Jump to content

Cyclododecatriene

From Wikipedia, the free encyclopedia
trans,trans,cis-1,5,9-Cyclododecatriene
Names
Preferred IUPAC name
(1Z,5E,9E)-Cyclododeca-1,5,9-triene
Identifiers
3D model (JSmol)
Abbreviations CDT; 1,5,9-CDT
ChemSpider
ECHA InfoCard 100.023.212 Edit this at Wikidata
UNII
  • InChI=1S/C12H18/c1-2-4-6-8-10-12-11-9-7-5-3-1/h1-2,7-10H,3-6,11-12H2/b2-1-,9-7+,10-8+
    Key: ZOLLIQAKMYWTBR-RYMQXAEESA-N
  • (trans,trans,cis-1,5,9): InChI=1/C12H18/c1-2-4-6-8-10-12-11-9-7-5-3-1/h1-2,7-10H,3-6,11-12H2/b2-1-,9-7+,10-8+
    Key: ZOLLIQAKMYWTBR-RYMQXAEEBC
  • C1C\C=C\CC\C=C/CC\C=C\1
Properties
C12H18
Molar mass 162.276 g·mol−1
Appearance Colorless liquid
Density 0.89 g/mL[1]
Melting point −18 °C (0 °F; 255 K)[1]
Boiling point 231 °C (448 °F; 504 K)[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Cyclododecatrienes are cyclic trienes with the formula C12H18. Four isomers are known for 1,5,9-cyclododecatriene. The trans,trans,cis-isomer is a precursor in the production of nylon-12.

The four isomers of 1,5,9-cyclododecatriene. Left to right: all-cis; all-trans; cis,trans,trans; and cis,cis,trans

Production

[edit]

The trans,trans,cis-isomer is obtained by cyclotrimerization of butadiene catalyzed by a mixture of titanium tetrachloride and an organoaluminium co-catalyst. Production capacity in 1995 was 8000 tons.[2]

Cyclododeca-1,5,9-triene

As aforementioned, titanium catalysts predominantly produce the important cis,trans,trans- isomer. The all-trans isomer is, however, the product from nickel- and chromium-catalyzed trimerization reactions. The yield of cyclododecatriene through these methods is often greater than 80%. The principal side products are the dimers and oligomers of butadiene.[3]

Properties

[edit]

All of the isomers of 1,5,9-cyclododecatriene are colorless, possess typical terpene-like odors, and have low melting points. The all-trans isomer melts at 34 °C while the other three isomers melt below room temperature. All of the isomers behave like typical olefins. The all-trans and cis,trans,trans isomers in particular tend to form complexes with transition metals.[4] They also undergo transannular reactions and isomerization.[5]

Application

[edit]

Cyclododecatriene is the raw material for the production of dodecanedioic acid (4) through hydrogenation to cyclododecane (2) followed by air oxidation in the presence of boric acid at elevated temperatures to a mixture of the alcohol (3a) and the ketone (3b). In the final step this mixture oxidized further by nitric acid:

Dodecanoic acidSynthesis

The alcohol (3a) and the ketone (3b) can be purified from the alcohol/ketone mixture under different reaction conditions. Pure cyclododecanol (3a) can be produced from the hydrogenation of the mixture in the presence of a copper-chromium catalyst at 30 MPa and 160 ˚C. Pure cyclododecanone (3b) can be produced through the dehydrogenation of the mixture over copper or copper-chromium catalysts on an active support at a temperature range of 230–245 ˚C and atmospheric pressure. Pure cyclododecanone can then be converted into cyclododecanone oxime, which yields laurolactam after Beckmann rearrangement. Laurolactam is the precursor to several plastics, such as polyamide 12, which is also known as nylon 12.[6]

2012 Evonik fire

[edit]

In March 2012, a fire at the Marl Chemical Park operated by Evonik Industries[7] in Marl, Germany,[8] stopped production for an expected duration of several months. The plant produced a substantial proportion of the world's production of CDT, particularly that needed to produce laurolactam, a precursor to the polyamide PA12. This in turn led to concerns for global production of finished goods, particularly in the automotive industry.[9] Other biobased polyamides, not dependent on laurolactam or CDT, have been put forward as alternative materials.[8]

References

[edit]
  1. ^ a b c "trans,trans,cis-1,5,9-Cyclododecatriene". Sigma-Aldrich.
  2. ^ Klaus Weissermel, Hans-Jurgen Arpe (1997). Industrial Organic Chemistry (3rd ed.). John Wiley & Sons. ISBN 3-527-28838-4.
  3. ^ Oenbrink, G.; Schiffer, T. (2013). Ullmann's Encyclopedia of Industrial Chemistry: Cyclododecatriene, Cyclooctadiene, and 4-Vinylcyclohexene. John Wiley & Sons. p. Vol. 2.
  4. ^ Wilke, G. (1988). "COntributions to Organo-NIckel Chemistry". Angew. Chem. Int. Ed. Engl. 27: 185–206. doi:10.1002/anie.198801851.
  5. ^ "High Performance Building Blocks: 1,5,9-Cyclododecatriene (CDT)" (PDF). Evonik Industries. Evonik Industries. Archived from the original (PDF) on 2014-10-06. Retrieved 2014-11-21.
  6. ^ Schiffer, T.; Oenbrink, G. (2009). Ullmann's Encyclopedia of Industrial Chemistry: Cyclododecanol, Cyclododecanone, and Laurolactam. Wiley-VCH.
  7. ^ commercial supplier Degussa
  8. ^ a b "Fire at the CDT plant on the grounds of the Marl Chemicals Park". Press Release. Evonik Industries. 4 April 2012.
  9. ^ Stephen Evans (19 April 2012). "Fire in small German town could curb world car production". BBC News Online.