Jump to content

Smith & Wesson Model 30

From Wikipedia, the free encyclopedia
Smith & Wesson Model 30
TypeRevolver
Place of originUnited States
Production history
ManufacturerSmith & Wesson
Produced1903–1976
Specifications
Length
  • 8 inches (200 mm) with 4 in (100 mm) barrel
Barrel length
  • 2 inches (51 mm)
  • 3 inches (76 mm)
  • 4 inches (100 mm)
  • 6 inches (150 mm)

Cartridge
ActionDouble-action
Feed systemSix round cylinder
Sightsfixed

The Smith & Wesson Model 30 is a small-frame, six-shot, double-action revolver chambered for the .32 Long cartridge. It was based on the Smith & Wesson Hand Ejector Model of 1903, and could be had with either a blued or nickel finish. It was a "round butt" I-frame and was produced from 1948 to 1960 and was replaced by the J-frame Model 30–1, which remained in production until 1976.[1]

History

[edit]

From 1948 to 1957, this model was known as the "Model .32 Hand Ejector" and was built on the 5-screw I-Frame. In 1958 the frame was redesigned to use four screws and a coiled mainspring as opposed to a flat or leaf spring and called the "Improved I-Frame". Three years later in 1961, the "I-Frame" was discontinued and the slightly longer 3-screw "J-Frame" replaced it.[1]

Variants

[edit]

A square-butt version first known as the "Model .32 Regulation Police" was made during the same time period as the "Model .32 Hand Ejector" and was eventually replaced by the Model 31 in 1958. The Model 31 followed the same path as the Model 30 with regard to production dates.[1]

References

[edit]
  1. ^ a b c Supica, Jim; Richard Nahas (2007). Standard Catalog of Smith & Wesson (3 ed.). Iola, Wisconsin: F+W Media, Inc. pp. 204–205. ISBN 978-0-89689-293-4.