This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. (October 2009) |
The photosphere denotes those solar or stellar surface layers from which optical radiation escapes. These stellar outer layers can be modeled by different computer programs. Often, calculated models are used, together with other programs, to calculate synthetic spectra for stars. For example, in varying the assumed abundance of a chemical element, and comparing the synthetic spectra to observed ones, the abundance of that element in that particular star can be determined. As computers have evolved, the complexity of the models has deepened, becoming more realistic in including more physical data and excluding more of the simplifying assumptions. This evolution of the models has also made them applicable to different kinds of stars.
![](http://178.128.105.246/cars-http-upload.wikimedia.org/wikipedia/en/thumb/d/d1/Model_atmospheres_Bengt_Gustafsson.jpg/220px-Model_atmospheres_Bengt_Gustafsson.jpg)
Common assumptions and computational methods
editThis assumption (LTE) means that within any local computational volume, the state of thermodynamical equilibrium is assumed:
- The inflow of radiation is determined by a blackbody spectrum set by the local temperature only. This radiation then interacts with the matter inside the volume.
- The number of atoms or molecules occupying different excited energy states is determined by the Maxwell–Boltzmann distribution. This distribution is determined by the atomic excitation energies, and the local temperature.
- The number of atoms in different ionization states is determined by the Saha equation. This distribution is determined by the atomic ionization energy, and the local temperature.
Plane parallel and spherical atmospheres
editA common simplifying assumption is that the atmosphere is plane parallel, meaning that physical variables depend on one space coordinate only: the vertical depth (i.e., one assumes that we see the stellar atmosphere "head-on", ignoring the curved portions towards the limbs). In stars where the photosphere is relatively thick compared to the stellar diameter, this is not a good approximation and an assumption of a spherical atmosphere is more appropriate.
Expanding atmospheres
editMany stars lose mass in the form of a stellar wind. Especially for stars which are very hot (photospheric temperatures > 10,000 Kelvin) and very luminous, these winds can be so dense that major parts of the emergent spectrum are formed in an "expanding atmosphere", i.e. in layers that are moving outward with a high speed that can reach a few 1000 km/s.
This means that the star is currently not undergoing any radical changes in structure involving large scale pulsations, flows or mass loss.
This assumption means that the convective motions in the atmosphere are described by the mixing-length theory, modeled as parcels of gas rising and disintegrating. To account for some of the small-scale effects in convective motions, a parameter called microturbulence is often used. The microturbulence corresponds to the motions of atoms or molecules on scales smaller than the photon mean free path.
Different methods of treating opacity
editTo fully model the photosphere one would need to include every absorption line of every element present. This is not feasible because it would be computationally extremely demanding, and also all spectra are not fully known. Therefore, one needs to simplify the treatment of opacity. Methods used in photospheric models include:
- Opacity sampling (OS)
Opacity sampling means that the radiative transfer is evaluated for a number of optical wavelengths spread across the interesting parts of the spectrum. Although the model would improve with more frequencies included, opacity sampling uses as few as practical, to still get a realistic model, thereby minimizing calculation time.
- Opacity distribution functions (ODF)
In using opacity distribution functions, the spectra are divided into subsections, within which the absorption probabilities are rearranged and simplified to one smooth function. Similar to the opacity sampling method, this is improved by adding more intervals but at the cost of prolonging the computation time.
Different models
editThere are several different computer codes available modeling stellar photospheres. Some of them are described here and some of them are linked under "External links" below.
ATLAS
editThe ATLAS code was originally presented in 1970 by Robert Kurucz using the assumption of LTE and hydrostatic and plane parallel atmospheres. Since the source code is publicly available on the web, it has been amended by different persons numerous times over the years and nowadays exists in many versions. There are both plane parallel and spherical versions as well as those using opacity sampling or opacity distribution functions.
MARCS
editThe MARCS (Model Atmospheres in Radiative and Convective Scheme) code was originally presented in 1975 by Bengt Gustafsson, Roger Bell and others. The original code simulated stellar spectra assuming the atmosphere to be in hydrostatic equilibrium, plane parallel, with convection described by mixing-length theory. The evolution of the code has since involved better modeling of the line opacity (opacity sampling instead of opacity distribution functions), spherical modeling and including an increasing number of physical data. Nowadays a large grid of different models is available on the web.
PHOENIX
editThe PHOENIX code is "risen from the ashes" of an earlier code called SNIRIS and mainly developed by Peter Hauschildt (Hamburger Sternwarte) from 1992 onwards; it is regularly updated and made available on the web. It runs in two different spatial configuration modes: the "classic" one-dimensional mode, assuming spherical symmetry, and the three-dimensional mode. It allows for calculations for many different astrophysical objects, i.e. supernovae, novae, stars and planets. It considers scattering and dust and allows for non-LTE computations over many atomic species, plus LTE over atoms and molecules.
PoWR
editThe PoWR (Potsdam Wolf-Rayet) code is designed for expanding stellar atmospheres, i.e. for stars with a stellar wind. It has been developed since the 1990s by Wolf-Rainer Hamann and collaborators at the Universität Potsdam (Germany) especially for simulating Wolf-Rayet stars, which are hot stars with very strong mass loss. Adopting spherical symmetry and stationarity, the program computes the occupation numbers of the atomic energy states, including the ionization balance, in non-LTE, and consistently solves the radiative transfer problem in the comoving frame. The stellar wind parameters (mass-loss rate, wind speed) can be specified as free parameter, or, alternatively, calculated from the hydrodynamic equation consistently. As the PoWR code treats consistently the static and expanding layers of the stellar atmosphere, it is applicable for any types of hot stars. The code as such is not yet public, but large sets of models for Wolf-Rayet stars are available on the web.
3D hydrodynamical models
editThere are efforts to construct models not assuming LTE, and/or computing the detailed hydrodynamic motions instead of hydrostatic assumptions. These models are physically more realistic but also require more physical data such as cross sections and probabilities for different atomic processes. Such models are computationally rather demanding, and have not yet reached a stage of broader distribution.
Applications of Model Photospheres
editModel Atmospheres, while interesting in their own right, are frequently used as part of input recipes and tools for studying other astrophysical problems.
Stellar Evolution
editAs a result of stellar evolution, changes in the internal structure of stars manifest themselves in the photosphere.
Synthetic Spectra
editSpectral synthesis programs (e.g. Moog (code)) often use previously generated model photospheres to describe the physical conditions (temperature, pressure, etc...) through which photons must travel to escape the stellar atmosphere. Together with a list of absorption lines and an elemental abundance table, spectral synthesis programs generate synthetic spectra. By comparing these synthetic spectra to observed spectra of distant stars, astronomers can determine the properties (temperature, age, chemical composition, etc...) of these stars.
See also
editReferences
edit- Gray, 2005, The observation and analysis of stellar photospheres, Cambridge University Press
- Gustafsson et al., 1975, A grid of Model Atmospheres for Metal-deficient Giant Stars I, Astronomy and Astrophysics 42, 407-432
- Gustafsson et al., 2008, A grid of MARCS model atmospheres for late-type stars, Astronomy and Astrophysics 486, 951-970
- Mihalas, 1978, Stellar atmospheres, W.H. Freeman & Co.
- Plez, 2008, MARCS model atmospheres, Physica Scripta T133, 014003
- Rutten, Radiative transfer in stellar atmospheres
- Tatum, Stellar atmospheres
External links
edit- The Kurucz 1993 models
- Robert L. Kurucz
- The MARCS model
- Spectral Models Stars P.Coelho
- The MULTI model
- The Pandora model
- The PHOENIX model
- The Tlusty model
- The PoWR models for Wolf-Rayet stars
- A package of stellar atmospheres software
- Collaborative computational project (CCP7)
- The Cloudy model (models the light from dilute gas clouds rather than stars)
- A list of syntethic spectra on the web
- SPECTRUM - a stellar spectral synthesis program
- MOOG - a different spectral synthesis program