a partial lead service line replacement. After 87 months of work, when the city had completed two-thirds of the water main replacement project, the total number of repairs using the procedure was still not available. An incomplete record showed a one-month snapshot to indicate that nine such repairs were done during that month.[69]
Unspecified causes
editIn some cases, high levels of lead in drinking water may have not been caused by a specific incident. The cause may or may not be pinpointed to lead service lines.
In 2015, Irish Water sent out a warning that 126 households in Wexford had an excessive level of lead. It urged residents to stop using their water for drinking unless a five- to ten-minute flush had been performed. The company also recommended owners to replace their lead service lines, which are responsibility of property owners in Ireland.[70] Starting in 2017, more than 30 areas across Ireland have been found to have unsafe levels of lead. Irish Water replaced lead service lines at their own cost as part of their leakage reduction program.[71]
In 2017 a report from the French Agency for Food, Environmental and Occupational Health & Safety (ANSES) indicated that many older properties are at risk of high lead concentration, especially for those located in areas with older water distribution systems. The agency urged property owners to take mitigation efforts, including replacement of water pipes.[72]
See also
editReferences
edit- ^ Assessing the effect of water meter installation on exposure to lead in water (PDF). DEFRA. October 2016. Retrieved 9 October 2019.
- ^ Hayes, Colin R.; Hydes, Owen D. (September 2012). "UK experience in the monitoring and control of lead in drinking water". Journal of Water and Health. 10 (3): 337–348. doi:10.2166/wh.2012.210. PMID 22960478.
- ^ Organization, World Health (2014). Water safety in distribution systems (PDF). ISBN 9789241548892. Retrieved 8 October 2019.
- ^ a b "Fact Sheet on Lead (Pb)" (PDF). Canadian Water and Wastewater Association. Retrieved 12 October 2019.
- ^ Vitruvius Pollio, Marcus (1914). Wikisource. – via
- ^ "Lead Pipes in Homes - Lead Free Faucets and Plumbing - SafePlumbing". www.safeplumbing.org. Retrieved 23 October 2021.
- ^ a b Rabin, Richard (2008). "The Lead Industry and Lead Water Pipes "A Modest Campaign"". American Journal of Public Health. 98 (9): 1584–1592. doi:10.2105/AJPH.2007.113555. PMC 2509614. PMID 18633098.
- ^ a b "Lead in U.S. Drinking Water". SciLine. Retrieved 10 October 2019.
- ^ a b c "Introduction to Lead and Lead Service Line Replacement". Lead Service Line Replacement Collaborative. Retrieved 10 October 2019.
- ^ Counting and Communicating the Number and Location of Lead Service Lines (PDF). Lead Service Line Replacement Collaborative. Retrieved 10 October 2019.
- ^ a b c d e Lead in Minnesota Water: Assessment of Eliminating Lead in Minnesota Drinking Water (PDF). Minnesota Department of Health. February 2019. p. 11. Retrieved 16 October 2019.
- ^ a b "Profiting from poison: how the US lead industry knowingly created a water crisis". the Guardian. 22 September 2022. Retrieved 24 September 2022.
- ^ "Use of Lead Free Pipes, Fittings, Fixtures, Solder, and Flux for Drinking Water". United States Environmental Protection Agency. Retrieved 2 January 2023.
- ^ Bukro, Casey (30 March 1986). "Lead-pipe issue heats up again". Chicago Tribune. Retrieved 10 August 2023.
- ^ Taylor, Mark P.; Harvey, Paul J.; Morrison, Anthony L. (18 June 2018). Lead in Plumbing Products and Materials (PDF). Macquarie University Centre for Energy and Environmental Contaminants. Retrieved 9 October 2019.
- ^ "Lead (Pb) Toxicity: What Are Possible Health Effects from Lead Exposure?". US Centers for Disease Control and Prevention Agency for Toxic Substances and Disease Registry. 25 May 2023. Retrieved 2 January 2024.
- ^ Guidelines for Drinking-Water Quality (PDF) (First ed.). World Health Organization. 1984. pp. 55–56. ISBN 9241541687. Retrieved 13 October 2019.
- ^ Guidelines for drinking-water quality (PDF) (2nd ed.). World Health Organization. 1996. p. 266. ISBN 92-4-154480-5. Retrieved 13 October 2019.
- ^ a b c Lead - Its Effects on Environment and Health: Volume 17 of Metal Ions in Life Sciences. Walter de Gruyter GmbH & Co KG. 2017. pp. 460–462. ISBN 9783110434330. Retrieved 12 October 2019.
- ^ "The Directive overview". European Commission. Retrieved 12 October 2019.
- ^ Hayes, C. R.; Skubala, N. D. (December 2009). "Is there still a problem with lead in drinking water in the European Union?". Journal of Water and Health. 7 (4): 569–580. doi:10.2166/wh.2009.110. PMID 19590124.
- ^ "CIWEM Policy Position Statement: Lead in Drinking Water" (PDF). CIWEM. Retrieved 13 October 2019.
- ^ a b "Germany aims to rid drinking water of lead". Where I come from - Kampaqne (DW) The people who make DW unique Where I come from - DW journalists share their personal stories. Deutsche Welle. 12 March 2013. Retrieved 13 October 2019.
- ^ a b c "'This is not a joke': High levels of lead found in water at Canadian daycares, schools". CTV News. 4 November 2019. Retrieved 5 November 2019.
- ^ "Lead and Copper Rule: Rule Summary". Washington, D.C.: U.S. Environmental Protection Agency (EPA). 15 October 2019.
- ^ Lead and Copper Rule: A Revised Quick Reference Guide (Report). EPA. 2008. EPA 816-F-08-018.
- ^ EPA. "Lead service line replacement requirements." Code of Federal Regulations, 40 CFR 141.84.
- ^ Contribution of service line and plumbing fixtures to lead and copper rule compliance issues (PDF). Awwa Research Foundation. 2008. ISBN 978-1-60573-031-7. Retrieved 20 October 2019.
{{cite book}}
: CS1 maint: ignored ISBN errors (link) - ^ a b c "Advice to Chicago Residents About Lead in Drinking Water". United States Environmental Protection Agency. 28 October 2015. Retrieved 16 October 2019.
- ^ "Southend East - Lead Pipe Replacement Scheme". Essex and Suffolk Water Group. Retrieved 20 October 2019.
- ^ Strategies to Obtain Customer Acceptance of Complete Lead Service Line Replacement (PDF). American Water Works Association. 2005. Retrieved 20 October 2019.
- ^ "Potential for Lead Introduced into Water Supply". City of Wheaton, Illinois. 9 February 2017. Retrieved 20 October 2019.
- ^ a b Beitsch, Rebecca (27 August 2018). "US cities push to remove lead pipes, but some property owners resist". The Christian Science Monitor. Retrieved 20 October 2019.
- ^ a b Flangan, Brenda (11 October 2019). "Murphy's Target: Replace All Lead Service Lines in NJ by 2029". NJTV News. Retrieved 20 October 2019.
- ^ Barchenger, Stacey and; Racioppi, Dustin (30 October 2019). "Lead in NJ water: The murky problem between property rights and replacing pipes". Trenton Bureau. Retrieved 2 November 2019.
- ^ a b c d e f Communicating About Lead Service Lines: A Guide for Water Systems Addressing Service Line Repair and Replacement (PDF). American Water Works Association. 2014. Retrieved 9 October 2019.
- ^ Lead in Drinking Water (PDF). Standing Committee on Transport, Infrastructure and Communities, Parliament of Canada. 5 December 2017. p. 2. Retrieved 20 October 2019.
- ^ "Revealing the Complicated Nature of Tap Water Lead Contamination: A Madison, Wisconsin, Case Study". United States Environmental Protection Agency. 30 July 2018. Retrieved 16 October 2019.
- ^ a b c d e f "Recognizing efforts to replace lead service lines". Environmental Defense Fund. Retrieved 18 October 2019.
- ^ Johnston, Jules (10 April 2019). "Brussels tap water still has too much lead". The Brussels Times. Retrieved 17 October 2019.
- ^ 2018 Envirovista Report (PDF). EPCOR. 26 June 2019. p. 28. Retrieved 26 October 2019.
- ^ Decision 2017 NSUARB 138 M07891 (PDF). Nova Scotia Utility and Review Board. 22 August 2017. pp. 14–17. Retrieved 26 October 2019.
- ^ Shingler, Benjamin (2 August 2016). "Montreal's plan to replace lead pipes, explained". CBC News. Retrieved 17 October 2019.
- ^ Annual Report – Lead in Drinking Water Mitigation Strategy (PDF). City of Toronto. June 2019. Retrieved 17 October 2019.
- ^ Private operators delivering performance for water-users and public authorities: Examples from across the world (PDF) (2nd ed.). AquaFed. March 2015. p. 56. Retrieved 18 October 2019.
- ^ Power, Jack (16 April 2019). "Concern over low uptake of grant for lead pipe replacement". The Irish Times. Retrieved 17 October 2019.
- ^ Struker, André; Vreeburg, Jan; van der Hoek, Jan Peter (February 2016). Water production and distribution in The Netherlands (PDF). Waternet. p. 25. Retrieved 18 October 2019.
- ^ Annual Information Return 2018 for Public Domain (PDF). Northern Ireland Water. July 2018. Retrieved 19 October 2019.
- ^ Ahmad, Zahra (11 April 2019). "Roughly 2,500 lead service lines left to replace in Flint". MLive. Retrieved 17 October 2019.
- ^ "Overview of Framingham's Lead Service Line Replacement Program" (PDF). Town of Framingham. Retrieved 18 October 2019.
- ^ "Lead Questions & Answers". Medford Water Commission. Retrieved 18 October 2019.
- ^ Rahman, Rema (8 October 2019). "City Inspects Additional Homes for Lead Service Lines at Homeowners Request". TAPinto Newark. Retrieved 17 October 2019.
- ^ "Lead Service Line Replacement Program". City of Newark. Retrieved 17 October 2019.
- ^ "DC WASA Hosts Public Education Sessions During Review of Lead Water Pipe Removal Program". DC Water. 25 January 2019. Retrieved 17 October 2019.
- ^ DC Water's Procedures for Monitoring Lead in Drinking Water Could Be Improved (OIG No. 18-1-04LA) (PDF). District of Columbia Office of the Inspector General. April 2019. pp. 10–12. Retrieved 17 October 2019.
- ^ The Use of Phosphates in Water Treatment for Corrosion Control & Sequestration (PDF). Carus Corporation. 13 April 2017. Retrieved 8 October 2019.
- ^ Thompson, Judy LaRosa; Scheetz, Barry E.; Schock, Michael R.; Lytle, Darren A.; Delaney, Patrick J. (November 1997). "Sodium Silicate Corrosion Inhibitors: Issues of Effectiveness and Mechanism" (PDF). Proceedings of 1997 AWWA Water Quality Technology Conference. Retrieved 10 October 2019.
- ^ Torrice, Michael (11 February 2016). "How Lead Ended Up In Flint's Tap Water". Chemical and Engineering News. Retrieved 5 May 2021.
- ^ Sanburn, Josh (18 January 2017). "Flint's Water Crisis Still Isn't Over. Here's Where Things Stand a Year Later". TIME. Retrieved 9 October 2019.
- ^ Augenstein, Neal (4 April 2016). "Before Flint: D.C.'s drinking water crisis was even worse". WTOP. Retrieved 4 May 2021.
- ^ Nakamura, David (13 November 2004). "WASA to Replace 2,800 Lead Pipes Over Next Year". Washington Post. Retrieved 9 October 2019.
- ^ McCartney, Robert (4 December 2010). "Drinking water debacle deals a blow to CDC and EPA". Washington Post. Retrieved 9 October 2019.
- ^ Frazier, Reid (24 March 2017). "As in Flint, Cost-Cutting May Be to Blame for Pittsburgh's High Lead Levels". The Allegheny Front. Retrieved 10 October 2019.
- ^ Davidson, Tom (26 July 2019). "Pittsburgh lead levels in water drop as PWSA claims orthophosphate working". Trib Live. Retrieved 9 October 2019.
- ^ Corasaniti, Nick; Kilgannon, Corey; Schwartz, John (24 August 2019). "Tainted Water, Ignored Warnings and a Boss With a Criminal Past How a long line of questionable decisions led to the crisis over lead contamination in Newark". New York Times. Retrieved 9 October 2019.
- ^ Corasaniti, Nick (26 August 2019). "Newark Water Crisis: Racing to Replace Lead Pipes in Under 3 Years Image". New York Times. Retrieved 9 October 2019.
- ^ Hawthorne, Michael (9 July 2019). "Lightfoot pauses water meter installations after city finds spikes of brain-damaging lead in homes". Chicago Tribune. Retrieved 10 October 2019.
- ^ Hawthorne, Michael; Matusak, Peter (21 September 2016). "As other cities dig up pipes made of toxic lead, Chicago resists". Chicago Tribune. Retrieved 10 October 2019.
- ^ Eng, Monica (25 March 2019). "This Procedure Can Spike Lead Levels In Your Water — But You Probably Wouldn't Know About It". WBEZ News. Retrieved 10 October 2019.
- ^ Tucker, David (20 January 2015). "Wexford estate warned about lead in the tap water". Wexford People. Retrieved 11 December 2020.
- ^ Power, Jack (15 April 2019). "Unsafe levels of lead found in drinking water across country". The Irish Times. Retrieved 11 December 2020.
- ^ "French tap water still 'has too much lead', says study". The Connexion. 24 November 2017. Retrieved 11 December 2020.