Copper chromite
Identifiers | |
---|---|
3D model (JSmol)
|
|
ECHA InfoCard | 100.031.806 |
EC Number |
|
PubChem CID
|
|
UNII | |
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
Cu2Cr2O5 | |
Molar mass | 311.0812 g/mol |
Appearance | grey powder |
Density | 5.42 g/cm3[1] |
Hazards | |
NIOSH (US health exposure limits): | |
PEL (Permissible)
|
TWA 1 mg/m3 (as Cu)[2] |
REL (Recommended)
|
TWA 1 mg/m3 (as Cu)[2] |
IDLH (Immediate danger)
|
TWA 100 mg/m3 (as Cu)[2] |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Copper chromite often refers to inorganic compounds with the formula Cu2Cr2Ox. They are black solids. Cu2Cr2O4 is a well-defined material. The other copper chromite often is described as Cu2Cr2O5. It is used to catalyze reactions in organic chemistry.[3]
History
[edit]Copper chromite was first described in 1908.[4] The catalyst was further developed by Homer Burton Adkins and Wilbur Arthur Lazier, partly based on interrogation of German chemists after World War II in relation to the Fischer–Tropsch process.[5][6] For this reason it is sometimes referred to as the Adkins catalyst or the Lazier catalyst. Adkins was the first to incorporate barium into the structure, which prevents the catalyst from being reduced to an inactive form during hydrogenation reactions.[7]
Chemical structures
[edit]The stoichiometry of the Laziar or Adkins catalyst is not well defined, thus the structure of their material is not defined either.[8]
The oxidation states for the constituent metals in Cu2Cr2O4 are Cu(II) and Cr(III).[9] A variety of compositions are recognized for the substance, including Cu2CrO4·CuO·BaCrO4 (CAS# 99328-50-4), Cu2Cr2O5 (CAS# 12053-18-8), and Cr2CuO4.[10] Commercial samples often contain barium oxide and other components.
Production
[edit]Copper chromites catalyst are produced by thermal decomposition of diverse precursors. The traditional method is by the calcining of copper chromate:[11]
- 2 CuCrO4 → 2 CuCrO3 + O2
Copper barium ammonium chromate is the most commonly used substance for production of copper chromite. The resulting copper chromite mixture produced by this method can only be used in procedures that contain materials inert to barium, as barium is a product of the decomposition of copper barium ammonium chromate, and is thus present in the resulting mixture. The by-product copper oxide is removed using an acetic acid extraction, consisting of washing with the acid, decantation and then heat drying of the remaining solid to yield isolated copper chromite. Copper chromite is produced by the exposure of copper barium ammonium chromate to temperatures of 350-450 °C, generally by a muffle furnace:[5]
- Ba
2Cu
2(NH
4)
2(CrO
4)
5 → CrCuO
3 + CuO + 2 Ba + 4 H
2O + 4 Cr + N
2 + 6 O
2
Copper ammonium chromate is also used for production of copper chromite. It is generally utilized as an alternative to the route of barium ammonium chromate for usage in chemicals reactive with barium. This can also be washed with acetic acid and dried to remove impurities. Copper chromite is produced through the exposure of copper ammonium chromate to temperatures of 350-450 °C:
- Cu(NH
4)
2(CrO
4)
2 → CrCuO
3 + CrO + 4 H
2O + N
2
An active copper chromite catalyst which includes barium in its structure can be prepared from a solution containing barium nitrate, copper(II) nitrate, and ammonium chromate. When these compounds are mixed a resulting precipitate is formed. This solid product is then calcined at 350–400 °C to yield the catalyst:[11]
- Cu(NO3)2 + Ba(NO3)2 + (NH4)2CrO4 → CuCr2O4·BaCr2O4
Illustrative reactions
[edit]![](http://178.128.105.246/content-http-upload.wikimedia.org/wikipedia/commons/thumb/3/35/Me2sabacateTocycloC10diol.svg/244px-Me2sabacateTocycloC10diol.svg.png)
- Hydrogenolysis of ester compounds to the corresponding alcohols. This approach is useful for conversion of fatty acid esters, such as fatty acid methyl esters (FAMEs) to fatty alcohols:
- RCO2CH3 + 2 H2 → RCH2OH + HOCH3
In some cases, alkene groups are hydrogenated.
- Diethyl maleate can similarly be hydrogenated to either butyrolactone or 1,4-butanediol, depending on conditions.[10]
- Sebacoin, derived from the acyloin condensation of dimethyl sebacate, is hydrogenated to 1,2-cyclodecanediol in the presence of this catalyst.[12]
- Phenanthrene is reduced at the 9,10 position.
- Hydrogenolysis of tetrahydrofurfuryl alcohol to 1,5-pentanediol at 250–300 °C under 3300-6000 psi of H2.[13]
- Decarboxylation of α-phenylcinnamic acid to cis-stilbene.[14]
Reactions involving hydrogen are conducted at relatively high gas pressure (135 atm) and high temperatures (150–300 °C) in a so-called hydrogenation bomb. More active catalysts, such as W-6 grade Raney nickel, also catalyze hydrogenations such as ester reductions. The latter catalyst benefits from requiring less vigorous conditions (i.e., it works at room temperature under similar hydrogenation pressures) but requires a higher ratio of catalyst to reagents.[12]
See also
[edit]References
[edit]- ^ Dollase, W. A.; O'Neill, H. St. C. (1997). "The Spinels CuCr2O4and CuRh2O4". Acta Crystallographica Section C Crystal Structure Communications. 53 (6): 657–659. Bibcode:1997AcCrC..53..657D. doi:10.1107/S0108270197000486.
- ^ a b c NIOSH Pocket Guide to Chemical Hazards. "#0150". National Institute for Occupational Safety and Health (NIOSH).
- ^ Cladingboel, D. E. "Copper Chromite" in Encyclopedia of Reagents for Organic Synthesis 2001 John Wiley & Sons. doi:10.1002/047084289X.rc221
- ^ Gröger, Max (1912). "Chromite aus basischen Chromaten". Zeitschrift für Anorganische Chemie. 76: 30–38. doi:10.1002/zaac.19120760103.
- ^ a b Adkins, Homer; Burgoyne, Edward; Schneider, Henry (1950). "The Copper—Chromium Oxide Catalyst for Hydrogenation". Journal of the American Chemical Society. 72 (6): 2626–2629. doi:10.1021/ja01162a079.
- ^ Fischer–Tropsch Archive
- ^ Connor, Ralph.; Folkers, Karl.; Adkins, Homer. (May 1931). "THE PREPARATION OF COPPER-CHROMIUM OXIDE CATALYSTS FOR HYDROGENATION". Journal of the American Chemical Society. 53 (5): 2012–2012. doi:10.1021/ja01356a511.
- ^ Capece, F.M.; Castro, V.Di; Furlani, C.; Mattogno, G.; Fragale, C.; Gargano, M.; Rossi, M. (1982). ""Copper chromite" Catalysts: XPS structure elucidation and correlation with catalytic activity". Journal of Electron Spectroscopy and Related Phenomena. 27 (2): 119–128. Bibcode:1982JESRP..27..119C. doi:10.1016/0368-2048(82)85058-5.
- ^ Prince, E. (1957). "Crystal and Magnetic Structure of Copper Chromite". Acta Crystallographica. 10 (9): 554–556. Bibcode:1957AcCry..10..554P. doi:10.1107/S0365110X5700198X.
- ^ a b Rylander, Paul N. (2000). "Hydrogenation and Dehydrogenation". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a13_487. ISBN 3-527-30673-0.
- ^ a b Lazier, W. A.; Arnold, H. R. (1939). "Copper Chromite Catalyst". Organic Syntheses. 19: 31. doi:10.15227/orgsyn.019.0031.
- ^ a b Blomquist, A. T.; Goldstein, Albert (1956). "1,2-Cyclodecanediol". Organic Syntheses. 36: 12. doi:10.15227/orgsyn.036.0012.
- ^ Kaufman, Daniel; Reeve, Wilkins (1946). "1,5-Pentanediol". Organic Syntheses. 26 (83). doi:10.15227/orgsyn.026.0083.
- ^ Buckles, Robert; Wheeler, Norris (1953). "cis -Stilbene". Organic Syntheses. 33: 88. doi:10.15227/orgsyn.033.0088.
External links
[edit]- CAS registry [7440-47-3] & [1317-38-0]