Sequential quadratic programming

Sequential quadratic programming (SQP) is an iterative method for constrained nonlinear optimization which may be considered a quasi-Newton method. SQP methods are used on mathematical problems for which the objective function and the constraints are twice continuously differentiable, but not necessarily convex.

SQP methods solve a sequence of optimization subproblems, each of which optimizes a quadratic model of the objective subject to a linearization of the constraints. If the problem is unconstrained, then the method reduces to Newton's method for finding a point where the gradient of the objective vanishes. If the problem has only equality constraints, then the method is equivalent to applying Newton's method to the first-order optimality conditions, or Karush–Kuhn–Tucker conditions, of the problem.

Algorithm basics

edit
 
Overview schematic illustrating the basic SQP algorithm

Consider a nonlinear programming problem of the form:

 

The Lagrangian for this problem is[1]

 

where   and   are Lagrange multipliers.

The standard Newton's Method searches for the solution   by iterating the following equation, where   denotes the Hessian matrix:

 .

However, because the matrix   is generally singular (and therefore non-invertible), the Newton step   cannot be calculated directly. Instead the basic sequential quadratic programming algorithm defines an appropriate search direction   at an iterate  , as a solution to the quadratic programming subproblem

 

where the quadratic form is formed with the Hessian of the Lagrangian. Note that the term   in the expression above may be left out for the minimization problem, since it is constant under the   operator.

Together, the SQP algorithm starts by first choosing the initial iterate  , then calculating   and  . Then the QP subproblem is built and solved to find the Newton step direction   which is used to update the parent problem iterate using  . This process is repeated for   until the parent problem satisfies a convergence test.

Practical implementations

edit

Practical implementations of the SQP algorithm are significantly more complex than its basic version above. To adapt SQP for real-world applications, the following challenges must be addressed:

  • The possibility of an infeasible QP subproblem.
  • QP subproblem yielding a bad step: one that either fails to reduce the target or increases constraints violation.
  • Breakdown of iterations due to significant deviation of the target/constraints from their quadratic/linear models.

To overcome these challenges, various strategies are typically employed:

  • Use of merit functions, which assess progress towards a constrained solution, or filter methods.
  • Trust region or line search methods to manage deviations between the quadratic model and the actual target.
  • Special feasibility restoration phases to handle infeasible subproblems, or the use of L1-penalized subproblems to gradually decrease infeasibility

These strategies can be combined in numerous ways, resulting in a diverse range of SQP methods.

Alternative approaches

edit

Implementations

edit

SQP methods have been implemented in well known numerical environments such as MATLAB and GNU Octave. There also exist numerous software libraries, including open source:

  • SciPy (de facto standard for scientific Python) has scipy.optimize.minimize(method='SLSQP') solver.
  • NLopt (C/C++ implementation, with numerous interfaces including Julia, Python, R, MATLAB/Octave), implemented by Dieter Kraft as part of a package for optimal control, and modified by S. G. Johnson.[2][3]
  • ALGLIB SQP solver (C++, C#, Java, Python API)

and commercial

See also

edit

Notes

edit
  1. ^ Jorge Nocedal and Stephen J. Wright (2006). Numerical Optimization. Springer. ISBN 978-0-387-30303-1.
  2. ^ Kraft, Dieter (Sep 1994). "Algorithm 733: TOMP–Fortran modules for optimal control calculations". ACM Transactions on Mathematical Software. 20 (3): 262–281. CiteSeerX 10.1.1.512.2567. doi:10.1145/192115.192124. S2CID 16077051. Retrieved 1 February 2019.
  3. ^ "NLopt Algorithms: SLSQP". Read the Docs. July 1988. Retrieved 1 February 2019.
  4. ^ KNITRO User Guide: Algorithms

References

edit
edit