Jump to content

TEM-function

From Wikipedia, the free encyclopedia

In petroleum engineering, TEM (true effective mobility), also called TEM-function is a criterion to characterize dynamic two-phase flow characteristics of rocks (or dynamic rock quality).[1][2][3][4][5][6][7][8][9][10] TEM is a function of relative permeability, porosity, absolute permeability and fluid viscosity, and can be determined for each fluid phase separately. TEM-function has been derived from Darcy's law for multiphase flow.[1]

in which is the absolute permeability, is the relative permeability, φ is the porosity, and μ is the fluid viscosity. Rocks with better fluid dynamics (i.e., experiencing a lower pressure drop in conducting a fluid phase) have higher TEM versus saturation curves. Rocks with lower TEM versus saturation curves resemble low quality systems.[1]

TEM-function in analyzing relative permeability data is analogous with Leverett J-function in analyzing capillary pressure data. Furthermore, TEM-function in two-phase flow systems is an extension of RQI (rock quality index) for single-phase systems.[1]

Also, TEM-function can be used for averaging relative permeability curves (for each fluid phase separately, i.e., water, oil, gas, CO2).[1]

See also

[edit]

References

[edit]
  1. ^ a b c d e Mirzaei-Paiaman, A.; Saboorian-Jooybari, H.; Chen, Z.; Ostadhassan, M. (2019). "New technique of True Effective Mobility (TEM-Function) in dynamic rock typing: Reduction of uncertainties in relative permeability data for reservoir simulation". Petroleum Research. 179: 210–227. doi:10.1016/j.petrol.2019.04.044. S2CID 149962022.
  2. ^ Mirzaei-Paiaman, A.; Asadolahpour, S.R.; Saboorian-Jooybari, H.; Chen, Z.; Ostadhassan, M. (2020). "A new framework for selection of representative samples for special core analysis". Petroleum Research. 5 (3): 210–226. doi:10.1016/j.ptlrs.2020.06.003.
  3. ^ Mirzaei-Paiaman, A. (2019). "New Concept of Dynamic Rock Typing and Necessity of Modifying Current Reservoir Simulators" (PDF). SPE Review London: 7–10. Retrieved 6 August 2020.
  4. ^ Faramarzi-Palangar, M. (2020). "Investigating dynamic rock quality in two-phase flow systems using TEM-function: A comparative study of different rock typing indices". Petroleum Research. 6: 16–25. doi:10.1016/j.ptlrs.2020.08.001.
  5. ^ Wang, R. (2019). "Grid density overlapping hierarchical algorithm for clustering of carbonate reservoir rock types: A case from Mishrif Formation of West Qurna-1 oilfield, Iraq". Journal of Petroleum Science and Engineering. 182: 106209. doi:10.1016/j.petrol.2019.106209. S2CID 198327827.
  6. ^ Noorbakhsh, A. (2020). "Field Production Optimization Using Sequential Quadratic Programming (SQP) Algorithm in ESP-Implemented Wells, A Comparison Approach". Journal of Petroleum Science and Technology. Retrieved 6 August 2020.
  7. ^ Nazari, M.H. (2019). "Investigation of factors influencing geological heterogeneity in tight gas carbonates, Permian reservoir of the Persian Gulf". Journal of Petroleum Science and Engineering. 183: 106341. doi:10.1016/j.petrol.2019.106341. S2CID 202080296.
  8. ^ Liu, Y. (2019). "Petrophysical static rock typing for carbonate reservoirs based on mercury injection capillary pressure curves using principal component analysis". Journal of Petroleum Science and Engineering. 181: 106175. doi:10.1016/j.petrol.2019.06.039. S2CID 197095683.
  9. ^ Shakiba, M. (2020). "An experimental investigation of the proportion of mortar components on physical and geomechanical characteristics of unconsolidated artificial reservoir sandstones". Journal of Petroleum Science and Engineering. 189: 107022. doi:10.1016/j.petrol.2020.107022. S2CID 214481575.
  10. ^ Huang, R. (2020). "Research on Dynamic Simulation System of Multidimensional Reservoirs". 2020 IEEE International Conference on Power, Intelligent Computing and Systems (ICPICS). pp. 96–99. doi:10.1109/ICPICS50287.2020.9202339. ISBN 978-1-7281-9874-3. S2CID 221914057.