Check Point VPN-1

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) A major contributor to this article appears to have a close connection with its subject. It may require cleanup to comply with Wikipedia's content policies, particularly neutral point of view. Please discuss further on the talk page. (October 2016) (Learn how and when to remove this message) This article may rely excessively on sources too closely associated with the subject, potentially preventing the article from being verifiable and neutral. Please help improve it by replacing them with more appropriate citations to reliable, independent, third-party sources. (October 2016) (Learn how and when to remove this message) This article relies excessively on references to primary sources. Please improve this article by adding secondary or tertiary sources. Find sources: "Check Point VPN-1" – news · newspapers · books · scholar · JSTOR (October 2016) (Learn how and when to remove this message) The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources: "Check Point VPN-1" – news · newspapers · books · scholar · JSTOR (January 2018) (Learn how and when to remove this message) (Learn how and when to remove this message)

VPN-1 is a firewall and VPN product developed by Check Point Software Technologies Ltd.

VPN-1 is a stateful firewall which also filters traffic by inspecting the application layer. It was the first commercially available software firewall to use stateful inspection. VPN-1 functionality is currently bundled within all the Check Point's perimeter security products. The product, previously known as FireWall-1, is now sold as an integrated firewall and VPN solution.

The VPN-1 software is installed on a separate operating system, which provides the protocol stack, file system, process scheduling and other features needed by the product. This is different from most other commercial firewall products like Cisco PIX and Juniper firewalls where the firewall software is part of a proprietary operating system.

Although traditionally sold as software only, VPN-1 is also sold in appliance form as Check Point's UTM-1 (starting 2006) and Power-1 appliances. Appliances run the Gaia, or Gaia Embedded operating system.

As of version R80, Check Point Quantum Network Security supports the following operating systems:

• Check Point Gaia Embedded (an ARM based distribution for SMB appliances);
• Check Point Gaia (a Check Point Linux distribution, based on Red Hat Enterprise Linux, unifying IPSO and SecurePlatform into a single operating system);

Previous versions of Check Point firewall supported other operating systems including Sun Solaris, HP-UX and IBM AIX, and Microsoft Windows. See the table in the Version History section below for details.

VPN-1 running on the Nokia platform on IPSO was often called a Nokia Firewall as if it were a different product, but in fact it runs the same VPN-1 software as other platforms.

Upon completing the acquisition of Nokia Security Appliance Business in 2009, Checkpoint started the project named Gaia aimed at merging two different operating systems—SecurePlatform and IPSO—into one. This new OS is positioned to finally replace both existing operating systems at some point in the future.^[1] On April 17, 2012 Check Point announced the general availability of the Gaia operating system as part of the R75.40 release.

• Check Point
• Check Point Abra

• www.checkpoint.com — Check Point Software Technologies web site
• www.fw-1.de — information about VPN-1
• Check Point Official Forums
• CPUG: The Check Point User Group
• Check Point IPsec IKE Implementation details