Jump to content

GS&WR 0-6-4T

From Wikipedia, the free encyclopedia
(Redirected from GS&WR Class 203)

Great Southern & Western Railway
0-6-4T
Type and origin
Power typeSteam
DesignerAlexander McDonnell
BuilderInchicore Works
Build date1876[1]–1880
Total produced6
Specifications
Configuration:
 • Whyte0-6-4T
Gauge5 ft 3 in (1,600 mm)
Driver dia.4 ft 6+12 in (1.384 m)
Axle load12 long tons 13 cwt (28,300 lb or 12.9 t)
Loco weight51 long tons 6 cwt (114,900 lb or 52.1 t)
Fuel typeCoal
Fuel capacity2 long tons 10 cwt (5,600 lb or 2.5 t)
Water cap.2,540 imp gal (11,500 L; 3,050 US gal)
Boiler pressure150 psi (1.03 MPa)
Heating surface:
 • Firebox103.5 sq ft (9.62 m2)
 • Tubes900 sq ft (84 m2)
CylindersTwo, inside
Cylinder size18 in × 24 in (457 mm × 610 mm)
Performance figures
Tractive effort18,200 lbf (80.96 kN)
Career
OperatorsGS&WRGSR
Class203
Numbers201–202, 203–206
Withdrawn1928, 1940
DispositionAll scrapped
Details refer to No. 203 as built.[1]

The (GS&WR) 0-6-4T were a set of 6 locomotives of two variants of the 0-6-4T arrangement designed by Alexander McDonnell.[1] When introduced in 1876 it was the first use of a 0-6-4 configuration in the British Isles.[2] The final four locomotives were to be designated GS&WR Class 203.

Design

[edit]

The design utilised many existing components of the existing 0-6-0T and 0-4-4T designs. 18x24in cylinders were already being retrofitted to existing goods engines to cope with existing traffic needs.[2] The first two locomotives, Nos. 201 and 202, were built as back tanks holding water above the rear bogie and were particularly noted for adhesion problems with little weight on the front driving wheels. The subsequent batch of four in 1880 were built with side tanks and being four tons heavier gave some improvement in adhesion.[3]

Service

[edit]

Experience with the 0-6-4T tanks was unusually disappointing for a McDonnel design. Experience at Cork has shown they were extremely prone to slipping while the long frames and wheelbase were problematic in the tight curves of marshalling sidings; with the powerful thrust of the large cylinders not being able to be utillised.[2] Ivatt and Aspinall were to address these issues in a 0-6-0T design that was to become known as the GS&WR Class 201.[2]

Withdrawals

[edit]

The first two, Nos. 201 and 202, were withdrawn relatively early and their numbers reallocated to a pair of members of GS&WR Class 201 built in 1895 some eight years after the first four.[1][a] No. 204 was rebuilt as a 0-6-0T in 1914. No. 205 and 206 were withdrawn in 1928 with No 203 lasting until 1940.[1]

Notes and references

[edit]

Notes

[edit]
  1. ^ On withdrawal in 1895 these locomotives saw departmental use having names in place of their numbers

References

[edit]
  1. ^ a b c d e Clements, Jeremy & McMahon, Michael (2008). Locomotives of the GSR. Newtownards: Colourpoint Books. pp. 84–87. ISBN 978-1-906578-26-8.
  2. ^ a b c d Bulleid, H.A.V. (1967). The Aspinall Era. Ian Allan Publishing. p. 34−35,40,73.
  3. ^ Murray, K. A.; McNeil, D.B. (1976). The Great Southern & Western Railway. Irish Record Railway Society. p. 193. ISBN 0904078051.